esp_bt_controller_init error 259 on esp-idf project with arduino as component

manuprendlair commented 5 years ago

I have an esp-idf project with arduino as components. I try the ble uart example. Evrything compile now. But on serial console I have this message when I run the example:

[E][BLEDevice.cpp:356] init(): esp_bt_controller_init: rc=259 Unknown ESP_ERR error.

I found this error come from

errRc = esp_bt_controller_init(&bt_cfg); (line 354)

and in esp_bt_controller_init method, the error come from esp-idf file : components\bt\bt.c, line 1040:

   //if all the bt available memory was already released, cannot initialize bluetooth controller
 if (btdm_dram_available_region[0].mode == ESP_BT_MODE_IDLE) {
        return ESP_ERR_INVALID_STATE;
    }

I use the sdkconfig from the espressif/esp 32 arduino core and (this time) the esp-idf component is the same who was use to compile the arduino core (comit id : d3e562907).

If I test the ble example in a pure arduino project, the example work and I am able to discover the uart service on my phone

Now I dont know where to search.

Emmanuel From France.

manuprendlair commented 5 years ago

This message come when this line is executed BLEDevice::init("UART Service");

chegewara commented 5 years ago

First idea is memory shortage.

manuprendlair commented 5 years ago

@chegewara , the same sketch run on a native Arduino sketch for ESP32. Normaly all my esp-idf project setup should be same as the one for the actual esp32 arduino core ..but it look it's not.. :-( But I am really not an expert esp-ide toolchain! Hope me no dev could have an idea of what's happend because I really not know where to search! The main difference is I use visualGDB on visual studio (sorry for command line purist) I could share my project if somebody want to compile it under native espressif tool chain. (https://github.com/manuprendlair/ESP_IDF_ARDUINO_BLE_TEST)

chegewara commented 5 years ago

Strange, code looks like one of example, easy code.

manuprendlair commented 5 years ago

Ok, so I start from the default sdkconfig and run menuconfig directly this time (not by visualgdb). I activate ble and bluedroid with default value, here my sdkconfig:

