search

eruption-project / eruption

Realtime RGB LED Driver for Linux
https://eruption-project.org/
GNU General Public License v3.0
267 stars 33 forks source link

Vulcan TKL support? #37

Open Madcliff opened 3 years ago

Madcliff commented 3 years ago

Does this have support for the new Roccat Vulcan TLK and TKL Pro?

X3n0m0rph59 commented 3 years ago

Hi! The ROCCAT Vulcan TKL series keyboards are not supported yet. I would like to add support for these devices but I don't have the hardware available to test on. If you have access to one of these devices, and are willing to assist, I would need a trace of the device initialization sequence as performed by ROCCAT Swarm, e.g. captured via Wireshark.

Madcliff commented 3 years ago

Once mine ships from Germany I will get around to giving you the output.

On a similar question about device compatibility, what was the status with the Roccat Nyth? I tried recently to use the feature set to do with mice but it didn't seem to want to recognise anything.

Madcliff commented 3 years ago

Ok so how do I get the needed data for the TKL? MIne arrived this morning.

X3n0m0rph59 commented 3 years ago

Please refer to this wiki article on how to get the required protocol traces: https://github.com/X3n0m0rph59/eruption/wiki

On a similar question about device compatibility, what was the status with the Roccat Nyth? I tried recently to use the feature set to do with mice but it didn't seem to want to recognise anything.

The ROCCAT Nyth should be recognized by Eruption, but the state of the driver is experimental at best. Can you post logs of Eruption? (Please open up a separate issue for this)

sudo journalctl -u eruption.service -b
Madcliff commented 3 years ago

Roccat TKL linear switches Should be USB device 27, on hub 1. Hope this is what you require.

roccat_tkl, cap, device 27.pcapng.gz

X3n0m0rph59 commented 3 years ago

The capture looks good! Thank you very much!

I have implemented a driver module for the ROCCAT Vulcan TKL series keyboards, based on the driver for the ROCCAT Vulcan 1xx series keyboards.

You may want to run eruption-debug-tool first, to test if the new driver is at least able to initialize your device.

 $ sudo eruption-debug-tool list
 $ sudo eruption-debug-tool run-tests <device-index of your Vulcan TKL, subdev 0>

Do you want to build from source, or do you prefer me to build a package for you?

Madcliff commented 3 years ago

I would appreciate an arch PKG build if possible. I haven't really worked out how to install the drivers from source.

X3n0m0rph59 commented 3 years ago

I have updated the PKGBUILD now on the master branch.

To build a package from the current state of the master branch please perform these steps:

Madcliff commented 3 years ago

So it would appear the daemon is panicking


 Please stop the Eruption daemon prior to running this tool:
 $ sudo systemctl mask eruption.service && sudo systemctl stop eruption.service

 You can re-enable Eruption with this command afterwards:
 $ sudo systemctl unmask eruption.service && sudo systemctl start eruption.service

Index: 00: ID: 1e7d:2fee ROCCAT/ROCCAT Vulcan TKL Subdev: 0
The application panicked (crashed).
Message:  Could not open LED sub-device: OpenHidDeviceError
Location: eruption-debug-tool/src/hwdevices/mod.rs:113

Backtrace omitted.
Run with RUST_BACKTRACE=1 environment variable to display it.
Run with RUST_BACKTRACE=full to include source snippets.
Aborted
X3n0m0rph59 commented 3 years ago

Thanks for testing!

Did you run sudo systemctl mask eruption.service && sudo systemctl stop eruption.service prior to running the eruption-debug-tool? Otherwise the control device and maybe the LED device will be locked by eruption.

Could you please post the output of:

 $ sudo eruption-debug-tool list
Madcliff commented 3 years ago

output.log

Madcliff commented 3 years ago

I chedked the dmsg logs, found this

Jan 16 11:28:41 malleus eruption[1144194]: WARN eruption::hwdevices::roccat_vulcan_tkl > Outdated firmware version: 115, should be: >136

X3n0m0rph59 commented 3 years ago

Thanks for reporting this, I just corrected the current firmware revision of the ROCCAT Vulcan TKL series keyboard to be 115. The revision of 136 does only apply to the ROCCAT Vulcan 1xx series keyboards.

Do you notice a change in behavior when you select a different sub device when running eruption-debug-tool run-tests? Is the driver able to set the LED colors when you specify a different sub-device of your ROCCAT Vulcan TKL?

Madcliff commented 3 years ago

Only sub device 3 crashes. the others just seem to set the colour of the keyboard to the random rainbow pattern that is the default.

X3n0m0rph59 commented 3 years ago

Only sub device 3 crashes. the others just seem to set the colour of the keyboard to the random rainbow pattern that is the default.

It should initialize the device to AIMO mode, and show a red and blue test pattern.

Did the Wireshark capture file that you made capture the initialization sequence to AIMO mode, or did it capture initialization to the rainbow pattern?

Could you please do a second capture of the device being initialized by Swarm to AIMO mode? I am especially looking for captures of the packets starting with "0xa1, 0x01, 0x01, 0xb4", which should be fairly large and set the color of each of the LEDs on the keyboard device. These packets were missing from the first capture file, so it could very well be that it just contained initialization to the rainbow pattern.

X3n0m0rph59 commented 3 years ago

@Madcliff I just pushed out the latest changes to the driver code. The Wireshark capture that you created seems to be equivalent to the initialization sequence of the ROCCAT Vulcan 100/12x series devices (into rainbow mode).

I now changed the ROCCAT Vulcan TKL driver to use the init sequence of the ROCCAT Vulcan 100/12x keyboards (into AIMO mode). There is at least a slight chance that this will work.

