coredump corrupted on 5.1.4+ (IDFGH-14108)

Tarik2142 commented 1 day ago

Answers checklist.

[X] I have read the documentation ESP-IDF Programming Guide and the issue is not addressed there.
[X] I have updated my IDF branch (master or release) to the latest version and checked that the issue is present there.
[X] I have searched the issue tracker for a similar issue and not found a similar issue.

IDF version.

5.1.4 , 5.3.1

Espressif SoC revision.

ESP32-D0WD-V3 (revision v3.0)

Operating System used.

Windows

How did you build your project?

VS Code IDE

If you are using Windows, please specify command line type.

None

Development Kit.

custom board

Power Supply used.

USB

What is the expected behavior?

Successful coredump decoding

What is the actual behavior?

Failed to load core dump: Invalid core dump CRC 5fd7ffd, should be ffffffff

Steps to reproduce.

#include <Arduino.h>

void setup() {
    delay(10000);
    assert(0);
}

void loop() {
    delay(1000);
}

Debug Logs.

// First reboot - OK
ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x13 (S0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4604
ho 0 tail 12 room 4
load:0x40078000,len:15468
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3180
entry 0x400805b8

assert failed: void setup() main.cpp:5 (0)

Backtrace: 0x40082eb1:0x3ffb20e0 0x400876b9:0x3ffb2100 0x4008c35a:0x3ffb2120 0x400d1627:0x3ffb2250 0x400d17ee:0x3ffb2270 0x400896a1:0x3ffb2290
  #0  0x40082eb1 in panic_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/panic.c:466
  #1  0x400876b9 in esp_system_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/port/esp_system_chip.c:84
  #2  0x4008c35a in __assert_func at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/newlib/assert.c:81
  #3  0x400d1627 in setup() at src/main.cpp:5
  #4  0x400d17ee in loopTask(void*) at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:59
  #5  0x400896a1 in vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162

ELF file SHA256: 5520ccd13053a328

Guru Meditation Error: Core  1 panic'ed (Unhandled debug exception). 
Debug exception reason: BREAK instr
Core  1 register dump:
PC      : 0x400837c0  PS      : 0x00000016  A0      : 0x40080306  A1      : 0x3ffc2630
A2      : 0x00000000  A3      : 0x70000005  A4      : 0x00000000  A5      : 0x00000000
A6      : 0x00000000  A7      : 0x00000000  A8      : 0x00000800  A9      : 0x3ffb1f20
A10     : 0x00000000  A11     : 0x1163e1ea  A12     : 0x1163e1ea  A13     : 0x00060b24
A14     : 0xfffbfff0  A15     : 0x00000046  SAR     : 0x00000000  EXCCAUSE: 0x00000001
EXCVADDR: 0x00000000  LBEG    : 0x40085b88  LEND    : 0x40085b9e  LCOUNT  : 0xffffffff

Backtrace: 0x400837bd:0x3ffc2630 0x40080303:0x3ffc2660 0x65a5a5a2:0xa5a5a5a5 |<-CORRUPTED

ELF file SHA256: 5520ccd13053a328

Re-entered core dump! Exception happened during core dump!
Rebooting...

// All of the following reboots coredump are broken!
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4604
ho 0 tail 12 room 4
load:0x40078000,len:15468
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3180
entry 0x400805b8
E (169) esp_core_dump_flash: ����e dump data check failed:
Calculated checksum='a1ca788b'
Image checksum='ffffffff'

assert failed: void setup() main.cpp:5 (0)

Backtrace: 0x40082eb1:0x3ffb20e0 0x400876b9:0x3ffb2100 0x4008c35a:0x3ffb2120 0x400d1627:0x3ffb2250 0x400d17ee:0x3ffb2270 0x400896a1:0x3ffb2290
  #0  0x40082eb1 in panic_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/panic.c:466
  #1  0x400876b9 in esp_system_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/port/esp_system_chip.c:84
  #2  0x4008c35a in __assert_func at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/newlib/assert.c:81
  #3  0x400d1627 in setup() at src/main.cpp:5
  #4  0x400d17ee in loopTask(void*) at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:59
  #5  0x400896a1 in vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162

ELF file SHA256: 5520ccd13053a328

Guru Meditation Error: Core  1 panic'ed (Unhandled debug exception). 
Debug exception reason: BREAK instr
Core  1 register dump:
PC      : 0x400837c0  PS      : 0x00000016  A0      : 0x40080306  A1      : 0x3ffc2630
A2      : 0x00000000  A3      : 0x70000005  A4      : 0x00000000  A5      : 0x00000000
A6      : 0x00000000  A7      : 0x00000000  A8      : 0x00000800  A9      : 0x3ffb1f20
A10     : 0x00000000  A11     : 0x81c99f9d  A12     : 0x81c99f9d  A13     : 0x00060b24
A14     : 0xfffbfff0  A15     : 0x00000046  SAR     : 0x00000000  EXCCAUSE: 0x00000001
EXCVADDR: 0x00000000  LBEG    : 0x40085b88  LEND    : 0x40085b9e  LCOUNT  : 0xffffffff

Backtrace: 0x400837bd:0x3ffc2630 0x40080303:0x3ffc2660 0x65a5a5a2:0xa5a5a5a5 |<-CORRUPTED

ELF file SHA256: 5520ccd13053a328

Re-entered core dump! Exception happened during core dump!
Rebooting...

// broken
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4604
ho 0 tail 12 room 4
load:0x40078000,len:15468
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3180
entry 0x400805b8
E (169) esp_core_dump_flash: ����e dump data check failed:
Calculated checksum='a1ca788b'
Image checksum='ffffffff'

More Information.

I am using the Arduino framework based on IDF 5.1.4. I also tried Arduino core 3.1.0 rc3 based on IDF 5.3.1 and have the same problem. I completely wiped the chip and flashed it from scratch. I didn't get this problem on core 2.x (IDF v4.4.3)

I get: E (169) esp_core_dump_flash: ��e dump data check failed: Calculated checksum='a1ca788b' Image checksum='ffffffff' after the first assert(0) and coredump doesn't work anymore. Also, the device does not always reboot after a crash, it can remain in halt mode forever.

Tarik2142 commented 1 day ago

#
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) 5.1.4 Project Configuration
#
CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined"
CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined"
CONFIG_SOC_DPORT_WORKAROUND="Not determined"
CONFIG_SOC_CAPS_ECO_VER_MAX=301
CONFIG_SOC_ADC_SUPPORTED=y
CONFIG_SOC_DAC_SUPPORTED=y
CONFIG_SOC_UART_SUPPORTED=y
CONFIG_SOC_MCPWM_SUPPORTED=y
CONFIG_SOC_GPTIMER_SUPPORTED=y
CONFIG_SOC_SDMMC_HOST_SUPPORTED=y
CONFIG_SOC_BT_SUPPORTED=y
CONFIG_SOC_PCNT_SUPPORTED=y
CONFIG_SOC_WIFI_SUPPORTED=y
CONFIG_SOC_SDIO_SLAVE_SUPPORTED=y
CONFIG_SOC_TWAI_SUPPORTED=y
CONFIG_SOC_EMAC_SUPPORTED=y
CONFIG_SOC_ULP_SUPPORTED=y
CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y
CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y
CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y
CONFIG_SOC_RTC_MEM_SUPPORTED=y
CONFIG_SOC_I2S_SUPPORTED=y
CONFIG_SOC_RMT_SUPPORTED=y
CONFIG_SOC_SDM_SUPPORTED=y
CONFIG_SOC_GPSPI_SUPPORTED=y
CONFIG_SOC_LEDC_SUPPORTED=y
CONFIG_SOC_I2C_SUPPORTED=y
CONFIG_SOC_SUPPORT_COEXISTENCE=y
CONFIG_SOC_AES_SUPPORTED=y
CONFIG_SOC_MPI_SUPPORTED=y
CONFIG_SOC_SHA_SUPPORTED=y
CONFIG_SOC_FLASH_ENC_SUPPORTED=y
CONFIG_SOC_SECURE_BOOT_SUPPORTED=y
CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y
CONFIG_SOC_BOD_SUPPORTED=y
CONFIG_SOC_ULP_FSM_SUPPORTED=y
CONFIG_SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL=5
CONFIG_SOC_XTAL_SUPPORT_26M=y
CONFIG_SOC_XTAL_SUPPORT_40M=y
CONFIG_SOC_XTAL_SUPPORT_AUTO_DETECT=y
CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y
CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y
CONFIG_SOC_ADC_DMA_SUPPORTED=y
CONFIG_SOC_ADC_PERIPH_NUM=2
CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10
CONFIG_SOC_ADC_ATTEN_NUM=4
CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2
CONFIG_SOC_ADC_PATT_LEN_MAX=16
CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=9
CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12
CONFIG_SOC_ADC_DIGI_RESULT_BYTES=2
CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4
CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=2
CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=20
CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=9
CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12
CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y
CONFIG_SOC_IDCACHE_PER_CORE=y
CONFIG_SOC_CPU_CORES_NUM=2
CONFIG_SOC_CPU_INTR_NUM=32
CONFIG_SOC_CPU_HAS_FPU=y
CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=64
CONFIG_SOC_DAC_CHAN_NUM=2
CONFIG_SOC_DAC_RESOLUTION=8
CONFIG_SOC_DAC_DMA_16BIT_ALIGN=y
CONFIG_SOC_GPIO_PORT=1
CONFIG_SOC_GPIO_PIN_COUNT=40
CONFIG_SOC_GPIO_VALID_GPIO_MASK=0xFFFFFFFFFF
CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0xEF0FEA
CONFIG_SOC_I2C_NUM=2
CONFIG_SOC_I2C_FIFO_LEN=32
CONFIG_SOC_I2C_CMD_REG_NUM=16
CONFIG_SOC_I2C_SUPPORT_SLAVE=y
CONFIG_SOC_I2C_SUPPORT_APB=y
CONFIG_SOC_I2S_NUM=2
CONFIG_SOC_I2S_HW_VERSION_1=y
CONFIG_SOC_I2S_SUPPORTS_APLL=y
CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y
CONFIG_SOC_I2S_SUPPORTS_PDM=y
CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y
CONFIG_SOC_I2S_PDM_MAX_TX_LINES=1
CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y
CONFIG_SOC_I2S_PDM_MAX_RX_LINES=1
CONFIG_SOC_I2S_SUPPORTS_ADC_DAC=y
CONFIG_SOC_I2S_SUPPORTS_ADC=y
CONFIG_SOC_I2S_SUPPORTS_DAC=y
CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA=y
CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y
CONFIG_SOC_I2S_LCD_I80_VARIANT=y
CONFIG_SOC_LCD_I80_SUPPORTED=y
CONFIG_SOC_LCD_I80_BUSES=2
CONFIG_SOC_LCD_I80_BUS_WIDTH=24
CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y
CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y
CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y
CONFIG_SOC_LEDC_CHANNEL_NUM=8
CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=20
CONFIG_SOC_MCPWM_GROUPS=2
CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3
CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3
CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2
CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2
CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2
CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3
CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y
CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3
CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3
CONFIG_SOC_MMU_PERIPH_NUM=2
CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=3
CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
CONFIG_SOC_PCNT_GROUPS=1
CONFIG_SOC_PCNT_UNITS_PER_GROUP=8
CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2
CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2
CONFIG_SOC_RMT_GROUPS=1
CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=8
CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=8
CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8
CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=64
CONFIG_SOC_RMT_SUPPORT_REF_TICK=y
CONFIG_SOC_RMT_SUPPORT_APB=y
CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT=y
CONFIG_SOC_RTCIO_PIN_COUNT=18
CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
CONFIG_SOC_SDM_GROUPS=1
CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8
CONFIG_SOC_SDM_CLK_SUPPORT_APB=y
CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED=y
CONFIG_SOC_SPI_AS_CS_SUPPORTED=y
CONFIG_SOC_SPI_PERIPH_NUM=3
CONFIG_SOC_SPI_DMA_CHAN_NUM=2
CONFIG_SOC_SPI_MAX_CS_NUM=3
CONFIG_SOC_SPI_SUPPORT_CLK_APB=y
CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64
CONFIG_SOC_SPI_MAX_PRE_DIVIDER=8192
CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y
CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y
CONFIG_SOC_TIMER_GROUPS=2
CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2
CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64
CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4
CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
CONFIG_SOC_TOUCH_VERSION_1=y
CONFIG_SOC_TOUCH_SENSOR_NUM=10
CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF
CONFIG_SOC_TWAI_CONTROLLER_NUM=1
CONFIG_SOC_TWAI_BRP_MIN=2
CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y
CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT=y
CONFIG_SOC_UART_NUM=3
CONFIG_SOC_UART_SUPPORT_APB_CLK=y
CONFIG_SOC_UART_SUPPORT_REF_TICK=y
CONFIG_SOC_UART_FIFO_LEN=128
CONFIG_SOC_UART_BITRATE_MAX=5000000
CONFIG_SOC_SPIRAM_SUPPORTED=y
CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y
CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG=y
CONFIG_SOC_SHA_SUPPORT_SHA1=y
CONFIG_SOC_SHA_SUPPORT_SHA256=y
CONFIG_SOC_SHA_SUPPORT_SHA384=y
CONFIG_SOC_SHA_SUPPORT_SHA512=y
CONFIG_SOC_RSA_MAX_BIT_LEN=4096
CONFIG_SOC_AES_SUPPORT_AES_128=y
CONFIG_SOC_AES_SUPPORT_AES_192=y
CONFIG_SOC_AES_SUPPORT_AES_256=y
CONFIG_SOC_SECURE_BOOT_V1=y
CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=y
CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32
CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21
CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y
CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y
CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD=y
CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD=y
CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y
CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y
CONFIG_SOC_PM_SUPPORT_MODEM_PD=y
CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y
CONFIG_SOC_CLK_APLL_SUPPORTED=y
CONFIG_SOC_APLL_MULTIPLIER_OUT_MIN_HZ=350000000
CONFIG_SOC_APLL_MULTIPLIER_OUT_MAX_HZ=500000000
CONFIG_SOC_APLL_MIN_HZ=5303031
CONFIG_SOC_APLL_MAX_HZ=125000000
CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y
CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y
CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y
CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y
CONFIG_SOC_SDMMC_USE_IOMUX=y
CONFIG_SOC_SDMMC_NUM_SLOTS=2
CONFIG_SOC_WIFI_WAPI_SUPPORT=y
CONFIG_SOC_WIFI_CSI_SUPPORT=y
CONFIG_SOC_WIFI_MESH_SUPPORT=y
CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y
CONFIG_SOC_WIFI_NAN_SUPPORT=y
CONFIG_SOC_BLE_SUPPORTED=y
CONFIG_SOC_BLE_MESH_SUPPORTED=y
CONFIG_SOC_BT_CLASSIC_SUPPORTED=y
CONFIG_SOC_BLUFI_SUPPORTED=y
CONFIG_SOC_ULP_HAS_ADC=y
CONFIG_SOC_PHY_COMBO_MODULE=y
CONFIG_IDF_CMAKE=y
CONFIG_IDF_TARGET_ARCH_XTENSA=y
CONFIG_IDF_TARGET_ARCH="xtensa"
CONFIG_IDF_TARGET="esp32"
CONFIG_IDF_TARGET_ESP32=y
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000

