search

espressif / esp-iot-solution

Espressif IoT Library. IoT Device Drivers, Documentations and Solutions.
Apache License 2.0
1.99k stars 787 forks source link

usb cdc 4g module issue (AEGHB-580) #339

Open achao1104 opened 8 months ago

achao1104 commented 8 months ago

Answers checklist.

General issue report

idf5.1 esp32s3-WROOM-1-N4R8 and master branch of esp-iot-solution

I have tried endpoint address in/out 0x84/0x3 0x85/0x4 0x83/0x2 0x81/0x1 however, the issue is like below, and please help.

ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT) SPIWP:0xee mode:DIO, clock div:1 load:0x3fce3818,len:0x18e8 load:0x403c9700,len:0x4 load:0x403c9704,len:0xda4 load:0x403cc700,len:0x3084 entry 0x403c9934 I (27) boot: ESP-IDF HEAD-HASH-NOTFOUND 2nd stage bootloader I (27) boot: compile time Feb 21 2024 12:01:58 I (27) boot: Multicore bootloader I (31) boot: chip revision: v0.2 I (35) qio_mode: Enabling default flash chip QIO I (40) boot.esp32s3: Boot SPI Speed : 80MHz I (45) boot.esp32s3: SPI Mode : QIO I (50) boot.esp32s3: SPI Flash Size : 4MB I (54) boot: Enabling RNG early entropy source... I (60) boot: Partition Table: I (63) boot: ## Label Usage Type ST Offset Length I (71) boot: 0 nvs WiFi data 01 02 00009000 00006000 I (78) boot: 1 phy_init RF data 01 01 0000f000 00001000 I (85) boot: 2 factory factory app 00 00 00010000 00100000 I (93) boot: 3 storage Unknown data 01 82 00110000 00100000 I (100) boot: End of partition table I (105) esp_image: segment 0: paddr=00010020 vaddr=3c0b0020 size=2b904h (178436) map I (140) esp_image: segment 1: paddr=0003b92c vaddr=3fc9aa00 size=04564h ( 17764) load I (144) esp_image: segment 2: paddr=0003fe98 vaddr=40374000 size=00180h ( 384) load I (146) esp_image: segment 3: paddr=00040020 vaddr=42000020 size=a1e80h (663168) map I (255) esp_image: segment 4: paddr=000e1ea8 vaddr=40374180 size=1678ch ( 92044) load I (282) boot: Loaded app from partition at offset 0x10000 I (283) boot: Disabling RNG early entropy source... I (294) cpu_start: Multicore app I (294) cpu_start: Pro cpu up. I (294) cpu_start: Starting app cpu, entry point is 0x40375884 0x40375884: call_start_cpu1 at D:/project/datacollection/Espressif/frameworks/esp-idf-v5.1.2/components/esp_system/port/cpu_start.c:157