#
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
#
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000

#
# SDK tool configuration
#
CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=y
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y
CONFIG_ENABLE_ARDUINO_DEPENDS=y
CONFIG_AUTOSTART_ARDUINO=y
# CONFIG_ARDUINO_RUN_CORE0 is not set
CONFIG_ARDUINO_RUN_CORE1=y
# CONFIG_ARDUINO_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_RUNNING_CORE=1
# CONFIG_ARDUINO_EVENT_RUN_CORE0 is not set
CONFIG_ARDUINO_EVENT_RUN_CORE1=y
# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
# CONFIG_ARDUINO_UDP_RUN_CORE0 is not set
CONFIG_ARDUINO_UDP_RUN_CORE1=y
# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_UDP_RUNNING_CORE=1
# CONFIG_DISABLE_HAL_LOCKS is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_NONE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR=y
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_WARN is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=1
# CONFIG_ARDUHAL_LOG_COLORS is not set
# CONFIG_ARDUHAL_ESP_LOG is not set
CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT=y
# CONFIG_ARDUHAL_PARTITION_SCHEME_MINIMAL is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_HUGE_APP is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS is not set
CONFIG_ARDUHAL_PARTITION_SCHEME="default"
# CONFIG_AUTOCONNECT_WIFI is not set
# CONFIG_ARDUINO_SELECTIVE_COMPILATION is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
CONFIG_LOG_BOOTLOADER_LEVEL=3
# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_BOOT_ENABLED is not set
# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
# CONFIG_FLASHMODE_QIO is not set
# CONFIG_FLASHMODE_QOUT is not set
CONFIG_FLASHMODE_DIO=y
# CONFIG_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE="dio"
# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
# CONFIG_MONITOR_BAUD_9600B is not set
# CONFIG_MONITOR_BAUD_57600B is not set
CONFIG_MONITOR_BAUD_115200B=y
# CONFIG_MONITOR_BAUD_230400B is not set
# CONFIG_MONITOR_BAUD_921600B is not set
# CONFIG_MONITOR_BAUD_2MB is not set
# CONFIG_MONITOR_BAUD_OTHER is not set
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200
CONFIG_BLINK_GPIO=5
CONFIG_OPTIMIZATION_LEVEL_DEBUG=y
# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
# CONFIG_CXX_EXCEPTIONS is not set
CONFIG_STACK_CHECK_NONE=y
# CONFIG_STACK_CHECK_NORM is not set
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
# CONFIG_STACK_CHECK is not set
# CONFIG_WARN_WRITE_STRINGS is not set
# CONFIG_DISABLE_GCC8_WARNINGS is not set
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_COLORS=y
CONFIG_HEAP_POISONING_DISABLED=y
# CONFIG_HEAP_POISONING_LIGHT is not set
# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
# CONFIG_HEAP_TRACING is not set
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
# CONFIG_ESP32_APPTRACE_ENABLE is not set
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
# CONFIG_FREERTOS_UNICORE is not set
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_HZ=100
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
# CONFIG_FREERTOS_ASSERT_DISABLE is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
CONFIG_FREERTOS_ISR_STACKSIZE=1536
# CONFIG_FREERTOS_LEGACY_HOOKS is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
# CONFIG_SUPPORT_STATIC_ALLOCATION is not set
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
# CONFIG_FREERTOS_DEBUG_INTERNALS is not set
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
# CONFIG_ADC_FORCE_XPD_FSM is not set
CONFIG_ADC2_DISABLE_DAC=y
# CONFIG_SPI_MASTER_IN_IRAM is not set
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
# CONFIG_SPI_SLAVE_IN_IRAM is not set
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_DMA_RX_BUF_NUM=10
CONFIG_DMA_TX_BUF_NUM=10
CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE=y
CONFIG_EMAC_CHECK_LINK_PERIOD_MS=2000
CONFIG_EMAC_TASK_PRIORITY=20
CONFIG_EMAC_TASK_STACK_SIZE=3072
# CONFIG_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_MAX_SOCKETS=10
# CONFIG_USE_ONLY_LWIP_SELECT is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=y
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
# CONFIG_LWIP_IP_FRAG is not set
# CONFIG_LWIP_IP_REASSEMBLY is not set
# CONFIG_LWIP_STATS is not set
# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=6
CONFIG_TCP_MSS=1436
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=3072
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_PPP_SUPPORT is not set
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
CONFIG_LWIP_MAX_RAW_PCBS=16
CONFIG_IP_LOST_TIMER_INTERVAL=120
CONFIG_TCPIP_LWIP=y
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
# CONFIG_SPI_FLASH_YIELD_DURING_ERASE is not set
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
# CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN is not set
# CONFIG_MBEDTLS_DEBUG is not set
CONFIG_MBEDTLS_HARDWARE_AES=y
# CONFIG_MBEDTLS_HARDWARE_MPI is not set
# CONFIG_MBEDTLS_HARDWARE_SHA is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
# CONFIG_MBEDTLS_TLS_DISABLED is not set
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y
CONFIG_MBEDTLS_PSK_MODES=y
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_AES_C=y
# CONFIG_MBEDTLS_CAMELLIA_C is not set
# CONFIG_MBEDTLS_DES_C is not set
CONFIG_MBEDTLS_RC4_DISABLED=y
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
# CONFIG_MBEDTLS_RC4_ENABLED is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
# CONFIG_MBEDTLS_RIPEMD160_C is not set
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_ESP32_REV_MIN_0=y
# CONFIG_ESP32_REV_MIN_1 is not set
# CONFIG_ESP32_REV_MIN_2 is not set
# CONFIG_ESP32_REV_MIN_3 is not set
CONFIG_ESP32_REV_MIN=0
CONFIG_ESP32_DPORT_WORKAROUND=y
CONFIG_ESP32_DEFAULT_CPU_FREQ_80=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_160 is not set
# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=80