#
# Build type
#
CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
# CONFIG_APP_BUILD_TYPE_RAM is not set
CONFIG_APP_BUILD_GENERATE_BINARIES=y
CONFIG_APP_BUILD_BOOTLOADER=y
CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
# CONFIG_APP_REPRODUCIBLE_BUILD is not set
# CONFIG_APP_NO_BLOBS is not set
# CONFIG_APP_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
# CONFIG_APP_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
# end of Build type

#
# Bootloader config
#
CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
CONFIG_BOOTLOADER_LOG_LEVEL=1

#
# Serial Flash Configurations
#
# CONFIG_BOOTLOADER_SPI_CUSTOM_WP_PIN is not set
CONFIG_BOOTLOADER_SPI_WP_PIN=7
# CONFIG_BOOTLOADER_FLASH_DC_AWARE is not set
CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
# end of Serial Flash Configurations

CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
# CONFIG_BOOTLOADER_APP_ANTI_ROLLBACK is not set
CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=y
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0x10
# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
CONFIG_BOOTLOADER_RESERVE_RTC_MEM=y
# end of Bootloader config

#
# Security features
#
CONFIG_SECURE_BOOT_V1_SUPPORTED=y
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_BOOT is not set
# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
# end of Security features

#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
# end of Application manager

CONFIG_ESP_ROM_HAS_CRC_LE=y
CONFIG_ESP_ROM_HAS_CRC_BE=y
CONFIG_ESP_ROM_HAS_MZ_CRC32=y
CONFIG_ESP_ROM_HAS_JPEG_DECODE=y
CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH=y
CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y
CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y

#
# Serial flasher config
#
# CONFIG_ESPTOOLPY_NO_STUB is not set
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
CONFIG_ESPTOOLPY_FLASHMODE="dio"
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ="80m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
# end of Serial flasher config

#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp_coredump.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y
# end of Partition Table

CONFIG_LIB_BUILDER_FLASHMODE="qio"
CONFIG_LIB_BUILDER_FLASHFREQ="80m"
CONFIG_LIB_BUILDER_COMPILE=y

#
# Arduino Configuration
#
CONFIG_ARDUINO_VARIANT="esp32"
CONFIG_ENABLE_ARDUINO_DEPENDS=y
CONFIG_AUTOSTART_ARDUINO=y
# CONFIG_ARDUINO_RUN_CORE0 is not set
CONFIG_ARDUINO_RUN_CORE1=y
# CONFIG_ARDUINO_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_RUNNING_CORE=1
CONFIG_ARDUINO_LOOP_STACK_SIZE=8192
# CONFIG_ARDUINO_EVENT_RUN_CORE0 is not set
CONFIG_ARDUINO_EVENT_RUN_CORE1=y
# CONFIG_ARDUINO_EVENT_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_EVENT_RUNNING_CORE=1
# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE0 is not set
# CONFIG_ARDUINO_SERIAL_EVENT_RUN_CORE1 is not set
CONFIG_ARDUINO_SERIAL_EVENT_RUN_NO_AFFINITY=y
CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE=-1
CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE=2048
CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY=24
CONFIG_ARDUINO_UDP_RUN_CORE0=y
# CONFIG_ARDUINO_UDP_RUN_CORE1 is not set
# CONFIG_ARDUINO_UDP_RUN_NO_AFFINITY is not set
CONFIG_ARDUINO_UDP_RUNNING_CORE=0
CONFIG_ARDUINO_UDP_TASK_PRIORITY=3
# CONFIG_ARDUINO_ISR_IRAM is not set
# CONFIG_DISABLE_HAL_LOCKS is not set

#
# Debug Log Configuration
#
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_NONE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR=y
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_WARN is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=1
# CONFIG_ARDUHAL_LOG_COLORS is not set
CONFIG_ARDUHAL_ESP_LOG=y
# end of Debug Log Configuration

CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT=y
# CONFIG_ARDUHAL_PARTITION_SCHEME_MINIMAL is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_NO_OTA is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_HUGE_APP is not set
# CONFIG_ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS is not set
CONFIG_ARDUHAL_PARTITION_SCHEME="default"
# CONFIG_AUTOCONNECT_WIFI is not set
# CONFIG_ARDUINO_SELECTIVE_COMPILATION is not set
# end of Arduino Configuration

#
# ESP-NN
#
# CONFIG_NN_ANSI_C is not set
CONFIG_NN_OPTIMIZED=y
CONFIG_NN_OPTIMIZATIONS=1
# end of ESP-NN

#
# ESP RainMaker Config
#
# CONFIG_ESP_RMAKER_NO_CLAIM is not set
CONFIG_ESP_RMAKER_ASSISTED_CLAIM=y
CONFIG_ESP_RMAKER_USE_NVS=y
CONFIG_ESP_RMAKER_CLAIM_TYPE=2
# CONFIG_ESP_RMAKER_READ_MQTT_HOST_FROM_CONFIG is not set
# CONFIG_ESP_RMAKER_READ_NODE_ID_FROM_CERT_CN is not set
CONFIG_ESP_RMAKER_MQTT_HOST="a1p72mufdu6064-ats.iot.us-east-1.amazonaws.com"
CONFIG_ESP_RMAKER_MQTT_USE_BASIC_INGEST_TOPICS=y
CONFIG_ESP_RMAKER_MQTT_ENABLE_BUDGETING=y
CONFIG_ESP_RMAKER_MQTT_DEFAULT_BUDGET=100
CONFIG_ESP_RMAKER_MQTT_MAX_BUDGET=1024
CONFIG_ESP_RMAKER_MQTT_BUDGET_REVIVE_PERIOD=5
CONFIG_ESP_RMAKER_MQTT_BUDGET_REVIVE_COUNT=1
CONFIG_ESP_RMAKER_MAX_PARAM_DATA_SIZE=1024
# CONFIG_ESP_RMAKER_DISABLE_USER_MAPPING_PROV is not set
CONFIG_ESP_RMAKER_USER_ID_CHECK=y
# CONFIG_RMAKER_NAME_PARAM_CB is not set
# CONFIG_ESP_RMAKER_LOCAL_CTRL_FEATURE_ENABLE is not set
# CONFIG_ESP_RMAKER_LOCAL_CTRL_AUTO_ENABLE is not set
CONFIG_ESP_RMAKER_CONSOLE_UART_NUM_0=y
# CONFIG_ESP_RMAKER_CONSOLE_UART_NUM_1 is not set
CONFIG_ESP_RMAKER_CONSOLE_UART_NUM=0
CONFIG_ESP_RMAKER_USE_CERT_BUNDLE=y

#
# ESP RainMaker OTA Config
#
CONFIG_ESP_RMAKER_OTA_AUTOFETCH=y
CONFIG_ESP_RMAKER_OTA_AUTOFETCH_PERIOD=0
# CONFIG_ESP_RMAKER_SKIP_COMMON_NAME_CHECK is not set
CONFIG_ESP_RMAKER_SKIP_VERSION_CHECK=y
# CONFIG_ESP_RMAKER_SKIP_SECURE_VERSION_CHECK is not set
# CONFIG_ESP_RMAKER_SKIP_PROJECT_NAME_CHECK is not set
CONFIG_ESP_RMAKER_OTA_HTTP_RX_BUFFER_SIZE=1024
CONFIG_ESP_RMAKER_OTA_ROLLBACK_WAIT_PERIOD=90
# CONFIG_ESP_RMAKER_OTA_DISABLE_AUTO_REBOOT is not set
CONFIG_ESP_RMAKER_OTA_TIME_SUPPORT=y
# end of ESP RainMaker OTA Config

#
# ESP RainMaker Scheduling
#
CONFIG_ESP_RMAKER_SCHEDULING_MAX_SCHEDULES=10
# end of ESP RainMaker Scheduling

#
# ESP RainMaker Scenes
#
CONFIG_ESP_RMAKER_SCENES_MAX_SCENES=10
# CONFIG_ESP_RMAKER_SCENES_DEACTIVATE_SUPPORT is not set
# end of ESP RainMaker Scenes

#
# ESP RainMaker Command-Response
#
CONFIG_ESP_RMAKER_CMD_RESP_ENABLE=y
# CONFIG_ESP_RMAKER_CMD_RESP_TEST_ENABLE is not set
# end of ESP RainMaker Command-Response

CONFIG_ESP_RMAKER_USING_NETWORK_PROV=y
# end of ESP RainMaker Config

#
# Compiler options
#
# CONFIG_COMPILER_OPTIMIZATION_DEFAULT is not set
CONFIG_COMPILER_OPTIMIZATION_SIZE=y
# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
CONFIG_COMPILER_HIDE_PATHS_MACROS=y
CONFIG_COMPILER_CXX_EXCEPTIONS=y
CONFIG_COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
# CONFIG_COMPILER_CXX_RTTI is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_NONE is not set
CONFIG_COMPILER_STACK_CHECK_MODE_NORM=y
# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
CONFIG_COMPILER_STACK_CHECK=y
CONFIG_COMPILER_WARN_WRITE_STRINGS=y
# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set
# CONFIG_COMPILER_DUMP_RTL_FILES is not set
# end of Compiler options

#
# Component config
#

#
# Application Level Tracing
#
# CONFIG_APPTRACE_DEST_JTAG is not set
CONFIG_APPTRACE_DEST_NONE=y
# CONFIG_APPTRACE_DEST_UART1 is not set
# CONFIG_APPTRACE_DEST_UART2 is not set
CONFIG_APPTRACE_DEST_UART_NONE=y
CONFIG_APPTRACE_UART_TASK_PRIO=1
CONFIG_APPTRACE_LOCK_ENABLE=y
# end of Application Level Tracing

#
# Bluetooth
#
CONFIG_BT_ENABLED=y
CONFIG_BT_BLUEDROID_ENABLED=y
# CONFIG_BT_NIMBLE_ENABLED is not set
# CONFIG_BT_CONTROLLER_ONLY is not set
CONFIG_BT_CONTROLLER_ENABLED=y
# CONFIG_BT_CONTROLLER_DISABLED is not set

#
# Bluedroid Options
#
CONFIG_BT_BTC_TASK_STACK_SIZE=8192
CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0=y
# CONFIG_BT_BLUEDROID_PINNED_TO_CORE_1 is not set
CONFIG_BT_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BT_BTU_TASK_STACK_SIZE=8192
# CONFIG_BT_BLUEDROID_MEM_DEBUG is not set
CONFIG_BT_CLASSIC_ENABLED=y
# CONFIG_BT_CLASSIC_BQB_ENABLED is not set
CONFIG_BT_A2DP_ENABLE=y
CONFIG_BT_SPP_ENABLED=y
# CONFIG_BT_L2CAP_ENABLED is not set
CONFIG_BT_HFP_ENABLE=y
CONFIG_BT_HFP_CLIENT_ENABLE=y
CONFIG_BT_HFP_AG_ENABLE=y
CONFIG_BT_HFP_AUDIO_DATA_PATH_PCM=y
# CONFIG_BT_HFP_AUDIO_DATA_PATH_HCI is not set
# CONFIG_BT_HID_ENABLED is not set
CONFIG_BT_SSP_ENABLED=y
CONFIG_BT_BLE_ENABLED=y
CONFIG_BT_GATTS_ENABLE=y
# CONFIG_BT_GATTS_PPCP_CHAR_GAP is not set
CONFIG_BT_BLE_BLUFI_ENABLE=y
CONFIG_BT_GATT_MAX_SR_PROFILES=8
CONFIG_BT_GATT_MAX_SR_ATTRIBUTES=100
# CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO=y
CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE=0
# CONFIG_BT_GATTS_ROBUST_CACHING_ENABLED is not set
# CONFIG_BT_GATTS_DEVICE_NAME_WRITABLE is not set
# CONFIG_BT_GATTS_APPEARANCE_WRITABLE is not set
CONFIG_BT_GATTC_ENABLE=y
CONFIG_BT_GATTC_MAX_CACHE_CHAR=40
CONFIG_BT_GATTC_NOTIF_REG_MAX=5
# CONFIG_BT_GATTC_CACHE_NVS_FLASH is not set
CONFIG_BT_GATTC_CONNECT_RETRY_COUNT=3
CONFIG_BT_BLE_SMP_ENABLE=y
# CONFIG_BT_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
# CONFIG_BT_BLE_SMP_ID_RESET_ENABLE is not set
CONFIG_BT_STACK_NO_LOG=y
CONFIG_BT_ACL_CONNECTIONS=4
CONFIG_BT_MULTI_CONNECTION_ENBALE=y
# CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST is not set
CONFIG_BT_BLE_DYNAMIC_ENV_MEMORY=y
# CONFIG_BT_BLE_HOST_QUEUE_CONG_CHECK is not set
CONFIG_BT_SMP_ENABLE=y
CONFIG_BT_SMP_MAX_BONDS=15
# CONFIG_BT_BLE_ACT_SCAN_REP_ADV_SCAN is not set
CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT=30
CONFIG_BT_MAX_DEVICE_NAME_LEN=32
# CONFIG_BT_BLE_RPA_SUPPORTED is not set
CONFIG_BT_BLE_RPA_TIMEOUT=900
# CONFIG_BT_BLE_HIGH_DUTY_ADV_INTERVAL is not set
# CONFIG_BT_ABORT_WHEN_ALLOCATION_FAILS is not set
# end of Bluedroid Options