I (0) cpu_start: App cpu up. I (312) cpu_start: Pro cpu start user code I (312) cpu_start: cpu freq: 240000000 Hz I (312) cpu_start: Application information: I (315) cpu_start: Project name: usb_cdc_4g_module I (321) cpu_start: App version: 26ec17b8 I (326) cpu_start: Compile time: Mar 4 2024 15:18:53 I (332) cpu_start: ELF file SHA256: e974879d59b27fe9... I (338) cpu_start: ESP-IDF: HEAD-HASH-NOTFOUND I (344) cpu_start: Min chip rev: v0.0 I (349) cpu_start: Max chip rev: v0.99 I (354) cpu_start: Chip rev: v0.2 I (358) heap_init: Initializing. RAM available for dynamic allocation: I (366) heap_init: At 3FCA2578 len 00047198 (284 KiB): DRAM I (372) heap_init: At 3FCE9710 len 00005724 (21 KiB): STACK/DRAM I (379) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM I (385) heap_init: At 600FE010 len 00001FD8 (7 KiB): RTCRAM I (392) spi_flash: detected chip: generic I (396) spi_flash: flash io: qio I (400) sleep: Configure to isolate all GPIO pins in sleep state I (406) sleep: Enable automatic switching of GPIO sleep configuration I (414) app_start: Starting scheduler on CPU0 I (418) app_start: Starting scheduler on CPU1 I (418) main_task: Started on CPU0 I (428) main_task: Calling app_main() I (438) 4g_main: ==================================== I (438) 4g_main: ESP 4G Cat.1 Wi-Fi Router I (442) 4g_main: ==================================== I (449) ch423: ch423_init success I (452) modem_board: iot_usbh_modem, version: 0.2.1 I (458) modem_board: Force reset modem board.... I (463) gpio: GPIO[0]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 I (472) modem_board: Resetting modem using io=0, level=0 I (678) modem_board: Waiting for modem initialize ready I (5678) USB_HCDC: iot_usbh_cdc, version: 0.2.2 I (5678) IOT_USBH: iot_usbh, version: 0.2.1 I (5708) IOT_USBH: USB Port=1 init succeed, fifo strategy=0 I (5708) IOT_USBH: usb port start succeed I (5708) IOT_USBH: USB Processing Start I (5708) USB_HCDC: usbh cdc driver install succeed I (5712) IOT_USBH: Waiting USB Connection I (5718) USB_HCDC: Waiting CDC Device Connection I (5722) IOT_USBH: Port power: ON Succeed I (5708) USB_HCDC: CDC task start I (25920) IOT_USBH: line 131 PORT_EVENT_CONNECTION I (26020) IOT_USBH: Resetting Port I (26080) IOT_USBH: Port reset succeed I (26080) IOT_USBH: Getting Port Speed I (26080) IOT_USBH: USB Speed: full-speed I (26083) IOT_USBH: Pipe init succeed, addr: 00 I (26088) IOT_USBH: Set Device Addr = 1 I (26093) IOT_USBH: Set Device Addr Done I (26097) IOT_USBH: get device desc I (26101) IOT_USBH: get device desc, actual_num_bytes:26 Device descriptor bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0x0 bDeviceSubClass 0x0 bDeviceProtocol 0x0 bMaxPacketSize0 64 idVendor 0x1782 idProduct 0x4e00 bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerialNumber 0 bNumConfigurations 1 I (26130) IOT_USBH: get short config desc I (26135) IOT_USBH: get config desc, actual_num_bytes:16 I (26141) IOT_USBH: get full config desc I (26146) IOT_USBH: get full config desc, actual_num_bytes:152 Configuration descriptor bLength 9 bDescriptorType 2 wTotalLength 144 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 bMaxPower 400mA Interface Association Descriptor bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 0xe0 bFunctionSubClass 0x1 bFunctionProtocol 0x3 iFunction 5 Interface descriptor bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 0xe0 bInterfaceSubClass 0x1 bInterfaceProtocol 0x3 iInterface 3 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 0x3 INT wMaxPacketSize 8 bInterval 16 Interface descriptor bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 0xa bInterfaceSubClass 0x0 bInterfaceProtocol 0x0 iInterface 4 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x1 EP 1 OUT bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Interface descriptor bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 0xff bInterfaceSubClass 0x0 bInterfaceProtocol 0x0 iInterface 6 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x2 EP 2 OUT bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Interface descriptor bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 0xff bInterfaceSubClass 0x0 bInterfaceProtocol 0x0 iInterface 6 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x3 EP 3 OUT bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Interface descriptor bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 0xff bInterfaceSubClass 0x0 bInterfaceProtocol 0x0 iInterface 6 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Endpoint descriptor bLength 7 bDescriptorType 5 bEndpointAddress 0x4 EP 4 OUT bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 I (26400) IOT_USBH: Set Device Configuration = 1 I (26406) IOT_USBH: Set Device Configuration Done I (26411) IOT_USBH: Pipe init succeed, addr: 84 I (26416) IOT_USBH: Pipe init succeed, addr: 03 I (26421) USB_HCDC: CDC Device Connected I (26426) esp-modem: --------- Modem PreDefined Info ------------------ I (26433) esp-modem: Model: User Defined I (26438) esp-modem: Modem itf: IN Addr:0x84, OUT Addr:0x03 I (26444) esp-modem: ---------------------------------------------------- I (26452) USB_HCDC: rx0 flush -0 = 0 I (26452) modem_board: DTE reconnect, reconnecting ...

I (27462) modem_board: reconnect after 5s... I (28462) modem_board: reconnect after 4s... I (29462) modem_board: reconnect after 3s... I (30462) modem_board: reconnect after 2s... I (31462) modem_board: reconnect after 1s... I (31462) modem_board: Modem state STAGE_SYNC, Start E (31493) esp-modem-dte: esp_dte_handle_line(79): handle line failed E (31516) esp-modem-dte: esp_dte_handle_line(79): handle line failed I (31516) modem_board: Network Auto reconnecting ... W (31518) 4g_main: Modem Board Event: Network disconnected E (31524) led_indicator: ./managed_components/espressif__led_indicator/src/led_indicator.c:461 (led_indicator_stop):invalid p_handle I (31518) modem_board: Modem state STAGE_SYNC, Success! I (31642) modem_board: Modem state STAGE_CHECK_SIM, Start W (31665) esp_modem_dce: esp_modem_dce_generic_command(31): Command:AT+CPIN? ...failed W (31689) esp_modem_dce: esp_modem_dce_generic_command(31): Command:AT+CPIN=1234 ...failed W (31713) esp_modem_dce: esp_modem_dce_generic_command(31): Command:AT+CPIN? ...failed W (31713) modem_board: Get SIM card state failed W (31716) modem_board: Modem state STAGE_CHECK_SIM, Failed, retry1, after 3000ms... I (34724) modem_board: Modem state STAGE_CHECK_SIM, Start W (34747) esp_modem_dce: esp_modem_dce_generic_command(31): Command:AT+CPIN?

leeebo commented 8 months ago

@achao1104 Did you config the IO for 4G reset? please retry if not.

And please note not all 4G modules support PPP protocol, for example, some modules only support ECM or custom protocols, please contact the supplier to confirm whether PPP dial-up is supported.

achao1104 commented 8 months ago

@achao1104 Did you config the IO for 4G reset? please retry if not.

And please note not all 4G modules support PPP protocol, for example, some modules only support ECM or custom protocols, please contact the supplier to confirm whether PPP dial-up is supported.

the 4g module is air795ug which is using the same chipset as air724ug. so I think it can support PPP.