You may compile the latest release using this PKGBUILD: eruption-PKGBUILD.zip

(The eruption daemon as well as the eruption-debug-tool are using the latest code)

Madcliff commented 3 years ago

That package just seems to break everything. Had to revert to package 18.4 to get the drivers working again

X3n0m0rph59 commented 3 years ago

@Madcliff Then could you please try again to capture the init sequence into AIMO mode, as done by ROCCAT Swarm?

Madcliff commented 3 years ago

I will do! Just taking some time to do it because I need to remember how to enable the USB listener before I run Qemu.

Sent from Mailspring (https://getmailspring.com/), the best free email app for work On Jan 21 2021, at 11:55 am, X3n0m0rph59 notifications@github.com wrote:

@Madcliff (https://github.com/Madcliff) Then could you please try again to capture the init sequence into AIMO mode, as done by ROCCAT Swarm? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub (https://github.com/X3n0m0rph59/eruption/issues/37#issuecomment-764593041), or unsubscribe (https://github.com/notifications/unsubscribe-auth/ACVAXJQMFCOQ7KONTIFL67DS3AI2XANCNFSM4VNNB2ZA).

Madcliff commented 3 years ago

Device 1.13 is the TKL. I set it into snake mode first, and then into AIMO wireshark-tkl.zip

X3n0m0rph59 commented 3 years ago

@Madcliff Thank you very much! I have updated eruption as well as eruption-debug-tool, according to the new Wireshark capture file.

You may use the eruption-debug-tool, as described above, to try to initialize the ROCCAT Vulcan TKL to a red/blue test pattern.

eruption-PKGBUILD.zip

Madcliff commented 3 years ago

Still a no go. Will give it another go after the weekend is over.

Madcliff commented 3 years ago

INFO eruption > Starting Eruption - Linux user-mode input and LED driver for keyboards, mice and other devices: Version 0.1.19 INFO eruption > Loading saved state... WARN eruption::state > Invalid saved state: slot_names INFO eruption > Registering plugins... INFO eruption::plugin_manager > Registering plugin: Keyboard - Keyboard related functions INFO eruption::plugin_manager > Registering plugin: Mouse - Mouse related functions INFO eruption::plugin_manager > Registering plugin: Macros - Inject programmable keyboard and mouse events INFO eruption::plugin_manager > Registering plugin: Introspection - Provide runtime status of the Eruption daemon INFO eruption::plugin_manager > Registering plugin: Persistence - A storage and persistence layer for Lua Scripts INFO eruption::plugin_manager > Registering plugin: Profiles - Switch profiles based on system state INFO eruption::plugin_manager > Registering plugin: System - Basic system information and status INFO eruption::plugin_manager > Registering plugin: Sensors - Query system sensor values INFO eruption::plugin_manager > Registering plugin: Audio - Audio related functions INFO eruption::plugins::persistence > Loading persistent state data from disk... INFO eruption > Plugins loaded and initialized successfully INFO eruption > Enumerating connected devices... INFO eruption::hwdevices > Found supported keyboard device: 0x1e7d:0x2fee (0001:000a:00) - ROCCAT ROCCAT Vulcan TKL INFO eruption::hwdevices::roccat_vulcan_tkl > Bound driver: ROCCAT Vulcan TKL INFO eruption::hwdevices > Found supported mouse device: 0x1e7d:0x2e7c (0001:0007:00) - ROCCAT ROCCAT Nyth INFO eruption::hwdevices::roccat_nyth > Bound driver: ROCCAT Nyth INFO eruption > Opening keyboard device... INFO eruption > Initializing keyboard device... INFO eruption > Configuring keyboard LEDs... INFO eruption > Firmware revision: 115 INFO eruption > Spawning keyboard input thread... INFO eruption > Opening mouse device... INFO eruption > Now listening on keyboard: /dev/input/event30 INFO eruption > Input device name: "ROCCAT ROCCAT Vulcan TKL" INFO eruption > Input device ID: bus 0x3 vendor 0x1e7d product 0x2fee INFO eruption > Physical location: usb-0000:00:14.0-1.1.2/input0 INFO eruption > Grabbing the keyboard device exclusively INFO eruption > Initializing mouse device... INFO eruption > Configuring mouse LEDs... INFO eruption > Firmware revision: 138 INFO eruption > Spawning mouse input thread... INFO eruption > Device enumeration completed INFO eruption > Performing late initializations... INFO eruption > Initializing D-Bus API... INFO eruption > Late initializations completed INFO eruption > Startup completed INFO eruption > Switching to profile: mcliff-matrix.profile INFO eruption > Now listening on mouse: /dev/input/event21 INFO eruption > Input device name: "ROCCAT ROCCAT Nyth Mouse" INFO eruption > Input device ID: bus 0x3 vendor 0x1e7d product 0x2e7c INFO eruption > Physical location: usb-0000:00:14.0-1.1.1/input0 INFO eruption > Grabbing the mouse device exclusively ^C INFO eruption::plugins::persistence > Storing persistent state data to disk... INFO eruption > Exiting now

Madcliff commented 3 years ago

So I will be honest, I suspect the TKL and the Regular keyboard config's are clashing and this is meaning I cannot control the keyboard.

Madcliff commented 3 years ago

When I force restart the demon the keys get to a strange flickering pattern rather than whatever profile is set.

RoggeHaj commented 3 years ago

Hi, I ordered a Vulcan Pro TKL that should arrive tuesday. In the meantime I set up the development environment on my Ubuntu-20.10 system and is able to build the master branch using

cargo build --all --release

so I can aid with debugging once I get the keyboard if you'd like.

X3n0m0rph59 commented 3 years ago

@RoggeHaj Much appreciated, thanks!

I am currently working on full support for the ROCCAT Vulcan Pro TKL keyboard. Will push the latest changes to the master branch in a few days.

I hope that this work will aid in getting the ROCCAT Vulcan Pro and the ROCCAT Vulcan TKL supported too.

