Open idrougge opened 1 year ago
Hi @idrougge I didn't quite understand what usbmodem1234563 is. When I have all the mentioned classes such as CDC, NET, DFU enabled and I open the serial port tool on /dev/ttyACM0 and enter the "help" command, everything seems to be working fine. Although I tried it with an ESP32-S3.
123456
is the predefined identifier for the CDC unit: CONFIG_TINYUSB_DESC_SERIAL_STRING="123456"
I have tried this on both a ESP32-WROOM and a ESP32S2F card and they both fail in the same way. Unfortunately I have no S3 units to test on.
@idrougge I would like to ask how you communicate between S3 and PC,I have burned the project and only print it, but I cannot input it to S3
----------------------------- Delete below -----------------------------
If your issue is a general question, starts similar to "How do I..", or is related to 3rd party development kits/libs, please discuss this on our community forum at esp32.com instead.
INSTRUCTIONS
Before submitting a new issue, please follow the checklist and try to find the answer.
If the issue cannot be solved after the steps before, please follow these instructions so we can get the needed information to help you in a quick and effective fashion.
----------------------------- Delete above -----------------------------
Environment
git describe --tags
to find it): v4.4.5-104-g8b94183xtensa-esp32-elf-gcc --version
to find it): xtensa-esp32-elf-gcc (crosstool-NG esp-2021r2-patch5) 8.4.0Problem Description
//Detailed problem description goes here.
Expected Behavior
Actual Behavior
Steps to repropduce
add_usb_solutions
.esp-iot-solution/example/usb/device/usb_dongle
idf.py set-target esp32s2
idf.py menuconfig
menuconfig
, go toComponents → TinyUSB Stack
.Example Configuration
inmenuconfig
root is disabled.idf.py build dfu dfu-flash
usbmodem1234563
.help
, press return.>cognised. Enter ›help‹ to view a list of available commands.
help
again.>cognised. Enter ›help‹ to view a list of available commands.
// It helps if you attach a picture of your setup/wiring here.
Code to reproduce this issue
Refer to https://github.com/espressif/esp-iot-solution/blob/usb/add_usb_solutions/examples/usb/device/usb_dongle/README_EN.md
Debug Logs
Other items if possible
build
folder (note this may contain all the code details and symbols of your project.)