#
# Controller Options
#
# CONFIG_BTDM_CTRL_MODE_BLE_ONLY is not set
# CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY is not set
CONFIG_BTDM_CTRL_MODE_BTDM=y
CONFIG_BTDM_CTRL_BLE_MAX_CONN=3
CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN=2
CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN=0
# CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_HCI is not set
CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_PCM=y
CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=1
CONFIG_BTDM_CTRL_PCM_ROLE_EDGE_CONFIG=y
CONFIG_BTDM_CTRL_PCM_ROLE_MASTER=y
# CONFIG_BTDM_CTRL_PCM_ROLE_SLAVE is not set
CONFIG_BTDM_CTRL_PCM_POLAR_FALLING_EDGE=y
# CONFIG_BTDM_CTRL_PCM_POLAR_RISING_EDGE is not set
CONFIG_BTDM_CTRL_PCM_ROLE_EFF=0
CONFIG_BTDM_CTRL_PCM_POLAR_EFF=0
# CONFIG_BTDM_CTRL_AUTO_LATENCY is not set
CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT=y
CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF=y
CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=3
CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=2
CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CTRL_PINNED_TO_CORE_0=y
# CONFIG_BTDM_CTRL_PINNED_TO_CORE_1 is not set
CONFIG_BTDM_CTRL_PINNED_TO_CORE=0
CONFIG_BTDM_CTRL_HCI_MODE_VHCI=y
# CONFIG_BTDM_CTRL_HCI_MODE_UART_H4 is not set

#
# MODEM SLEEP Options
#
CONFIG_BTDM_CTRL_MODEM_SLEEP=y
CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_ORIG=y
# CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_EVED is not set
CONFIG_BTDM_CTRL_LPCLK_SEL_MAIN_XTAL=y
# end of MODEM SLEEP Options

CONFIG_BTDM_BLE_DEFAULT_SCA_250PPM=y
CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1
CONFIG_BTDM_BLE_SCAN_DUPL=y
CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE=y
# CONFIG_BTDM_SCAN_DUPL_TYPE_DATA is not set
# CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE is not set
CONFIG_BTDM_SCAN_DUPL_TYPE=0
CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE=20
CONFIG_BTDM_SCAN_DUPL_CACHE_REFRESH_PERIOD=0
CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN=y
CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE=100
CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED=y
# CONFIG_BTDM_CTRL_SCAN_BACKOFF_UPPERLIMITMAX is not set
CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
CONFIG_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
CONFIG_BTDM_RESERVE_DRAM=0xdb5c
CONFIG_BTDM_CTRL_HLI=y
# end of Controller Options

# CONFIG_BT_HCI_LOG_DEBUG_EN is not set

#
# Common Options
#
CONFIG_BT_ALARM_MAX_NUM=50
# end of Common Options
# end of Bluetooth

CONFIG_BLE_MESH=y
CONFIG_BLE_MESH_HCI_5_0=y
# CONFIG_BLE_MESH_RANDOM_ADV_INTERVAL is not set
CONFIG_BLE_MESH_USE_DUPLICATE_SCAN=y
CONFIG_BLE_MESH_MEM_ALLOC_MODE_INTERNAL=y
# CONFIG_BLE_MESH_MEM_ALLOC_MODE_EXTERNAL is not set
# CONFIG_BLE_MESH_MEM_ALLOC_MODE_DEFAULT is not set
# CONFIG_BLE_MESH_FREERTOS_STATIC_ALLOC is not set
CONFIG_BLE_MESH_DEINIT=y

#
# BLE Mesh and BLE coexistence support
#
# CONFIG_BLE_MESH_SUPPORT_BLE_ADV is not set
# CONFIG_BLE_MESH_SUPPORT_BLE_SCAN is not set
# end of BLE Mesh and BLE coexistence support

# CONFIG_BLE_MESH_FAST_PROV is not set
# CONFIG_BLE_MESH_NODE is not set
# CONFIG_BLE_MESH_PROVISIONER is not set
CONFIG_BLE_MESH_PROV=y
CONFIG_BLE_MESH_PB_ADV=y
# CONFIG_BLE_MESH_PB_GATT is not set
CONFIG_BLE_MESH_PROXY=y
# CONFIG_BLE_MESH_GATT_PROXY_CLIENT is not set
CONFIG_BLE_MESH_NET_BUF_POOL_USAGE=y
# CONFIG_BLE_MESH_SETTINGS is not set
CONFIG_BLE_MESH_SUBNET_COUNT=3
CONFIG_BLE_MESH_APP_KEY_COUNT=3
CONFIG_BLE_MESH_MODEL_KEY_COUNT=3
CONFIG_BLE_MESH_MODEL_GROUP_COUNT=3
CONFIG_BLE_MESH_LABEL_COUNT=3
CONFIG_BLE_MESH_CRPL=10
CONFIG_BLE_MESH_MSG_CACHE_SIZE=10
CONFIG_BLE_MESH_ADV_BUF_COUNT=60
CONFIG_BLE_MESH_IVU_DIVIDER=4
# CONFIG_BLE_MESH_IVU_RECOVERY_IVI is not set
CONFIG_BLE_MESH_TX_SEG_MSG_COUNT=1
CONFIG_BLE_MESH_RX_SEG_MSG_COUNT=1
CONFIG_BLE_MESH_RX_SDU_MAX=384
CONFIG_BLE_MESH_TX_SEG_MAX=32
# CONFIG_BLE_MESH_FRIEND is not set
# CONFIG_BLE_MESH_NO_LOG is not set

#
# BLE Mesh STACK DEBUG LOG LEVEL
#
# CONFIG_BLE_MESH_TRACE_LEVEL_NONE is not set
# CONFIG_BLE_MESH_TRACE_LEVEL_ERROR is not set
CONFIG_BLE_MESH_TRACE_LEVEL_WARNING=y
# CONFIG_BLE_MESH_TRACE_LEVEL_INFO is not set
# CONFIG_BLE_MESH_TRACE_LEVEL_DEBUG is not set
# CONFIG_BLE_MESH_TRACE_LEVEL_VERBOSE is not set
CONFIG_BLE_MESH_STACK_TRACE_LEVEL=2
# end of BLE Mesh STACK DEBUG LOG LEVEL

#
# BLE Mesh NET BUF DEBUG LOG LEVEL
#
# CONFIG_BLE_MESH_NET_BUF_TRACE_LEVEL_NONE is not set
# CONFIG_BLE_MESH_NET_BUF_TRACE_LEVEL_ERROR is not set
CONFIG_BLE_MESH_NET_BUF_TRACE_LEVEL_WARNING=y
# CONFIG_BLE_MESH_NET_BUF_TRACE_LEVEL_INFO is not set
# CONFIG_BLE_MESH_NET_BUF_TRACE_LEVEL_DEBUG is not set
# CONFIG_BLE_MESH_NET_BUF_TRACE_LEVEL_VERBOSE is not set
CONFIG_BLE_MESH_NET_BUF_TRACE_LEVEL=2
# end of BLE Mesh NET BUF DEBUG LOG LEVEL

CONFIG_BLE_MESH_CLIENT_MSG_TIMEOUT=4000

#
# Support for BLE Mesh Foundation models
#
# CONFIG_BLE_MESH_CFG_CLI is not set
# CONFIG_BLE_MESH_HEALTH_CLI is not set
CONFIG_BLE_MESH_HEALTH_SRV=y
# end of Support for BLE Mesh Foundation models

#
# Support for BLE Mesh Client/Server models
#
# CONFIG_BLE_MESH_GENERIC_ONOFF_CLI is not set
# CONFIG_BLE_MESH_GENERIC_LEVEL_CLI is not set
# CONFIG_BLE_MESH_GENERIC_DEF_TRANS_TIME_CLI is not set
# CONFIG_BLE_MESH_GENERIC_POWER_ONOFF_CLI is not set
# CONFIG_BLE_MESH_GENERIC_POWER_LEVEL_CLI is not set
# CONFIG_BLE_MESH_GENERIC_BATTERY_CLI is not set
# CONFIG_BLE_MESH_GENERIC_LOCATION_CLI is not set
# CONFIG_BLE_MESH_GENERIC_PROPERTY_CLI is not set
# CONFIG_BLE_MESH_SENSOR_CLI is not set
# CONFIG_BLE_MESH_TIME_CLI is not set
# CONFIG_BLE_MESH_SCENE_CLI is not set
# CONFIG_BLE_MESH_SCHEDULER_CLI is not set
# CONFIG_BLE_MESH_LIGHT_LIGHTNESS_CLI is not set
# CONFIG_BLE_MESH_LIGHT_CTL_CLI is not set
# CONFIG_BLE_MESH_LIGHT_HSL_CLI is not set
# CONFIG_BLE_MESH_LIGHT_XYL_CLI is not set
# CONFIG_BLE_MESH_LIGHT_LC_CLI is not set
CONFIG_BLE_MESH_GENERIC_SERVER=y
CONFIG_BLE_MESH_SENSOR_SERVER=y
CONFIG_BLE_MESH_TIME_SCENE_SERVER=y
CONFIG_BLE_MESH_LIGHTING_SERVER=y
# end of Support for BLE Mesh Client/Server models

# CONFIG_BLE_MESH_IV_UPDATE_TEST is not set
CONFIG_BLE_MESH_DISCARD_OLD_SEQ_AUTH=y

#
# BLE Mesh specific test option
#
# CONFIG_BLE_MESH_SELF_TEST is not set
# CONFIG_BLE_MESH_BQB_TEST is not set
# CONFIG_BLE_MESH_SHELL is not set
# CONFIG_BLE_MESH_DEBUG is not set
# end of BLE Mesh specific test option

# CONFIG_BLE_MESH_EXPERIMENTAL is not set

#
# Driver Configurations
#

#
# Legacy ADC Configuration
#
CONFIG_ADC_DISABLE_DAC=y
# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set

#
# Legacy ADC Calibration Configuration
#
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y
# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set
# end of Legacy ADC Calibration Configuration
# end of Legacy ADC Configuration

#
# SPI Configuration
#
# CONFIG_SPI_MASTER_IN_IRAM is not set
# CONFIG_SPI_MASTER_ISR_IN_IRAM is not set
# CONFIG_SPI_SLAVE_IN_IRAM is not set
# CONFIG_SPI_SLAVE_ISR_IN_IRAM is not set
# end of SPI Configuration

#
# TWAI Configuration
#
# CONFIG_TWAI_ISR_IN_IRAM is not set
CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC=y
CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST=y
CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID=y
CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT=y
CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
# end of TWAI Configuration

#
# UART Configuration
#
# CONFIG_UART_ISR_IN_IRAM is not set
# end of UART Configuration

#
# GPIO Configuration
#
# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set
# end of GPIO Configuration

#
# Sigma Delta Modulator Configuration
#
# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set
# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_SDM_ENABLE_DEBUG_LOG is not set
# end of Sigma Delta Modulator Configuration

#
# GPTimer Configuration
#
CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM=y
# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set
# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set
# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set
# end of GPTimer Configuration

#
# PCNT Configuration
#
# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set
# CONFIG_PCNT_ISR_IRAM_SAFE is not set
# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set
# end of PCNT Configuration

#
# RMT Configuration
#
# CONFIG_RMT_ISR_IRAM_SAFE is not set
# CONFIG_RMT_RECV_FUNC_IN_IRAM is not set
# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_RMT_ENABLE_DEBUG_LOG is not set
# end of RMT Configuration

#
# MCPWM Configuration
#
# CONFIG_MCPWM_ISR_IRAM_SAFE is not set
# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set
# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set
# end of MCPWM Configuration

#
# I2S Configuration
#
# CONFIG_I2S_ISR_IRAM_SAFE is not set
# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_I2S_ENABLE_DEBUG_LOG is not set
# end of I2S Configuration

#
# DAC Configuration
#
# CONFIG_DAC_CTRL_FUNC_IN_IRAM is not set
# CONFIG_DAC_ISR_IRAM_SAFE is not set
# CONFIG_DAC_SUPPRESS_DEPRECATE_WARN is not set
# CONFIG_DAC_ENABLE_DEBUG_LOG is not set
CONFIG_DAC_DMA_AUTO_16BIT_ALIGN=y
# end of DAC Configuration
# end of Driver Configurations

#
# eFuse Bit Manager
#
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
CONFIG_EFUSE_MAX_BLK_LEN=192
# end of eFuse Bit Manager

#
# ESP-TLS
#
CONFIG_ESP_TLS_USING_MBEDTLS=y
# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
CONFIG_ESP_TLS_SERVER=y
# CONFIG_ESP_TLS_SERVER_SESSION_TICKETS is not set
# CONFIG_ESP_TLS_SERVER_CERT_SELECT_HOOK is not set
# CONFIG_ESP_TLS_SERVER_MIN_AUTH_MODE_OPTIONAL is not set
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE is not set
# end of ESP-TLS

#
# ADC and ADC Calibration
#
# CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set
# CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set

#
# ADC Calibration Configurations
#
CONFIG_ADC_CALI_EFUSE_TP_ENABLE=y
CONFIG_ADC_CALI_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CALI_LUT_ENABLE=y
# end of ADC Calibration Configurations

