板子使用的esp32-korvo-v1.1 在编译wake_word_detection这个程序的时候出现了cc1.exe: some warnings being treated as errors的错误，在stackoverflow上找到了解决方法，在makefile中加入CFLAGS = "-Wno-error" CXXFLAGS = "-Wno-error"来忽略警告引起的错误，但是仍然不起作用，请问有什么解决方案

C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:395:64: note: each undeclared identifier is reported only once for each function it appears in At top level: C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:262:18: warning: 'bsp_i2s_deinit' defined but not used [-Wunused-function] static esp_err_t bsp_i2s_deinit(i2s_port_t i2s_num) ^~~~~~ cc1.exe: some warnings being treated as errors [979/988] Building C object esp-idf/player/CMakeFiles/__idf_player.dir/esp_skainet_player.c.obj In file included from C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/semphr.h:35, from C:/Users/MSI/esp/esp-idf/components/driver/include/driver/i2s.h:20, from C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:8: C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c: In function 'esp_skainet_stream_in_task': C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:93:31: warning: passing argument 1 of 'xQueueGenericSend' from incompatible pointer type [-Wincompatible-pointer-types] xQueueSend(player->player_queue, buffer, portMAX_DELAY); C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:421:80: note: in definition of macro 'xQueueSend'

define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )

                                                                            ^~~~~~

C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:572:45: note: expected 'QueueHandle_t' {aka 'struct QueueDefinition '} but argument is of type 'struct RingBuf ' BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;


C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:94:31: warning: passing argument 1 of 'xQueueGenericSend' from incompatible pointer type [-Wincompatible-pointer-types]
              xQueueSend(player->player_queue, buffer+player->frame_size, portMAX_DELAY);
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:421:80: note: in definition of macro 'xQueueSend'
 #define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )
                                                                                ^~~~~~
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:572:45: note: expected 'QueueHandle_t' {aka 'struct QueueDefinition *'} but argument is of type 'struct RingBuf *' BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
                               ~~~~~~~~~~~~~~^~~~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:98:30: warning: passing argument 1 of 'xQueueGenericSend' from incompatible pointer type [-Wincompatible-pointer-types]
             xQueueSend(player->player_queue, buffer, portMAX_DELAY);
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:421:80: note: in definition of macro 'xQueueSend'

Hi, @PandaChen-pro ,

这个问题如果不能在本地通过改写 make 解决的话，建议可以直接将 https://github.com/espressif/esp-skainet/blob/aa4f57e5fa0a52e2db6ceb1d9830af4c05cabccf/components/hardware_driver/boards/esp32-korvo/bsp_board.c#L262 该函数注释掉先使用，注释掉该函数不影响功能。

我们会最近修复这个问题，谢谢反馈！

另：ESP32S3 支持的唤醒模型相比 ESP32 有很大提升，如方便，我们建议后续可以使用 ESP32S3.

嗨，@PandaChen-pro，

这个如果不能在本地通过改写问题提出解决方案，建议可以直接将

https://github.com/espressif/esp-skainet/blob/aa4f57e5fa0a52e2db6ceb1d9830af4c05cabccf/components/hardware_driver/boards/esp32-korvo/bsp_board.c#L262

该函数注释掉先使用，注释掉该函数不影响功能。我们会最近修复这个问题，谢谢反馈！

另 ESP3S3 支持的触控模式相比 ESP32 有很大的提升，如方便，我们建议使用 ESP3S32。

您好。按照您的方式，将static esp_err_t bsp_codec_prob(int *codec_type)此函数注释，仍然还是报错，具体的报错日志如下：

[964/988] Building C object esp-idf/hardware_driver/CMakeFiles/idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj FAILED: esp-idf/hardware_driver/CMakeFiles/idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj D:\Develop_Tools.espressif\tools\xtensa-esp32-elf\esp-2021r2-8.4.0\xtensa-esp32-elf\bin\xtensa-esp32-elf-gcc.exe -Iconfig -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es7210 -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es8311 -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es8388 -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/i2c_bus/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/led/include -IC:/Users/MSI/esp/esp-idf/components/newlib/platform_include -IC:/Users/MSI/esp/esp-idf/components/freertos/include -IC:/Users/MSI/esp/esp-idf/components/freertos/port/xtensa/include -IC:/Users/MSI/esp/esp-idf/components/esp_hw_support/include -IC:/Users/MSI/esp/esp-idf/components/esp_hw_support/port/esp32/. -IC:/Users/MSI/esp/esp-idf/components/heap/include -IC:/Users/MSI/esp/esp-idf/components/log/include -IC:/Users/MSI/esp/esp-idf/components/lwip/include/apps -IC:/Users/MSI/esp/esp-idf/components/lwip/include/apps/sntp -IC:/Users/MSI/esp/esp-idf/components/lwip/lwip/src/include -IC:/Users/MSI/esp/esp-idf/components/lwip/port/esp32/include -IC:/Users/MSI/esp/esp-idf/components/lwip/port/esp32/include/arch -IC:/Users/MSI/esp/esp-idf/components/soc/include -IC:/Users/MSI/esp/esp-idf/components/soc/esp32/. -IC:/Users/MSI/esp/esp-idf/components/soc/esp32/include -IC:/Users/MSI/esp/esp-idf/components/hal/esp32/include -IC:/Users/MSI/esp/esp-idf/components/hal/include -IC:/Users/MSI/esp/esp-idf/components/esp_rom/include -IC:/Users/MSI/esp/esp-idf/components/esp_rom/esp32 -IC:/Users/MSI/esp/esp-idf/components/esp_rom/include/esp32 -IC:/Users/MSI/esp/esp-idf/components/esp_common/include -IC:/Users/MSI/esp/esp-idf/components/esp_system/include -IC:/Users/MSI/esp/esp-idf/components/esp32/include -IC:/Users/MSI/esp/esp-idf/components/driver/include -IC:/Users/MSI/esp/esp-idf/components/driver/esp32/include -IC:/Users/MSI/esp/esp-idf/components/esp_ringbuf/include -IC:/Users/MSI/esp/esp-idf/components/efuse/include -IC:/Users/MSI/esp/esp-idf/components/efuse/esp32/include -IC:/Users/MSI/esp/esp-idf/components/xtensa/include -IC:/Users/MSI/esp/esp-idf/components/xtensa/esp32/include -IC:/Users/MSI/esp/esp-idf/components/espcoredump/include -IC:/Users/MSI/esp/esp-idf/components/esp_timer/include -IC:/Users/MSI/esp/esp-idf/components/esp_ipc/include -IC:/Users/MSI/esp/esp-idf/components/esp_pm/include -IC:/Users/MSI/esp/esp-idf/components/vfs/include -IC:/Users/MSI/esp/esp-idf/components/esp_wifi/include -IC:/Users/MSI/esp/esp-idf/components/esp_wifi/esp32/include -IC:/Users/MSI/esp/esp-idf/components/esp_event/include -IC:/Users/MSI/esp/esp-idf/components/esp_netif/include -IC:/Users/MSI/esp/esp-idf/components/esp_eth/include -IC:/Users/MSI/esp/esp-idf/components/tcpip_adapter/include -IC:/Users/MSI/esp/esp-idf/components/app_trace/include -IC:/Users/MSI/esp/esp-idf/components/fatfs/diskio -IC:/Users/MSI/esp/esp-idf/components/fatfs/vfs -IC:/Users/MSI/esp/esp-idf/components/fatfs/src -IC:/Users/MSI/esp/esp-idf/components/wear_levelling/include -IC:/Users/MSI/esp/esp-idf/components/spi_flash/include -IC:/Users/MSI/esp/esp-idf/components/sdmmc/include -IC:/Users/MSI/esp/esp-idf/components/spiffs/include -mlongcalls -Wno-frame-address -ffunction-sections -fdata-sections -Wall -Werror=all -Wno-error=unused-function -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wextra -Wno-unused-parameter -Wno-sign-compare -ggdb -Og -fstrict-volatile-bitfields -Wno-error=unused-but-set-variable -std=gnu99 -Wno-old-style-declaration -D_GNU_SOURCE -DIDF_VER=\"v4.3.2-dirty\" -DESP_PLATFORM -MD -MT esp-idf/hardware_driver/CMakeFiles/idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj -MF esp-idf\hardware_driver\CMakeFiles\idf_hardware_driver.dir\boards\esp32-korvo\bsp_board.c.obj.d -o esp-idf/hardware_driver/CMakeFiles/__idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj -c C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/bsp_board.h:35, from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:25: C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/esp32_korvo_v1_1_board.h:103:32: warning: backslash-newline at end of file

