Cannot get the onboard LED to light with a simple script copied from Jeff Geerling here i just grabbed the code to blink the LED and pasted it to the bottom of a new ESPHome Device.
The device does get a network connection.
Which version of ESPHome has the issue?
2023.4.2
What type of installation are you using?
Home Assistant Add-on
Which version of Home Assistant has the issue?
2023.4.6
What platform are you using?
RP2040
Board
pico W
Component causing the issue
No response
Example YAML snippet
esphome:
name: test
friendly_name: test
rp2040:
board: rpipicow
framework:
# Required until https://github.com/platformio/platform-raspberrypi/pull/36 is merged
platform_version: https://github.com/maxgerhardt/platform-raspberrypi.git
# Enable logging
logger:
# Enable Home Assistant API
api:
encryption:
key: ""
ota:
password: ""
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# Enable fallback hotspot in case wifi connection fails
ap:
ssid: "Test Fallback Hotspot"
password: ""
output:
- platform: gpio
pin:
number: 25
mode: output
id: LED
interval:
- interval: 500ms
then:
- output.turn_on: LED
- delay: 250ms
- output.turn_off: LED
github issues are not for support requests. Come ask on discord or one of the forums.
Pin 25 is for not-w picos. Use LED as the pin number. That works for both.
The problem
Cannot get the onboard LED to light with a simple script copied from Jeff Geerling here i just grabbed the code to blink the LED and pasted it to the bottom of a new ESPHome Device.
The device does get a network connection.
Which version of ESPHome has the issue?
2023.4.2
What type of installation are you using?
Home Assistant Add-on
Which version of Home Assistant has the issue?
2023.4.6
What platform are you using?
RP2040
Board
pico W
Component causing the issue
No response
Example YAML snippet
Anything in the logs that might be useful for us?
Additional information
I am also unable to read from a DHT22 sensor.