X3n0m0rph59 commented 3 years ago

@RoggeHaj I have just pushed out the latest changes to the master branch. We now have working (experimental) support for ROCCAT Vulcan Pro TKL series keyboards!

Madcliff commented 3 years ago

I will give this a test once I get my system working again! Ended up without a computer due to reasons!

Sent from Mailspring (https://link.getmailspring.com/link/1A514F3A-514E-437E-B8BA-C58D62AC7AD6@getmailspring.com/0?redirect=https%3A%2F%2Fgetmailspring.com%2F&recipient=cmVwbHkrQUNWQVhKU1NENUJNR1ZFT0c1RkdMQUY2RVQ1VFRFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D), the best free email app for work On Feb 2 2021, at 9:24 am, X3n0m0rph59 notifications@github.com wrote:

@RoggeHaj (https://link.getmailspring.com/link/1A514F3A-514E-437E-B8BA-C58D62AC7AD6@getmailspring.com/1?redirect=https%3A%2F%2Fgithub.com%2FRoggeHaj&recipient=cmVwbHkrQUNWQVhKU1NENUJNR1ZFT0c1RkdMQUY2RVQ1VFRFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D) I have just pushed out the latest changes to the master branch. We now have working (experimental) support for ROCCAT Vulcan Pro TKL series keyboards! — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub (https://link.getmailspring.com/link/1A514F3A-514E-437E-B8BA-C58D62AC7AD6@getmailspring.com/2?redirect=https%3A%2F%2Fgithub.com%2FX3n0m0rph59%2Feruption%2Fissues%2F37%23issuecomment-771494430&recipient=cmVwbHkrQUNWQVhKU1NENUJNR1ZFT0c1RkdMQUY2RVQ1VFRFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D), or unsubscribe (https://link.getmailspring.com/link/1A514F3A-514E-437E-B8BA-C58D62AC7AD6@getmailspring.com/3?redirect=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FACVAXJVSY3HYDMMTEMO33VDS47ADTANCNFSM4VNNB2ZA&recipient=cmVwbHkrQUNWQVhKU1NENUJNR1ZFT0c1RkdMQUY2RVQ1VFRFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D).

X3n0m0rph59 commented 3 years ago

@Madcliff Ok, thank you! I will update the code to support the "non Pro" variant of the ROCCAT Vulcan TKL with mostly the same code as the Pro variant. But please don't expect too much! I can't promise that it will work, since I can only test on the Pro variant of the keyboard.

RoggeHaj commented 3 years ago

@X3n0m0rph59 Sweet. I just got a message from the delivery guys that the keyboard will be delivered in roughly 8 hrs so I can give it a go tonite.

I rebuilt the latest master without any issues, but I guess I need to properly install it to get the service working properly? In the README, the last step in the From Source section is the build step so I'm kind of dead in the water here.

X3n0m0rph59 commented 3 years ago

I have built a pre-release package suitable for Ubuntu 20.04 LTS and Ubuntu 20.10.

eruption-git_0.1.19-ubuntu9_amd64.deb.zip

Please install using the following commands:

 $ unzip eruption-git_0.1.19-ubuntu9_amd64.deb.zip
 $ sudo apt install ./eruption-git_0.1.19-ubuntu9_amd64.deb
X3n0m0rph59 commented 3 years ago

@Madcliff I have adapted Eruption to mostly use the code from the Pro variant for the driver module for ROCCAT Vulcan TKL series keyboards.

I can confirm that this works with the ROCCAT Vulcan TKL Pro. As said before I don't have a ROCCAT Vulcan TKL (non-pro) to test on.

eruption-PKGBUILD.zip

RoggeHaj commented 3 years ago

So, I tried the pre-release package and I must say that I'm really impressed with it. The only thing I've found so far is that after reboot the Win-key was not working until i fired up the eruption-gui.

X3n0m0rph59 commented 3 years ago

@RoggeHaj Thanks for your feedback! If you find more bugs, then please feel free to open up issues any time!

Madcliff commented 3 years ago

So with the new package it does the initialization then it seems to freeze for me. Sent on the go with Vodafone -------- Original message --------From: X3n0m0rph59 notifications@github.com Date: 3/2/21 6:01 am (GMT+00:00) To: X3n0m0rph59/eruption eruption@noreply.github.com Cc: Madcliff maddisonclifford@gmail.com, Mention mention@noreply.github.com Subject: Re: [X3n0m0rph59/eruption] Vulcan TKL support? (#37) @RoggeHaj Thanks for your feedback! If you find more bugs, then please feel free to open up issues any time!

—You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.

X3n0m0rph59 commented 3 years ago

@Madcliff Could you please provide the output of the following commands?

 $ sudo journalctl -u eruption.service -b
 $ sudo systemctl stop eruption.service
 $ sudo RUST_BACKTRACE=full RUST_LOG=debug eruption

I am working on another package, please stay tuned...

