Firstly I am not sure why esp_adf is here because if I understand correctly, it is only for S3 box.
But even without it, nothing works.
I set up wake word with a wyoming-porcupine1 Docker container (on Podman) and its entity is discovered in Home Assistant.
I selected a wake word in my language when setting up the Assistant, Porcupine1 is selected as wake word engine.
But nothing happens when saying the selected word.
Not sure for the light as I am blind, but nothing is logged by running esphome logs except voice_assistant is waiting.
I tried to disable wake word switch. voice_assistant and microphone are switched off as expected but when pressing the button some seconds to be sure, nothing happens in the log, in fact nothing happens at all.
When restarting the board it logs Assistant is waiting but if I talk, nothing happens at all and if switch it off by long-pressing the button, if I do it again voice_assistant stays idle.
I don't think it comes specifically from my board because the following firmware, using push to talk for assist, works:
I would like to test wake word and even without it, having Assist working with the first firmware using a way or another and I really don't understand what I miss.
Tested with esphome 2023.11 and 2023.12 with the same results.
I have uploaded the following firmware, modified from the original:
Firstly I am not sure why esp_adf is here because if I understand correctly, it is only for S3 box. But even without it, nothing works.
I set up wake word with a wyoming-porcupine1 Docker container (on Podman) and its entity is discovered in Home Assistant. I selected a wake word in my language when setting up the Assistant, Porcupine1 is selected as wake word engine.
But nothing happens when saying the selected word. Not sure for the light as I am blind, but nothing is logged by running esphome logs except voice_assistant is waiting.
I tried to disable wake word switch. voice_assistant and microphone are switched off as expected but when pressing the button some seconds to be sure, nothing happens in the log, in fact nothing happens at all. When restarting the board it logs Assistant is waiting but if I talk, nothing happens at all and if switch it off by long-pressing the button, if I do it again voice_assistant stays idle.
I don't think it comes specifically from my board because the following firmware, using push to talk for assist, works:
I would like to test wake word and even without it, having Assist working with the first firmware using a way or another and I really don't understand what I miss.
Tested with esphome 2023.11 and 2023.12 with the same results.