Open girardja opened 2 weeks ago
Hi Jack and Simon,
If I read your intent correctly, you should study the Standalone scenario. Start with 42/Standalone/Readme.txt.
Regards, -Eric
Hi Eric,
Thank you for your quick response,
I will try to rephrase the question as I suppose that an example can really help in this case :
We are using 42 with NOS3, we would like to adapt the 42 configuration files in the /InOut folder in order to have 2 FSW (on separate VMs) discussing with 42.
For example we have modified the Inp_Sim.txt as follow :
And we were trying to understand how we should modify the Inp_IPC.txt ...
For example :
1- Is this the right way to do it ? Are we missing something ? (we will keep studying the doc I promise 😉... But for now, it is not fully clear...)
2 - Concerning the Inp_IPC.txt files in the Tx, Rx folders, do we have to modify also these files or not ? How should we specify to 42 to send the data to the 2 VMs and to listen from the 2 VMs ?
Thank you for your help,
Best Regards,
Simon
Considering 2 satellites on 2 different VM (VM1, VM2) and another VM (VM42) for 42
Can anybody indicate us the configuration to put on each VM to have 42 operationnal ?
We have identified these four files that seems to define this configuration Inp_IPC.txt Rx Inp_IPC.txt Tx Inp_Sim.txt in InOut directory Inp_NOS3.txt ? Are there other configuration files ?
Are there any examples or documentation to help us.
Thank you for your help
Jack & Simon