I found that if the Nextion is powered at the same time as the esp it is not detected. If you turn off only the Nextion and then turn it on again, the esp reads it... But only at 9600 baud rate... I tried the configuration of the Esphome example by also inserting the lines of code on the Nextion side but at 115200 it really doesn't go either with esp8266 and with esp32
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
The problem
I found that if the Nextion is powered at the same time as the esp it is not detected. If you turn off only the Nextion and then turn it on again, the esp reads it... But only at 9600 baud rate... I tried the configuration of the Esphome example by also inserting the lines of code on the Nextion side but at 115200 it really doesn't go either with esp8266 and with esp32
Which version of ESPHome has the issue?
2022.12.3
What type of installation are you using?
Home Assistant Add-on
Which version of Home Assistant has the issue?
No response
What platform are you using?
ESP32
Board
2022.11.3
Component causing the issue
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response