CONFIG_ADC_DISABLE_DAC_OUTPUT=y
# end of ADC and ADC Calibration

#
# Wireless Coexistence
#
CONFIG_ESP_COEX_SW_COEXIST_ENABLE=y
# CONFIG_ESP_COEX_POWER_MANAGEMENT is not set
# end of Wireless Coexistence

#
# Common ESP-related
#
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
# end of Common ESP-related

#
# Ethernet
#
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_ESP32_EMAC=y
CONFIG_ETH_PHY_INTERFACE_RMII=y
CONFIG_ETH_RMII_CLK_INPUT=y
# CONFIG_ETH_RMII_CLK_OUTPUT is not set
CONFIG_ETH_RMII_CLK_IN_GPIO=0
CONFIG_ETH_DMA_BUFFER_SIZE=512
CONFIG_ETH_DMA_RX_BUFFER_NUM=10
CONFIG_ETH_DMA_TX_BUFFER_NUM=10
# CONFIG_ETH_IRAM_OPTIMIZATION is not set
CONFIG_ETH_USE_SPI_ETHERNET=y
CONFIG_ETH_SPI_ETHERNET_DM9051=y
CONFIG_ETH_SPI_ETHERNET_W5500=y
CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL=y
# CONFIG_ETH_USE_OPENETH is not set
# CONFIG_ETH_TRANSMIT_MUTEX is not set
# end of Ethernet

#
# Event Loop Library
#
# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
CONFIG_ESP_EVENT_POST_FROM_ISR=y
CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
# end of Event Loop Library

#
# GDB Stub
#
# end of GDB Stub

#
# ESP HTTP client
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH=y
# CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set
# end of ESP HTTP client

#
# HTTP Server
#
CONFIG_HTTPD_MAX_REQ_HDR_LEN=1024
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_HTTPD_LOG_PURGE_DATA is not set
CONFIG_HTTPD_WS_SUPPORT=y
# CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set
# end of HTTP Server

#
# ESP HTTPS OTA
#
# CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set
# CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set
# end of ESP HTTPS OTA

#
# ESP HTTPS server
#
CONFIG_ESP_HTTPS_SERVER_ENABLE=y
# end of ESP HTTPS server

#
# Hardware Settings
#

#
# Chip revision
#
CONFIG_ESP32_REV_MIN_0=y
# CONFIG_ESP32_REV_MIN_1 is not set
# CONFIG_ESP32_REV_MIN_1_1 is not set
# CONFIG_ESP32_REV_MIN_2 is not set
# CONFIG_ESP32_REV_MIN_3 is not set
# CONFIG_ESP32_REV_MIN_3_1 is not set
CONFIG_ESP32_REV_MIN=0
CONFIG_ESP32_REV_MIN_FULL=0
CONFIG_ESP_REV_MIN_FULL=0

#
# Maximum Supported ESP32 Revision (Rev v3.99)
#
CONFIG_ESP32_REV_MAX_FULL=399
CONFIG_ESP_REV_MAX_FULL=399
# end of Chip revision

#
# MAC Config
#
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y
# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
# CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR is not set
# CONFIG_ESP_MAC_USE_CUSTOM_MAC_AS_BASE_MAC is not set
# end of MAC Config

#
# Sleep Config
#
CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y
CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND=y
# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set
CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY=2000
# CONFIG_ESP_SLEEP_DEBUG is not set
CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS=y
# CONFIG_ESP_SLEEP_CACHE_SAFE_ASSERTION is not set
# end of Sleep Config

#
# RTC Clock Config
#
CONFIG_RTC_CLK_SRC_INT_RC=y
# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_RTC_CLK_CAL_CYCLES=1024
# end of RTC Clock Config

#
# Peripheral Control
#
# CONFIG_PERIPH_CTRL_FUNC_IN_IRAM is not set
# end of Peripheral Control

#
# Main XTAL Config
#
# CONFIG_XTAL_FREQ_26 is not set
CONFIG_XTAL_FREQ_40=y
# CONFIG_XTAL_FREQ_AUTO is not set
CONFIG_XTAL_FREQ=40
# end of Main XTAL Config
# end of Hardware Settings

#
# LCD and Touch Panel
#

#
# LCD Touch Drivers are maintained in the IDF Component Registry
#

#
# LCD Peripheral Configuration
#
CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
# CONFIG_LCD_ENABLE_DEBUG_LOG is not set
# end of LCD Peripheral Configuration
# end of LCD and Touch Panel

#
# ESP NETIF Adapter
#
CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
CONFIG_ESP_NETIF_TCPIP_LWIP=y
# CONFIG_ESP_NETIF_LOOPBACK is not set
CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y
# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set
# CONFIG_ESP_NETIF_L2_TAP is not set
# CONFIG_ESP_NETIF_BRIDGE_EN is not set
# end of ESP NETIF Adapter

#
# Partition API Configuration
#
# end of Partition API Configuration

#
# PHY
#
CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP_PHY_MAX_TX_POWER=20
CONFIG_ESP_PHY_REDUCE_TX_POWER=y
# CONFIG_ESP_PHY_ENABLE_CERT_TEST is not set
CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
# CONFIG_ESP_PHY_RF_CAL_NONE is not set
# CONFIG_ESP_PHY_RF_CAL_FULL is not set
CONFIG_ESP_PHY_CALIBRATION_MODE=0
# CONFIG_ESP_PHY_PLL_TRACK_DEBUG is not set
# end of PHY

#
# Power Management
#
# CONFIG_PM_ENABLE is not set
# end of Power Management

#
# ESP PSRAM
#
CONFIG_SPIRAM=y

#
# SPI RAM config
#
CONFIG_SPIRAM_MODE_QUAD=y
CONFIG_SPIRAM_TYPE_AUTO=y
# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
# CONFIG_SPIRAM_SPEED_40M is not set
CONFIG_SPIRAM_SPEED_80M=y
CONFIG_SPIRAM_SPEED=80
# CONFIG_SPIRAM_BOOT_INIT is not set
# CONFIG_SPIRAM_USE_MEMMAP is not set
# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
CONFIG_SPIRAM_USE_MALLOC=y
CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=4096
# CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP is not set
CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=0
# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
CONFIG_SPIRAM_CACHE_WORKAROUND=y

#
# SPIRAM cache workaround debugging
#
CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_MEMW=y
# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_DUPLDST is not set
# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_NOPS is not set
# end of SPIRAM cache workaround debugging

#
# SPIRAM workaround libraries placement
#
CONFIG_SPIRAM_CACHE_LIBJMP_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBMATH_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBNUMPARSER_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBIO_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBMEM_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBRAND_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBENV_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM=y
CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM=y
# end of SPIRAM workaround libraries placement

CONFIG_SPIRAM_BANKSWITCH_ENABLE=y
CONFIG_SPIRAM_BANKSWITCH_RESERVE=8
# CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY is not set
CONFIG_SPIRAM_OCCUPY_HSPI_HOST=y
# CONFIG_SPIRAM_OCCUPY_VSPI_HOST is not set
# CONFIG_SPIRAM_OCCUPY_NO_HOST is not set

#
# PSRAM clock and cs IO for ESP32-DOWD
#
CONFIG_D0WD_PSRAM_CLK_IO=17
CONFIG_D0WD_PSRAM_CS_IO=16
# end of PSRAM clock and cs IO for ESP32-DOWD

#
# PSRAM clock and cs IO for ESP32-D2WD
#
CONFIG_D2WD_PSRAM_CLK_IO=9
CONFIG_D2WD_PSRAM_CS_IO=10
# end of PSRAM clock and cs IO for ESP32-D2WD

#
# PSRAM clock and cs IO for ESP32-PICO-D4
#
CONFIG_PICO_PSRAM_CS_IO=10
# end of PSRAM clock and cs IO for ESP32-PICO-D4

# CONFIG_SPIRAM_2T_MODE is not set
# end of SPI RAM config
# end of ESP PSRAM

#
# ESP Ringbuf
#
# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set
# end of ESP Ringbuf

#
# ESP System Settings
#
# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y
# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160

#
# Memory
#
# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set

#
# Non-backward compatible options
#
# CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM is not set
# end of Non-backward compatible options
# end of Memory

#
# Trace memory
#
# CONFIG_ESP32_TRAX is not set
CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
# end of Trace memory

# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set
CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0

#
# Memory protection
#
# end of Memory protection

CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2048
CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096
CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_NONE is not set
CONFIG_ESP_CONSOLE_UART=y
CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
CONFIG_ESP_CONSOLE_UART_NUM=0
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_ESP_INT_WDT=y
CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
CONFIG_ESP_INT_WDT_CHECK_CPU1=y
CONFIG_ESP_TASK_WDT_EN=y
CONFIG_ESP_TASK_WDT_INIT=y
CONFIG_ESP_TASK_WDT_PANIC=y
CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
# CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set
CONFIG_ESP_DEBUG_OCDAWARE=y
CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5=y

#
# Brownout Detector
#
CONFIG_ESP_BROWNOUT_DET=y
CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_ESP_BROWNOUT_DET_LVL=0
# end of Brownout Detector

# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set
CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y
CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y
# end of ESP System Settings

#
# IPC (Inter-Processor Call)
#
CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
CONFIG_ESP_IPC_ISR_ENABLE=y
# end of IPC (Inter-Processor Call)

#
# High resolution timer (esp_timer)
#
# CONFIG_ESP_TIMER_PROFILING is not set
CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
CONFIG_ESP_TIMER_TASK_STACK_SIZE=4096
CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
# CONFIG_ESP_TIMER_SHOW_EXPERIMENTAL is not set
CONFIG_ESP_TIMER_TASK_AFFINITY=0x0
CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0=y
CONFIG_ESP_TIMER_ISR_AFFINITY=0x1
CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0=y
# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
# end of High resolution timer (esp_timer)

#
# Wi-Fi
#
CONFIG_ESP_WIFI_ENABLED=y
CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=8
CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32
CONFIG_ESP_WIFI_STATIC_TX_BUFFER=y
CONFIG_ESP_WIFI_TX_BUFFER_TYPE=0
CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=8
CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=16
CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
# CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF=5
CONFIG_ESP_WIFI_CSI_ENABLED=y
CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP_WIFI_TX_BA_WIN=6
CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP_WIFI_RX_BA_WIN=6
# CONFIG_ESP_WIFI_AMSDU_TX_ENABLED is not set
CONFIG_ESP_WIFI_NVS_ENABLED=y
CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32
# CONFIG_ESP_WIFI_IRAM_OPT is not set
# CONFIG_ESP_WIFI_EXTRA_IRAM_OPT is not set
# CONFIG_ESP_WIFI_RX_IRAM_OPT is not set
CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y
CONFIG_ESP_WIFI_ENABLE_SAE_PK=y
CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT=y
CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y
# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
CONFIG_ESP_WIFI_SLP_DEFAULT_MIN_ACTIVE_TIME=50
CONFIG_ESP_WIFI_SLP_DEFAULT_MAX_ACTIVE_TIME=10
CONFIG_ESP_WIFI_SLP_DEFAULT_WAIT_BROADCAST_DATA_TIME=15
CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=y
CONFIG_ESP_WIFI_GMAC_SUPPORT=y
CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y
# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set
CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7
# CONFIG_ESP_WIFI_NAN_ENABLE is not set
CONFIG_ESP_WIFI_MBEDTLS_CRYPTO=y
CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y
# CONFIG_ESP_WIFI_WAPI_PSK is not set
# CONFIG_ESP_WIFI_11KV_SUPPORT is not set
# CONFIG_ESP_WIFI_MBO_SUPPORT is not set
# CONFIG_ESP_WIFI_DPP_SUPPORT is not set
# CONFIG_ESP_WIFI_11R_SUPPORT is not set
# CONFIG_ESP_WIFI_WPS_SOFTAP_REGISTRAR is not set

#
# WPS Configuration Options
#
# CONFIG_ESP_WIFI_WPS_STRICT is not set
# CONFIG_ESP_WIFI_WPS_PASSPHRASE is not set
# end of WPS Configuration Options

# CONFIG_ESP_WIFI_DEBUG_PRINT is not set
# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set
CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT=y
# CONFIG_ESP_WIFI_ENT_FREE_DYNAMIC_BUFFER is not set
# end of Wi-Fi

#
# Core dump
#
CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=y
# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
# CONFIG_ESP_COREDUMP_ENABLE_TO_NONE is not set
# CONFIG_ESP_COREDUMP_DATA_FORMAT_BIN is not set
CONFIG_ESP_COREDUMP_DATA_FORMAT_ELF=y
CONFIG_ESP_COREDUMP_CHECKSUM_CRC32=y
# CONFIG_ESP_COREDUMP_CHECKSUM_SHA256 is not set
CONFIG_ESP_COREDUMP_CHECK_BOOT=y
CONFIG_ESP_COREDUMP_ENABLE=y
CONFIG_ESP_COREDUMP_LOGS=y
CONFIG_ESP_COREDUMP_MAX_TASKS_NUM=64
CONFIG_ESP_COREDUMP_STACK_SIZE=1024
# end of Core dump

#
# FAT Filesystem support
#
CONFIG_FATFS_VOLUME_COUNT=2
# CONFIG_FATFS_LFN_NONE is not set
# CONFIG_FATFS_LFN_HEAP is not set
CONFIG_FATFS_LFN_STACK=y
# CONFIG_FATFS_SECTOR_512 is not set
CONFIG_FATFS_SECTOR_4096=y
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
# CONFIG_FATFS_CODEPAGE_437 is not set
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
CONFIG_FATFS_CODEPAGE_850=y
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=850
CONFIG_FATFS_MAX_LFN=255
# CONFIG_FATFS_API_ENCODING_ANSI_OEM is not set
CONFIG_FATFS_API_ENCODING_UTF_8=y
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y
# CONFIG_FATFS_USE_FASTSEEK is not set
CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0
# end of FAT Filesystem support