define I2S_CONFIG_DEFAULT() { \

C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:226:107: error: unknown type name 'i2s_bits_per_chan_t'; did you mean 'i2s_bits_per_sample_t'? static esp_err_t bsp_i2s_init(i2s_port_t i2s_num, uint32_t sample_rate, i2s_channel_fmt_t channel_format, i2s_bits_per_chan_t bits_per_chan) ^~~~~~~ i2s_bits_per_sample_t C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c: In function 'bsp_board_init': C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:395:5: error: implicit declaration of function 'bsp_i2s_init'; did you mean 'bsp_i2c_init'? [-Werror=implicit-function-declaration] bsp_i2s_init(I2S_NUM_1, 16000, I2S_CHANNEL_FMT_RIGHT_LEFT, I2S_BITS_PER_CHAN_32BIT); ^~~~ bsp_i2c_init C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:395:64: error: 'I2S_BITS_PER_CHAN_32BIT' undeclared (first use in this function); did you mean 'I2S_BITS_PER_SAMPLE_32BIT'? bsp_i2s_init(I2S_NUM_1, 16000, I2S_CHANNEL_FMT_RIGHT_LEFT, I2S_BITS_PER_CHAN_32BIT); ^~~~~~~ I2S_BITS_PER_SAMPLE_32BIT C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:395:64: note: each undeclared identifier is reported only once for each function it appears in cc1.exe: some warnings being treated as errors [970/988] Building C object esp-idf/hardware_driver/CMakeFiles/__idf_hardware_driver.dir/codec/es8311/es8311.c.obj In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/bsp_board.h:35, from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es8311/es8311.c:29: C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/esp32_korvo_v1_1_board.h:103:32: warning: backslash-newline at end of file

define I2S_CONFIG_DEFAULT() { \

[971/988] Building C object esp-idf/hardware_driver/CMakeFiles/__idf_hardware_driver.dir/esp_board_init.c.obj In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/bsp_board.h:35, from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/esp_board_init.c:20: C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/esp32_korvo_v1_1_board.h:103:32: warning: backslash-newline at end of file

define I2S_CONFIG_DEFAULT() { \

C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/esp_board_init.c:26:20: warning: 'TAG' defined but not used [-Wunused-variable] static const char *TAG = "hardware"; ^~~ [972/988] Building C object esp-idf/hardware_driver/CMakeFiles/__idf_hardware_driver.dir/codec/es7210/es7210.c.obj In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/bsp_board.h:35, from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es7210/es7210.c:29: C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/esp32_korvo_v1_1_board.h:103:32: warning: backslash-newline at end of file

define I2S_CONFIG_DEFAULT() { \

[974/988] Building C object esp-idf/hardware_driver/CMakeFiles/__idf_hardware_driver.dir/codec/es8388/es8388.c.obj In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/bsp_board.h:35, from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es8388/es8388.c:29: C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/esp32_korvo_v1_1_board.h:103:32: warning: backslash-newline at end of file

define I2S_CONFIG_DEFAULT() { \

[975/988] Building C object esp-idf/player/CMakeFiles/__idf_player.dir/esp_skainet_player.c.obj In file included from C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/semphr.h:35, from C:/Users/MSI/esp/esp-idf/components/driver/include/driver/i2s.h:20, from C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:8: C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c: In function 'esp_skainet_stream_in_task': C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:93:31: warning: passing argument 1 of 'xQueueGenericSend' from incompatible pointer type [-Wincompatible-pointer-types] xQueueSend(player->player_queue, buffer, portMAX_DELAY); C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:421:80: note: in definition of macro 'xQueueSend'

define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )

                                                                            ^~~~~~


C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:94:31: warning: passing argument 1 of 'xQueueGenericSend' from incompatible pointer type [-Wincompatible-pointer-types]
              xQueueSend(player->player_queue, buffer+player->frame_size, portMAX_DELAY);
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:421:80: note: in definition of macro 'xQueueSend'
 #define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )
                                                                                ^~~~~~
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:572:45: note: expected 'QueueHandle_t' {aka 'struct QueueDefinition *'} but argument is of type 'struct RingBuf *' BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
                               ~~~~~~~~~~~~~~^~~~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:98:30: warning: passing argument 1 of 'xQueueGenericSend' from incompatible pointer type [-Wincompatible-pointer-types]
             xQueueSend(player->player_queue, buffer, portMAX_DELAY);
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:421:80: note: in definition of macro 'xQueueSend'
 #define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )
                                                                                ^~~~~~
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:572:45: note: expected 'QueueHandle_t' {aka 'struct QueueDefinition *'} but argument is of type 'struct RingBuf *' BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
                               ~~~~~~~~~~~~~~^~~~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:37:8: warning: unused variable 'file_name' [-Wunused-variable]
  char *file_name= "/sdcard/1.wav";
        ^~~~~~~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c: In function 'esp_skainet_stream_out_task':
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:141:25: warning: passing argument 1 of 'xQueueReceive' from incompatible pointer type [-Wincompatible-pointer-types]
     xQueueReceive(player->player_queue, buffer, portMAX_DELAY);
                   ~~~~~~^~~~~~~~~~~~~~
In file included from C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/semphr.h:35,
                 from C:/Users/MSI/esp/esp-idf/components/driver/include/driver/i2s.h:20,
                 from C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:8:
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/queue.h:764:41: note: expected 'QueueHandle_t' {aka 'struct QueueDefinition *'} but argument is of type 'struct RingBuf *' BaseType_t xQueueReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
                           ~~~~~~~~~~~~~~^~~~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c: In function 'esp_skainet_player_create':
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:221:22: warning: assignment to 'struct RingBuf *' from incompatible pointer type 'QueueHandle_t' {aka 'struct QueueDefinition *'} [-Wincompatible-pointer-types]
  player->player_queue=xQueueCreate(ringbuf_size/player->frame_size, player->frame_size);
                      ^
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:229:26: warning: passing argument 1 of 'xTaskCreatePinnedToCore' from incompatible pointer type [-Wincompatible-pointer-types]
  xTaskCreatePinnedToCore(&esp_skainet_stream_in_task, "stream_in", 2 * 1024, (void*)player, 5, NULL, core_num);
                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:6:
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/task.h:286:53: note: expected 'TaskFunction_t' {aka 'void (*)(void *)'} but argument is of type 'int (*)(void *)'
  BaseType_t xTaskCreatePinnedToCore( TaskFunction_t pvTaskCode,
                                      ~~~~~~~~~~~~~~~^~~~~~~~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:230:26: warning: passing argument 1 of 'xTaskCreatePinnedToCore' from incompatible pointer type [-Wincompatible-pointer-types]
  xTaskCreatePinnedToCore(&esp_skainet_stream_out_task, "stream_out", 2 * 1024, (void*)player, 5, NULL, core_num);
                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:6:
C:/Users/MSI/esp/esp-idf/components/freertos/include/freertos/task.h:286:53: note: expected 'TaskFunction_t' {aka 'void (*)(void *)'} but argument is of type 'int (*)(void *)'
  BaseType_t xTaskCreatePinnedToCore( TaskFunction_t pvTaskCode,
                                      ~~~~~~~~~~~~~~~^~~~~~~~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c: In function 'esp_skainet_player_play':
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:241:25: warning: passing argument 2 of 'file_list_scan' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
  file_list_scan(player, path);
                         ^~~~
C:/Users/MSI/Desktop/esp-skainet-master/components/player/esp_skainet_player.c:170:40: note: expected 'char *' but argument is of type 'const char *'
 int file_list_scan(void *handle, char *path)
                                  ~~~~~~^~~~
[977/988] Building C object esp-idf/sr_ringbuf/CMakeFiles/__idf_sr_ringbuf.dir/lock.c.obj
ninja: build stopped: subcommand failed.

hi @PandaChen-pro :

通过查看你的log，请问你是否使用的是 make 编译方式？目前 Skainet 只支持 Cmake 编译。
注释掉的函数应该是 bsp_i2s_deinit，不是 bsp_codec_prob.