Madcliff commented 3 years ago

Output of both commands

-- Journal begins at Tue 2021-02-02 10:49:16 GMT, ends at Wed 2021-02-03 09:26:08 GMT. -- Feb 02 19:20:42 archlinux systemd[1]: Starting Linux user-mode input and LED driver for keyboards, mice and other devices... Feb 02 19:20:42 archlinux systemd[1]: Started Linux user-mode input and LED driver for keyboards, mice and other devices. Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption > Starting Eruption - Linux user-mode input and LED driver for keyboards, mice and other devices: Version 0.1.19 Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption > Loading saved state... Feb 02 19:20:42 archlinux eruption[16729]: WARN eruption::state > Invalid saved state: slot_names Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption > Registering plugins... Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Keyboard - Keyboard related functions Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Mouse - Mouse related functions Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Macros - Inject programmable keyboard and mouse events Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Introspection - Provide runtime status of the Eruption daemon Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Persistence - A storage and persistence layer for Lua Scripts Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Profiles - Switch profiles based on system state Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: System - Basic system information and status Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Sensors - Query system sensor values Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugin_manager > Registering plugin: Audio - Audio related functions Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::plugins::persistence > Loading persistent state data from disk... Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption > Plugins loaded and initialized successfully Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption > Enumerating connected devices... Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::hwdevices > Found supported mouse device: 0x1e7d:0x2e7c (0005:0009:00) - ROCCAT ROCCAT Nyth Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::hwdevices::roccat_nyth > Bound driver: ROCCAT Nyth Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::hwdevices > Found supported keyboard device: 0x1e7d:0x2fee (0005:0008:00) - ROCCAT ROCCAT Vulcan TKL Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption::hwdevices::roccat_vulcan_tkl > Bound driver: ROCCAT Vulcan TKL Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption > Opening keyboard device... Feb 02 19:20:42 archlinux eruption[16729]: INFO eruption > Initializing keyboard device... Feb 02 19:20:43 archlinux eruption[16729]: ERROR eruption::hwdevices::roccat_vulcan_tkl > Invalid result

INFO eruption > Starting Eruption - Linux user-mode input and LED driver for keyboards, mice and other devices: Version 0.1.19 INFO eruption > Loading saved state... WARN eruption::state > Invalid saved state: slot_names INFO eruption > Registering plugins... INFO eruption::plugin_manager > Registering plugin: Keyboard - Keyboard related functions INFO eruption::plugin_manager > Registering plugin: Mouse - Mouse related functions INFO eruption::plugin_manager > Registering plugin: Macros - Inject programmable keyboard and mouse events INFO eruption::plugin_manager > Registering plugin: Introspection - Provide runtime status of the Eruption daemon INFO eruption::plugin_manager > Registering plugin: Persistence - A storage and persistence layer for Lua Scripts INFO eruption::plugin_manager > Registering plugin: Profiles - Switch profiles based on system state INFO eruption::plugin_manager > Registering plugin: System - Basic system information and status INFO eruption::plugin_manager > Registering plugin: Sensors - Query system sensor values INFO eruption::plugin_manager > Registering plugin: Audio - Audio related functions INFO eruption::plugins::persistence > Loading persistent state data from disk... INFO eruption > Plugins loaded and initialized successfully INFO eruption > Enumerating connected devices... DEBUG eruption::hwdevices > Found unsupported HID device: 0x48d:0xc100 - ITE Tech. Inc. ITE Device(8910) DEBUG eruption::hwdevices > Found unsupported HID device: 0xfd9:0x6c - Elgato Stream Deck XL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2e7c - ROCCAT ROCCAT Nyth INFO eruption::hwdevices > Found supported mouse device: 0x1e7d:0x2e7c (0005:000f:00) - ROCCAT ROCCAT Nyth INFO eruption::hwdevices::roccat_nyth > Bound driver: ROCCAT Nyth DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2e7c - ROCCAT ROCCAT Nyth DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL INFO eruption::hwdevices > Found supported keyboard device: 0x1e7d:0x2fee (0005:0011:00) - ROCCAT ROCCAT Vulcan TKL INFO eruption::hwdevices::roccat_vulcan_tkl > Bound driver: ROCCAT Vulcan TKL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL INFO eruption > Opening keyboard device... INFO eruption > Initializing keyboard device... ERROR eruption::hwdevices::roccat_vulcan_tkl > Invalid result INFO eruption > Configuring keyboard LEDs... INFO eruption > Firmware revision: 115 INFO eruption > Spawning keyboard input thread... INFO eruption > Opening mouse device... ERROR eruption > Error opening the mouse device: Could not open the device file ERROR eruption > This could be a permission problem, or maybe the device is locked by another process? INFO eruption > Initializing mouse device... ERROR eruption > Could not initialize the device: Device not opened INFO eruption > Configuring mouse LEDs... ERROR eruption > Could not initialize LEDs: Device not opened INFO eruption > Firmware revision: INFO eruption > Spawning mouse input thread... INFO eruption > Device enumeration completed INFO eruption > Performing late initializations... INFO eruption > Initializing D-Bus API... DEBUG eruption > Registering filesystem watcher... INFO eruption > Late initializations completed INFO eruption > Startup completed DEBUG eruption > Entering the main loop now... INFO eruption > Switching to profile: netfx.profile DEBUG eruption::dbus_interface > Message: Message { Type: Signal, Path: "/org/freedesktop/DBus", Interface: "org.freedesktop.DBus", Member: "NameAcquired", Sender: "org.freedesktop.DBus", Destination: ":1.341", Serial: 2, Args: [":1.341"] } DEBUG eruption::dbus_interface > Message: Message { Type: Signal, Path: "/org/freedesktop/DBus", Interface: "org.freedesktop.DBus", Member: "NameAcquired", Sender: "org.freedesktop.DBus", Destination: ":1.341", Serial: 3, Args: ["org.eruption"] } DEBUG eruption::scripting::script > Applying parameter Float { name: "animation_delay", description: "Step animation every [n] frames", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_highlight", description: "Highlight color", default: 4279242768 } DEBUG eruption::scripting::script > Applying parameter Float { name: "highlight_opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter Float { name: "overlay_opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter Int { name: "highlight_step", description: "Step TTL value for highlight effect each frame by [n]", default: 32 } DEBUG eruption::scripting::script > Applying parameter Int { name: "overlay_step", description: "Step TTL value for overlays each frame by [n]", default: 6 } DEBUG eruption::scripting::script > Applying parameter Float { name: "opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter String { name: "requires", description: "Import macro definitions sub-module", default: "macros/user-macros" } DEBUG eruption::scripting::script > Applying parameter String { name: "bind_address", description: "The ip address to bind to", default: "127.0.0.1" } DEBUG eruption::scripting::script > Applying parameter Int { name: "port", description: "The port number to bind to", default: 2359 } DEBUG eruption::scripting::script > Applying parameter Float { name: "opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_afterglow", description: "Afterglow color", default: 4294967295 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_step_afterglow", description: "Color value that gets subtracted from afterglow every [n] frames", default: 134217728 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_shockwave", description: "Color of the shockwave", default: 4294901760 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_step_shockwave", description: "Color value that gets subtracted from the shockwave every [n] frames", default: 168427520 } DEBUG eruption::scripting::script > Applying parameter Int { name: "shockwave_divisor", description: "Controls the spread of the shockwave. Range: [1..10], lower values mean less spread", default: 5 } DEBUG eruption::scripting::script > Applying parameter Bool { name: "mouse_events", description: "React on mouse events", default: true } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_mouse_click_flash", description: "Color of flash effect shown on mouse button clicks", default: 553626282 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_mouse_wheel_flash", description: "Color of flash effect shown on mouse wheel scroll", default: 1084926719 } DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'keyboards/roccat_vulcan_pro_tkl.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'keyboards/roccat_vulcan_pro_tkl.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'keyboards/roccat_vulcan_pro_tkl.lua' DEBUG eruption::hwdevices > Picking evdev device: /dev/input/event20 DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'mice/roccat_kone_pure_ultra.lua' INFO eruption > Now listening on keyboard: /dev/input/event20 INFO eruption > Input device name: "ROCCAT ROCCAT Vulcan TKL" INFO eruption > Input device ID: bus 0x3 vendor 0x1e7d product 0x2fee INFO eruption > Physical location: usb-0000:06:00.4-1.1.1.1/input0 INFO eruption > Grabbing the keyboard device exclusively DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'mice/roccat_kone_pure_ultra.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'mice/roccat_kone_pure_ultra.lua' DEBUG eruption::hwdevices > Picking evdev device: /dev/input/event28 INFO eruption > Now listening on mouse: /dev/input/event28 INFO eruption > Input device name: "ROCCAT ROCCAT Nyth Mouse" INFO eruption > Input device ID: bus 0x3 vendor 0x1e7d product 0x2e7c INFO eruption > Physical location: usb-0000:06:00.4-1.1.1.2/input0 INFO eruption > Grabbing the mouse device exclusively INFO eruption::scripting::script::callbacks > Network FX: Server now listening on 127.0.0.1:2359 ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened

Sent from Mailspring (https://link.getmailspring.com/link/ABF829EA-63A9-4920-8613-C496B7A58E54@getmailspring.com/0?redirect=https%3A%2F%2Fgetmailspring.com%2F&recipient=cmVwbHkrQUNWQVhKVVRZS0dQVVlVTDUyQlRXRUY2RVpFM1pFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D), the best free email app for work On Feb 3 2021, at 9:11 am, X3n0m0rph59 notifications@github.com wrote:

@Madcliff (https://link.getmailspring.com/link/ABF829EA-63A9-4920-8613-C496B7A58E54@getmailspring.com/1?redirect=https%3A%2F%2Fgithub.com%2FMadcliff&recipient=cmVwbHkrQUNWQVhKVVRZS0dQVVlVTDUyQlRXRUY2RVpFM1pFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D) Could you please provide the output of the following commands? $ sudo journalctl -u eruption.service -b $ sudo systemctl stop eruption.service $ sudo RUST_BACKTRACE=full RUST_LOG=debug eruption I am working on another package, please stay tuned...

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub (https://link.getmailspring.com/link/ABF829EA-63A9-4920-8613-C496B7A58E54@getmailspring.com/2?redirect=https%3A%2F%2Fgithub.com%2FX3n0m0rph59%2Feruption%2Fissues%2F37%23issuecomment-772354428&recipient=cmVwbHkrQUNWQVhKVVRZS0dQVVlVTDUyQlRXRUY2RVpFM1pFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D), or unsubscribe (https://link.getmailspring.com/link/ABF829EA-63A9-4920-8613-C496B7A58E54@getmailspring.com/3?redirect=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FACVAXJUHYWTJQGRG6KBKHK3S5EHLZANCNFSM4VNNB2ZA&recipient=cmVwbHkrQUNWQVhKVVRZS0dQVVlVTDUyQlRXRUY2RVpFM1pFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D).

X3n0m0rph59 commented 3 years ago

I changed the way that Eruption sends LED state data to the keyboard. But judging from the log output, I bet that it still won't work, because Eruption fails to initialize the device earlier. Could you please redo the Wireshark packet capture? I mostly need the initialization sequence that SWARM sends to the device (to AIMO mode). This initialization sequence is missing from the previous packet captures.

You can get the data like this:

I have updated the PKGBUILD on the master branch. eruption-PKGBUILD.zip

To build a package from the current state of the master branch please perform these steps:

RoggeHaj commented 3 years ago

I noticed a discrepancy between the key assignment in the eruption-gui and the keys on the Vulcan TKL Pro keyboard. It was very obvious for the Gaming: Generic profile as can be seen in the screenshot Screenshot from 2021-02-04 11-03-52

On the keyboard, the W A S D are lit as intended.

I tried with both the eruption-gui from your comment 2 days ago

eruption-git_0.1.19-ubuntu9_amd64.deb.zip

and the eruption-gui from master (8aa90ab9a72b4849fa2678fe0fbc0484d3493eea) with similar results.

X3n0m0rph59 commented 3 years ago

@RoggeHaj thanks for reporting this issue! The GUI is not ready for prime time yet, it is still missing many even the most basic features. The next tech preview 0.0.3 will include support for TKL keyboard variants. I am currently working on that. Version 0.0.2 of the GUI just supports the standard form factor keyboards (ROCCAT Vulcan 100/12x).

I will build a new pre-release package in a few days, please stay tuned!

Madcliff commented 3 years ago

I have tried to do another USB dump. Let's see if it has what you need. it defaulted to AIMO, I moved the settings from AIMO, but always back in the direction of AIMO. It should be device 30 on hub 5, and device 31 after I reconnected it.

