pzemac issue with filters

[juavinas]

Hello,

I have issues with pzemac in esphome, he doesn't support filters. Here is example:

sensor:

• platform: pzemac voltage: name: "PZEM-004T V3 Monitor Voltage" unit_of_measurement: V current: name: "PZEM-004T V3 Monitor Current" unit_of_measurement: A energy: name: "PZEM-004T V3 Monitor Energy" power: name: "PZEM-004T V3 Monitor Power"

  id: pzem_power

  unit_of_measurement: W id: "power_temp_Wattage" frequency: name: "PZEM-004T V3 Monitor Frequency" unit_of_measurement: hz power_factor: name: "PZEM-004T V3 Monitor Power Factor" update_interval: 5s

• platform: total_daily_energy name: "energy_temp_Total Daily Energy" power_id: "power_temp_Wattage" filters:

  Multiplication factor from W to kW is 0.001

  • multiply: 0.001 unit_of_measurement: kWh

& here is from validation:

INFO Reading configuration /config/esphome/pzem_test.yaml... ERROR Error while reading config: Invalid YAML syntax:

while parsing a block collection in "/config/esphome/pzem_test.yaml", line 70, column 7:

• multiply: 0.001 ^ expected , but found '?' in "/config/esphome/pzem_test.yaml", line 71, column 7: unit_of_measurement: kWh ^

[close-issue-app[bot]]

This issue was auto-closed because the issue template was not filled out. The ESPHome developers invest lots of time to maintain this project, so please at least fill out the issue template so that a bunch of standard questions don't need to be asked again each time. Thank you for taking the time to report a bug, hopefully it can be resolved soon.