Closed Richspr closed 1 week ago
Are You sure current firmware compiled with ota:
?
Looks no OTA port (8266 on ESP8266) listening on device.
Hope no multiple network segments and network firewalls towards device.
Thanks for the reply, can I check what you mean with Looks no OTA should that be Looks on OTA ?
HI these are the two error message that I am getting when I try to up date the device. The first appears at the bottom of the screen when I try to update from the HA update list.
Failed to call service update/install. Error updating localbytes-plug-pm-8ca045.yaml via OTA; Try again in ESPHome dashboard for more information
The one below is from the device Logs localbytes-plug-pm-8ca045.yaml
INFO ESPHome 2024.2.2 INFO Reading configuration /config/esphome/localbytes-plug-pm-8ca045.yaml... INFO Starting log output from 192.168.1.49 using esphome API WARNING Can't connect to ESPHome API for localbytes-plug-pm-8ca045 @ 192.168.1.49: Error connecting to [AddrInfo(family=<AddressFamily.AF_INET: 2>, type=<SocketKind.SOCK_STREAM: 1>, proto=6, sockaddr=IPv4Sockaddr(address='192.168.1.49', port=6053))]: [Errno 111] Connect call failed ('192.168.1.49', 6053) (SocketAPIError) INFO Trying to connect to localbytes-plug-pm-8ca045 @ 192.168.1.49 in the background
Hi, I have the latest update on the plug. I reset up the device and reconnect the device to wifi it is now showning the firmware as 2024.2.2. Not sure what was going on but will wait to see if the next update goes smoothly. Thanks Again
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
The problem
HI, After updating to 2024.2.2 when I then try to update my device to this version of ESPHome I get the following error at the end of the process.
INFO Successfully compiled program. INFO Connecting to 192.168.1.49 ERROR Connecting to 192.168.1.49:8266 failed: [Errno 111] Connection refused
The device is not updating and still showing the previous version 2024.2.0
(the connection is the 192.168.1.49 show on my wifi hub as connected and on line - I am using a fixed the IP address which is .49)
On the ESPhome UI the plug is showing ONLINE in black text not green.
Device info shows the following plug-pm by localbytes Firmware: 2024.2.0 (Feb 23 2024, 16:37:09) Hardware: 1.1.0 MAC: D8:BC:38:8C:A0:45
Congfigurationshows 2024.2.2
Fairly new to HA so not an expert so any suggestions on how to resolve this would be helpful.
Which version of ESPHome has the issue?
2024.2.2
What type of installation are you using?
Home Assistant Add-on
Which version of Home Assistant has the issue?
core-2024.3.0
What platform are you using?
ESP8266
Board
esp01_1m
Component causing the issue
ESPHome
Example YAML snippet
Anything in the logs that might be useful for us?
Additional information
No response