非常感谢您的回复。我使用的是vscode编译，注释的函数确实是bsp_i2s_deinit

// static esp_err_t bsp_i2s_deinit(i2s_port_t i2s_num) // { // esp_err_t ret_val = ESP_OK;

// ret_val |= i2s_stop(I2S_NUM_0); // ret_val |= i2s_driver_uninstall(i2s_num);

// return ret_val; // }

非常抱歉这么晚打扰您，我进行了很多次其他example案例的编译，同样是报错，发现似乎一直是bsp_board.c文件的问题，请问除了注释bsp_i2s_deinit这个函数外，是否还要进行其他操作。

// static esp_err_t bsp_i2s_deinit(i2s_port_t i2s_num) // { // esp_err_t ret_val = ESP_OK; // ret_val |= i2s_stop(I2S_NUM_0); // ret_val |= i2s_driver_uninstall(i2s_num);

// return ret_val; // }

下面是错误日志：

[2/9] Building C object esp-idf/hardware_driver/CMakeFiles/idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj FAILED: esp-idf/hardware_driver/CMakeFiles/idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj ccache D:\Develop_Tools.espressif\tools\xtensa-esp32-elf\esp-2021r1-8.4.0\xtensa-esp32-elf\bin\xtensa-esp32-elf-gcc.exe -Iconfig -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es7210 -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es8311 -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/codec/es8388 -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/i2c_bus/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include -IC:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/led/include -ID:/Develop_Tools/esp-idf/components/newlib/platform_include -ID:/Develop_Tools/esp-idf/components/freertos/include -ID:/Develop_Tools/esp-idf/components/freertos/port/xtensa/include -ID:/Develop_Tools/esp-idf/components/esp_hw_support/include -ID:/Develop_Tools/esp-idf/components/esp_hw_support/port/esp32/. -ID:/Develop_Tools/esp-idf/components/heap/include -ID:/Develop_Tools/esp-idf/components/log/include -ID:/Develop_Tools/esp-idf/components/lwip/include/apps -ID:/Develop_Tools/esp-idf/components/lwip/include/apps/sntp -ID:/Develop_Tools/esp-idf/components/lwip/lwip/src/include -ID:/Develop_Tools/esp-idf/components/lwip/port/esp32/include -ID:/Develop_Tools/esp-idf/components/lwip/port/esp32/include/arch -ID:/Develop_Tools/esp-idf/components/soc/include -ID:/Develop_Tools/esp-idf/components/soc/esp32/. -ID:/Develop_Tools/esp-idf/components/soc/esp32/include -ID:/Develop_Tools/esp-idf/components/hal/esp32/include -ID:/Develop_Tools/esp-idf/components/hal/include -ID:/Develop_Tools/esp-idf/components/esp_rom/include -ID:/Develop_Tools/esp-idf/components/esp_rom/esp32 -ID:/Develop_Tools/esp-idf/components/esp_rom/include/esp32 -ID:/Develop_Tools/esp-idf/components/esp_common/include -ID:/Develop_Tools/esp-idf/components/esp_system/include -ID:/Develop_Tools/esp-idf/components/esp32/include -ID:/Develop_Tools/esp-idf/components/driver/include -ID:/Develop_Tools/esp-idf/components/driver/esp32/include -ID:/Develop_Tools/esp-idf/components/esp_ringbuf/include -ID:/Develop_Tools/esp-idf/components/efuse/include -ID:/Develop_Tools/esp-idf/components/efuse/esp32/include -ID:/Develop_Tools/esp-idf/components/xtensa/include -ID:/Develop_Tools/esp-idf/components/xtensa/esp32/include -ID:/Develop_Tools/esp-idf/components/espcoredump/include -ID:/Develop_Tools/esp-idf/components/esp_timer/include -ID:/Develop_Tools/esp-idf/components/esp_ipc/include -ID:/Develop_Tools/esp-idf/components/esp_pm/include -ID:/Develop_Tools/esp-idf/components/vfs/include -ID:/Develop_Tools/esp-idf/components/esp_wifi/include -ID:/Develop_Tools/esp-idf/components/esp_wifi/esp32/include -ID:/Develop_Tools/esp-idf/components/esp_event/include -ID:/Develop_Tools/esp-idf/components/esp_netif/include -ID:/Develop_Tools/esp-idf/components/esp_eth/include -ID:/Develop_Tools/esp-idf/components/tcpip_adapter/include -ID:/Develop_Tools/esp-idf/components/app_trace/include -ID:/Develop_Tools/esp-idf/components/fatfs/diskio -ID:/Develop_Tools/esp-idf/components/fatfs/vfs -ID:/Develop_Tools/esp-idf/components/fatfs/src -ID:/Develop_Tools/esp-idf/components/wear_levelling/include -ID:/Develop_Tools/esp-idf/components/spi_flash/include -ID:/Develop_Tools/esp-idf/components/sdmmc/include -ID:/Develop_Tools/esp-idf/components/spiffs/include -mlongcalls -Wno-frame-address -ffunction-sections -fdata-sections -Wall -Werror=all -Wno-error=unused-function -Wno-error=unused-variable -Wno-error=deprecated-declarations -Wextra -Wno-unused-parameter -Wno-sign-compare -ggdb -Og -fstrict-volatile-bitfields -Wno-error=unused-but-set-variable -std=gnu99 -Wno-old-style-declaration -D_GNU_SOURCE -DIDF_VER=\"v4.3.1\" -DESP_PLATFORM -MD -MT esp-idf/hardware_driver/CMakeFiles/idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj -MF esp-idf\hardware_driver\CMakeFiles\idf_hardware_driver.dir\boards\esp32-korvo\bsp_board.c.obj.d -o esp-idf/hardware_driver/CMakeFiles/__idf_hardware_driver.dir/boards/esp32-korvo/bsp_board.c.obj -c C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c In file included from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/bsp_board.h:35, from C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:25: C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/include/esp32_korvo_v1_1_board.h:103:32: warning: backslash-newline at end of file

define I2S_CONFIG_DEFAULT() { \

C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:226:107: error: unknown type name 'i2s_bits_per_chan_t'; did you mean 'i2s_bits_per_sample_t'? static esp_err_t bsp_i2s_init(i2s_port_t i2s_num, uint32_t sample_rate, i2s_channel_fmt_t channel_format, i2s_bits_per_chan_t bits_per_chan) ^~~~~~~ i2s_bits_per_sample_t C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c: In function 'bsp_board_init': C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:395:5: error: implicit declaration of function 'bsp_i2s_init'; did you mean 'bsp_i2c_init'? [-Werror=implicit-function-declaration] bsp_i2s_init(I2S_NUM_1, 16000, I2S_CHANNEL_FMT_RIGHT_LEFT, I2S_BITS_PER_CHAN_32BIT); ^~~~ bsp_i2c_init C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:395:64: error: 'I2S_BITS_PER_CHAN_32BIT' undeclared (first use in this function); did you mean 'I2S_BITS_PER_SAMPLE_32BIT'? bsp_i2s_init(I2S_NUM_1, 16000, I2S_CHANNEL_FMT_RIGHT_LEFT, I2S_BITS_PER_CHAN_32BIT); ^~~~~~~ I2S_BITS_PER_SAMPLE_32BIT C:/Users/MSI/Desktop/esp-skainet-master/components/hardware_driver/boards/esp32-korvo/bsp_board.c:395:64: note: each undeclared identifier is reported only once for each function it appears in cc1.exe: some warnings being treated as errors ninja: build stopped: subcommand failed. ninja failed with exit code 1

@PandaChen-pro 请问你使用的 IDF 版本是多少呀？分支和commit？

@PandaChen-pro 请问你使用的 IDF 版本是多少呀？分支和commit？

目前 Skaient master 分支只支持 IDF release/v4.4 https://github.com/espressif/esp-idf/tree/release/v4.4

目前

@PandaChen-pro 请问你使用的 IDF 版本是多少呀？分支和commit？

目前 Skaient master 分支只支持 IDF release/v4.4 https://github.com/espressif/esp-idf/tree/release/v4.4