Sent from Mailspring (https://link.getmailspring.com/link/B6A4C0A2-D472-4D6E-B75F-4DA36E9AAAA6@getmailspring.com/0?redirect=https%3A%2F%2Fgetmailspring.com%2F&recipient=cmVwbHkrQUNWQVhKVFhQNFZMQjc3QjQ1QzNUQUY2RTdFV1RFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D), the best free email app for work On Feb 4 2021, at 12:28 pm, X3n0m0rph59 notifications@github.com wrote:

@RoggeHaj (https://link.getmailspring.com/link/B6A4C0A2-D472-4D6E-B75F-4DA36E9AAAA6@getmailspring.com/1?redirect=https%3A%2F%2Fgithub.com%2FRoggeHaj&recipient=cmVwbHkrQUNWQVhKVFhQNFZMQjc3QjQ1QzNUQUY2RTdFV1RFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D) thanks for reporting this issue! The GUI is not ready for prime time yet, it is still missing many even the most basic features. The next tech preview 0.0.3 will include support for TKL keyboard variants. I am currently working on that. Version 0.0.2 of the GUI just supports the standard form factor keyboards (ROCCAT Vulcan 100/12x). I will build a new pre-release package in a few days, please stay tuned! — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub (https://link.getmailspring.com/link/B6A4C0A2-D472-4D6E-B75F-4DA36E9AAAA6@getmailspring.com/2?redirect=https%3A%2F%2Fgithub.com%2FX3n0m0rph59%2Feruption%2Fissues%2F37%23issuecomment-773269906&recipient=cmVwbHkrQUNWQVhKVFhQNFZMQjc3QjQ1QzNUQUY2RTdFV1RFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D), or unsubscribe (https://link.getmailspring.com/link/B6A4C0A2-D472-4D6E-B75F-4DA36E9AAAA6@getmailspring.com/3?redirect=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FACVAXJXNLAHW5HDATB4FC2DS5KHGTANCNFSM4VNNB2ZA&recipient=cmVwbHkrQUNWQVhKVFhQNFZMQjc3QjQ1QzNUQUY2RTdFV1RFVkJOSEhDNFFGNFFNQHJlcGx5LmdpdGh1Yi5jb20%3D).

X3n0m0rph59 commented 3 years ago

@Madcliff The attached file seems to be missing!

Madcliff commented 3 years ago

usbdump.pcapng.gz

Madcliff commented 3 years ago

That worked!

X3n0m0rph59 commented 3 years ago

@Madcliff Thank you for the capture file! The trace contained much more usable information this time. I have adapted the respective driver sub-module. There is at least a slight chance that it might work!

eruption-PKGBUILD.zip

Madcliff commented 3 years ago

[mcliff@archlinux eruption]$ sudo systemctl stop eruption.service [mcliff@archlinux eruption]$ sudo RUST_BACKTRACE=full RUST_LOG=debug eruption

Eruption is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

Eruption is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with Eruption. If not, see http://www.gnu.org/licenses/.