#
# FreeRTOS
#

#
# Kernel
#
# CONFIG_FREERTOS_SMP is not set
# CONFIG_FREERTOS_UNICORE is not set
CONFIG_FREERTOS_HZ=1000
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1024
# CONFIG_FREERTOS_USE_IDLE_HOOK is not set
# CONFIG_FREERTOS_USE_TICK_HOOK is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY=y
CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
# end of Kernel

#
# Port
#
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y
CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y
# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
CONFIG_FREERTOS_ISR_STACKSIZE=2096
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_FPU_IN_ISR=y
CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y
# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
# end of Port

CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
CONFIG_FREERTOS_DEBUG_OCDAWARE=y
# end of FreeRTOS

#
# Hardware Abstraction Layer (HAL) and Low Level (LL)
#
CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
# CONFIG_HAL_ASSERTION_DISABLE is not set
# CONFIG_HAL_ASSERTION_SILENT is not set
# CONFIG_HAL_ASSERTION_ENABLE is not set
CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
# CONFIG_HAL_ECDSA_GEN_SIG_CM is not set
# end of Hardware Abstraction Layer (HAL) and Low Level (LL)

#
# Heap memory debugging
#
# CONFIG_HEAP_POISONING_DISABLED is not set
CONFIG_HEAP_POISONING_LIGHT=y
# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
CONFIG_HEAP_TRACING_OFF=y
# CONFIG_HEAP_TRACING_STANDALONE is not set
# CONFIG_HEAP_TRACING_TOHOST is not set
# CONFIG_HEAP_USE_HOOKS is not set
# CONFIG_HEAP_TASK_TRACKING is not set
# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
# CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH is not set
# end of Heap memory debugging

#
# Log output
#
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
# CONFIG_LOG_DEFAULT_LEVEL_INFO is not set
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=1
CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
# CONFIG_LOG_MAXIMUM_LEVEL_WARN is not set
# CONFIG_LOG_MAXIMUM_LEVEL_INFO is not set
# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
CONFIG_LOG_MAXIMUM_LEVEL=1
# CONFIG_LOG_COLORS is not set
CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
# end of Log output

#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
# CONFIG_LWIP_NETIF_API is not set
CONFIG_LWIP_TCPIP_TASK_PRIO=18
# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
# CONFIG_LWIP_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
# CONFIG_LWIP_EXTRA_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_TIMERS_ONDEMAND=y
CONFIG_LWIP_ND6=y
# CONFIG_LWIP_FORCE_ROUTER_FORWARDING is not set
CONFIG_LWIP_MAX_SOCKETS=16
# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
# CONFIG_LWIP_SO_LINGER is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
CONFIG_LWIP_SO_RCVBUF=y
# CONFIG_LWIP_NETBUF_RECVINFO is not set
CONFIG_LWIP_IP_DEFAULT_TTL=64
CONFIG_LWIP_IP4_FRAG=y
CONFIG_LWIP_IP6_FRAG=y
# CONFIG_LWIP_IP4_REASSEMBLY is not set
# CONFIG_LWIP_IP6_REASSEMBLY is not set
CONFIG_LWIP_IP_REASS_MAX_PBUFS=10
CONFIG_LWIP_IP_FORWARD=y
CONFIG_LWIP_IPV4_NAPT=y
# CONFIG_LWIP_STATS is not set
CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
CONFIG_LWIP_GARP_TMR_INTERVAL=60
CONFIG_LWIP_ESP_MLDV6_REPORT=y
CONFIG_LWIP_MLDV6_TMR_INTERVAL=40
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
# CONFIG_LWIP_DHCP_DOES_ARP_CHECK is not set
# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
CONFIG_LWIP_DHCP_OPTIONS_LEN=128
CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0
CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1

#
# DHCP server
#
CONFIG_LWIP_DHCPS=y
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# end of DHCP server

# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_IPV4=y
CONFIG_LWIP_IPV6=y
CONFIG_LWIP_IPV6_AUTOCONFIG=y
CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
# CONFIG_LWIP_IPV6_FORWARD is not set
CONFIG_LWIP_IPV6_RDNSS_MAX_DNS_SERVERS=2
CONFIG_LWIP_IPV6_DHCP6=y
# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8

#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
CONFIG_LWIP_TCP_MAXRTX=12
CONFIG_LWIP_TCP_SYNMAXRTX=6
CONFIG_LWIP_TCP_MSS=1436
CONFIG_LWIP_TCP_TMR_INTERVAL=250
CONFIG_LWIP_TCP_MSL=60000
CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5760
CONFIG_LWIP_TCP_WND_DEFAULT=5760
CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
CONFIG_LWIP_TCP_OOSEQ_TIMEOUT=6
CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS=4
# CONFIG_LWIP_TCP_SACK_OUT is not set
CONFIG_LWIP_TCP_OVERSIZE_MSS=y
# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_TCP_RTO_TIME=3000
# end of TCP

#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
# end of UDP

#
# Checksums
#
# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
# end of Checksums

CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=4096
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0=y
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x0
CONFIG_LWIP_IPV6_ND6_NUM_PREFIXES=5
CONFIG_LWIP_IPV6_ND6_NUM_ROUTERS=3
CONFIG_LWIP_IPV6_ND6_NUM_DESTINATIONS=10
CONFIG_LWIP_PPP_SUPPORT=y
# CONFIG_LWIP_PPP_ENABLE_IPV6 is not set
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
CONFIG_LWIP_PPP_NOTIFY_PHASE_SUPPORT=y
CONFIG_LWIP_PPP_PAP_SUPPORT=y
# CONFIG_LWIP_PPP_CHAP_SUPPORT is not set
# CONFIG_LWIP_PPP_MSCHAP_SUPPORT is not set
# CONFIG_LWIP_PPP_MPPE_SUPPORT is not set
# CONFIG_LWIP_ENABLE_LCP_ECHO is not set
# CONFIG_LWIP_PPP_DEBUG_ON is not set
# CONFIG_LWIP_SLIP_SUPPORT is not set

#
# ICMP
#
CONFIG_LWIP_ICMP=y
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
# end of ICMP

#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16
# end of LWIP RAW API

#
# SNTP
#
CONFIG_LWIP_SNTP_MAX_SERVERS=3
CONFIG_LWIP_DHCP_GET_NTP_SRV=y
CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1
CONFIG_LWIP_SNTP_UPDATE_DELAY=10800000
# end of SNTP

#
# DNS
#
CONFIG_LWIP_DNS_MAX_SERVERS=3
# CONFIG_LWIP_FALLBACK_DNS_SERVER_SUPPORT is not set
# end of DNS

CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7
CONFIG_LWIP_ESP_LWIP_ASSERT=y

#
# Hooks
#
# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
# CONFIG_LWIP_HOOK_IP6_ROUTE_NONE is not set
CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
# CONFIG_LWIP_HOOK_ND6_GET_GW_NONE is not set
CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE is not set
CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT=y
# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM is not set
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE is not set
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT=y
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
# CONFIG_LWIP_HOOK_IP6_INPUT_NONE is not set
# CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set
CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM=y
# end of Hooks

# CONFIG_LWIP_DEBUG is not set
# end of LWIP

#
# mbedTLS
#
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
# CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC is not set
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384
# CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN is not set
# CONFIG_MBEDTLS_DEBUG is not set

#
# mbedTLS v3.x related
#
# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set
# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set
# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
CONFIG_MBEDTLS_PKCS7_C=y

#
# DTLS-based configurations
#
# CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID is not set
# CONFIG_MBEDTLS_SSL_DTLS_SRTP is not set
# end of DTLS-based configurations
# end of mbedTLS v3.x related

#
# Certificate Bundle
#
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200
# end of Certificate Bundle

# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
CONFIG_MBEDTLS_CMAC_C=y
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_GCM_SUPPORT_NON_AES_CIPHER=y
CONFIG_MBEDTLS_HARDWARE_MPI=y
# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
CONFIG_MBEDTLS_HARDWARE_SHA=y
CONFIG_MBEDTLS_ROM_MD5=y
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
CONFIG_MBEDTLS_SHA512_C=y
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
# CONFIG_MBEDTLS_TLS_DISABLED is not set
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y

#
# TLS Key Exchange Methods
#
CONFIG_MBEDTLS_PSK_MODES=y
CONFIG_MBEDTLS_KEY_EXCHANGE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK=y
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
# end of TLS Key Exchange Methods

CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
CONFIG_MBEDTLS_SSL_PROTO_DTLS=y
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y

#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
CONFIG_MBEDTLS_CAMELLIA_C=y
# CONFIG_MBEDTLS_DES_C is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
# CONFIG_MBEDTLS_NIST_KW_C is not set
# end of Symmetric Ciphers

# CONFIG_MBEDTLS_RIPEMD160_C is not set

#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
# end of Certificates

CONFIG_MBEDTLS_ECP_C=y
# CONFIG_MBEDTLS_DHM_C is not set
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
# CONFIG_MBEDTLS_ECJPAKE_C is not set
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM=y
# CONFIG_MBEDTLS_POLY1305_C is not set
# CONFIG_MBEDTLS_CHACHA20_C is not set
# CONFIG_MBEDTLS_HKDF_C is not set
# CONFIG_MBEDTLS_THREADING_C is not set
CONFIG_MBEDTLS_ERROR_STRINGS=y
# end of mbedTLS

#
# ESP-MQTT Configurations
#
CONFIG_MQTT_PROTOCOL_311=y
# CONFIG_MQTT_PROTOCOL_5 is not set
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
# end of ESP-MQTT Configurations

#
# Newlib
#
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y
# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set
# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set
# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set
# end of Newlib

#
# NVS
#
# CONFIG_NVS_ASSERT_ERROR_CHECK is not set
# end of NVS

#
# OpenThread
#
# CONFIG_OPENTHREAD_ENABLED is not set

#
# Thread Operational Dataset
#
CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
# end of Thread Operational Dataset

CONFIG_OPENTHREAD_XTAL_ACCURACY=130
# CONFIG_OPENTHREAD_SPINEL_ONLY is not set
# CONFIG_OPENTHREAD_RX_ON_WHEN_IDLE is not set

#
# Thread Address Query Config
#
# end of Thread Address Query Config
# end of OpenThread

#
# Protocomm
#
CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y
CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y
CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y
# end of Protocomm

#
# PThreads
#
CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=2048
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
# end of PThreads

#
# MMU Config
#
CONFIG_MMU_PAGE_SIZE_64KB=y
CONFIG_MMU_PAGE_MODE="64KB"
CONFIG_MMU_PAGE_SIZE=0x10000
# end of MMU Config

#
# Main Flash configuration
#

#
# SPI Flash behavior when brownout
#
CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y
CONFIG_SPI_FLASH_BROWNOUT_RESET=y
# end of SPI Flash behavior when brownout

#
# Optional and Experimental Features (READ DOCS FIRST)
#

#
# Features here require specific hardware (READ DOCS FIRST!)
#
# end of Optional and Experimental Features (READ DOCS FIRST)
# end of Main Flash configuration

#
# SPI Flash driver
#
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=10
CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=2
CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=4096
# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set

#
# Auto-detect flash chips
#
CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED=y
CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED=y
CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED=y
CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y
CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED=y
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set
# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set
# end of Auto-detect flash chips

CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
# end of SPI Flash driver

#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3

#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
# end of SPIFFS Cache Configuration

CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y

#
# Debug Configuration
#
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
# end of Debug Configuration
# end of SPIFFS Configuration

#
# TCP Transport
#

#
# Websocket
#
CONFIG_WS_TRANSPORT=y
CONFIG_WS_BUFFER_SIZE=1024
# CONFIG_WS_DYNAMIC_BUFFER is not set
# end of Websocket
# end of TCP Transport

#
# Ultra Low Power (ULP) Co-processor
#
CONFIG_ULP_COPROC_ENABLED=y
CONFIG_ULP_COPROC_TYPE_FSM=y
CONFIG_ULP_COPROC_RESERVE_MEM=512
# end of Ultra Low Power (ULP) Co-processor

#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_64BIT is not set
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
# end of Unity unit testing library

#
# Virtual file system
#
CONFIG_VFS_SUPPORT_IO=y
CONFIG_VFS_SUPPORT_DIR=y
CONFIG_VFS_SUPPORT_SELECT=y
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
# CONFIG_VFS_SELECT_IN_RAM is not set
CONFIG_VFS_SUPPORT_TERMIOS=y
CONFIG_VFS_MAX_COUNT=8

#
# Host File System I/O (Semihosting)
#
CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
# end of Host File System I/O (Semihosting)
# end of Virtual file system

#
# Wear Levelling
#
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# end of Wear Levelling

#
# Wi-Fi Provisioning Manager
#
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
# CONFIG_WIFI_PROV_BLE_BONDING is not set
# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
# CONFIG_WIFI_PROV_KEEP_BLE_ON_AFTER_PROV is not set
CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
# end of Wi-Fi Provisioning Manager

#
# DSP Library
#
CONFIG_DSP_OPTIMIZATIONS_SUPPORTED=y
# CONFIG_DSP_ANSI is not set
CONFIG_DSP_OPTIMIZED=y
CONFIG_DSP_OPTIMIZATION=1
# CONFIG_DSP_MAX_FFT_SIZE_512 is not set
# CONFIG_DSP_MAX_FFT_SIZE_1024 is not set
# CONFIG_DSP_MAX_FFT_SIZE_2048 is not set
CONFIG_DSP_MAX_FFT_SIZE_4096=y
# CONFIG_DSP_MAX_FFT_SIZE_8192 is not set
# CONFIG_DSP_MAX_FFT_SIZE_16384 is not set
# CONFIG_DSP_MAX_FFT_SIZE_32768 is not set
CONFIG_DSP_MAX_FFT_SIZE=4096
# end of DSP Library

