Issues with Eltrade A1 - Githubissues

skito commented 3 years ago

Hi Guys,

Is there anything special you need to configure with Eltrade A1?

I'm successfully printing on Datecs DP-25, but when using the same request for Eltrade A1, I receive:

E199 Device general error followed by E599 NRA link general error.

Operator defaults are 1 / no password. However there is no difference if I provide wrong operator or not.
The device is production one and working well in manual mode - connected with the NRA device successfully.
The device is discoverable
I'm able to print Z report from http://localhost:8001/

Full request/response log: log.txt

Any thoughts?

iveivanov commented 3 years ago

Hello, Please check the Bulgarian fiscal printer setup: https://github.com/erpnet/ErpNet.FP/blob/master/BGFiscalPrinterSetup.md

skito commented 3 years ago

@iveivanov

Did check it now. The BaudRate is 115200 and the device is in mode „1.Регистрация“ selected. Any other suggestions?

g-vvv commented 3 years ago

Please read your error codes and messages: "type":"error","code":"E599","text":"The internal terminal is not working"... So, you do not have working NRA Terminal. Contact your Eltrade service.

erpnet / ErpNet.FP

Issues with Eltrade A1 #166