lz4cat symlink points to $DESTDIR

[GoogleCodeExporter]

After building a package with the r115, I got the following error message from 
the package checker.
lz4 E: Symlink (usr/bin/lz4cat) points to non-existing 
/build/lz4/pkg/lz4/usr/bin/lz4

As you can see in the package listing:

 $ tar tvf lz4-115-1-x86_64.pkg.tar.xz 
-rw-r--r-- root/root       581 2014-03-23 12:49 .PKGINFO
-rw-r--r-- root/root       802 2014-03-23 12:49 .MTREE
drwxr-xr-x root/root         0 2014-03-23 12:49 usr/
drwxr-xr-x root/root         0 2014-03-23 12:49 usr/lib/
drwxr-xr-x root/root         0 2014-03-23 12:49 usr/include/
drwxr-xr-x root/root         0 2014-03-23 12:49 usr/bin/
drwxr-xr-x root/root         0 2014-03-23 12:49 usr/share/
drwxr-xr-x root/root         0 2014-03-23 12:49 usr/share/man/
drwxr-xr-x root/root         0 2014-03-23 12:49 usr/share/man/man1/
-rw-r--r-- root/root       878 2014-03-23 12:49 usr/share/man/man1/lz4.1.gz
lrwxrwxrwx root/root         0 2014-03-23 12:49 usr/bin/lz4cat -> 
/build/lz4/pkg/lz4/usr/bin/lz4
-rwxr-xr-x root/root     60592 2014-03-23 12:49 usr/bin/lz4
-rwxr-xr-x root/root     61552 2014-03-23 12:49 usr/bin/lz4c
-rwxr-xr-x root/root     12316 2014-03-23 12:49 usr/include/lz4.h
-rwxr-xr-x root/root      8763 2014-03-23 12:49 usr/include/lz4hc.h
lrwxrwxrwx root/root         0 2014-03-23 12:49 usr/lib/liblz4.so.1 -> 
liblz4.so.1.0.0
lrwxrwxrwx root/root         0 2014-03-23 12:49 usr/lib/liblz4.so -> 
liblz4.so.1.0.0
-rwxr-xr-x root/root     32056 2014-03-23 12:49 usr/lib/liblz4.so.1.0.0

usr/bin/lz4cat should points to /usr/bin/lz4 (or in this case lz4)

Original issue reported on code.google.com by sebastien.luttringer on 23 Mar 2014 at 11:54

[GoogleCodeExporter]

ok, I guess the problem is that the link should be relative, instead of 
absolute.
Will correct that.

Sidenote : it would be better if I could perform the same installation test as 
yours, it would allow to detect all these conditions before publication

Original comment by yann.col...@gmail.com on 23 Mar 2014 at 12:00

[GoogleCodeExporter]

Original comment by yann.col...@gmail.com on 23 Mar 2014 at 12:00

• Changed state: Accepted

[GoogleCodeExporter]

You can have an archlinux chroot, use this PKGBUILD[1], and the devtools to 
build the package. All freely available.

[1] 
https://projects.archlinux.org/svntogit/community.git/tree/trunk?h=packages/lz4

Original comment by sebastien.luttringer on 23 Mar 2014 at 12:15

[GoogleCodeExporter]

Please find in attached file a hotfix for issue 124 & 125.
It regenerate CFLAGS correction, which somehow disappeared from r115, 
and makes lz4cat link relative, to make it work using above installation script.

Original comment by yann.col...@gmail.com on 23 Mar 2014 at 12:15

Attachments:

• lz4-r116.tar.gz

[GoogleCodeExporter]

Here is another rc116, which should not change anything on Linux (it just 
conforms to a different naming convention of dynamic libraries for OSX).

I'm relying on your test to know if it works properly or not.
I realize that having the package working fine on my test system is not enough.

Original comment by yann.col...@gmail.com on 23 Mar 2014 at 1:52

Attachments:

• lz4-r116.tar.gz

[GoogleCodeExporter]

Now it's make install which fail.

==> Starting build()...
compiling static library
compiling dynamic library
creating versioned links
make[1]: Entering directory '/build/lz4/src/lz4/programs'
cc      -I.. -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector 
--param=ssp-buffer-size=4 -I. -std=c99 -O3 -Wall -W -Wundef 
-DLZ4_VERSION=\"r116\" -DDISABLE_LZ4C_LEGACY_OPTIONS ../lz4.c ../lz4hc.c 
bench.c xxhash.c lz4io.c lz4cli.c -o lz4
cc      -I.. -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector 
--param=ssp-buffer-size=4 -I. -std=c99 -O3 -Wall -W -Wundef 
-DLZ4_VERSION=\"r116\" ../lz4.c ../lz4hc.c bench.c xxhash.c lz4io.c lz4cli.c -o 
lz4c
make[1]: Leaving directory '/build/lz4/src/lz4/programs'
==> Starting check()...
Compressed 323 bytes into 251 bytes ==> 77.71%                                 
Successfully decoded 323 bytes                                                 
==> Entering fakeroot environment...
==> Starting package()...
compiling static library
compiling dynamic library
creating versioned links
ln: failed to create symbolic link 'liblz4.so.1': File exists
Makefile:92: recipe for target 'liblz4' failed
make: *** [liblz4] Error 1
==> ERROR: A failure occurred in package().
    Aborting...