目前用的IDF版本是v4.3，是需要进行更新吗

@PandaChen-pro 建议将 IDF 更新到 release/v4.4, 因为 log 中报错的结构体在 4.3 中没有定义，4.4 针对 I2S 进行了接口改动。

@PandaChen-pro 建议将 IDF 更新到 release/v4.4, 因为 log 中报错的结构体在 4.3 中没有定义，4.4 针对 I2S 进行了接口改动。

非常感谢您的帮助，现在已经能够正常编译了，但是在烧录后，一直会重复出现下面的字符串，不能正常工作，请问这应该怎么解决。

ELF file SHA256: 1c17032cd93c17ab

Rebooting... ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0030,len:6724 load:0x40078000,len:14812 xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x40078000: [WinError 2] ????????????????????????????????? load:0x40080400,len:3792 xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x40080400: [WinError 2] ????????????????????????????????? entry 0x40080694 xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x40080694: [WinError 2] ????????????????????????????????? I (27) boot: ESP-IDF v4.4-beta1-2-gdf0929009a 2nd stage bootloader I (27) boot: compile time 17:07:24 I (27) boot: chip revision: 3 I (32) boot_comm: chip revision: 3, min. bootloader chip revision: 0 I (39) boot.esp32: SPI Speed : 40MHz I (43) boot.esp32: SPI Mode : DIO I (48) boot.esp32: SPI Flash Size : 2MB I (52) boot: Enabling RNG early entropy source... I (58) boot: Partition Table: I (61) boot: ## Label Usage Type ST Offset Length I (69) boot: 0 nvs WiFi data 01 02 00009000 00006000 I (76) boot: 1 phy_init RF data 01 01 0000f000 00001000 I (84) boot: 2 factory factory app 00 00 00010000 00100000 I (91) boot: End of partition table I (95) boot_comm: chip revision: 3, min. application chip revision: 0 I (102) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=34f5ch (216924) map I (189) esp_image: segment 1: paddr=00044f84 vaddr=3ffb0000 size=025c0h ( 9664) load I (193) esp_image: segment 2: paddr=0004754c vaddr=40080000 size=08acch ( 35532) load I (210) esp_image: segment 3: paddr=00050020 vaddr=400d0020 size=55f24h (352036) map I (337) esp_image: segment 4: paddr=000a5f4c vaddr=40088acc size=073f8h ( 29688) load I (350) esp_image: segment 5: paddr=000ad34c vaddr=50000000 size=00010h ( 16) load I (358) boot: Loaded app from partition at offset 0x10000 I (358) boot: Disabling RNG early entropy source... I (370) cpu_start: Pro cpu up. I (370) cpu_start: Starting app cpu, entry point is 0x400814d0 xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x400814d0: [WinError 2] ????????????????????????????????? I (357) cpu_start: App cpu up. I (385) cpu_start: Pro cpu start user code I (385) cpu_start: cpu freq: 160000000 I (385) cpu_start: Application information: I (389) cpu_start: Project name: wake_word_detection I (395) cpu_start: App version: v0.3.0-104-gaa4f57e-dirty I (402) cpu_start: Compile time: Jan 14 2022 17:07:06 I (408) cpu_start: ELF file SHA256: 1c17032cd93c17ab... I (414) cpu_start: ESP-IDF: v4.4-beta1-2-gdf0929009a I (420) heap_init: Initializing. RAM available for dynamic allocation: I (427) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM I (433) heap_init: At 3FFB44C8 len 0002BB38 (174 KiB): DRAM I (440) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM I (446) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM I (452) heap_init: At 4008FEC4 len 0001013C (64 KiB): IRAM I (460) spi_flash: detected chip: gd I (463) spi_flash: flash io: dio W (467) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header. I (481) cpu_start: Starting scheduler on PRO CPU. I (0) cpu_start: Starting scheduler on APP CPU. I (493) I2S: DMA Malloc info, datalen=blocksize=1280, dma_buf_count=6 I (503) I2S: I2S1, MCLK output by GPIO0 I (503) I2S: DMA Malloc info, datalen=blocksize=320, dma_buf_count=6 I (513) I2S: I2S0, MCLK output by GPIO0 I (513) board: Detected codec at 0x40. Name : ES7210 I (523) board: Detected codec at 0x18. Name : ES8311 I (533) ES7210: ES7210 in Slave mode I (533) ES7210: Enable ES7210_INPUT_MIC1 I (533) ES7210: Enable ES7210_INPUT_MIC2 I (543) ES7210: Enable ES7210_INPUT_MIC3 I (543) ES7210: Enable ES7210_INPUT_MIC4 I (553) ES7210: The ES7210_CLOCK_OFF_REG01 value before stop is 0 I (563) ES7210: Enable ES7210_INPUT_MIC1 I (563) ES7210: Enable ES7210_INPUT_MIC2 I (563) ES7210: Enable ES7210_INPUT_MIC3 I (573) ES7210: Enable ES7210_INPUT_MIC4 I (583) DRV8311: ES8311 in Slave mode I (593) gpio: GPIO[12]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 Item psram alloc failed. Size: 2068 = 1024 x 2 + 16 + 4 Deprecated Quantized wakeNet5: wakeNet5_v1_hilexin_5_0.95_0.90, mode:0 (Dec 10 2021 20:15:15) 3 Item psram alloc failed. Size: 2068 = 2048 x 1 + 16 + 4 Initial ONE-MIC auido front-end for speech recognition, mode:1, (Dec 10 2021 20:29:24) Guru Meditation Error: Core 0 panic'ed (StoreProhibited). Exception was unhandled.

Core 0 register dump: PC : 0x400d7ba8 PS : 0x00060c30 A0 : 0x800d695c A1 : 0x3ffe3910 xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x400d7ba8: [WinError 2] ????????????????????????????????? A2 : 0x3ffaf3ec A3 : 0x3ffecdb4 A4 : 0x00060021 A5 : 0x00060023 A6 : 0x00000001 A7 : 0x00000001 A8 : 0x00000000 A9 : 0x00000000 A10 : 0x00000000 A11 : 0x00001000 A12 : 0x00000200 A13 : 0x3ffb7510 A14 : 0x00000000 A15 : 0x00001000 SAR : 0x0000001c EXCCAUSE: 0x0000001d EXCVADDR: 0x00000000 LBEG : 0x4000c2e0 LEND : 0x4000c2f6 LCOUNT : 0x00000000 xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x4000c2e0: [WinError 2] ????????????????????????????????? xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x4000c2f6: [WinError 2] ?????????????????????????????????

Backtrace:0x400d7ba5:0x3ffe39100x400d6959:0x3ffe3930 0x4008baad:0x3ffe3950 xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x400d7ba5: [WinError 2] ????????????????????????????????? xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x400d6959: [WinError 2] ????????????????????????????????? xtensa-esp32-elfaddr2line -pfiaC -e c:\users\msi\desktop\esp32\esp-skainet\examples\wake_word_detection\build\wake_word_detection.elf 0x4008baad: [WinError 2] ?????????????????????????????????

接收到的消息如下： [2022-01-14 17:27:01.307]# RECV ASCII> [0;32mI (337) esp_image: segment 4: paddr=000a5f4c vaddr=40088acc size=073f8h ( 29688) load[0m [0;32mI (350) esp_image: segment 5: paddr=000ad34c vaddr=50000000 size=00010h ( 16) load[0m [0;32mI (358) boot: Loaded app from partition at offset 0x10000[0m [0;32mI (358) boot: Disabling RNG early entropy source...[0m [0;32mI (370) cpu_start: Pro cpu up.[0m [0;32mI (370) cpu_start: Starting app cpu, entry point is 0x400814d0[0m [0;32mI (357) cpu_start: App cpu up.[0m [0;32mI (385) cpu_st

@PandaChen-pro 从 log 看，应该是芯片配置问题，请先删掉工程目录下的 build 文件夹，然后拷贝 sdkconfig.defaults.esp32 为 sdkconfig ，再次编译。如仍有问题，麻烦提供你目前工程中使用的 sdkconfig 文件。

@PandaChen-pro 从 log 看，应该是芯片配置问题，请先删掉工程目录下的 build 文件夹，然后拷贝 sdkconfig.defaults.esp32 为 sdkconfig ，再次编译。如仍有问题，麻烦提供你目前工程中使用的 sdkconfig 文件。