INFO eruption > Starting Eruption - Linux user-mode input and LED driver for keyboards, mice and other devices: Version 0.1.19 INFO eruption > Loading saved state... WARN eruption::state > Invalid saved state: slot_names INFO eruption > Registering plugins... INFO eruption::plugin_manager > Registering plugin: Keyboard - Keyboard related functions INFO eruption::plugin_manager > Registering plugin: Mouse - Mouse related functions INFO eruption::plugin_manager > Registering plugin: Macros - Inject programmable keyboard and mouse events INFO eruption::plugin_manager > Registering plugin: Introspection - Provide runtime status of the Eruption daemon INFO eruption::plugin_manager > Registering plugin: Persistence - A storage and persistence layer for Lua Scripts INFO eruption::plugin_manager > Registering plugin: Profiles - Switch profiles based on system state INFO eruption::plugin_manager > Registering plugin: System - Basic system information and status INFO eruption::plugin_manager > Registering plugin: Sensors - Query system sensor values INFO eruption::plugin_manager > Registering plugin: Audio - Audio related functions INFO eruption::plugins::persistence > Loading persistent state data from disk... INFO eruption > Plugins loaded and initialized successfully INFO eruption > Enumerating connected devices... DEBUG eruption::hwdevices > Found unsupported HID device: 0x48d:0xc100 - ITE Tech. Inc. ITE Device(8910) DEBUG eruption::hwdevices > Found unsupported HID device: 0xfd9:0x6c - Elgato Stream Deck XL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2e7c - ROCCAT ROCCAT Nyth INFO eruption::hwdevices > Found supported mouse device: 0x1e7d:0x2e7c (0005:0009:00) - ROCCAT ROCCAT Nyth INFO eruption::hwdevices::roccat_nyth > Bound driver: ROCCAT Nyth DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2e7c - ROCCAT ROCCAT Nyth DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL INFO eruption::hwdevices > Found supported keyboard device: 0x1e7d:0x2fee (0005:000c:00) - ROCCAT ROCCAT Vulcan TKL INFO eruption::hwdevices::roccat_vulcan_tkl > Bound driver: ROCCAT Vulcan TKL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL DEBUG eruption::hwdevices > Found supported HID device: 0x1e7d:0x2fee - ROCCAT ROCCAT Vulcan TKL INFO eruption > Opening keyboard device... INFO eruption > Initializing keyboard device... INFO eruption > Configuring keyboard LEDs... INFO eruption > Firmware revision: 115 INFO eruption > Spawning keyboard input thread... INFO eruption > Opening mouse device... ERROR eruption > Error opening the mouse device: Could not open the device file ERROR eruption > This could be a permission problem, or maybe the device is locked by another process? INFO eruption > Initializing mouse device... ERROR eruption > Could not initialize the device: Device not opened INFO eruption > Configuring mouse LEDs... ERROR eruption > Could not initialize LEDs: Device not opened INFO eruption > Firmware revision: INFO eruption > Spawning mouse input thread... INFO eruption > Device enumeration completed INFO eruption > Performing late initializations... INFO eruption > Initializing D-Bus API... DEBUG eruption > Registering filesystem watcher... INFO eruption > Late initializations completed INFO eruption > Startup completed DEBUG eruption > Entering the main loop now... INFO eruption > Switching to profile: netfx.profile DEBUG eruption::dbus_interface > Message: Message { Type: Signal, Path: "/org/freedesktop/DBus", Interface: "org.freedesktop.DBus", Member: "NameAcquired", Sender: "org.freedesktop.DBus", Destination: ":1.62", Serial: 2, Args: [":1.62"] } DEBUG eruption::dbus_interface > Message: Message { Type: Signal, Path: "/org/freedesktop/DBus", Interface: "org.freedesktop.DBus", Member: "NameAcquired", Sender: "org.freedesktop.DBus", Destination: ":1.62", Serial: 3, Args: ["org.eruption"] } DEBUG eruption::hwdevices > Picking evdev device: /dev/input/event25 DEBUG eruption::scripting::script > Applying parameter String { name: "bind_address", description: "The ip address to bind to", default: "127.0.0.1" } DEBUG eruption::scripting::script > Applying parameter Int { name: "port", description: "The port number to bind to", default: 2359 } DEBUG eruption::scripting::script > Applying parameter Float { name: "opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } INFO eruption > Now listening on keyboard: /dev/input/event25 INFO eruption > Input device name: "ROCCAT ROCCAT Vulcan TKL" INFO eruption > Input device ID: bus 0x3 vendor 0x1e7d product 0x2fee INFO eruption > Physical location: usb-0000:06:00.4-1.2.1.1/input0 INFO eruption > Grabbing the keyboard device exclusively DEBUG eruption::scripting::script > Applying parameter Color { name: "color_afterglow", description: "Afterglow color", default: 4294967295 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_step_afterglow", description: "Color value that gets subtracted from afterglow every [n] frames", default: 134217728 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_shockwave", description: "Color of the shockwave", default: 4294901760 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_step_shockwave", description: "Color value that gets subtracted from the shockwave every [n] frames", default: 168427520 } DEBUG eruption::scripting::script > Applying parameter Int { name: "shockwave_divisor", description: "Controls the spread of the shockwave. Range: [1..10], lower values mean less spread", default: 5 } DEBUG eruption::scripting::script > Applying parameter Bool { name: "mouse_events", description: "React on mouse events", default: true } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_mouse_click_flash", description: "Color of flash effect shown on mouse button clicks", default: 553626282 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_mouse_wheel_flash", description: "Color of flash effect shown on mouse wheel scroll", default: 1084926719 } DEBUG eruption::scripting::script > Applying parameter Float { name: "animation_delay", description: "Step animation every [n] frames", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter Color { name: "color_highlight", description: "Highlight color", default: 4279242768 } DEBUG eruption::scripting::script > Applying parameter Float { name: "highlight_opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter Float { name: "overlay_opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter Int { name: "highlight_step", description: "Step TTL value for highlight effect each frame by [n]", default: 32 } DEBUG eruption::scripting::script > Applying parameter Int { name: "overlay_step", description: "Step TTL value for overlays each frame by [n]", default: 6 } DEBUG eruption::scripting::script > Applying parameter Float { name: "opacity", description: "Opacity value in the range 0.0 .. 1.0, where 1.0 is fully opaque", default: 1.0 } DEBUG eruption::scripting::script > Applying parameter String { name: "requires", description: "Import macro definitions sub-module", default: "macros/user-macros" } DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'keyboards/roccat_vulcan_pro_tkl.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'keyboards/roccat_vulcan_pro_tkl.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'keyboards/roccat_vulcan_pro_tkl.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'mice/roccat_kone_pure_ultra.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'mice/roccat_kone_pure_ultra.lua' DEBUG eruption::scripting::script::callbacks > Loading device specific Lua script: 'mice/roccat_kone_pure_ultra.lua' INFO eruption::scripting::script::callbacks > Network FX: Server now listening on 127.0.0.1:2359 DEBUG eruption::hwdevices > Picking evdev device: /dev/input/event18 INFO eruption > Now listening on mouse: /dev/input/event18 INFO eruption > Input device name: "ROCCAT ROCCAT Nyth Mouse" INFO eruption > Input device ID: bus 0x3 vendor 0x1e7d product 0x2e7c INFO eruption > Physical location: usb-0000:06:00.4-1.2.1.2/input0 INFO eruption > Grabbing the mouse device exclusively ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened DEBUG eruption > FPS: 17 ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened DEBUG eruption > FPS: 18 ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened DEBUG eruption > FPS: 18 ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened DEBUG eruption > FPS: 7 DEBUG eruption > FPS: 0 DEBUG eruption > FPS: 0 DEBUG eruption::scripting::script::callbacks > Macros: Key down: Index: 6 DEBUG eruption::scripting::script::callbacks > Macros: HID event: 2 args: 23 ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened ERROR eruption > Could not send the LED map to the device: Device not opened DEBUG eruption::scripting::script::callbacks > Macros: Key down: Index: 6 ERROR eruption > Could not send the LED map to the device: Device not opened DEBUG eruption::scripting::script::callbacks > Macros: Key down: Index: 6 DEBUG eruption > FPS: 4 DEBUG eruption::scripting::script::callbacks > Macros: Key down: Index: 6 ERROR eruption > Could not send the LED map to the device: Device not opened DEBUG eruption::scripting::script::callbacks > Macros: HID event: 2 args: 46 DEBUG eruption::scripting::script::callbacks > Macros: Key down: Index: 28 ^C DEBUG eruption > Left the main loop INFO eruption::scripting::script::callbacks > Network FX: Server shutting down INFO eruption::plugins::persistence > Storing persistent state data to disk... ERROR eruption > Could not finalize LEDs configuration: Device not opened WARN eruption > Could not close the device: Device not opened DEBUG eruption > Saving state... INFO eruption > Exiting now