# CONFIG_SPIRAM_SUPPORT is not set
# CONFIG_MEMMAP_TRACEMEM is not set
# CONFIG_MEMMAP_TRACEMEM_TWOBANKS is not set
# CONFIG_ESP32_TRAX is not set
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
# CONFIG_ESP32_ENABLE_COREDUMP is not set
# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=3584
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
# CONFIG_ULP_COPROC_ENABLED is not set
CONFIG_ULP_COPROC_RESERVE_MEM=0
# CONFIG_ESP32_PANIC_PRINT_HALT is not set
CONFIG_ESP32_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32_PANIC_GDBSTUB is not set
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_ESP32_DEBUG_STUBS_ENABLE=y
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_INT_WDT_CHECK_CPU1=y
CONFIG_TASK_WDT=y
# CONFIG_TASK_WDT_PANIC is not set
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
CONFIG_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_REDUCE_PHY_TX_POWER=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP32_XTAL_FREQ_40=y
# CONFIG_ESP32_XTAL_FREQ_26 is not set
# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
CONFIG_ESP32_XTAL_FREQ=40
# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_ESP_TIMER_PROFILING is not set
# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5
CONFIG_SW_COEXIST_ENABLE=y
# CONFIG_SW_COEXIST_PREFERENCE_WIFI is not set
# CONFIG_SW_COEXIST_PREFERENCE_BT is not set
CONFIG_SW_COEXIST_PREFERENCE_BALANCE=y
CONFIG_SW_COEXIST_PREFERENCE_VALUE=2
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_IRAM_OPT=y
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
# CONFIG_PM_ENABLE is not set
CONFIG_MDNS_MAX_SERVICES=10
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
CONFIG_FATFS_CODEPAGE_437=y
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
# CONFIG_FATFS_CODEPAGE_850 is not set
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=437
CONFIG_FATFS_LFN_NONE=y
# CONFIG_FATFS_LFN_HEAP is not set
# CONFIG_FATFS_LFN_STACK is not set
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
CONFIG_SPIFFS_MAX_PARTITIONS=3
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
# CONFIG_OPENSSL_DEBUG is not set
CONFIG_OPENSSL_ASSERT_DO_NOTHING=y
# CONFIG_OPENSSL_ASSERT_EXIT is not set
CONFIG_BT_ENABLED=y
CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY=y
# CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY is not set
# CONFIG_BTDM_CONTROLLER_MODE_BTDM is not set
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN=3
CONFIG_BTDM_CONTROLLER_BR_EDR_SCO_DATA_PATH_EFF=0
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=3
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_0=y
# CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE_1 is not set
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI=y
# CONFIG_BTDM_CONTROLLER_HCI_MODE_UART_H4 is not set
CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=y
CONFIG_BTDM_MODEM_SLEEP_MODE_ORIG=y
# CONFIG_BTDM_MODEM_SLEEP_MODE_EVED is not set
CONFIG_BTDM_LPCLK_SEL_MAIN_XTAL=y
CONFIG_BLE_SCAN_DUPLICATE=y
CONFIG_SCAN_DUPLICATE_BY_DEVICE_ADDR=y
# CONFIG_SCAN_DUPLICATE_BY_ADV_DATA is not set
# CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR is not set
CONFIG_SCAN_DUPLICATE_TYPE=0
CONFIG_DUPLICATE_SCAN_CACHE_SIZE=200
# CONFIG_BLE_MESH_SCAN_DUPLICATE_EN is not set
CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_NUM=100
CONFIG_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
CONFIG_BLUEDROID_ENABLED=y
CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
# CONFIG_BLUEDROID_PINNED_TO_CORE_1 is not set
CONFIG_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BTC_TASK_STACK_SIZE=3072
# CONFIG_BLUEDROID_MEM_DEBUG is not set
# CONFIG_CLASSIC_BT_ENABLED is not set
CONFIG_GATTS_ENABLE=y
# CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
CONFIG_GATTC_ENABLE=y
# CONFIG_GATTC_CACHE_NVS_FLASH is not set
CONFIG_BLE_SMP_ENABLE=y
# CONFIG_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
# CONFIG_BT_STACK_NO_LOG is not set
# CONFIG_HCI_TRACE_LEVEL_NONE is not set
# CONFIG_HCI_TRACE_LEVEL_ERROR is not set
CONFIG_HCI_TRACE_LEVEL_WARNING=y
# CONFIG_HCI_TRACE_LEVEL_API is not set
# CONFIG_HCI_TRACE_LEVEL_EVENT is not set
# CONFIG_HCI_TRACE_LEVEL_DEBUG is not set
# CONFIG_HCI_TRACE_LEVEL_VERBOSE is not set
CONFIG_HCI_INITIAL_TRACE_LEVEL=2
# CONFIG_BTM_TRACE_LEVEL_NONE is not set
# CONFIG_BTM_TRACE_LEVEL_ERROR is not set
CONFIG_BTM_TRACE_LEVEL_WARNING=y
# CONFIG_BTM_TRACE_LEVEL_API is not set
# CONFIG_BTM_TRACE_LEVEL_EVENT is not set
# CONFIG_BTM_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTM_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTM_INITIAL_TRACE_LEVEL=2
# CONFIG_L2CAP_TRACE_LEVEL_NONE is not set
# CONFIG_L2CAP_TRACE_LEVEL_ERROR is not set
CONFIG_L2CAP_TRACE_LEVEL_WARNING=y
# CONFIG_L2CAP_TRACE_LEVEL_API is not set
# CONFIG_L2CAP_TRACE_LEVEL_EVENT is not set
# CONFIG_L2CAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_L2CAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_L2CAP_INITIAL_TRACE_LEVEL=2
# CONFIG_RFCOMM_TRACE_LEVEL_NONE is not set
# CONFIG_RFCOMM_TRACE_LEVEL_ERROR is not set
CONFIG_RFCOMM_TRACE_LEVEL_WARNING=y
# CONFIG_RFCOMM_TRACE_LEVEL_API is not set
# CONFIG_RFCOMM_TRACE_LEVEL_EVENT is not set
# CONFIG_RFCOMM_TRACE_LEVEL_DEBUG is not set
# CONFIG_RFCOMM_TRACE_LEVEL_VERBOSE is not set
CONFIG_RFCOMM_INITIAL_TRACE_LEVEL=2
# CONFIG_SDP_TRACE_LEVEL_NONE is not set
# CONFIG_SDP_TRACE_LEVEL_ERROR is not set
CONFIG_SDP_TRACE_LEVEL_WARNING=y
# CONFIG_SDP_TRACE_LEVEL_API is not set
# CONFIG_SDP_TRACE_LEVEL_EVENT is not set
# CONFIG_SDP_TRACE_LEVEL_DEBUG is not set
# CONFIG_SDP_TRACE_LEVEL_VERBOSE is not set
CONFIG_SDP_INITIAL_TRACE_LEVEL=2
# CONFIG_GAP_TRACE_LEVEL_NONE is not set
# CONFIG_GAP_TRACE_LEVEL_ERROR is not set
CONFIG_GAP_TRACE_LEVEL_WARNING=y
# CONFIG_GAP_TRACE_LEVEL_API is not set
# CONFIG_GAP_TRACE_LEVEL_EVENT is not set
# CONFIG_GAP_TRACE_LEVEL_DEBUG is not set
# CONFIG_GAP_TRACE_LEVEL_VERBOSE is not set
CONFIG_GAP_INITIAL_TRACE_LEVEL=2