==> ERROR: Build failed, check /var/lib/archbuild/extra-x86_64/seblu/build

Original comment by sebastien.luttringer on 24 Mar 2014 at 12:19

[GoogleCodeExporter]

build() {
  cd $pkgname
  make
}

package() {
  cd $pkgname
  make install DESTDIR="$pkgdir"
}

Original comment by sebastien.luttringer on 24 Mar 2014 at 12:20

[GoogleCodeExporter]

Indeed.

The issue can happen if compilation was performed before, typically :
make
and then 
make install
will try to duplicate the link, which is not useful since the link is already 
there.

The temporary solution is to :
make clean
before
make install

But I guess something more foolproof would be preferable.

Original comment by yann.col...@gmail.com on 24 Mar 2014 at 1:15

[GoogleCodeExporter]

The following rc attempts to correct the duplicate link creation issue
by issuing the -f (force) command.

make
followed by
make install
seems to work fine on my Linux test system now.

Regards

Original comment by yann.col...@gmail.com on 24 Mar 2014 at 1:27

Attachments:

• lz4-r116.tar.gz

[GoogleCodeExporter]

Yes. We typically call make, after we call a check function and we install. If 
you clean and rebuild, the two compilation may differ. Although there is few 
file to compile, this will double the compilation time.

You can use add the switch -f to ln to avoid this error.

As you didn't release yet, it could be a good idea to fix this before releasing 
116.

Original comment by sebastien.luttringer on 24 Mar 2014 at 1:28

[GoogleCodeExporter]

Hi Sebastien

Did the last rc passed your test suite ?
I would like to publish r116 quickly, but it would be a pity if yet another 
issue slipped through.

As a sidenote :
I tried to build an ArchLinux configuration which would be able to recreate 
your tests conditions, but miserably failed.
I guess the simplest way for me would be to run the test within a ready-to-use 
VM. Does such a download exist ?

Regards

Original comment by yann.col...@gmail.com on 24 Mar 2014 at 4:43

[GoogleCodeExporter]

The latest RC did not pass the test. There is failure in make install. Did you 
release a new tarball with "ln -s"?

Original comment by sebastien.luttringer on 24 Mar 2014 at 7:54

[GoogleCodeExporter]

well, yes, it's just above in the thread

Original comment by yann.col...@gmail.com on 24 Mar 2014 at 8:28

[GoogleCodeExporter]

Oh, yes, I missed it :) Everything seems ok.

$ tar tvf ./lz4-116-1-x86_64.pkg.tar.xz 
-rw-r--r-- root/root       581 2014-03-24 21:53 .PKGINFO
-rw-r--r-- root/root       791 2014-03-24 21:53 .MTREE
drwxr-xr-x root/root         0 2014-03-24 21:53 usr/
drwxr-xr-x root/root         0 2014-03-24 21:53 usr/lib/
drwxr-xr-x root/root         0 2014-03-24 21:53 usr/include/
drwxr-xr-x root/root         0 2014-03-24 21:53 usr/bin/
drwxr-xr-x root/root         0 2014-03-24 21:53 usr/share/
drwxr-xr-x root/root         0 2014-03-24 21:53 usr/share/man/
drwxr-xr-x root/root         0 2014-03-24 21:53 usr/share/man/man1/
-rw-r--r-- root/root       878 2014-03-24 21:53 usr/share/man/man1/lz4.1.gz
lrwxrwxrwx root/root         0 2014-03-24 21:53 usr/bin/lz4cat -> lz4
-rwxr-xr-x root/root     60816 2014-03-24 21:53 usr/bin/lz4
-rwxr-xr-x root/root     61760 2014-03-24 21:53 usr/bin/lz4c
-rwxr-xr-x root/root     12316 2014-03-24 21:53 usr/include/lz4.h
-rwxr-xr-x root/root      8763 2014-03-24 21:53 usr/include/lz4hc.h
lrwxrwxrwx root/root         0 2014-03-24 21:53 usr/lib/liblz4.so.1 -> 
liblz4.so.1.0.0
lrwxrwxrwx root/root         0 2014-03-24 21:53 usr/lib/liblz4.so -> 
liblz4.so.1.0.0
-rwxr-xr-x root/root     32056 2014-03-24 21:53 usr/lib/liblz4.so.1.0.0

Original comment by sebastien.luttringer on 24 Mar 2014 at 8:54

[GoogleCodeExporter]

great thanks !

I'm going to publish it

Original comment by yann.col...@gmail.com on 24 Mar 2014 at 8:59

[GoogleCodeExporter]

Fixed into r116

Original comment by yann.col...@gmail.com on 24 Mar 2014 at 9:01

• Changed state: Fixed