#
# Modbus configuration
#
CONFIG_FMB_COMM_MODE_TCP_EN=y
CONFIG_FMB_TCP_PORT_DEFAULT=502
CONFIG_FMB_TCP_PORT_MAX_CONN=5
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
# CONFIG_FMB_TCP_UID_ENABLED is not set
CONFIG_FMB_COMM_MODE_RTU_EN=y
CONFIG_FMB_COMM_MODE_ASCII_EN=y
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=3000
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
CONFIG_FMB_QUEUE_LENGTH=20
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS=0
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set
CONFIG_FMB_PORT_TASK_AFFINITY=0x0
# CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT is not set
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
CONFIG_FMB_TIMER_PORT_ENABLED=y
# CONFIG_FMB_TIMER_USE_ISR_DISPATCH_METHOD is not set
# CONFIG_FMB_EXT_TYPE_SUPPORT is not set
# end of Modbus configuration

#
# ESP serial flasher
#
CONFIG_SERIAL_FLASHER_MD5_ENABLED=y
CONFIG_SERIAL_FLASHER_RESET_HOLD_TIME_MS=100
CONFIG_SERIAL_FLASHER_BOOT_HOLD_TIME_MS=50
# end of ESP serial flasher

#
# Zigbee
#
# CONFIG_ZB_ENABLED is not set
# end of Zigbee

#
# Camera configuration
#
CONFIG_OV7670_SUPPORT=y
CONFIG_OV7725_SUPPORT=y
CONFIG_NT99141_SUPPORT=y
CONFIG_OV2640_SUPPORT=y
CONFIG_OV3660_SUPPORT=y
CONFIG_OV5640_SUPPORT=y
CONFIG_GC2145_SUPPORT=y
CONFIG_GC032A_SUPPORT=y
CONFIG_GC0308_SUPPORT=y
CONFIG_BF3005_SUPPORT=y
CONFIG_BF20A6_SUPPORT=y
# CONFIG_SC101IOT_SUPPORT is not set
CONFIG_SC030IOT_SUPPORT=y
# CONFIG_SC031GS_SUPPORT is not set
# CONFIG_SCCB_HARDWARE_I2C_PORT0 is not set
CONFIG_SCCB_HARDWARE_I2C_PORT1=y
CONFIG_SCCB_CLK_FREQ=100000
# CONFIG_GC_SENSOR_WINDOWING_MODE is not set
CONFIG_GC_SENSOR_SUBSAMPLE_MODE=y
CONFIG_CAMERA_TASK_STACK_SIZE=2048
CONFIG_CAMERA_CORE0=y
# CONFIG_CAMERA_CORE1 is not set
# CONFIG_CAMERA_NO_AFFINITY is not set
CONFIG_CAMERA_DMA_BUFFER_SIZE_MAX=32768
CONFIG_CAMERA_JPEG_MODE_FRAME_SIZE_AUTO=y
# CONFIG_CAMERA_JPEG_MODE_FRAME_SIZE_CUSTOM is not set
# end of Camera configuration

#
# Diagnostics data store
#
CONFIG_DIAG_DATA_STORE_RTC=y
# CONFIG_DIAG_DATA_STORE_FLASH is not set
# CONFIG_DIAG_DATA_STORE_DBG_PRINTS is not set
CONFIG_DIAG_DATA_STORE_REPORTING_WATERMARK_PERCENT=80

#
# RTC Store
#
CONFIG_RTC_STORE_DATA_SIZE=3072
CONFIG_RTC_STORE_CRITICAL_DATA_SIZE=2048
# end of RTC Store
# end of Diagnostics data store

#
# Diagnostics
#
CONFIG_DIAG_LOG_MSG_ARG_FORMAT_TLV=y
# CONFIG_DIAG_LOG_MSG_ARG_FORMAT_STRING is not set
CONFIG_DIAG_LOG_MSG_ARG_MAX_SIZE=64
CONFIG_DIAG_LOG_DROP_WIFI_LOGS=y
CONFIG_DIAG_ENABLE_METRICS=y
CONFIG_DIAG_METRICS_MAX_COUNT=20
CONFIG_DIAG_ENABLE_HEAP_METRICS=y
CONFIG_DIAG_ENABLE_WIFI_METRICS=y
CONFIG_DIAG_ENABLE_VARIABLES=y
CONFIG_DIAG_VARIABLES_MAX_COUNT=20
CONFIG_DIAG_ENABLE_NETWORK_VARIABLES=y
# CONFIG_DIAG_MORE_NETWORK_VARS is not set
# CONFIG_DIAG_USE_EXTERNAL_LOG_WRAP is not set
# end of Diagnostics

#
# ESP Insights
#
CONFIG_ESP_INSIGHTS_ENABLED=y
# CONFIG_ESP_INSIGHTS_DEBUG_ENABLED is not set
# CONFIG_ESP_INSIGHTS_COREDUMP_ENABLE is not set
# CONFIG_ESP_INSIGHTS_TRANSPORT_MQTT is not set
CONFIG_ESP_INSIGHTS_TRANSPORT_HTTPS=y
CONFIG_ESP_INSIGHTS_TRANSPORT_HTTPS_HOST="https://client.insights.espressif.com"
CONFIG_ESP_INSIGHTS_CLOUD_POST_MIN_INTERVAL_SEC=60
CONFIG_ESP_INSIGHTS_CLOUD_POST_MAX_INTERVAL_SEC=240
CONFIG_ESP_INSIGHTS_META_VERSION_10=y
# end of ESP Insights

#
# esp-modem
#
CONFIG_ESP_MODEM_CMUX_DEFRAGMENT_PAYLOAD=y
# CONFIG_ESP_MODEM_USE_INFLATABLE_BUFFER_IF_NEEDED is not set
CONFIG_ESP_MODEM_CMUX_DELAY_AFTER_DLCI_SETUP=0
# CONFIG_ESP_MODEM_CMUX_USE_SHORT_PAYLOADS_ONLY is not set
# CONFIG_ESP_MODEM_ADD_CUSTOM_MODULE is not set
# end of esp-modem

#
# OpenThread RCP Update
#
# CONFIG_AUTO_UPDATE_RCP is not set
# CONFIG_CREATE_OTA_IMAGE_WITH_RCP_FW is not set
# end of OpenThread RCP Update

#
# ESP Secure Cert Manager
#
# CONFIG_ESP_SECURE_CERT_SUPPORT_LEGACY_FORMATS is not set
# end of ESP Secure Cert Manager

#
# jsmn
#
# CONFIG_JSMN_PARENT_LINKS is not set
# CONFIG_JSMN_STRICT is not set
# CONFIG_JSMN_STATIC is not set
# end of jsmn

#
# libsodium
#
# end of libsodium

#
# mDNS
#
CONFIG_MDNS_MAX_INTERFACES=3
CONFIG_MDNS_MAX_SERVICES=10
CONFIG_MDNS_TASK_PRIORITY=1
CONFIG_MDNS_ACTION_QUEUE_LEN=16
CONFIG_MDNS_TASK_STACK_SIZE=4096
# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_MDNS_TASK_AFFINITY_CPU0=y
# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
CONFIG_MDNS_TASK_AFFINITY=0x0
CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
CONFIG_MDNS_TIMER_PERIOD_MS=100
# CONFIG_MDNS_NETWORKING_SOCKET is not set
# CONFIG_MDNS_SKIP_SUPPRESSING_OWN_QUERIES is not set
# CONFIG_MDNS_ENABLE_DEBUG_PRINTS is not set
CONFIG_MDNS_ENABLE_CONSOLE_CLI=y
# CONFIG_MDNS_RESPOND_REVERSE_QUERIES is not set
CONFIG_MDNS_MULTIPLE_INSTANCE=y

#
# MDNS Predefined interfaces
#
CONFIG_MDNS_PREDEF_NETIF_STA=y
CONFIG_MDNS_PREDEF_NETIF_AP=y
CONFIG_MDNS_PREDEF_NETIF_ETH=y
# end of MDNS Predefined interfaces
# end of mDNS

#
# Network Provisioning Manager
#
CONFIG_NETWORK_PROV_NETWORK_TYPE_WIFI=y
CONFIG_NETWORK_PROV_SCAN_MAX_ENTRIES=16
CONFIG_NETWORK_PROV_AUTOSTOP_TIMEOUT=30
# CONFIG_NETWORK_PROV_BLE_BONDING is not set
# CONFIG_NETWORK_PROV_BLE_FORCE_ENCRYPTION is not set
# CONFIG_NETWORK_PROV_KEEP_BLE_ON_AFTER_PROV is not set
CONFIG_NETWORK_PROV_WIFI_STA_ALL_CHANNEL_SCAN=y
# CONFIG_NETWORK_PROV_WIFI_STA_FAST_SCAN is not set
# end of Network Provisioning Manager

#
# ESP RainMaker Common
#
CONFIG_ESP_RMAKER_LIB_ESP_MQTT=y
# CONFIG_ESP_RMAKER_LIB_AWS_IOT is not set
CONFIG_ESP_RMAKER_MQTT_GLUE_LIB=1
CONFIG_ESP_RMAKER_MQTT_PORT_443=y
# CONFIG_ESP_RMAKER_MQTT_PORT_8883 is not set
CONFIG_ESP_RMAKER_MQTT_PORT=1
# CONFIG_ESP_RMAKER_MQTT_PERSISTENT_SESSION is not set
CONFIG_ESP_RMAKER_MQTT_SEND_USERNAME=y
CONFIG_ESP_RMAKER_MQTT_PRODUCT_NAME="RMDev"
CONFIG_ESP_RMAKER_MQTT_PRODUCT_VERSION="1x0"
CONFIG_ESP_RMAKER_MQTT_PRODUCT_SKU="EX00"
CONFIG_ESP_RMAKER_MQTT_USE_CERT_BUNDLE=y
CONFIG_ESP_RMAKER_MAX_MQTT_SUBSCRIPTIONS=10
CONFIG_ESP_RMAKER_MQTT_KEEP_ALIVE_INTERVAL=120
CONFIG_ESP_RMAKER_NETWORK_OVER_WIFI=y
CONFIG_ESP_RMAKER_WORK_QUEUE_TASK_STACK=4096
CONFIG_ESP_RMAKER_WORK_QUEUE_TASK_PRIORITY=5
CONFIG_ESP_RMAKER_FACTORY_PARTITION_NAME="fctry"
CONFIG_ESP_RMAKER_FACTORY_NAMESPACE="rmaker_creds"
CONFIG_ESP_RMAKER_DEF_TIMEZONE="Asia/Shanghai"
CONFIG_ESP_RMAKER_SNTP_SERVER_NAME="pool.ntp.org"
CONFIG_ESP_RMAKER_MAX_COMMANDS=10
# end of ESP RainMaker Common

#
# LittleFS
#
# CONFIG_LITTLEFS_SDMMC_SUPPORT is not set
CONFIG_LITTLEFS_MAX_PARTITIONS=3
CONFIG_LITTLEFS_PAGE_SIZE=256
CONFIG_LITTLEFS_OBJ_NAME_LEN=64
CONFIG_LITTLEFS_READ_SIZE=128
CONFIG_LITTLEFS_WRITE_SIZE=128
CONFIG_LITTLEFS_LOOKAHEAD_SIZE=128
CONFIG_LITTLEFS_CACHE_SIZE=512
CONFIG_LITTLEFS_BLOCK_CYCLES=512
CONFIG_LITTLEFS_USE_MTIME=y
# CONFIG_LITTLEFS_USE_ONLY_HASH is not set
# CONFIG_LITTLEFS_HUMAN_READABLE is not set
CONFIG_LITTLEFS_MTIME_USE_SECONDS=y
# CONFIG_LITTLEFS_MTIME_USE_NONCE is not set
# CONFIG_LITTLEFS_SPIFFS_COMPAT is not set
# CONFIG_LITTLEFS_FLUSH_FILE_EVERY_WRITE is not set
# CONFIG_LITTLEFS_FCNTL_GET_PATH is not set
# CONFIG_LITTLEFS_MULTIVERSION is not set
# CONFIG_LITTLEFS_MALLOC_STRATEGY_DISABLE is not set
CONFIG_LITTLEFS_MALLOC_STRATEGY_DEFAULT=y
# CONFIG_LITTLEFS_MALLOC_STRATEGY_INTERNAL is not set
CONFIG_LITTLEFS_ASSERTS=y
# end of LittleFS
# end of Component config