# CONFIG_BNEP_TRACE_LEVEL_NONE is not set
# CONFIG_BNEP_TRACE_LEVEL_ERROR is not set
CONFIG_BNEP_TRACE_LEVEL_WARNING=y
# CONFIG_BNEP_TRACE_LEVEL_API is not set
# CONFIG_BNEP_TRACE_LEVEL_EVENT is not set
# CONFIG_BNEP_TRACE_LEVEL_DEBUG is not set
# CONFIG_BNEP_TRACE_LEVEL_VERBOSE is not set
CONFIG_BNEP_INITIAL_TRACE_LEVEL=2
# CONFIG_PAN_TRACE_LEVEL_NONE is not set
# CONFIG_PAN_TRACE_LEVEL_ERROR is not set
CONFIG_PAN_TRACE_LEVEL_WARNING=y
# CONFIG_PAN_TRACE_LEVEL_API is not set
# CONFIG_PAN_TRACE_LEVEL_EVENT is not set
# CONFIG_PAN_TRACE_LEVEL_DEBUG is not set
# CONFIG_PAN_TRACE_LEVEL_VERBOSE is not set
CONFIG_PAN_INITIAL_TRACE_LEVEL=2
# CONFIG_A2D_TRACE_LEVEL_NONE is not set
# CONFIG_A2D_TRACE_LEVEL_ERROR is not set
CONFIG_A2D_TRACE_LEVEL_WARNING=y
# CONFIG_A2D_TRACE_LEVEL_API is not set
# CONFIG_A2D_TRACE_LEVEL_EVENT is not set
# CONFIG_A2D_TRACE_LEVEL_DEBUG is not set
# CONFIG_A2D_TRACE_LEVEL_VERBOSE is not set
CONFIG_A2D_INITIAL_TRACE_LEVEL=2
# CONFIG_AVDT_TRACE_LEVEL_NONE is not set
# CONFIG_AVDT_TRACE_LEVEL_ERROR is not set
CONFIG_AVDT_TRACE_LEVEL_WARNING=y
# CONFIG_AVDT_TRACE_LEVEL_API is not set
# CONFIG_AVDT_TRACE_LEVEL_EVENT is not set
# CONFIG_AVDT_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVDT_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVDT_INITIAL_TRACE_LEVEL=2
# CONFIG_AVCT_TRACE_LEVEL_NONE is not set
# CONFIG_AVCT_TRACE_LEVEL_ERROR is not set
CONFIG_AVCT_TRACE_LEVEL_WARNING=y
# CONFIG_AVCT_TRACE_LEVEL_API is not set
# CONFIG_AVCT_TRACE_LEVEL_EVENT is not set
# CONFIG_AVCT_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVCT_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVCT_INITIAL_TRACE_LEVEL=2
# CONFIG_AVRC_TRACE_LEVEL_NONE is not set
# CONFIG_AVRC_TRACE_LEVEL_ERROR is not set
CONFIG_AVRC_TRACE_LEVEL_WARNING=y
# CONFIG_AVRC_TRACE_LEVEL_API is not set
# CONFIG_AVRC_TRACE_LEVEL_EVENT is not set
# CONFIG_AVRC_TRACE_LEVEL_DEBUG is not set
# CONFIG_AVRC_TRACE_LEVEL_VERBOSE is not set
CONFIG_AVRC_INITIAL_TRACE_LEVEL=2
# CONFIG_MCA_TRACE_LEVEL_NONE is not set
# CONFIG_MCA_TRACE_LEVEL_ERROR is not set
CONFIG_MCA_TRACE_LEVEL_WARNING=y
# CONFIG_MCA_TRACE_LEVEL_API is not set
# CONFIG_MCA_TRACE_LEVEL_EVENT is not set
# CONFIG_MCA_TRACE_LEVEL_DEBUG is not set
# CONFIG_MCA_TRACE_LEVEL_VERBOSE is not set
CONFIG_MCA_INITIAL_TRACE_LEVEL=2
# CONFIG_HID_TRACE_LEVEL_NONE is not set
# CONFIG_HID_TRACE_LEVEL_ERROR is not set
CONFIG_HID_TRACE_LEVEL_WARNING=y
# CONFIG_HID_TRACE_LEVEL_API is not set
# CONFIG_HID_TRACE_LEVEL_EVENT is not set
# CONFIG_HID_TRACE_LEVEL_DEBUG is not set
# CONFIG_HID_TRACE_LEVEL_VERBOSE is not set
CONFIG_HID_INITIAL_TRACE_LEVEL=2
# CONFIG_APPL_TRACE_LEVEL_NONE is not set
# CONFIG_APPL_TRACE_LEVEL_ERROR is not set
CONFIG_APPL_TRACE_LEVEL_WARNING=y
# CONFIG_APPL_TRACE_LEVEL_API is not set
# CONFIG_APPL_TRACE_LEVEL_EVENT is not set
# CONFIG_APPL_TRACE_LEVEL_DEBUG is not set
# CONFIG_APPL_TRACE_LEVEL_VERBOSE is not set
CONFIG_APPL_INITIAL_TRACE_LEVEL=2
# CONFIG_GATT_TRACE_LEVEL_NONE is not set
# CONFIG_GATT_TRACE_LEVEL_ERROR is not set
CONFIG_GATT_TRACE_LEVEL_WARNING=y
# CONFIG_GATT_TRACE_LEVEL_API is not set
# CONFIG_GATT_TRACE_LEVEL_EVENT is not set
# CONFIG_GATT_TRACE_LEVEL_DEBUG is not set
# CONFIG_GATT_TRACE_LEVEL_VERBOSE is not set
CONFIG_GATT_INITIAL_TRACE_LEVEL=2
# CONFIG_SMP_TRACE_LEVEL_NONE is not set
# CONFIG_SMP_TRACE_LEVEL_ERROR is not set
CONFIG_SMP_TRACE_LEVEL_WARNING=y
# CONFIG_SMP_TRACE_LEVEL_API is not set
# CONFIG_SMP_TRACE_LEVEL_EVENT is not set
# CONFIG_SMP_TRACE_LEVEL_DEBUG is not set
# CONFIG_SMP_TRACE_LEVEL_VERBOSE is not set
CONFIG_SMP_INITIAL_TRACE_LEVEL=2
# CONFIG_BTIF_TRACE_LEVEL_NONE is not set
# CONFIG_BTIF_TRACE_LEVEL_ERROR is not set
CONFIG_BTIF_TRACE_LEVEL_WARNING=y
# CONFIG_BTIF_TRACE_LEVEL_API is not set
# CONFIG_BTIF_TRACE_LEVEL_EVENT is not set
# CONFIG_BTIF_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTIF_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTIF_INITIAL_TRACE_LEVEL=2
# CONFIG_BTC_TRACE_LEVEL_NONE is not set
# CONFIG_BTC_TRACE_LEVEL_ERROR is not set
CONFIG_BTC_TRACE_LEVEL_WARNING=y
# CONFIG_BTC_TRACE_LEVEL_API is not set
# CONFIG_BTC_TRACE_LEVEL_EVENT is not set
# CONFIG_BTC_TRACE_LEVEL_DEBUG is not set
# CONFIG_BTC_TRACE_LEVEL_VERBOSE is not set
CONFIG_BTC_INITIAL_TRACE_LEVEL=2
# CONFIG_OSI_TRACE_LEVEL_NONE is not set
# CONFIG_OSI_TRACE_LEVEL_ERROR is not set
CONFIG_OSI_TRACE_LEVEL_WARNING=y
# CONFIG_OSI_TRACE_LEVEL_API is not set
# CONFIG_OSI_TRACE_LEVEL_EVENT is not set
# CONFIG_OSI_TRACE_LEVEL_DEBUG is not set
# CONFIG_OSI_TRACE_LEVEL_VERBOSE is not set
CONFIG_OSI_INITIAL_TRACE_LEVEL=2
# CONFIG_BLUFI_TRACE_LEVEL_NONE is not set
# CONFIG_BLUFI_TRACE_LEVEL_ERROR is not set
CONFIG_BLUFI_TRACE_LEVEL_WARNING=y
# CONFIG_BLUFI_TRACE_LEVEL_API is not set
# CONFIG_BLUFI_TRACE_LEVEL_EVENT is not set
# CONFIG_BLUFI_TRACE_LEVEL_DEBUG is not set
# CONFIG_BLUFI_TRACE_LEVEL_VERBOSE is not set
CONFIG_BLUFI_INITIAL_TRACE_LEVEL=2
CONFIG_BT_ACL_CONNECTIONS=4
# CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST is not set
# CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY is not set
# CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK is not set
CONFIG_SMP_ENABLE=y
# CONFIG_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY is not set
CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
CONFIG_BT_RESERVE_DRAM=0xdb5c
# CONFIG_AWS_IOT_SDK is not set
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_HTTPD_LOG_PURGE_DATA is not set
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=2048
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
# CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT is not set
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
CONFIG_MB_TIMER_PORT_ENABLED=y
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0
CONFIG_LIBSODIUM_USE_MBEDTLS_SHA=y
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set

Compiling finish nicely.

and when I run the code I got:


Opening port
Port open
[0;32mI (191) esp_image: segment 1: paddr=0x0003d810 vaddr=0x3ffbdb60 size=0x02800 ( 10240) load[0m
[0;32mI (195) esp_image: segment 2: paddr=0x00040018 vaddr=0x400d0018 size=0x77190 (487824) map[0m
[0;32mI (369) esp_image: segment 3: paddr=0x000b71b0 vaddr=0x3ffc0360 size=0x00314 (   788) load[0m
[0;32mI (369) esp_image: segment 4: paddr=0x000b74cc vaddr=0x40080000 size=0x00400 (  1024) load[0m
[0;32mI (376) esp_image: segment 5: paddr=0x000b78d4 vaddr=0x40080400 size=0x11d6c ( 73068) load[0m
[0;32mI (425) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (426) boot: Disabling RNG early entropy source...[0m
[0;32mI (426) cpu_start: Pro cpu up.[0m
[0;32mI (430) cpu_start: Starting app cpu, entry point is 0x4008101c[0m
[0;32mI (0) cpu_start: App cpu up.[0m
[0;32mI (440) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (447) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM[0m
[0;32mI (453) heap_init: At 3FFB6388 len 00001C78 (7 KiB): DRAM[0m
[0;32mI (459) heap_init: At 3FFB9A20 len 00004108 (16 KiB): DRAM[0m
[0;32mI (465) heap_init: At 3FFBDB5C len 00000004 (0 KiB): DRAM[0m
[0;32mI (471) heap_init: At 3FFC8FD0 len 00017030 (92 KiB): DRAM[0m
[0;32mI (477) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM[0m
[0;32mI (484) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM[0m
[0;32mI (490) heap_init: At 4009216C len 0000DE94 (55 KiB): IRAM[0m
[0;32mI (496) cpu_start: Pro cpu start user code[0m
[0;32mI (516) cpu_start: Starting scheduler on PRO CPU.[0m
[0;32mI (0) cpu_start: Starting scheduler on APP CPU.[0m
�uart over ble start!
Create the BLE Device..
[E][BLEDevice.cpp:356] init(): esp_bt_controller_init: rc=259 Unknown ESP_ERR error
Create the BLE Server..

:-(

I realy dont know where to search now

manuprendlair commented 4 years ago

I try to build the esp-idf ble spp client example and it worked on my hardware. I add the arduino core as componenent and compile the esp-idf spp client. It worked I change the code to the arduino ble uart example and its failed with:

[E][BLEDevice.cpp:356] init(): esp_bt_controller_init: rc=259 Unknown ESP_ERR error ...

chegewara commented 4 years ago

Ok, i just tested code from your repository, with esp-idf v3.2 and it works, with 1 exception. I had to disable classic BT in menuconfig. Maybe, im not sure, there is some bug in library or just not enough memory to run both, ble and classic BT.

manuprendlair commented 4 years ago

@chegewara : I understand you havent any message on serial console about ble init? this right? How do you compile it? Directly from esp-idf command line tool chain ? Could you give me information about (version)? and about esp-idf sdk is it the last release of v3.2 or the one with git ID I mentioned ?

chegewara commented 4 years ago

With classic BT enabled in menuconfig BLE just didnt start, but when i disabled it then all works, my android phone can see it. This is esp-idf version i used (most recent as of today):

commit 90af68bd3c1941d9f5513bee22a12de7250208d7
Merge: 093214c 0afad4c
Author: Jiang Jiang Jian <jack@espressif.com>
Date:   Mon Oct 14 21:46:22 2019 +0800

    Merge branch 'bugfix/alt_exit_idf_monitor_v3.2' into 'release/v3.2'

    idf_monitor: Exit with CTRL+X in menu (v3.2)

    See merge request espressif/esp-idf!6292

I am using VS code and since your code is not platformio ready, i had to use command line make.

manuprendlair commented 4 years ago

ok, I will test this.

Le lun. 4 nov. 2019 à 06:57, chegewara notifications@github.com a écrit :

With classic BT enabled in menuconfig BLE just didnt start, but when i disabled it then all works, my android phone can see it. This is esp-idf version i used (most recent as of today):

commit 90af68bd3c1941d9f5513bee22a12de7250208d7 Merge: 093214c 0afad4c Author: Jiang Jiang Jian jack@espressif.com Date: Mon Oct 14 21:46:22 2019 +0800
Merge branch 'bugfix/alt_exit_idf_monitor_v3.2' into 'release/v3.2'

idf_monitor: Exit with CTRL+X in menu (v3.2)

See merge request espressif/esp-idf!6292
I am using VS code and since your code is not platformio ready, i had to use command line make.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/espressif/arduino-esp32/issues/3436?email_source=notifications&email_token=ACTRBWZTRZ3WNFDSVU7Q4ZDQR62T7A5CNFSM4JHBAN72YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC6JWXY#issuecomment-549231455, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACTRBW55BGNX2D2MYJNDVMDQR62T7ANCNFSM4JHBAN7Q .

manuprendlair commented 4 years ago

Thanks for your return chegewara !

Le lun. 4 nov. 2019 à 06:57, chegewara notifications@github.com a écrit :

With classic BT enabled in menuconfig BLE just didnt start, but when i disabled it then all works, my android phone can see it. This is esp-idf version i used (most recent as of today):

commit 90af68bd3c1941d9f5513bee22a12de7250208d7 Merge: 093214c 0afad4c Author: Jiang Jiang Jian jack@espressif.com Date: Mon Oct 14 21:46:22 2019 +0800
Merge branch 'bugfix/alt_exit_idf_monitor_v3.2' into 'release/v3.2'

idf_monitor: Exit with CTRL+X in menu (v3.2)

See merge request espressif/esp-idf!6292
I am using VS code and since your code is not platformio ready, i had to use command line make.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/espressif/arduino-esp32/issues/3436?email_source=notifications&email_token=ACTRBWZTRZ3WNFDSVU7Q4ZDQR62T7A5CNFSM4JHBAN72YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEC6JWXY#issuecomment-549231455, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACTRBW55BGNX2D2MYJNDVMDQR62T7ANCNFSM4JHBAN7Q .

manuprendlair commented 4 years ago

@chegewara : Bluetooth classic option is disable and its not work.. Do you use my sdkconfig file without option BT classsic or do you rebuild one? (could you send me the sdkconfig who work?)

I will try to compile the code with your sdk configuration.

Reagards

manuprendlair commented 4 years ago

So, I use the esp-idf installer under windows, I install the esp-idf 3.2 release branch and launch manualy a build when I run IDF monitor, I got:


ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:6608
ho 0 tail 12 room 4
load:0x40078000,len:10752
load:0x40080400,len:6664
entry 0x40080778
I (72) boot: Chip Revision: 1
I (73) boot_comm: mismatch chip revision, expect 1, found 0
I (40) boot: ESP-IDF v3.2.2-176-g90af68bd3 2nd stage bootloader
I (40) boot: compile time 21:25:22
I (40) boot: Enabling RNG early entropy source...
I (46) boot: SPI Speed      : 40MHz
I (50) boot: SPI Mode       : DIO
I (54) boot: SPI Flash Size : 4MB
I (58) boot: Partition Table:
I (62) boot: ## Label            Usage          Type ST Offset   Length
I (69) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (76) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (84) boot:  2 factory          factory app      00 00 00010000 00100000
I (91) boot: End of partition table
I (95) boot_comm: mismatch chip revision, expect 1, found 0
I (102) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x2d4a8 (185512) map
I (176) esp_image: segment 1: paddr=0x0003d4d0 vaddr=0x3ffbdb60 size=0x02b04 ( 11012) load
I (180) esp_image: segment 2: paddr=0x0003ffdc vaddr=0x40080000 size=0x00034 (    52) load
0x40080000: _WindowOverflow4 at C:/Users/ManuF/Desktop/esp-idf/components/freertos/xtensa_vectors.S:1779

I (183) esp_image: segment 3: paddr=0x00040018 vaddr=0x400d0018 size=0x7719c (487836) map
0x400d0018: _flash_cache_start at ??:?

I (363) esp_image: segment 4: paddr=0x000b71bc vaddr=0x40080034 size=0x003cc (   972) load
0x40080034: _WindowOverflow4 at C:/Users/ManuF/Desktop/esp-idf/components/freertos/xtensa_vectors.S:1783

I (363) esp_image: segment 5: paddr=0x000b7590 vaddr=0x40080400 size=0x11dc4 ( 73156) load
I (410) boot: Loaded app from partition at offset 0x10000
I (410) boot: Disabling RNG early entropy source...
I (411) cpu_start: Pro cpu up.
I (414) cpu_start: Starting app cpu, entry point is 0x4008101c
0x4008101c: call_start_cpu1 at C:/Users/ManuF/Desktop/esp-idf/components/esp32/cpu_start.c:250

I (0) cpu_start: App cpu up.
I (425) heap_init: Initializing. RAM available for dynamic allocation:
I (432) heap_init: At 3FFAFF10 len 000000F0 (0 KiB): DRAM
I (438) heap_init: At 3FFB6388 len 00001C78 (7 KiB): DRAM
I (444) heap_init: At 3FFB9A20 len 00004108 (16 KiB): DRAM
I (450) heap_init: At 3FFBDB5C len 00000004 (0 KiB): DRAM
I (456) heap_init: At 3FFC8FC8 len 00017038 (92 KiB): DRAM
I (462) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (469) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (475) heap_init: At 400921C4 len 0000DE3C (55 KiB): IRAM
I (481) cpu_start: Pro cpu start user code
I (500) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
uart over ble start!
Create the BLE Device..
[E][BLEDevice.cpp:356] init(): esp_bt_controller_init: rc=259 Unknown ESP_ERR error
Create the BLE Server..

So it's also not working. I am no able to analyze the monitor log. If somebody could help. Thanks

manuprendlair commented 4 years ago

@chegewara : Could you share with me your working project ? (with arduino component)

chegewara commented 4 years ago

I will, when i find few spare minutes.

manuprendlair commented 4 years ago

Thanks for your support Chegewara!

Le jeu. 7 nov. 2019 à 01:55, chegewara notifications@github.com a écrit :

I will, when i find few spare minutes.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/espressif/arduino-esp32/issues/3436?email_source=notifications&email_token=ACTRBWZFCF6GJFCCRUNZMQ3QSNRRFA5CNFSM4JHBAN72YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDIQRKQ#issuecomment-550570154, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACTRBW655VWMWVMDNQ2I67DQSNRRFANCNFSM4JHBAN7Q .

chegewara commented 4 years ago

Ok, this time i had some troubles before i make it to work. Looks like last time i did it automatically:

Bluetooth controller  --->Bluetooth controller mode (BR/EDR/BLE/DUALMODE) (BLE Only)  ---> BLE Only

And remember to disable Classic BT too.

manuprendlair commented 4 years ago

@chegevara: Hum I did evry things, just not find why it failed evry time for me. Did you able to run it again ?

chegewara commented 4 years ago

Yes, this is what i did. Pull cod from your repository and tested few options in menuconfig until i was able to make it work, then i reverted BT classic options to make sure all is needed. sdkconfig.txt

manuprendlair commented 4 years ago

In my repository there are no ESP32 Arduino core. Did you use the last available in Espressif repository?

chegewara commented 4 years ago

Yes, most recent arduino cloned.

manuprendlair commented 4 years ago

so, I install the esp-idf 3.2 release with esp-idf-tools-setup-2.1. I download the code from my repository. I put your sdkconfig run an esp-idf command prompt, then idf.py build It compile just right, But when I ran the code.. always the same error.. [E][BLEDevice.cpp:356] init(): esp_bt_controller_init: rc=259 Unknown ESP_ERR error I test the code on another hardware, same problem

I think I will give up ..:-( 'cause I dont know where to search

Last things, @chegewara could you try to run my bin on your hardware ? ble_uart.zip

chegewara commented 4 years ago

https://github.com/chegewara/ESP_IDF_ARDUINO_BLE_TEST

manuprendlair commented 4 years ago

@chegewara Did you have time to try my bin? I took you ESP_IDF_ARDUINO_BLE_TEST fork and add the asp 32 arduino core that I found in your repository. then compile from esp-idf tools

first the compile fail falling to this problem : https://github.com/espressif/arduino-esp32/issues/3209 -> so I kept the up to date BLEDevice.cpp
secondly I got a missing main function, when I ran menuconfig I saw that the option for use setup and loop function. so I correct it. compile finish ok. But when I ran it I got the same error:

[E][BLEDevice.cpp:356] init(): esp_bt_controller_init: rc=259 Unknown ESP_ERR error

...

chegewara commented 4 years ago

In that case i really dont know what to say if code from my repository works on my device but you still getting error.

/**
 * @brief Initialize the %BLE environment.
 * @param deviceName The device name of the device.
 */
/* STATIC */ void BLEDevice::init(std::string deviceName) {
    if(!initialized){
        initialized = true; // Set the initialization flag to ensure we are only initialized once.

        esp_err_t errRc = ESP_OK;
#ifdef ARDUINO_ARCH_ESP32
        if (!btStart()) {
            errRc = ESP_FAIL;
            return;
        }
#else
        errRc = ::nvs_flash_init();
        if (errRc != ESP_OK) {
            log_e("nvs_flash_init: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        }

#ifndef CLASSIC_BT_ENABLED
        esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT);  
#endif
        esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
        errRc = esp_bt_controller_init(&bt_cfg);
        if (errRc != ESP_OK) {
            log_e("esp_bt_controller_init: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        }

#ifndef CLASSIC_BT_ENABLED
        errRc = esp_bt_controller_enable(ESP_BT_MODE_BLE);
        if (errRc != ESP_OK) {
            log_e("esp_bt_controller_enable: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        }
#else
        errRc = esp_bt_controller_enable(ESP_BT_MODE_BTDM);
        if (errRc != ESP_OK) {
            log_e("esp_bt_controller_enable: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        }
#endif
#endif

        esp_bluedroid_status_t bt_state = esp_bluedroid_get_status();
        if (bt_state == ESP_BLUEDROID_STATUS_UNINITIALIZED) {
            errRc = esp_bluedroid_init();
            if (errRc != ESP_OK) {
                log_e("esp_bluedroid_init: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
                return;
            }
        }

        if (bt_state != ESP_BLUEDROID_STATUS_ENABLED) {
            errRc = esp_bluedroid_enable();
            if (errRc != ESP_OK) {
                log_e("esp_bluedroid_enable: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
                return;
            }
        }

        errRc = esp_ble_gap_register_callback(BLEDevice::gapEventHandler);
        if (errRc != ESP_OK) {
            log_e("esp_ble_gap_register_callback: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        }

#ifdef CONFIG_GATTC_ENABLE   // Check that BLE client is configured in make menuconfig
        errRc = esp_ble_gattc_register_callback(BLEDevice::gattClientEventHandler);
        if (errRc != ESP_OK) {
            log_e("esp_ble_gattc_register_callback: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        }
#endif   // CONFIG_GATTC_ENABLE

#ifdef CONFIG_GATTS_ENABLE  // Check that BLE server is configured in make menuconfig
        errRc = esp_ble_gatts_register_callback(BLEDevice::gattServerEventHandler);
        if (errRc != ESP_OK) {
            log_e("esp_ble_gatts_register_callback: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        }
#endif   // CONFIG_GATTS_ENABLE

        errRc = ::esp_ble_gap_set_device_name(deviceName.c_str());
        if (errRc != ESP_OK) {
            log_e("esp_ble_gap_set_device_name: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        };

#ifdef CONFIG_BLE_SMP_ENABLE   // Check that BLE SMP (security) is configured in make menuconfig
        esp_ble_io_cap_t iocap = ESP_IO_CAP_NONE;
        errRc = ::esp_ble_gap_set_security_param(ESP_BLE_SM_IOCAP_MODE, &iocap, sizeof(uint8_t));
        if (errRc != ESP_OK) {
            log_e("esp_ble_gap_set_security_param: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
            return;
        };
#endif // CONFIG_BLE_SMP_ENABLE
    }
    vTaskDelay(200 / portTICK_PERIOD_MS); // Delay for 200 msecs as a workaround to an apparent Arduino environment issue.
} // init

manuprendlair commented 4 years ago

@chegewara This code is a full native esp-idf function to run ble right ? Do you check my repository with this code or with the arduino code in ble_uart.cpp ?

chegewara commented 4 years ago

Yes, my repository i pasted link above is fork of your repository, just changed sdkconfig with make menuconfig.

Also I posted here BLEDevice::init() function (code above) just in case i have in my environment somehow changed library (just dont remember) so you could compare with library you have.

manuprendlair commented 4 years ago

ok, I will test all that. Thanks a lot!

manuprendlair commented 4 years ago

Any news ??

chegewara commented 4 years ago

I dont know, any news? Last post is this:

ok, I will test all that. Thanks a lot!

I cant help more, because i cant reproduce your problem.

manuprendlair commented 4 years ago

Ohhh sorry, I forgot a comment... where is my head ?? ;-) So not any suggestion work! I am at the same point. even with visualGDB or native Espressif tools, compilation was ok but fail with the same message at startup! So for now I continue my project with wifi, but eat much power than bluetooth (I think...because not able to test as now)

stale[bot] commented 4 years ago

[STALE_SET] This issue has been automatically marked as stale because it has not had recent activity. It will be closed in 14 days if no further activity occurs. Thank you for your contributions.

stale[bot] commented 4 years ago

[STALE_DEL] This stale issue has been automatically closed. Thank you for your contributions.

stale[bot] commented 4 years ago

[STALE_DEL] This stale issue has been automatically closed. Thank you for your contributions.

GuyMinibrew commented 4 years ago

I had the same issue, took me a long time to figure it out, it's a missing "#define ARDUINO_ARCH_ESP32", which has something to do with "-DARDUINO_ARCH_ESP32" not configured correctly.

miqmago commented 3 years ago

Seems the problem is in the esp32-hal-misc.c. It releases all bluetooth memory because btInUse() returns false. It says this function is overriden in esp32-hal-bt.c but the fact is that it's calling the one defined in esp32-hal-misc.c:

#ifdef CONFIG_BT_ENABLED
//overwritten in esp32-hal-bt.c
bool btInUse() __attribute__((weak));
bool btInUse(){ return false; }
#endif

void initArduino()
{
#ifdef CONFIG_APP_ROLLBACK_ENABLE
    const esp_partition_t *running = esp_ota_get_running_partition();
    esp_ota_img_states_t ota_state;
    if (esp_ota_get_state_partition(running, &ota_state) == ESP_OK) {
        if (ota_state == ESP_OTA_IMG_PENDING_VERIFY) {
            if (verifyOta()) {
                esp_ota_mark_app_valid_cancel_rollback();
            } else {
                log_e("OTA verification failed! Start rollback to the previous version ...");
                esp_ota_mark_app_invalid_rollback_and_reboot();
            }
        }
    }
#endif
    //init proper ref tick value for PLL (uncomment if REF_TICK is different than 1MHz)
    //ESP_REG(APB_CTRL_PLL_TICK_CONF_REG) = APB_CLK_FREQ / REF_CLK_FREQ - 1;
#ifdef F_CPU
    setCpuFrequencyMhz(F_CPU/1000000);
#endif
#if CONFIG_SPIRAM_SUPPORT
    psramInit();
#endif
    esp_log_level_set("*", CONFIG_LOG_DEFAULT_LEVEL);
    esp_err_t err = nvs_flash_init();
    if(err == ESP_ERR_NVS_NO_FREE_PAGES){
        const esp_partition_t* partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_NVS, NULL);
        if (partition != NULL) {
            err = esp_partition_erase_range(partition, 0, partition->size);
            if(!err){
                err = nvs_flash_init();
            } else {
                log_e("Failed to format the broken NVS partition!");
            }
        }
    }
    if(err) {
        log_e("Failed to initialize NVS! Error: %u", err);
    }
#ifdef CONFIG_BT_ENABLED
    if(!btInUse()){
        esp_bt_controller_mem_release(ESP_BT_MODE_BTDM);
    }
#endif
    init();
    initVariant();
}

I've tried to define my own btInUse() function, but it seems not possible to override it, even from src/main.cpp.

The only solution I've found up to now is to call a function from esp32-hal-bt.c. Right now I've selected btStarted() which seems very innocent and then it seems the esp32-hal-bt.c is linked and the btInUse() is overriden, so it makes to not release all bluetooth and it makes the magic to happen.

chegewara commented 3 years ago

Seems the problem is in the esp32-hal-misc.c. It releases all bluetooth memory because btInUse() returns false. It says this function is overriden in esp32-hal-bt.c but the fact is that it's calling the one defined in esp32-hal-misc.c

if that would be true, then bluetooth would not work to anyone ever.

Maybe it is required to init BT in setup, so make use that BT from esp32-bt-hal.c, just like you said, but for sure there is some magic.

miqmago commented 3 years ago

For sure this is quite strange. I'm using platformIO:

[platformio]
default_envs = esp32dev

[env]
platform = espressif32
framework = 
    arduino
    espidf
monitor_speed = 115200
platform_packages = framework-arduinoespressif32 @ https://github.com/marcovannoord/arduino-esp32.git#idf-release/v4.0
board_build.partitions = partitions/partitions_singleapp_large.csv
build_flags = 
    -DCORE_DEBUG_LEVEL=4
    -DESP32=1
lib_deps = 
    me-no-dev/ESP Async WebServer@^1.2.3
    me-no-dev/ESPAsyncTCP@^1.2.2

[env:esp32dev]
board = esp32dev

I've digged inside code and haven't seen a rational explanation. Even I've tried to change the order in CMakeLists.txt of the repo. What I'm sure is that if I don't call a function from esp32-bt-hal.c, the btInUse() definition comes from esp32-hal-misc.c, I've placed logs everywhere to see which function is being called and traced to see if there was another call to esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) but the only one comes from initArduino().

Perhaps it might be due to compiler options, or even because of __attribute__((weak)) processement.

artoowang commented 1 year ago

Right now I've selected btStarted() which seems very innocent and then it seems the esp32-hal-bt.c is linked and the btInUse() is overriden, so it makes to not release all bluetooth and it makes the magic to happen.

Thank you, sir! I was completely puzzled by the init error, but what you suggested resolved the issue like magic.

parksj10 commented 1 year ago

I can confirm this is still an issue in 4.4.5, thanks @miqmago for the solution!

espressif / arduino-esp32

esp_bt_controller_init error 259 on esp-idf project with arduino as component #3436