非常感谢您的回复，我是用idf.py fullclean命令将build文件夹清楚后，重新编译烧录后仍为这样的错误，使用的sdkconfig如下：

CONFIG_IDF_TARGET="esp32"
CONFIG_IDF_TARGET_ESP32=y
CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
CONFIG_ESPTOOLPY_FLASHSIZE_16MB=y
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_esp32.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_esp32.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y
CONFIG_ESP32_SPIRAM_SUPPORT=y
CONFIG_SPIRAM_SPEED_80M=y
# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set

CONFIG_MODEL_IN_SPIFFS=y
# CONFIG_MODEL_IN_SDCARD is not set
CONFIG_USE_WAKENET=y
CONFIG_SR_WN_MODEL_WN5_QUANT=y
CONFIG_SR_WN_WN5_HILEXIN=y
# CONFIG_USE_MULTINET is not set

很抱歉再次打扰您，现在已经能够正常烧录进行监听了，但是当我说出命令词时，没有反应,我应该怎么调整这个命令词。输出日志如下：

entry 0x400806b4
I (27) boot: ESP-IDF v4.4-beta1-2-gdf0929009a 2nd stage bootloader
I (27) boot: compile time 19:12:18
I (27) boot: chip revision: 3
I (32) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (39) qio_mode: Enabling default flash chip QIO
I (44) boot.esp32: SPI Speed      : 80MHz
I (49) boot.esp32: SPI Mode       : QIO
I (53) boot.esp32: SPI Flash Size : 16MB
I (58) boot: Enabling RNG early entropy source...
I (63) boot: Partition Table:
I (67) boot: ## Label            Usage          Type ST Offset   Length
I (74) boot:  0 factory          factory app      00 00 00010000 00500000
I (82) boot: End of partition table
I (86) boot_comm: chip revision: 3, min. application chip revision: 0
I (93) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=390a4h (233636) map
I (166) esp_image: segment 1: paddr=000490cc vaddr=3ffb0000 size=02afch ( 11004) load
I (169) esp_image: segment 2: paddr=0004bbd0 vaddr=40080000 size=04448h ( 17480) load
I (177) esp_image: segment 3: paddr=00050020 vaddr=400d0020 size=5e790h (386960) map
I (287) esp_image: segment 4: paddr=000ae7b8 vaddr=40084448 size=114e8h ( 70888) load
I (310) esp_image: segment 5: paddr=000bfca8 vaddr=50000000 size=00010h (    16) load
I (320) boot: Loaded app from partition at offset 0x10000
I (321) boot: Disabling RNG early entropy source...
I (332) psram: This chip is ESP32-D0WD
I (333) spiram: Found 64MBit SPI RAM device
I (333) spiram: SPI RAM mode: flash 80m sram 80m
I (338) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (345) cpu_start: Pro cpu up.
I (349) cpu_start: Starting app cpu, entry point is 0x400817ec
0x400817ec: call_start_cpu1 at C:/Users/MSI/Desktop/esp32/esp-skainet/esp-idf/components/esp_system/port/cpu_start.c:156

I (0) cpu_start: App cpu up.
I (851) spiram: SPI SRAM memory test OK
I (859) cpu_start: Pro cpu start user code
I (859) cpu_start: cpu freq: 240000000
I (859) cpu_start: Application information:
I (862) cpu_start: Project name:     wake_word_detection
I (868) cpu_start: App version:      v0.3.0-104-gaa4f57e-dirty
I (874) cpu_start: Compile time:     Jan 14 2022 19:25:15
I (880) cpu_start: ELF file SHA256:  568f2f412c549f60...
I (886) cpu_start: ESP-IDF:          v4.4-beta1-2-gdf0929009a
I (893) heap_init: Initializing. RAM available for dynamic allocation:
I (900) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (906) heap_init: At 3FFB4A50 len 0002B5B0 (173 KiB): DRAM
I (912) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (918) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (925) heap_init: At 40095930 len 0000A6D0 (41 KiB): IRAM
I (931) spiram: Adding pool of 4095K of external SPI memory to heap allocator
I (939) spi_flash: detected chip: gd
I (943) spi_flash: flash io: qio
I (948) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (958) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (968) I2S: DMA Malloc info, datalen=blocksize=1280, dma_buf_count=6
I (978) I2S: I2S1, MCLK output by GPIO0
I (978) I2S: DMA Malloc info, datalen=blocksize=320, dma_buf_count=6
I (988) I2S: I2S0, MCLK output by GPIO0
I (988) board: Detected codec at 0x40. Name : ES7210
I (998) board: Detected codec at 0x18. Name : ES8311
I (998) ES7210: ES7210 in Slave mode
I (1008) ES7210: Enable ES7210_INPUT_MIC1
I (1008) ES7210: Enable ES7210_INPUT_MIC2
I (1018) ES7210: Enable ES7210_INPUT_MIC3
I (1018) ES7210: Enable ES7210_INPUT_MIC4
I (1028) ES7210: The ES7210_CLOCK_OFF_REG01 value before stop is 0
I (1038) ES7210: Enable ES7210_INPUT_MIC1
I (1038) ES7210: Enable ES7210_INPUT_MIC2
I (1038) ES7210: Enable ES7210_INPUT_MIC3
I (1048) ES7210: Enable ES7210_INPUT_MIC4
I (1048) DRV8311: ES8311 in Slave mode
I (1068) gpio: GPIO[12]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
Deprecated Quantized wakeNet5: wakeNet5_v1_hilexin_5_0.95_0.90, mode:0 (Dec 10 2021 20:15:15)
3
Initial ONE-MIC auido front-end for speech recognition, mode:1, (Dec 10 2021 20:29:24)
------------detect start------------
wakeword detected
-----------LISTENING-----------

sdkconfig如下：

#
# Automatically generated file. DO NOT EDIT.
# Espressif IoT Development Framework (ESP-IDF) Project Configuration
#
CONFIG_IDF_CMAKE=y
CONFIG_IDF_TARGET_ARCH_XTENSA=y
CONFIG_IDF_TARGET="esp32"
CONFIG_IDF_TARGET_ESP32=y
CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000

#
# SDK tool configuration
#
CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-"
# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
# end of SDK tool configuration

#
# Build type
#
CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y
# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set
CONFIG_APP_BUILD_GENERATE_BINARIES=y
CONFIG_APP_BUILD_BOOTLOADER=y
CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y
# end of Build type

#
# Application manager
#
CONFIG_APP_COMPILE_TIME_DATE=y
# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set
# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set
# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
# end of Application manager

#
# Bootloader config
#
CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000
CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set
# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
CONFIG_BOOTLOADER_LOG_LEVEL=3
# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set
CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y
# CONFIG_BOOTLOADER_FACTORY_RESET is not set
# CONFIG_BOOTLOADER_APP_TEST is not set
CONFIG_BOOTLOADER_WDT_ENABLE=y
# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set
CONFIG_BOOTLOADER_WDT_TIME_MS=9000
# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set
# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set
CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set
CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y
# end of Bootloader config

#
# Security features
#
# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
# CONFIG_SECURE_BOOT is not set
# CONFIG_SECURE_FLASH_ENC_ENABLED is not set
# end of Security features

#
# Serial flasher config
#
CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
# CONFIG_ESPTOOLPY_NO_STUB is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
CONFIG_ESPTOOLPY_FLASHMODE="dio"
# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
CONFIG_ESPTOOLPY_FLASHFREQ="40m"
# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y
# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
CONFIG_ESPTOOLPY_FLASHSIZE="2MB"
CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
CONFIG_ESPTOOLPY_BEFORE_RESET=y
# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
CONFIG_ESPTOOLPY_BEFORE="default_reset"
CONFIG_ESPTOOLPY_AFTER_RESET=y
# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
CONFIG_ESPTOOLPY_AFTER="hard_reset"
# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
# end of Serial flasher config

#
# Partition Table
#
CONFIG_PARTITION_TABLE_SINGLE_APP=y
# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
# CONFIG_PARTITION_TABLE_TWO_OTA is not set
# CONFIG_PARTITION_TABLE_CUSTOM is not set
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
CONFIG_PARTITION_TABLE_OFFSET=0x8000
CONFIG_PARTITION_TABLE_MD5=y
# end of Partition Table

