sanketwadekar
commented
1 year ago @qrri4912 Please send complete device side logs from Serial monitor as well as screenshots from the iOS app. Also, if the iOS app is not able to discover the esp32 device, go to your Bluetooth settings, "Forget the device" and try again.
hola comunidad, como decía en el correo de rainmaker, el problema que tengo es que la app esp rainmaker no detectaba el bluetooth de los celulares iPhone, solo Android y conectaba inmediatamente al wifi, ingresándole las credenciales por vía bluetooth desde el celular Android, pero el iPhone ni reconocía el esp32 en modo bluetooth, entonces en varios hilos, hasta le pregunte a la inteligencia artificial de que cual podría ser el problema; a lo que me dijo que intentara actualizar el firmware del esp32. Lo hice y funciono pero se queda como lageado(tildado) la app y no avanza, ya si detecta el bluetooth de los iPhone, pero no conecta al wifi, cuando le ingreso las credenciales, que hice volví a grabar el sketch del arduino al esp32 (la programación) y cuando volví a ingresarle las credenciales acepto pero se tildo en el siguiente paso, no se a que se deba ese problema, si es por que se graba muy rápido el código al esp32, o alguien que me pueda dar una mano para poder solucionar este problema y mil gracias. ------------ hello community, as I said in the rainmaker email, the problem I have is that the esp rainmaker app did not detect the bluetooth of the iPhone cell phones, only Android and immediately connected to the wifi, entering the credentials via bluetooth from the Android cell phone, but the iPhone didn't even recognize the esp32 in bluetooth mode, so in several threads, I even asked the artificial intelligence what the problem could be; to which he told me to try to update the firmware of the esp32. I did it and it worked but the app stays as lagged and does not advance, it detects the bluetooth of the iPhone, but it does not connect to the wifi, when I enter the credentials, which I did I re-recorded the arduino sketch to the esp32 (the programming) and when I re-entered the credentials I accept but it crashed in the next step, I don't know what caused this problem, if it is because the code is saved very quickly to the esp32, or someone who can give me a hand to be able to solve this problem and thank you very much.