# CONFIG_IDF_EXPERIMENTAL_FEATURES is not set

# Deprecated options for backward compatibility
# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
# CONFIG_NO_BLOBS is not set
# CONFIG_ESP32_NO_BLOBS is not set
# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
CONFIG_LOG_BOOTLOADER_LEVEL_ERROR=y
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
CONFIG_LOG_BOOTLOADER_LEVEL=1
CONFIG_APP_ROLLBACK_ENABLE=y
# CONFIG_APP_ANTI_ROLLBACK is not set
# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
CONFIG_FLASHMODE_QIO=y
# CONFIG_FLASHMODE_QOUT is not set
# CONFIG_FLASHMODE_DIO is not set
# CONFIG_FLASHMODE_DOUT is not set
CONFIG_MONITOR_BAUD=115200
# CONFIG_ESP_RMAKER_LOCAL_CTRL_ENABLE is not set
# CONFIG_OPTIMIZATION_LEVEL_DEBUG is not set
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG is not set
CONFIG_OPTIMIZATION_LEVEL_RELEASE=y
CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE=y
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
CONFIG_CXX_EXCEPTIONS=y
CONFIG_CXX_EXCEPTIONS_EMG_POOL_SIZE=0
# CONFIG_STACK_CHECK_NONE is not set
CONFIG_STACK_CHECK_NORM=y
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
CONFIG_STACK_CHECK=y
CONFIG_WARN_WRITE_STRINGS=y
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_BLUEDROID_ENABLED=y
# CONFIG_NIMBLE_ENABLED is not set
CONFIG_BTC_TASK_STACK_SIZE=8192
CONFIG_BLUEDROID_PINNED_TO_CORE_0=y
# CONFIG_BLUEDROID_PINNED_TO_CORE_1 is not set
CONFIG_BLUEDROID_PINNED_TO_CORE=0
CONFIG_BTU_TASK_STACK_SIZE=8192
# CONFIG_BLUEDROID_MEM_DEBUG is not set
CONFIG_CLASSIC_BT_ENABLED=y
CONFIG_A2DP_ENABLE=y
CONFIG_HFP_ENABLE=y
CONFIG_HFP_CLIENT_ENABLE=y
CONFIG_HFP_AG_ENABLE=y
CONFIG_HFP_AUDIO_DATA_PATH_PCM=y
# CONFIG_HFP_AUDIO_DATA_PATH_HCI is not set
CONFIG_GATTS_ENABLE=y
# CONFIG_GATTS_SEND_SERVICE_CHANGE_MANUAL is not set
CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO=y
CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE=0
CONFIG_GATTC_ENABLE=y
# CONFIG_GATTC_CACHE_NVS_FLASH is not set
CONFIG_BLE_SMP_ENABLE=y
# CONFIG_SMP_SLAVE_CON_PARAMS_UPD_ENABLE is not set
# CONFIG_BLE_HOST_QUEUE_CONGESTION_CHECK is not set
CONFIG_SMP_ENABLE=y
# CONFIG_BLE_ACTIVE_SCAN_REPORT_ADV_SCAN_RSP_INDIVIDUALLY is not set
CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT=30
# CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY is not set
# CONFIG_BTDM_CONTROLLER_MODE_BR_EDR_ONLY is not set
CONFIG_BTDM_CONTROLLER_MODE_BTDM=y
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN=3
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN=2
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN=0
CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=3
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=2
CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI=y
# CONFIG_BTDM_CONTROLLER_HCI_MODE_UART_H4 is not set
CONFIG_BTDM_CONTROLLER_MODEM_SLEEP=y
CONFIG_BLE_SCAN_DUPLICATE=y
CONFIG_SCAN_DUPLICATE_BY_DEVICE_ADDR=y
# CONFIG_SCAN_DUPLICATE_BY_ADV_DATA is not set
# CONFIG_SCAN_DUPLICATE_BY_ADV_DATA_AND_DEVICE_ADDR is not set
CONFIG_SCAN_DUPLICATE_TYPE=0
CONFIG_DUPLICATE_SCAN_CACHE_SIZE=20
CONFIG_BLE_MESH_SCAN_DUPLICATE_EN=y
CONFIG_MESH_DUPLICATE_SCAN_CACHE_SIZE=100
CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED=y
CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED=y
CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_NUM=100
CONFIG_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
# CONFIG_BLE_MESH_ALLOC_FROM_PSRAM_FIRST is not set
CONFIG_ADC2_DISABLE_DAC=y
# CONFIG_MCPWM_ISR_IN_IRAM is not set
CONFIG_SW_COEXIST_ENABLE=y
CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
CONFIG_ESP_WIFI_SW_COEXIST_ENABLE=y
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_POST_EVENTS_FROM_ISR=y
CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
# CONFIG_OTA_ALLOW_HTTP is not set
# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
# CONFIG_ESP32_XTAL_FREQ_26 is not set
CONFIG_ESP32_XTAL_FREQ_40=y
# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
CONFIG_ESP32_XTAL_FREQ=40
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
CONFIG_REDUCE_PHY_TX_POWER=y
CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
CONFIG_SPIRAM_SUPPORT=y
CONFIG_ESP32_SPIRAM_SUPPORT=y
# CONFIG_WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST is not set
# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_ESP32_PANIC_PRINT_HALT is not set
CONFIG_ESP32_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32_PANIC_GDBSTUB is not set
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2048
CONFIG_MAIN_TASK_STACK_SIZE=4096
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_CONSOLE_UART_NONE is not set
# CONFIG_ESP_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART=y
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_INT_WDT_CHECK_CPU1=y
CONFIG_TASK_WDT=y
CONFIG_ESP_TASK_WDT=y
CONFIG_TASK_WDT_PANIC=y
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
# CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 is not set
# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_BROWNOUT_DET=y
CONFIG_ESP32_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_ESP32_BROWNOUT_DET_LVL=0
# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_TIMER_TASK_STACK_SIZE=4096
CONFIG_ESP32_WIFI_ENABLED=y
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=8
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=8
CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16
CONFIG_ESP32_WIFI_CSI_ENABLED=y
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_RX_BA_WIN=6
# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
# CONFIG_ESP32_WIFI_IRAM_OPT is not set
# CONFIG_ESP32_WIFI_RX_IRAM_OPT is not set
CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y
CONFIG_WPA_MBEDTLS_CRYPTO=y
CONFIG_WPA_MBEDTLS_TLS_CLIENT=y
# CONFIG_WPA_WAPI_PSK is not set
# CONFIG_WPA_11KV_SUPPORT is not set
# CONFIG_WPA_MBO_SUPPORT is not set
# CONFIG_WPA_DPP_SUPPORT is not set
# CONFIG_WPA_11R_SUPPORT is not set
# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set
# CONFIG_WPA_WPS_STRICT is not set
# CONFIG_WPA_DEBUG_PRINT is not set
# CONFIG_WPA_TESTING_OPTIONS is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH=y
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE is not set
# CONFIG_ESP32_COREDUMP_DATA_FORMAT_BIN is not set
CONFIG_ESP32_COREDUMP_DATA_FORMAT_ELF=y
CONFIG_ESP32_COREDUMP_CHECKSUM_CRC32=y
# CONFIG_ESP32_COREDUMP_CHECKSUM_SHA256 is not set
CONFIG_ESP32_ENABLE_COREDUMP=y
CONFIG_ESP32_CORE_DUMP_MAX_TASKS_NUM=64
CONFIG_ESP32_CORE_DUMP_STACK_SIZE=1024
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
# CONFIG_HAL_ASSERTION_SILIENT is not set
# CONFIG_L2_TO_L3_COPY is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=6
CONFIG_TCP_MSS=1436
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5760
CONFIG_TCP_WND_DEFAULT=5760
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=4096
# CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_TCPIP_TASK_AFFINITY_CPU0=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x0
CONFIG_PPP_SUPPORT=y
CONFIG_PPP_NOTIFY_PHASE_SUPPORT=y
CONFIG_PPP_PAP_SUPPORT=y
# CONFIG_PPP_CHAP_SUPPORT is not set
# CONFIG_PPP_MSCHAP_SUPPORT is not set
# CONFIG_PPP_MPPE_SUPPORT is not set
# CONFIG_PPP_DEBUG_ON is not set
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT=y
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_HRT is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=2048
CONFIG_ESP32_PTHREAD_STACK_MIN=768
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
CONFIG_ESP32_ULP_COPROC_ENABLED=y
CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=512
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=3000
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
# CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT is not set
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
CONFIG_MB_TIMER_PORT_ENABLED=y
# End of deprecated options

erhankur commented 9 hours ago

@Tarik2142 I have followed the steps below to run an Arduino example

idf.py create-project-from-example "espressif/arduino-esp32^3.0.2:hello_world"

I have added assert(0) to the main.cpp

#include "Arduino.h"

void setup() {
  Serial.begin(115200);
  assert(0);
}

void loop() {
  Serial.println("Hello world!");
  delay(1000);
}

And additional configs

CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH=y
CONFIG_ESP_COREDUMP_DATA_FORMAT_ELF=y
CONFIG_ESP_COREDUMP_CHECKSUM_SHA256=y
CONFIG_ESP32_PANIC_PRINT_HALT=y

Result:

I (33) boot: ESP-IDF v5.1.5-196-g64849cb703-dirty 2nd stage bootloader
I (33) boot: compile time Nov 22 2024 09:45:46
I (35) boot: Multicore bootloader
I (39) boot: chip revision: v3.0
I (43) boot.esp32: SPI Speed      : 40MHz
I (48) boot.esp32: SPI Mode       : DIO
I (52) boot.esp32: SPI Flash Size : 2MB
I (57) boot: Enabling RNG early entropy source...
I (62) boot: Partition Table:
I (66) boot: ## Label            Usage          Type ST Offset   Length
I (73) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (80) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (88) boot:  2 factory          factory app      00 00 00010000 00100000
I (95) boot:  3 coredump         Unknown data     01 03 00110000 00010000
I (103) boot: End of partition table
I (107) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=0e8a4h ( 59556) map
I (137) esp_image: segment 1: paddr=0001e8cc vaddr=3ffb0000 size=0174ch (  5964) load
I (140) esp_image: segment 2: paddr=00020020 vaddr=400d0020 size=234f8h (144632) map
I (195) esp_image: segment 3: paddr=00043520 vaddr=3ffb174c size=01034h (  4148) load
I (197) esp_image: segment 4: paddr=0004455c vaddr=40080000 size=0da34h ( 55860) load
I (231) boot: Loaded app from partition at offset 0x10000
I (231) boot: Disabling RNG early entropy source...
I (243) cpu_start: Multicore app
I (244) cpu_start: Pro cpu up.
I (244) cpu_start: Starting app cpu, entry point is 0x40081324
--- 0x40081324: call_start_cpu1 at /Users/erhan/dev/esp-idf/components/esp_system/port/cpu_start.c:160

I (0) cpu_start: App cpu up.
I (261) cpu_start: Pro cpu start user code
I (261) cpu_start: cpu freq: 160000000 Hz
I (261) cpu_start: Application information:
I (266) cpu_start: Project name:     main
I (270) cpu_start: App version:      1
I (275) cpu_start: Compile time:     Nov 22 2024 09:45:45
I (281) cpu_start: ELF file SHA256:  39b973e583883752...
I (287) cpu_start: ESP-IDF:          v5.1.5-196-g64849cb703-dirty
I (294) cpu_start: Min chip rev:     v0.0
I (298) cpu_start: Max chip rev:     v3.99 
I (303) cpu_start: Chip rev:         v3.0
I (308) heap_init: Initializing. RAM available for dynamic allocation:
I (315) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (321) heap_init: At 3FFB3820 len 0002C7E0 (177 KiB): DRAM
I (328) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (334) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (340) heap_init: At 4008DA34 len 000125CC (73 KiB): IRAM
I (348) spi_flash: detected chip: generic
I (351) spi_flash: flash io: dio
W (355) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
I (369) esp_core_dump_flash: Init core dump to flash
I (374) esp_core_dump_flash: Found partition 'coredump' @ 110000 65536 bytes
I (395) esp_core_dump_flash: Core dump data checksum is correct
I (395) esp_core_dump_flash: Found core dump 9476 bytes in flash @ 0x110000
I (399) app_start: Starting scheduler on CPU0
I (403) app_start: Starting scheduler on CPU1
I (403) main_task: Started on CPU0
I (413) main_task: Calling app_main()
I
assert failed: void setup() main.cpp:5 (0)

Backtrace: 0x40081956:0x3ffb8c80 0x40086ff5:0x3ffb8ca0 0x4008c609:0x3ffb8cc0 0x400dbe6a:0x3ffb8de0 0x400d8836:0x3ffb8e10 0x400895b1:0x3ffb8e30
--- 0x40081956: panic_abort at /Users/erhan/dev/esp-idf/components/esp_system/panic.c:466
0x40086ff5: esp_system_abort at /Users/erhan/dev/esp-idf/components/esp_system/port/esp_system_chip.c:84
0x4008c609: __assert_func at /Users/erhan/dev/esp-idf/components/newlib/assert.c:81
0x400dbe6a: setup() at /Users/erhan/workspace/arduino/hello_world/main/main.cpp:5
0x400d8836: loopTask(void*) at /Users/erhan/workspace/arduino/hello_world/managed_components/espressif__arduino-esp32/cores/esp32/main.cpp:59
0x400895b1: vPortTaskWrapper at /Users/erhan/dev/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162

ELF file SHA256: 39b973e583883752

I (185) esp_core_dump_flash: Save core dump to flash...
I (191) esp_core_dump_flash: Erase flash 12288 bytes @ 0x110000
I (452) esp_core_dump_flash: Write end offset 0x2504, check sum length 4
I (452) esp_core_dump_flash: Core dump has been saved to flash.
CPU halted.

Can you share the steps to prepare an application to reproduce the issue?