Though I feel like the actual config is working, just not the LED's

Madcliff commented 3 years ago

Feb 04 21:54:59 archlinux systemd[1]: Stopped Linux user-mode input and LED driver for keyboards, mice and other devices. Feb 04 21:55:08 archlinux systemd[1]: Starting Linux user-mode input and LED driver for keyboards, mice and other devices... Feb 04 21:55:08 archlinux systemd[1]: Started Linux user-mode input and LED driver for keyboards, mice and other devices. Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption > Starting Eruption - Linux user-mode input and LED driver for keyboards, mice and other devices: Version 0.1.19 Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption > Loading saved state... Feb 04 21:55:08 archlinux eruption[4596]: WARN eruption::state > Invalid saved state: slot_names Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption > Registering plugins... Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Keyboard - Keyboard related functions Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Mouse - Mouse related functions Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Macros - Inject programmable keyboard and mouse events Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Introspection - Provide runtime status of the Eruption daemon Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Persistence - A storage and persistence layer for Lua Scripts Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Profiles - Switch profiles based on system state Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: System - Basic system information and status Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Sensors - Query system sensor values Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugin_manager > Registering plugin: Audio - Audio related functions Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::plugins::persistence > Loading persistent state data from disk... Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption > Plugins loaded and initialized successfully Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption > Enumerating connected devices... Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::hwdevices > Found supported mouse device: 0x1e7d:0x2e7c (0005:0009:00) - ROCCAT ROCCAT Nyth Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::hwdevices::roccat_nyth > Bound driver: ROCCAT Nyth Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::hwdevices > Found supported keyboard device: 0x1e7d:0x2fee (0005:000b:00) - ROCCAT ROCCAT Vulcan TKL Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption::hwdevices::roccat_vulcan_tkl > Bound driver: ROCCAT Vulcan TKL Feb 04 21:55:08 archlinux eruption[4596]: INFO eruption > Opening keyboard device... Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Initializing keyboard device... Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Configuring keyboard LEDs... Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Firmware revision: 115 Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Spawning keyboard input thread... Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Opening mouse device... Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Initializing mouse device... Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Now listening on keyboard: /dev/input/event25 Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Input device name: "ROCCAT ROCCAT Vulcan TKL" Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Input device ID: bus 0x3 vendor 0x1e7d product 0x2fee Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Physical location: usb-0000:06:00.4-1.2.1.1/input0 Feb 04 21:55:09 archlinux eruption[4596]: INFO eruption > Grabbing the keyboard device exclusively Feb 04 21:55:14 archlinux eruption[4596]: ERROR eruption > Fatal: Keyboard device went away: No such device (os error 19)

Madcliff commented 3 years ago

More findings, running the backtrace sorta works, but it is very buggy. When I run sudo backtrace it applies the LED profiles even while telling me that the LED device cannot be accessed, But running the driver normally doesn't work at all.

Also macros appear to not work yet :-D

X3n0m0rph59 commented 3 years ago

@Madcliff So did you see the LEDs light up? The logs from your latest post seem to indicate that it successfully initialized the keyboard device.

Do you see a red and blue test pattern when you run the commands:

$ sudo systemctl mask eruption.service && sudo systemctl stop eruption.service
$ sudo eruption-debug-tool list

 Please stop the Eruption daemon prior to running this tool:
 $ sudo systemctl mask eruption.service && sudo systemctl stop eruption.service

 You can re-enable Eruption with this command afterwards:
 $ sudo systemctl unmask eruption.service && sudo systemctl start eruption.service

Please find the device you want to debug below and use its respective
index number (column 1) as the device index for the other sub-commands of this tool

Index: 00: ID: 1e7d:2dd2 ROCCAT/ROCCAT Kone Pure Ultra Subdev: 0
Index: 01: ID: 1e7d:2dd2 ROCCAT/ROCCAT Kone Pure Ultra Subdev: 1
Index: 02: ID: 1e7d:2dd2 ROCCAT/ROCCAT Kone Pure Ultra Subdev: 2
Index: 03: ID: 1e7d:2dd2 ROCCAT/ROCCAT Kone Pure Ultra Subdev: 3
Index: 04: ID: 1e7d:311a ROCCAT/ROCCAT Vulcan Pro TKL Subdev: 0
Index: 05: ID: 1e7d:311a ROCCAT/ROCCAT Vulcan Pro TKL Subdev: 1
Index: 06: ID: 1e7d:311a ROCCAT/ROCCAT Vulcan Pro TKL Subdev: 2
Index: 07: ID: 1e7d:311a ROCCAT/ROCCAT Vulcan Pro TKL Subdev: 3

Enumeration completed

On my system, subdev 1 of the ROCCAT Vulcan Pro TKL has index 5. So I continue with that one...

$ sudo RUST_LOG=debug eruption-debug-tool run-tests 5 

 Please stop the Eruption daemon prior to running this tool:
 $ sudo systemctl mask eruption.service && sudo systemctl stop eruption.service

 You can re-enable Eruption with this command afterwards:
 $ sudo systemctl unmask eruption.service && sudo systemctl start eruption.service

Index: 05: ID: 1e7d:311a ROCCAT/ROCCAT Vulcan Pro TKL Subdev: 1
Bound driver: ROCCAT Vulcan Pro TKL

The keyboard should now switch from showing red LEDs to showing blue LEDs. Please tell me if this works for you!

To re-enable the systemd unit please run this command:

$ sudo systemctl unmask eruption.service && sudo systemctl restart eruption.service