Wiring diagram for SPS30 is incorrect. Ground & Select is switched in the current documentation. Please find attached a fixed image + fixed wording. Under section marked Wiring please change the last sentence to
"To force the sensor into I²C mode, the SEL pin (Interface Select pin no.4) should be shorted to ground (pin no.5)"
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
The problem
Wiring diagram for SPS30 is incorrect. Ground & Select is switched in the current documentation. Please find attached a fixed image + fixed wording. Under section marked Wiring please change the last sentence to "To force the sensor into I²C mode, the SEL pin (Interface Select pin no.4) should be shorted to ground (pin no.5)"
Which version of ESPHome has the issue?
Current version
What type of installation are you using?
Home Assistant Add-on
Which version of Home Assistant has the issue?
N/A
What platform are you using?
ESP8266
Board
N/A
Component causing the issue
SPS30 Documentation
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
No response