#
# ESP Speech Recognition
#
CONFIG_USE_WAKENET=y
CONFIG_SR_WN_MODEL_WN5_QUANT=y
CONFIG_SR_WN_WN5_HILEXIN=y
# CONFIG_SR_WN_WN5X2_HILEXIN is not set
# CONFIG_SR_WN_WN5X3_HILEXIN is not set
# CONFIG_SR_WN_WN5_NIHAOXIAOZHI is not set
# CONFIG_SR_WN_WN5X2_NIHAOXIAOZHI is not set
# CONFIG_SR_WN_WN5X3_NIHAOXIAOZHI is not set
# CONFIG_SR_WN_WN5X3_NIHAOXIAOXIN is not set
# CONFIG_SR_WN_WN5_CUSTOMIZED_WORD is not set
CONFIG_USE_MULTINET=y
CONFIG_SR_MN_CHINESE=y
CONFIG_SR_MN_CN_MULTINET2_SINGLE_RECOGNITION=y

#
# Add speech commands
#
CONFIG_CN_SPEECH_COMMAND_ID0="da kai kong tiao"
CONFIG_CN_SPEECH_COMMAND_ID1="guan bi kong tiao"
CONFIG_CN_SPEECH_COMMAND_ID2="zeng da feng su"
CONFIG_CN_SPEECH_COMMAND_ID3="jian xiao feng su"
CONFIG_CN_SPEECH_COMMAND_ID4="sheng gao yi du"
CONFIG_CN_SPEECH_COMMAND_ID5="jiang di yi du"
CONFIG_CN_SPEECH_COMMAND_ID6="zhi re mo shi"
CONFIG_CN_SPEECH_COMMAND_ID7="zhi leng mo shi"
CONFIG_CN_SPEECH_COMMAND_ID8="song feng mo shi"
CONFIG_CN_SPEECH_COMMAND_ID9="jie neng mo shi"
CONFIG_CN_SPEECH_COMMAND_ID10="chu shi mo shi"
CONFIG_CN_SPEECH_COMMAND_ID11="jian kang mo shi"
CONFIG_CN_SPEECH_COMMAND_ID12="shui mian mo shi"
CONFIG_CN_SPEECH_COMMAND_ID13="da kai lan ya"
CONFIG_CN_SPEECH_COMMAND_ID14="guan bi lan ya"
CONFIG_CN_SPEECH_COMMAND_ID15="kai shi bo fang"
CONFIG_CN_SPEECH_COMMAND_ID16="zan ting bo fang"
CONFIG_CN_SPEECH_COMMAND_ID17="ding shi yi xiao shi"
CONFIG_CN_SPEECH_COMMAND_ID18="da kai dian deng"
CONFIG_CN_SPEECH_COMMAND_ID19="guan bi dian deng"
CONFIG_CN_SPEECH_COMMAND_ID20=""
CONFIG_CN_SPEECH_COMMAND_ID21=""
CONFIG_CN_SPEECH_COMMAND_ID22=""
CONFIG_CN_SPEECH_COMMAND_ID23=""
CONFIG_CN_SPEECH_COMMAND_ID24=""
CONFIG_CN_SPEECH_COMMAND_ID25=""
CONFIG_CN_SPEECH_COMMAND_ID26=""
CONFIG_CN_SPEECH_COMMAND_ID27=""
CONFIG_CN_SPEECH_COMMAND_ID28=""
CONFIG_CN_SPEECH_COMMAND_ID29=""
CONFIG_CN_SPEECH_COMMAND_ID30=""
CONFIG_CN_SPEECH_COMMAND_ID31=""
CONFIG_CN_SPEECH_COMMAND_ID32=""
CONFIG_CN_SPEECH_COMMAND_ID33=""
CONFIG_CN_SPEECH_COMMAND_ID34=""
CONFIG_CN_SPEECH_COMMAND_ID35=""
CONFIG_CN_SPEECH_COMMAND_ID36=""
CONFIG_CN_SPEECH_COMMAND_ID37=""
CONFIG_CN_SPEECH_COMMAND_ID38=""
CONFIG_CN_SPEECH_COMMAND_ID39=""
CONFIG_CN_SPEECH_COMMAND_ID40=""
CONFIG_CN_SPEECH_COMMAND_ID41=""
CONFIG_CN_SPEECH_COMMAND_ID42=""
CONFIG_CN_SPEECH_COMMAND_ID43=""
CONFIG_CN_SPEECH_COMMAND_ID44=""
CONFIG_CN_SPEECH_COMMAND_ID45=""
CONFIG_CN_SPEECH_COMMAND_ID46=""
CONFIG_CN_SPEECH_COMMAND_ID47=""
CONFIG_CN_SPEECH_COMMAND_ID48=""
CONFIG_CN_SPEECH_COMMAND_ID49=""
CONFIG_CN_SPEECH_COMMAND_ID50=""
CONFIG_CN_SPEECH_COMMAND_ID51=""
CONFIG_CN_SPEECH_COMMAND_ID52=""
CONFIG_CN_SPEECH_COMMAND_ID53=""
CONFIG_CN_SPEECH_COMMAND_ID54=""
CONFIG_CN_SPEECH_COMMAND_ID55=""
CONFIG_CN_SPEECH_COMMAND_ID56=""
CONFIG_CN_SPEECH_COMMAND_ID57=""
CONFIG_CN_SPEECH_COMMAND_ID58=""
CONFIG_CN_SPEECH_COMMAND_ID59=""
CONFIG_CN_SPEECH_COMMAND_ID60=""
CONFIG_CN_SPEECH_COMMAND_ID61=""
CONFIG_CN_SPEECH_COMMAND_ID62=""
CONFIG_CN_SPEECH_COMMAND_ID63=""
CONFIG_CN_SPEECH_COMMAND_ID64=""
CONFIG_CN_SPEECH_COMMAND_ID65=""
CONFIG_CN_SPEECH_COMMAND_ID66=""
CONFIG_CN_SPEECH_COMMAND_ID67=""
CONFIG_CN_SPEECH_COMMAND_ID68=""
CONFIG_CN_SPEECH_COMMAND_ID69=""
CONFIG_CN_SPEECH_COMMAND_ID70=""
CONFIG_CN_SPEECH_COMMAND_ID71=""
CONFIG_CN_SPEECH_COMMAND_ID72=""
CONFIG_CN_SPEECH_COMMAND_ID73=""
CONFIG_CN_SPEECH_COMMAND_ID74=""
CONFIG_CN_SPEECH_COMMAND_ID75=""
CONFIG_CN_SPEECH_COMMAND_ID76=""
CONFIG_CN_SPEECH_COMMAND_ID77=""
CONFIG_CN_SPEECH_COMMAND_ID78=""
CONFIG_CN_SPEECH_COMMAND_ID79=""
CONFIG_CN_SPEECH_COMMAND_ID80=""
CONFIG_CN_SPEECH_COMMAND_ID81=""
CONFIG_CN_SPEECH_COMMAND_ID82=""
CONFIG_CN_SPEECH_COMMAND_ID83=""
CONFIG_CN_SPEECH_COMMAND_ID84=""
CONFIG_CN_SPEECH_COMMAND_ID85=""
CONFIG_CN_SPEECH_COMMAND_ID86=""
CONFIG_CN_SPEECH_COMMAND_ID87=""
CONFIG_CN_SPEECH_COMMAND_ID88=""
CONFIG_CN_SPEECH_COMMAND_ID89=""
CONFIG_CN_SPEECH_COMMAND_ID90=""
CONFIG_CN_SPEECH_COMMAND_ID91=""
CONFIG_CN_SPEECH_COMMAND_ID92=""
CONFIG_CN_SPEECH_COMMAND_ID93=""
CONFIG_CN_SPEECH_COMMAND_ID94=""
CONFIG_CN_SPEECH_COMMAND_ID95=""
CONFIG_CN_SPEECH_COMMAND_ID96=""
CONFIG_CN_SPEECH_COMMAND_ID97=""
CONFIG_CN_SPEECH_COMMAND_ID98=""
CONFIG_CN_SPEECH_COMMAND_ID99=""
CONFIG_CN_SPEECH_COMMAND_ID100=""
CONFIG_CN_SPEECH_COMMAND_ID101=""
CONFIG_CN_SPEECH_COMMAND_ID102=""
CONFIG_CN_SPEECH_COMMAND_ID103=""
CONFIG_CN_SPEECH_COMMAND_ID104=""
CONFIG_CN_SPEECH_COMMAND_ID105=""
CONFIG_CN_SPEECH_COMMAND_ID106=""
CONFIG_CN_SPEECH_COMMAND_ID107=""
CONFIG_CN_SPEECH_COMMAND_ID108=""
CONFIG_CN_SPEECH_COMMAND_ID109=""
CONFIG_CN_SPEECH_COMMAND_ID110=""
CONFIG_CN_SPEECH_COMMAND_ID111=""
CONFIG_CN_SPEECH_COMMAND_ID112=""
CONFIG_CN_SPEECH_COMMAND_ID113=""
CONFIG_CN_SPEECH_COMMAND_ID114=""
CONFIG_CN_SPEECH_COMMAND_ID115=""
CONFIG_CN_SPEECH_COMMAND_ID116=""
CONFIG_CN_SPEECH_COMMAND_ID117=""
CONFIG_CN_SPEECH_COMMAND_ID118=""
CONFIG_CN_SPEECH_COMMAND_ID119=""
CONFIG_CN_SPEECH_COMMAND_ID120=""
CONFIG_CN_SPEECH_COMMAND_ID121=""
CONFIG_CN_SPEECH_COMMAND_ID122=""
CONFIG_CN_SPEECH_COMMAND_ID123=""
CONFIG_CN_SPEECH_COMMAND_ID124=""
CONFIG_CN_SPEECH_COMMAND_ID125=""
CONFIG_CN_SPEECH_COMMAND_ID126=""
CONFIG_CN_SPEECH_COMMAND_ID127=""
CONFIG_CN_SPEECH_COMMAND_ID128=""
CONFIG_CN_SPEECH_COMMAND_ID129=""
CONFIG_CN_SPEECH_COMMAND_ID130=""
CONFIG_CN_SPEECH_COMMAND_ID131=""
CONFIG_CN_SPEECH_COMMAND_ID132=""
CONFIG_CN_SPEECH_COMMAND_ID133=""
CONFIG_CN_SPEECH_COMMAND_ID134=""
CONFIG_CN_SPEECH_COMMAND_ID135=""
CONFIG_CN_SPEECH_COMMAND_ID136=""
CONFIG_CN_SPEECH_COMMAND_ID137=""
CONFIG_CN_SPEECH_COMMAND_ID138=""
CONFIG_CN_SPEECH_COMMAND_ID139=""
CONFIG_CN_SPEECH_COMMAND_ID140=""
CONFIG_CN_SPEECH_COMMAND_ID141=""
CONFIG_CN_SPEECH_COMMAND_ID142=""
CONFIG_CN_SPEECH_COMMAND_ID143=""
CONFIG_CN_SPEECH_COMMAND_ID144=""
CONFIG_CN_SPEECH_COMMAND_ID145=""
CONFIG_CN_SPEECH_COMMAND_ID146=""
CONFIG_CN_SPEECH_COMMAND_ID147=""
CONFIG_CN_SPEECH_COMMAND_ID148=""
CONFIG_CN_SPEECH_COMMAND_ID149=""
CONFIG_CN_SPEECH_COMMAND_ID150=""
CONFIG_CN_SPEECH_COMMAND_ID151=""
CONFIG_CN_SPEECH_COMMAND_ID152=""
CONFIG_CN_SPEECH_COMMAND_ID153=""
CONFIG_CN_SPEECH_COMMAND_ID154=""
CONFIG_CN_SPEECH_COMMAND_ID155=""
CONFIG_CN_SPEECH_COMMAND_ID156=""
CONFIG_CN_SPEECH_COMMAND_ID157=""
CONFIG_CN_SPEECH_COMMAND_ID158=""
CONFIG_CN_SPEECH_COMMAND_ID159=""
CONFIG_CN_SPEECH_COMMAND_ID160=""
CONFIG_CN_SPEECH_COMMAND_ID161=""
CONFIG_CN_SPEECH_COMMAND_ID162=""
CONFIG_CN_SPEECH_COMMAND_ID163=""
CONFIG_CN_SPEECH_COMMAND_ID164=""
CONFIG_CN_SPEECH_COMMAND_ID165=""
CONFIG_CN_SPEECH_COMMAND_ID166=""
CONFIG_CN_SPEECH_COMMAND_ID167=""
CONFIG_CN_SPEECH_COMMAND_ID168=""
CONFIG_CN_SPEECH_COMMAND_ID169=""
CONFIG_CN_SPEECH_COMMAND_ID170=""
CONFIG_CN_SPEECH_COMMAND_ID171=""
CONFIG_CN_SPEECH_COMMAND_ID172=""
CONFIG_CN_SPEECH_COMMAND_ID173=""
CONFIG_CN_SPEECH_COMMAND_ID174=""
CONFIG_CN_SPEECH_COMMAND_ID175=""
CONFIG_CN_SPEECH_COMMAND_ID176=""
CONFIG_CN_SPEECH_COMMAND_ID177=""
CONFIG_CN_SPEECH_COMMAND_ID178=""
CONFIG_CN_SPEECH_COMMAND_ID179=""
CONFIG_CN_SPEECH_COMMAND_ID180=""
CONFIG_CN_SPEECH_COMMAND_ID181=""
CONFIG_CN_SPEECH_COMMAND_ID182=""
CONFIG_CN_SPEECH_COMMAND_ID183=""
CONFIG_CN_SPEECH_COMMAND_ID184=""
CONFIG_CN_SPEECH_COMMAND_ID185=""
CONFIG_CN_SPEECH_COMMAND_ID186=""
CONFIG_CN_SPEECH_COMMAND_ID187=""
CONFIG_CN_SPEECH_COMMAND_ID188=""
CONFIG_CN_SPEECH_COMMAND_ID189=""
CONFIG_CN_SPEECH_COMMAND_ID190=""
CONFIG_CN_SPEECH_COMMAND_ID191=""
CONFIG_CN_SPEECH_COMMAND_ID192=""
CONFIG_CN_SPEECH_COMMAND_ID193=""
CONFIG_CN_SPEECH_COMMAND_ID194=""
CONFIG_CN_SPEECH_COMMAND_ID195=""
CONFIG_CN_SPEECH_COMMAND_ID196=""
CONFIG_CN_SPEECH_COMMAND_ID197=""
CONFIG_CN_SPEECH_COMMAND_ID198=""
CONFIG_CN_SPEECH_COMMAND_ID199=""
# end of Add speech commands
# end of ESP Speech Recognition

