search

espressif / esp-skainet

Espressif intelligent voice assistant
Other
533 stars 117 forks source link

test example cn_speech_commands_recognition error (AIS-1305) #109

Open Liuyuehuixue opened 11 months ago

Liuyuehuixue commented 11 months ago

请问使用ESP32-S3-BOX-Lite 测试cn_speech_commands_recognition例子，flash monitor 后出现如下信息： I (322) opi psram: BurstLen : 0x01 (32 Byte) I (327) opi psram: Readlatency : 0x02 (10 cycles@Fixed) I (333) opi psram: DriveStrength: 0x00 (1/1) W (338) PSRAM: DO NOT USE FOR MASS PRODUCTION! Timing parameters will be updated in future IDF version. I (349) spiram: Found 64MBit SPI RAM device I (353) spiram: SPI RAM mode: sram 80m I (358) spiram: PSRAM initialized, cache is in normal (1-core) mode. I (365) cpu_start: Pro cpu up. I (368) cpu_start: Starting app cpu, entry point is 0x40379488 0x40379488: call_start_cpu1 at C:/Espressif/frameworks/esp-idf-v4.4.4/components/esp_system/port/cpu_start.c:148

I (0) cpu_start: App cpu up. I (660) spiram: SPI SRAM memory test OK I (669) cpu_start: Pro cpu start user code I (669) cpu_start: cpu freq: 240000000 I (669) cpu_start: Application information: I (672) cpu_start: Project name: speech_commands_recognition I (678) cpu_start: App version: v0.3.0-258-ga9429c3-dirty I (685) cpu_start: Compile time: Aug 10 2023 17:26:01 I (691) cpu_start: ELF file SHA256: fd258b55f4ebd1dc... I (697) cpu_start: ESP-IDF: v4.4.4-dirty I (702) heap_init: Initializing. RAM available for dynamic allocation: I (710) heap_init: At 3FC9FC28 len 00049AE8 (294 KiB): D/IRAM I (716) heap_init: At 3FCE9710 len 00005724 (21 KiB): STACK/DRAM I (723) heap_init: At 600FE000 len 00002000 (8 KiB): RTCRAM I (729) spiram: Adding pool of 8192K of external SPI memory to heap allocator I (737) spi_flash: detected chip: gd I (741) spi_flash: flash io: qio I (745) sleep: Configure to isolate all GPIO pins in sleep state I (752) sleep: Enable automatic switching of GPIO sleep configuration I (759) cpu_start: Starting scheduler on PRO CPU. I (0) cpu_start: Starting scheduler on APP CPU. I (779) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations I (779) MODEL_LOADER: The storage free size is 15360 KB I (789) MODEL_LOADER: The partition size is 5168 KB I (799) MODEL_LOADER: Successfully map model partition I (799) I2S: DMA Malloc info, datalen=blocksize=320, dma_buf_count=6 I (809) I2S: I2S0, MCLK output by GPIO42 I (809) I2S: DMA Malloc info, datalen=blocksize=1280, dma_buf_count=6

无error

之后串口工具，对应COM调试不通。 sdkconfig esp32s3,esp32s3eye, esp32s3box都尝试过，都是一样的问题，请问是什么原因呢？

BlueSkyB commented 11 months ago

Hi Liuyuehuixue, The skainet don't support ESP32-S3-BOX-Lite. You can view the supported boards from README.md.

Liuyuehuixue commented 11 months ago

thank you for your reply. Hmm, I've seen the documentation. I tried to use the configuration file of ESP32S3-Box, and the compilation was successful. The terminal can print the identification command and start detection information, but the following error message appears: E (820) I2C_If: Fail to write to dev 80

Is it feasible to change the relevant configuration of the file configuration esp32_s3_box_board.h? For example, try to change the following configuration: /**

/**

I would be very grateful if you could give me some advice.

feizi commented 10 months ago

Hi @Liuyuehuixue , I do not know about this issues. May you can ask for help under esp-bsp project. They know more about hardware drivers.