Boiler does not respond to custom value EMS-ESP gateway

emsesp / EMS-ESP32

ESP32 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps

https://emsesp.github.io/docs

GNU Lesser General Public License v3.0

589 stars 100 forks source link

Boiler does not respond to custom value EMS-ESP gateway #762

Closed MarkRoks closed 1 year ago

MarkRoks commented 1 year ago

Hello,

I have a Nefit Trendline HRC30 CW5 boiler, with an EMS-ESP gateway with firmware v3.4.4. It is possible to adjust the "pump delay" and the "burner min period" through the EMS-ESP gateway. However, it is suspected that nothing will happen with the adjusted values.

For example, I set the "pump delay" to 10 minutes and the "burner min period" to 12 minutes. However, the pump switches off after a few minutes after the boiler has stopped heating for a short time.

When applying other values, nothing actually changes what the boiler actually does.

Greetings,

Pomp Verwarmen EMS-ESP

proddy commented 1 year ago

Can you provide more details? Like

a trace from the console when you're setting the values so we can see the Boiler's response
do the values get reset in the EMS-ESP UI after you set them?
what thermostat are you using? It may be trying to be too smart and overriding the values
see https://emsesp.github.io/docs/#/Support?id=support

MarkRoks commented 1 year ago

Hi Prody,

I have a Nefit Easy (Logamatic TC100) thermostat.

Just set the "pump delay" back to 2 minutes. He adjusts this neatly in the overview on the web page.

I have added a log of the system as an export below. Perhaps this will provide more clarity.

Regards,

EMS-ESP-export.txt

Pomp-1