Tarik2142 commented 6 hours ago

@erhankur here is example pio project coredump_test.zip

erhankur commented 4 hours ago

Still no error. I have installed from scratch.

rst:0xc (SW_CPU_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4604
ho 0 tail 12 room 4
load:0x40078000,len:15468
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3180
entry 0x400805b8
[     2][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[    13][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[    27][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    40][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[    54][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[    67][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[    81][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    94][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[   108][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[   121][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[   135][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[   148][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[   178][D][esp32-hal-cpu.c:264] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[   196][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 3 successfully set to type UART_RX (2) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

[   207][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 1 successfully set to type UART_TX (3) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

=========== Before Setup Start ===========
Chip Info:
------------------------------------------
  Model             : ESP32
  Package           : D0WD-Q5
  Revision          : 3.00
  Cores             : 2
  CPU Frequency     : 240 MHz
  XTAL Frequency    : 40 MHz
  Features Bitfield : 0x00000032
  Embedded Flash    : No
  Embedded PSRAM    : No
  2.4GHz WiFi       : Yes
  Classic BT        : Yes
  BT Low Energy     : Yes
  IEEE 802.15.4     : No
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   384936 B ( 375.9 KB)
  Free Bytes        :   354408 B ( 346.1 KB)
  Allocated Bytes   :    23364 B (  22.8 KB)
  Minimum Free Bytes:   348984 B ( 340.8 KB)
  Largest Free Block:   118772 B ( 116.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
  Chip Size         : 16777216 B (16 MB)
  Block Size        :    65536 B (  64.0 KB)
  Sector Size       :     4096 B (   4.0 KB)
  Page Size         :      256 B (   0.2 KB)
  Bus Speed         : 40 MHz
  Bus Mode          : DIO
------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1408.0 KB, type: DATA, subtype: SPIFFS
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Nov 22 2024 15:56:59
  ESP-IDF Version   : v5.1.4-972-g632e0c2a9f-dirty
  Arduino Version   : 3.0.7
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : Espressif ESP32 Dev Module
  Arduino Variant   : esp32
  Core Debug Level  : 5
  Arduino Runs Core : 1
  Arduino Events on : 1
  CDC On Boot       : 0
============ Before Setup End ============
[   708][V][esp32-hal-uart.c:408] uartBegin(): UART0 baud(115200) Mode(800001c) rxPin(3) txPin(1)
[   717][V][esp32-hal-uart.c:497] uartBegin(): UART0 not installed. Starting installation
[   728][V][esp32-hal-uart.c:560] uartBegin(): UART0 initialization done.
coredump test

assert failed: void setup() main.cpp:7 (0)

Backtrace: 0x40082f7d:0x3ffb20d0 0x400880ed:0x3ffb20f0 0x4008cf26:0x3ffb2110 0x400d17c7:0x3ffb2240 0x400d3b6b:0x3ffb2270 0x4008a26d:0x3ffb2290
  #0  0x40082f7d in panic_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/panic.c:466
  #1  0x400880ed in esp_system_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/port/esp_system_chip.c:84
  #2  0x4008cf26 in __assert_func at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/newlib/assert.c:81
  #3  0x400d17c7 in setup() at src/main.cpp:7
  #4  0x400d3b6b in loopTask(void*) at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:59
  #5  0x4008a26d in vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162

ELF file SHA256: e524f3e79e80dbc2

Rebooting...
ets Jul 29 2019 12:21:46

Tarik2142 commented 4 hours ago

Still no error. I have installed from scratch.

rst:0xc (SW_CPU_RESET),boot:0x12 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4604
ho 0 tail 12 room 4
load:0x40078000,len:15468
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3180
entry 0x400805b8
[     2][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[    13][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[    27][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    40][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[    54][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[    67][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[    81][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    94][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[   108][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[   121][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[   135][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[   148][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[   178][D][esp32-hal-cpu.c:264] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[   196][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 3 successfully set to type UART_RX (2) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

[   207][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 1 successfully set to type UART_TX (3) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

=========== Before Setup Start ===========
Chip Info:
------------------------------------------
  Model             : ESP32
  Package           : D0WD-Q5
  Revision          : 3.00
  Cores             : 2
  CPU Frequency     : 240 MHz
  XTAL Frequency    : 40 MHz
  Features Bitfield : 0x00000032
  Embedded Flash    : No
  Embedded PSRAM    : No
  2.4GHz WiFi       : Yes
  Classic BT        : Yes
  BT Low Energy     : Yes
  IEEE 802.15.4     : No
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   384936 B ( 375.9 KB)
  Free Bytes        :   354408 B ( 346.1 KB)
  Allocated Bytes   :    23364 B (  22.8 KB)
  Minimum Free Bytes:   348984 B ( 340.8 KB)
  Largest Free Block:   118772 B ( 116.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
  Chip Size         : 16777216 B (16 MB)
  Block Size        :    65536 B (  64.0 KB)
  Sector Size       :     4096 B (   4.0 KB)
  Page Size         :      256 B (   0.2 KB)
  Bus Speed         : 40 MHz
  Bus Mode          : DIO
------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1408.0 KB, type: DATA, subtype: SPIFFS
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Nov 22 2024 15:56:59
  ESP-IDF Version   : v5.1.4-972-g632e0c2a9f-dirty
  Arduino Version   : 3.0.7
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : Espressif ESP32 Dev Module
  Arduino Variant   : esp32
  Core Debug Level  : 5
  Arduino Runs Core : 1
  Arduino Events on : 1
  CDC On Boot       : 0
============ Before Setup End ============
[   708][V][esp32-hal-uart.c:408] uartBegin(): UART0 baud(115200) Mode(800001c) rxPin(3) txPin(1)
[   717][V][esp32-hal-uart.c:497] uartBegin(): UART0 not installed. Starting installation
[   728][V][esp32-hal-uart.c:560] uartBegin(): UART0 initialization done.
coredump test

assert failed: void setup() main.cpp:7 (0)

Backtrace: 0x40082f7d:0x3ffb20d0 0x400880ed:0x3ffb20f0 0x4008cf26:0x3ffb2110 0x400d17c7:0x3ffb2240 0x400d3b6b:0x3ffb2270 0x4008a26d:0x3ffb2290
  #0  0x40082f7d in panic_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/panic.c:466
  #1  0x400880ed in esp_system_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/port/esp_system_chip.c:84
  #2  0x4008cf26 in __assert_func at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/newlib/assert.c:81
  #3  0x400d17c7 in setup() at src/main.cpp:7
  #4  0x400d3b6b in loopTask(void*) at /Users/erhan/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:59
  #5  0x4008a26d in vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162

ELF file SHA256: e524f3e79e80dbc2

Rebooting...
ets Jul 29 2019 12:21:46

first time load everything is fine, but the next time you load it you will see an error.

Tarik2142 commented 4 hours ago

This is strange. I see that your device rebooted after the crash when mine doesn't reboot.

erhankur commented 4 hours ago

My pio.ini

[env:esp32dev]
platform = https://github.com/pioarduino/platform-espressif32/releases/download/51.03.07/platform-espressif32.zip
board = esp32dev
framework = arduino
monitor_speed = 115200
monitor_filters = esp32_exception_decoder
build_type = debug
build_flags =
    -DCORE_DEBUG_LEVEL=5
    -DCONFIG_ESP_COREDUMP_ENABLE=1
    -DCONFIG_ESP_COREDUMP_TO_FLASH=1
    -DCONFIG_ESP_COREDUMP_DATA_FORMAT_ELF=1

Tarik2142 commented 4 hours ago

You can't change this in Arduino as the components are precompiled. Are you using IDF to compile the project?

Tarik2142 commented 4 hours ago

This is what I get on first boot:

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)  
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drx00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4604
ho 0 tail 12 room 4
load:0x40078000,len:15468
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3180
entry 0x400805b8
[     2][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[    13][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[    27][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    40][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[    54][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[    67][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[    81][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    94][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[   108][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[   121][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[   135][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[   148][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[   165][D][esp32-hal-cpu.c:264] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[   181][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 3 successfully set to type UART_RX (2) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

[   192][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 1 successfully set to type UART_TX (3) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

=========== Before Setup Start ===========
Chip Info:
------------------------------------------
  Model             : ESP32
  Package           : D0WD-Q5
  Revision          : 3.00
  Cores             : 2
  CPU Frequency     : 240 MHz
  XTAL Frequency    : 40 MHz
  Features Bitfield : 0x00000032
  Embedded Flash    : No
  Embedded PSRAM    : No
  2.4GHz WiFi       : Yes
  Classic BT        : Yes
  BT Low Energy     : Yes
  IEEE 802.15.4     : No
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   384936 B ( 375.9 KB)
  Free Bytes        :   354640 B ( 346.3 KB)
  Allocated Bytes   :    23180 B (  22.6 KB)
  Minimum Free Bytes:   349128 B ( 340.9 KB)
  Largest Free Block:   118772 B ( 116.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
  Chip Size         : 16777216 B (16 MB)
  Block Size        :    65536 B (  64.0 KB)
  Sector Size       :     4096 B (   4.0 KB)
  Page Size         :      256 B (   0.2 KB)
  Bus Speed         : 40 MHz
  Bus Mode          : DIO
------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1408.0 KB, type: DATA, subtype: SPIFFS
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Nov 22 2024 17:22:40
  ESP-IDF Version   : v5.1.4-972-g632e0c2a9f-dirty
  Arduino Version   : 3.0.7
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : Espressif ESP32 Dev Module
  Arduino Variant   : esp32
  Core Debug Level  : 5
  Arduino Runs Core : 1
  Arduino Events on : 1
  CDC On Boot       : 0
============ Before Setup End ============
[   694][V][esp32-hal-uart.c:408] uartBegin(): UART0 baud(115200) Mode(800001c) rxPin(3) txPin(1)
[   702][V][esp32-hal-uart.c:497] uartBegin(): UART0 not installed. Starting installation
[   714][V][esp32-hal-uart.c:560] uartBegin(): UART0 initialization done.
coredump test

assert failed: void setup() main.cpp:7 (0)

Backtrace: 0x40082f7d:0x3ffb20d0 0x400880ed:0x3ffb20f0 0x4008cf26:0x3ffb2110 0x400d17c7:0x3ffb2240 0x400d3b6b:0x3ffb2270 0x4008a26d:0x3ffb2290
  #0  0x40082f7d in panic_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/panic.c:466
  #1  0x400880ed in esp_system_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/port/esp_system_chip.c:84
  #2  0x4008cf26 in __assert_func at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/newlib/assert.c:81
  #3  0x400d17c7 in setup() at src/main.cpp:7
  #4  0x400d3b6b in loopTask(void*) at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:59
  #5  0x4008a26d in vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162

ELF file SHA256: 967d3c79df889a91
<HANGS HERE. NO REBOOT>

And here is second boot:

Reconnecting to COM8 ...         Connected!
ets Jul 29 2019 12:21:46

rst:0x1 (POWERON_RESET),boot:0x13 (S0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:4604
ho 0 tail 12 room 4
load:0x40078000,len:15468
load:0x40080400,len:4
ho 8 tail 4 room 4
load:0x40080404,len:3180
entry 0x400805b8
[     2][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[    13][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160 

[    27][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    40][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[    54][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153 

[    67][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160 

[    81][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[    94][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

[   108][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x400d2dd4
  #0  0x400d2dd4 in _uartDetachBus_RX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:153

[   121][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x400d2da4
  #0  0x400d2da4 in _uartDetachBus_TX at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:160

[   135][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x400d2d74
  #0  0x400d2d74 in _uartDetachBus_CTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:167

[   148][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x400d2d44
  #0  0x400d2d44 in _uartDetachBus_RTS at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:174

E (337) esp_core_dump_flash: C?����dump data check failed:
Calculated checksum='9f097598'
Image checksum='ffffffff'
[   178][D][esp32-hal-cpu.c:264] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[   201][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 3 successfully set to type UART_RX (2) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

[   212][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 1 successfully set to type UART_TX (3) with bus 0x3ffbdb60
  #0  0x3ffbdb60 in ?? at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-uart.c:82

=========== Before Setup Start ===========
Chip Info:
------------------------------------------
  Model             : ESP32
  Package           : D0WD-Q5
  Revision          : 3.00
  Cores             : 2
  CPU Frequency     : 240 MHz
  XTAL Frequency    : 40 MHz
  Features Bitfield : 0x00000032
  Embedded Flash    : No
  Embedded PSRAM    : No
  2.4GHz WiFi       : Yes
  Classic BT        : Yes
  BT Low Energy     : Yes
  IEEE 802.15.4     : No
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
  Total Size        :   384936 B ( 375.9 KB)
  Free Bytes        :   354640 B ( 346.3 KB)
  Allocated Bytes   :    23180 B (  22.6 KB)
  Minimum Free Bytes:   349128 B ( 340.9 KB)
  Largest Free Block:   118772 B ( 116.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
  Chip Size         : 16777216 B (16 MB)
  Block Size        :    65536 B (  64.0 KB)
  Sector Size       :     4096 B (   4.0 KB)
  Page Size         :      256 B (   0.2 KB)
  Bus Speed         : 40 MHz
  Bus Mode          : DIO
------------------------------------------
Partitions Info:
------------------------------------------
                nvs : addr: 0x00009000, size:    20.0 KB, type: DATA, subtype: NVS
            otadata : addr: 0x0000E000, size:     8.0 KB, type: DATA, subtype: OTA
               app0 : addr: 0x00010000, size:  1280.0 KB, type:  APP, subtype: OTA_0
               app1 : addr: 0x00150000, size:  1280.0 KB, type:  APP, subtype: OTA_1
             spiffs : addr: 0x00290000, size:  1408.0 KB, type: DATA, subtype: SPIFFS
           coredump : addr: 0x003F0000, size:    64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
  Compile Date/Time : Nov 22 2024 17:22:40
  ESP-IDF Version   : v5.1.4-972-g632e0c2a9f-dirty
  Arduino Version   : 3.0.7
------------------------------------------
Board Info:
------------------------------------------
  Arduino Board     : Espressif ESP32 Dev Module
  Arduino Variant   : esp32
  Core Debug Level  : 5
  Arduino Runs Core : 1
  Arduino Events on : 1
  CDC On Boot       : 0
============ Before Setup End ============
[   713][V][esp32-hal-uart.c:408] uartBegin(): UART0 baud(115200) Mode(800001c) rxPin(3) txPin(1)
[   722][V][esp32-hal-uart.c:497] uartBegin(): UART0 not installed. Starting installation
[   733][V][esp32-hal-uart.c:560] uartBegin(): UART0 initialization done.
coredump test

assert failed: void setup() main.cpp:7 (0)

Backtrace: 0x40082f7d:0x3ffb20d0 0x400880ed:0x3ffb20f0 0x4008cf26:0x3ffb2110 0x400d17c7:0x3ffb2240 0x400d3b6b:0x3ffb2270 0x4008a26d:0x3ffb2290
  #0  0x40082f7d in panic_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/panic.c:466
  #1  0x400880ed in esp_system_abort at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/esp_system/port/esp_system_chip.c:84
  #2  0x4008cf26 in __assert_func at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/newlib/assert.c:81
  #3  0x400d17c7 in setup() at src/main.cpp:7
  #4  0x400d3b6b in loopTask(void*) at C:/Users/Tarik2142/.platformio/packages/framework-arduinoespressif32/cores/esp32/main.cpp:59
  #5  0x4008a26d in vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/FreeRTOS-Kernel/portable/xtensa/port.c:162

ELF file SHA256: 967d3c79df889a91

espressif / esp-idf