#
# Audio Media HAL
#
CONFIG_ESP32_KORVO_V1_1_BOARD=y
# end of Audio Media HAL

#
# Compiler options
#
CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y
# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set
# CONFIG_COMPILER_OPTIMIZATION_PERF is not set
# CONFIG_COMPILER_OPTIMIZATION_NONE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
CONFIG_COMPILER_HIDE_PATHS_MACROS=y
# CONFIG_COMPILER_CXX_EXCEPTIONS is not set
# CONFIG_COMPILER_CXX_RTTI is not set
CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set
# CONFIG_COMPILER_DUMP_RTL_FILES is not set
# end of Compiler options

#
# Component config
#

#
# Application Level Tracing
#
# CONFIG_APPTRACE_DEST_JTAG is not set
CONFIG_APPTRACE_DEST_NONE=y
CONFIG_APPTRACE_LOCK_ENABLE=y
# end of Application Level Tracing

#
# ESP-ASIO
#
# CONFIG_ASIO_SSL_SUPPORT is not set
# end of ESP-ASIO

#
# Bluetooth
#
# CONFIG_BT_ENABLED is not set
# end of Bluetooth

#
# CoAP Configuration
#
CONFIG_COAP_MBEDTLS_PSK=y
# CONFIG_COAP_MBEDTLS_PKI is not set
# CONFIG_COAP_MBEDTLS_DEBUG is not set
CONFIG_COAP_LOG_DEFAULT_LEVEL=0
# end of CoAP Configuration

