search

energia / Energia

Fork of Arduino for the Texas Instruments LaunchPad's
http://energia.nu
Other
795 stars 672 forks source link

SoftwareSerial For cc13xx #964

Closed roboflank closed 7 years ago

roboflank commented 7 years ago

Thank you for opening an issue on the Energia repository.

Do not use GitHub issues for project related questions.

Use instead the 43oh forum and TI E2E forum, so everyone can share the questions and answers.

Describe the expected results.

Am trying to do a Software Serial on cc1310 Board. The current core cc13xx library seems not to support it. I've tried to port the msp430 lib but no results. Any workaround would be appreciated

roboflank commented 7 years ago

Porting the Arduino library throws the error below

`/home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:260:2: error: #error This version of SoftwareSerial supports only 20, 16 and 8MHz processors

error This version of SoftwareSerial supports only 20, 16 and 8MHz processors

^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp: In member function 'bool SoftwareSerial::listen()': /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:316:23: error: 'SREG' was not declared in this scope uint8_t oldSREG = SREG; ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:317:9: error: 'cli' was not declared in this scope cli(); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp: In member function 'void SoftwareSerial::setTX(uint8_t)': /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:491:44: error: 'digitalPinToBitMask' was not declared in this scope _transmitBitMask = digitalPinToBitMask(tx); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:492:37: error: 'digitalPinToPort' was not declared in this scope uint8_t port = digitalPinToPort(tx); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:493:50: error: 'portOutputRegister' was not declared in this scope _transmitPortRegister = portOutputRegister(port); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp: In member function 'void SoftwareSerial::setRX(uint8_t)': /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:502:43: error: 'digitalPinToBitMask' was not declared in this scope _receiveBitMask = digitalPinToBitMask(rx); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:503:37: error: 'digitalPinToPort' was not declared in this scope uint8_t port = digitalPinToPort(rx); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:504:48: error: 'portInputRegister' was not declared in this scope _receivePortRegister = portInputRegister(port); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp: In member function 'void SoftwareSerial::begin(long int)': /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:515:31: error: 'table' was not declared in this scope for (unsigned i=0; i<sizeof(table)/sizeof(table[0]); ++i) ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:531:38: error: 'digitalPinToPCICR' was not declared in this scope if (digitalPinToPCICR(_receivePin)) ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:533:78: error: 'digitalPinToPCICRbit' was not declared in this scope digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin)); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:533:79: error: '_BV' was not declared in this scope digitalPinToPCICR(_receivePin) |= _BV(digitalPinToPCICRbit(_receivePin)); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:534:37: error: 'digitalPinToPCMSK' was not declared in this scope digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin)); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:534:78: error: 'digitalPinToPCMSKbit' was not declared in this scope digitalPinToPCMSK(_receivePin) |= _BV(digitalPinToPCMSKbit(_receivePin)); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp: In member function 'void SoftwareSerial::end()': /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:549:36: error: 'digitalPinToPCMSK' was not declared in this scope if (digitalPinToPCMSK(_receivePin)) ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:550:77: error: 'digitalPinToPCMSKbit' was not declared in this scope digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin)); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:550:78: error: '_BV' was not declared in this scope digitalPinToPCMSK(_receivePin) &= ~_BV(digitalPinToPCMSKbit(_receivePin)); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp: In member function 'virtual size_t SoftwareSerial::write(uint8_t)': /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:585:21: error: 'SREG' was not declared in this scope uint8_t oldSREG = SREG; ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:586:7: error: 'cli' was not declared in this scope cli(); // turn off interrupts for a clean txmit ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:590:26: error: 'XMIT_START_ADJUSTMENT' was not declared in this scope tunedDelay(_tx_delay + XMIT_START_ADJUSTMENT); ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp: In member function 'virtual void SoftwareSerial::flush()': /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:633:21: error: 'SREG' was not declared in this scope uint8_t oldSREG = SREG; ^ /home/wamburu/Energia/libraries/SoftwareSerial-master/SoftwareSerial.cpp:634:7: error: 'cli' was not declared in this scope cli(); ^ exit status 1 Error compiling for board LaunchPad w/ cc1310 EMT (48MHz).`

rei-vilo commented 7 years ago

Please post your question to the 43oh forum.

About libraries: