why cannt run "bsp_sdcard_mount() in the demo of "esp-dev-kits/tree/master/esp32-p4-function-ev-board/examples/esp_ui_demo" (AEGHB-785)

liujkek22 commented 3 months ago

Answers checklist.

[X] I have read the documentation ESP-IDF Programming Guide and the issue is not addressed there.
[X] I have updated my IDF branch (master or release) to the latest version and checked that the issue is present there.
[X] I have searched the issue tracker for a similar issue and not found a similar issue.

IDF version.

5.3

Espressif SoC revision.

ESP32P4

Operating System used.

Windows

How did you build your project?

VS Code IDE

If you are using Windows, please specify command line type.

CMD

Development Kit.

ESP32P4-function-ev-board

Steps to reproduce.

build the project and run well，project:"esp-dev-kits/tree/master/esp32-p4-function-ev-board/examples/esp_ui_demo"
change the code with the fats file system with sdcard;
remove all code in main function only leave"bsp_sdcard_mount()",
build an run;
always error :E (1226) vfs_fat_sdmmc: host init failed (0x103）

...

Build Logs.

No response

More Information.

I (1201) transport: Add ESP-Hosted channel IF[1]: S[0] Tx[0x480094e6] Rx[0x48014dfc] 0x480094e6: transport_drv_sta_tx at D:/examples/esp_ui_demo/managed_components/espressif__esp_hosted/host/drivers/transport/transport_drv.c:211 0x48014dfc: esp_wifi_remote_channel_rx at D:/examples/esp_ui_demo/managed_components/espressif__esp_wifi_remote/esp_wifi_remote_net.c:19

I (1209) transport: Add ESP-Hosted channel IF[2]: S[0] Tx[0x4800942c] Rx[0x48014dfc] 0x4800942c: transport_drv_ap_tx at D:/examples/esp_ui_demo/managed_components/espressif__esp_hosted/host/drivers/transport/transport_drv.c:241 0x48014dfc: esp_wifi_remote_channel_rx at D:/examples/esp_ui_demo/managed_components/espressif__esp_wifi_remote/esp_wifi_remote_net.c:19

I (1218) main_task: Started on CPU0 I (1222) main_task: Calling app_main() E (1226) vfs_fat_sdmmc: host init failed (0x103). ESP_ERROR_CHECK failed: esp_err_t 0x103 (ESP_ERR_INVALID_STATE) at 0x48014ece 0x48014ece: app_main at D:/examples/esp_ui_demo/main/main.cpp:33 (discriminator 1)

file: "./main/main.cpp" line 33 func: void app_main() expression: bsp_sdcard_mount()

abort() was called at PC 0x4ff07da9 on core 0 0x4ff07da9: _esp_error_check_failed at D:/ESP53/v5.3/esp-idf/components/esp_system/esp_err.c:49

Core 0 register dump: MEPC : 0x4ff00c3c RA : 0x4ff07db4 SP : 0x4ff21070 GP : 0x4ff11000 0x4ff00c3c: panic_abort at D:/ESP53/v5.3/esp-idf/components/esp_system/panic.c:463 0x4ff07db4: flash_read at D:/ESP53/v5.3/esp-idf/components/esp_system/port/image_process.c:77

TP : 0x4ff21150 T0 : 0x37363534 T1 : 0x7271706f T2 : 0x33323130 S0/FP : 0x4ff210ac S1 : 0x4ff210ac A0 : 0x4ff210ac A1 : 0x4ff2108e A2 : 0x00000000 A3 : 0x4ff210d9 A4 : 0x00000001 A5 : 0x4ff15000 A6 : 0x00000000 A7 : 0x76757473 S2 : 0x4ff21090 S3 : 0x00000000 S4 : 0x00000000 S5 : 0x00000000 S6 : 0x00000000 S7 : 0x00000000 S8 : 0x00000000 S9 : 0x00000000 S10 : 0x00000000 S11 : 0x00000000 T3 : 0x6e6d6c6b T4 : 0x6a696867 T5 : 0x66656463 T6 : 0x62613938 MSTATUS : 0x00011880 MTVEC : 0x4ff00003 MCAUSE : 0x00000007 MTVAL : 0x00000000 0x4ff00003: _vector_table at ??:?

MHARTID : 0x00000000

Stack memory: 4ff21070: 0x00000000 0x00000000 0x4ff210ac 0x4ff0f62e 0x00000000 0x00000000 0x00000000 0x00000030 0x4ff0f62e: __assert_func at D:/ESP53/v5.3/esp-idf/components/newlib/assert.c:33

4ff21090: 0x30666634 0x39616437 0x48043000 0x4ff1251c 0x4ff21090 0x4ff12538 0x4ff2108c 0x726f6261 4ff210b0: 0x20292874 0x20736177 0x6c6c6163 0x61206465 0x43502074 0x34783020 0x37306666 0x20396164 4ff210d0: 0x63206e6f 0x2065726f 0x00000030 0x48040000 0x00000000 0x48037000 0x48043000 0x4ff07dac 0x48037000: esp_startup_start_app at D:/ESP53/v5.3/esp-idf/components/freertos/app_startup.c:86 (discriminator 1) 0x4ff07dac: esp_system_abort at D:/ESP53/v5.3/esp-idf/components/esp_system/port/esp_system_chip.c:91

4ff210f0: 0x00000000 0x48037000 0x48043000 0x48014ed2 0x480434e8 0x000004c2 0x00000000 0x48036f4e 0x48037000: esp_startup_start_app at D:/ESP53/v5.3/esp-idf/components/freertos/app_startup.c:86 (discriminator 1) 0x48014ed2: bsp_sdcard_mount at D:/examples/esp_ui_demo/managed_components/espressif__esp32_p4_function_ev_board/esp32_p4_function_ev_board.c:75 0x48036f4e: main_task at D:/ESP53/v5.3/esp-idf/components/freertos/app_startup.c:209 (discriminator 13)

4ff21110: 0x00000000 0x00001388 0x00000003 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 4ff21130: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21150: 0x00000000 0x4ff20180 0x4ff20180 0x00000000 0x00000000 0x00000000 0xa5a5a5a5 0xa5a5a5a5 4ff21170: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0x00000160 0x4ff20f50 0x00000000 0x4ff13614 4ff21190: 0x4ff13614 0x4ff21184 0x4ff1360c 0x00000018 0x00000000 0x00000000 0x4ff21184 0x00000000 4ff211b0: 0x00000001 0x4ff20180 0x6e69616d 0x00000000 0x00000000 0x00000000 0x00000000 0x4ff21170 4ff211d0: 0x00000009 0x00000000 0x00000001 0x00000000 0x00000000 0x00000000 0x00004bdb 0x00000000 4ff211f0: 0x4ff154fc 0x4ff15564 0x4ff155cc 0x00000000 0x00000000 0x00000001 0x00000000 0x00000000 4ff21210: 0x00000000 0x48005528 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x48005528: esp_cleanup_r at D:/ESP53/v5.3/esp-idf/components/newlib/newlib_init.c:43

4ff21230: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 4ff21250: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 4ff21270: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 4ff21290: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 4ff212b0: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 4ff212d0: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000600 0xa5a5a5a5 0xa5a5a5a5 4ff212f0: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21310: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21330: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21350: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21370: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21390: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff213b0: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff213d0: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff213f0: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21410: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21430: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 4ff21450: 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5 0xa5a5a5a5

ELF file SHA256: d2f53a113

CPU halted. ESP-ROM:esp32p4-eco1-20240205 Build:Feb 5 2024 rst:0x7 (HP_SYS_HP_WDT_RESET),boot:0x30f (SPI_FAST_FLASH_BOOT) Core0 Saved PC:0x48001056 0x48001056: esp_panic_handler at D:/ESP53/v5.3/esp-idf/components/esp_system/panic.c:444

Core1 Saved PC:0x4ff03f16 0x4ff03f16: esp_cpu_wait_for_intr at D:/ESP53/v5.3/esp-idf/components/esp_hw_support/cpu.c:57 (discriminator 1)

SoftwareOli commented 3 months ago

I have tested the SD_card_example and it works on my ESP32 P4 development board. However, I had to adjust the pins in the menuconfig. My settings are: (44) MOSI GPIO number (39) MISO GPIO number (43) CLK GPIO number (42) CS GPIO number

Maybe it will help you with your project.

liujkek22 commented 3 months ago

I have tested the SD_card_example and it works on my ESP32 P4 development board. However, I had to adjust the pins in the menuconfig. My settings are: (44) MOSI GPIO number (39) MISO GPIO number (43) CLK GPIO number (42) CS GPIO number

Maybe it will help you with your project.

Thank you for your help. I'm using the bsp_sdcard_mount() API from the managed components. Normally, this API works without any issues, but in this particular demo, it’s causing the error I mentioned earlier. Since the API is official and has been well-tested, I’m puzzled as to why it’s not working in this case. Could you provide some insight into this?

chegewara commented 3 months ago

Normally yes, but i believe that all examples for P4 may have incorrectly assigned pins for peripherals. I am strongly suggesting to check always with schematics. The same situation is with some example (dont remember which one) and ethernet.

liujkek22 commented 3 months ago

Thank you for your suggestion. I followed your advice and checked the assigned pins. Interestingly, I conducted a test in another project, such as "lvgl_demo_v8/v9." In that test, I performed the following steps:

Called bsp_sdcard_mount();
Tested opening and reading a file

Everything worked fine. However, in the ESP_UI_DEMO project, the same steps don't seem to work as expected. This is quite puzzling.

If the bsp_sdcard_mount(); API were faulty, it wouldn't work in the other project either, so the issue might be related to some setting or an API conflict within the ESP_UI_DEMO project.

st3m0r commented 2 months ago

same problem, if you are using the wifi than mmc doesn't work, only sd_spi

Horion0415 commented 1 month ago

Currently, the SD card initialization method conflicts with esp_hosted, but this issue has been resolved and is being merged into ESP-BSP. If you need to test it urgently, you can use the PR (https://github.com/espressif/esp-bsp/pull/401).

espressif / esp-dev-kits