Running the latest available version for TinySA Ultra (1.4-165).
I noticed a problem related on the Signal Generator with AM Modulation. If you reach a level inferior to -59dBm and you keep pushing the +1dB touch button, once the level reaches -59dBm, the +1dB button does not increase the value anymore. The +10dB button still works.
Hard to describe in words, maybe a video explains better ?
It doesn't matter if you first turn the SigGen ON followed by setting the AM modulation, or you set AM mod first then turn on the SigGen. Sometimes it gets "stuck" at -58.5dBm.
More rarely, using the same buttons, I get a popup with "Output level reduced". This popup seems to "freeze" a bit the UI. I can't reproduce it reliably for now ... but it also stops me from using the buttons to change the output level - since it constantly appears. Not sure if the two issues are related though ..
Hello,
Running the latest available version for TinySA Ultra (1.4-165).
I noticed a problem related on the Signal Generator with AM Modulation. If you reach a level inferior to -59dBm and you keep pushing the +1dB touch button, once the level reaches -59dBm, the +1dB button does not increase the value anymore. The +10dB button still works.
Hard to describe in words, maybe a video explains better ?
https://github.com/erikkaashoek/tinySA/assets/502674/889fc1a1-d3fb-49b8-8dab-e78ff5234be5
It doesn't matter if you first turn the SigGen ON followed by setting the AM modulation, or you set AM mod first then turn on the SigGen. Sometimes it gets "stuck" at -58.5dBm.
More rarely, using the same buttons, I get a popup with "Output level reduced". This popup seems to "freeze" a bit the UI. I can't reproduce it reliably for now ... but it also stops me from using the buttons to change the output level - since it constantly appears. Not sure if the two issues are related though ..
PS: Tried also with 1.4-159, same result.
Thank you!