#
# Driver configurations
#

#
# ADC configuration
#
# CONFIG_ADC_FORCE_XPD_FSM is not set
CONFIG_ADC_DISABLE_DAC=y
# end of ADC configuration

#
# MCPWM configuration
#
# CONFIG_MCPWM_ISR_IN_IRAM is not set
# end of MCPWM configuration

#
# SPI configuration
#
# CONFIG_SPI_MASTER_IN_IRAM is not set
CONFIG_SPI_MASTER_ISR_IN_IRAM=y
# CONFIG_SPI_SLAVE_IN_IRAM is not set
CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
# end of SPI configuration

#
# TWAI configuration
#
# CONFIG_TWAI_ISR_IN_IRAM is not set
# CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC is not set
# CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST is not set
# CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID is not set
# CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT is not set
# end of TWAI configuration

#
# UART configuration
#
# CONFIG_UART_ISR_IN_IRAM is not set
# end of UART configuration

#
# RTCIO configuration
#
# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set
# end of RTCIO configuration

#
# GPIO Configuration
#
# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
# end of GPIO Configuration
# end of Driver configurations

#
# eFuse Bit Manager
#
# CONFIG_EFUSE_CUSTOM_TABLE is not set
# CONFIG_EFUSE_VIRTUAL is not set
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
CONFIG_EFUSE_MAX_BLK_LEN=192
# end of eFuse Bit Manager

#
# ESP-TLS
#
CONFIG_ESP_TLS_USING_MBEDTLS=y
# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
# CONFIG_ESP_TLS_SERVER is not set
# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set
# CONFIG_ESP_TLS_PSK_VERIFICATION is not set
# CONFIG_ESP_TLS_INSECURE is not set
# end of ESP-TLS

#
# ESP32-specific
#
CONFIG_ESP32_REV_MIN_0=y
# CONFIG_ESP32_REV_MIN_1 is not set
# CONFIG_ESP32_REV_MIN_2 is not set
# CONFIG_ESP32_REV_MIN_3 is not set
CONFIG_ESP32_REV_MIN=0
CONFIG_ESP32_DPORT_WORKAROUND=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y
# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set
CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160
# CONFIG_ESP32_SPIRAM_SUPPORT is not set
# CONFIG_ESP32_TRAX is not set
CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_ESP32_ULP_COPROC_ENABLED is not set
CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0
CONFIG_ESP32_DEBUG_OCDAWARE=y
CONFIG_ESP32_BROWNOUT_DET=y
CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_ESP32_BROWNOUT_DET_LVL=0
CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set
# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set
CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y
# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set
# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set
# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set
CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000
CONFIG_ESP32_XTAL_FREQ_40=y
# CONFIG_ESP32_XTAL_FREQ_26 is not set
# CONFIG_ESP32_XTAL_FREQ_AUTO is not set
CONFIG_ESP32_XTAL_FREQ=40
# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_ESP32_NO_BLOBS is not set
# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set
# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set
CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5
# end of ESP32-specific

#
# ADC-Calibration
#
CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
CONFIG_ADC_CAL_LUT_ENABLE=y
# end of ADC-Calibration

#
# Common ESP-related
#
CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
# end of Common ESP-related

#
# Ethernet
#
CONFIG_ETH_ENABLED=y
CONFIG_ETH_USE_ESP32_EMAC=y
CONFIG_ETH_PHY_INTERFACE_RMII=y
CONFIG_ETH_RMII_CLK_INPUT=y
# CONFIG_ETH_RMII_CLK_OUTPUT is not set
CONFIG_ETH_RMII_CLK_IN_GPIO=0
CONFIG_ETH_DMA_BUFFER_SIZE=512
CONFIG_ETH_DMA_RX_BUFFER_NUM=10
CONFIG_ETH_DMA_TX_BUFFER_NUM=10
CONFIG_ETH_USE_SPI_ETHERNET=y
# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set
# CONFIG_ETH_SPI_ETHERNET_W5500 is not set
# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set
# CONFIG_ETH_USE_OPENETH is not set
# end of Ethernet

#
# Event Loop Library
#
# CONFIG_ESP_EVENT_LOOP_PROFILING is not set
CONFIG_ESP_EVENT_POST_FROM_ISR=y
CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y
# end of Event Loop Library

#
# GDB Stub
#
# end of GDB Stub

#
# ESP HTTP client
#
CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y
# end of ESP HTTP client

#
# HTTP Server
#
CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
CONFIG_HTTPD_MAX_URI_LEN=512
CONFIG_HTTPD_ERR_RESP_NO_DELAY=y
CONFIG_HTTPD_PURGE_BUF_LEN=32
# CONFIG_HTTPD_LOG_PURGE_DATA is not set
# CONFIG_HTTPD_WS_SUPPORT is not set
# end of HTTP Server

#
# ESP HTTPS OTA
#
# CONFIG_OTA_ALLOW_HTTP is not set
# end of ESP HTTPS OTA

#
# ESP HTTPS server
#
# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
# end of ESP HTTPS server

#
# Hardware Settings
#

#
# MAC Config
#
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y
CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4
# end of MAC Config

#
# Sleep Config
#
CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y
CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y
# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set
# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set
# end of Sleep Config
# end of Hardware Settings

#
# IPC (Inter-Processor Call)
#
CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y
CONFIG_ESP_IPC_ISR_ENABLE=y
# end of IPC (Inter-Processor Call)

#
# LCD and Touch Panel
#

#
# LCD Peripheral Configuration
#
CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32
# end of LCD Peripheral Configuration
# end of LCD and Touch Panel

#
# ESP NETIF Adapter
#
CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
CONFIG_ESP_NETIF_TCPIP_LWIP=y
# CONFIG_ESP_NETIF_LOOPBACK is not set
CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y
# end of ESP NETIF Adapter

#
# PHY
#
CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP_PHY_MAX_TX_POWER=20
CONFIG_ESP_PHY_REDUCE_TX_POWER=y
# end of PHY

#
# Power Management
#
# CONFIG_PM_ENABLE is not set
# end of Power Management

#
# ESP System Settings
#
# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set
CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y
# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set
# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set

#
# Memory protection
#
# end of Memory protection

CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584
CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y
# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set
# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_ESP_MAIN_TASK_AFFINITY=0x0
CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_NONE is not set
CONFIG_ESP_CONSOLE_UART=y
CONFIG_ESP_CONSOLE_MULTIPLE_UART=y
CONFIG_ESP_CONSOLE_UART_NUM=0
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_ESP_INT_WDT=y
CONFIG_ESP_INT_WDT_TIMEOUT_MS=300
CONFIG_ESP_INT_WDT_CHECK_CPU1=y
CONFIG_ESP_TASK_WDT=y
# CONFIG_ESP_TASK_WDT_PANIC is not set
CONFIG_ESP_TASK_WDT_TIMEOUT_S=5
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
# CONFIG_ESP_PANIC_HANDLER_IRAM is not set
# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y
# end of ESP System Settings

#
# High resolution timer (esp_timer)
#
# CONFIG_ESP_TIMER_PROFILING is not set
CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y
CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y
CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584
CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1
# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set
# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
# end of High resolution timer (esp_timer)

#
# Wi-Fi
#
CONFIG_ESP32_WIFI_ENABLED=y
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y
CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1
CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32
# CONFIG_ESP32_WIFI_CSI_ENABLED is not set
CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
CONFIG_ESP32_WIFI_TX_BA_WIN=6
CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
CONFIG_ESP32_WIFI_RX_BA_WIN=6
CONFIG_ESP32_WIFI_NVS_ENABLED=y
CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752
CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32
CONFIG_ESP32_WIFI_IRAM_OPT=y
CONFIG_ESP32_WIFI_RX_IRAM_OPT=y
CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y
# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set
# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set
# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set
# end of Wi-Fi

#
# Core dump
#
# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set
# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set
CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y
# end of Core dump

#
# FAT Filesystem support
#
# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set
CONFIG_FATFS_CODEPAGE_437=y
# CONFIG_FATFS_CODEPAGE_720 is not set
# CONFIG_FATFS_CODEPAGE_737 is not set
# CONFIG_FATFS_CODEPAGE_771 is not set
# CONFIG_FATFS_CODEPAGE_775 is not set
# CONFIG_FATFS_CODEPAGE_850 is not set
# CONFIG_FATFS_CODEPAGE_852 is not set
# CONFIG_FATFS_CODEPAGE_855 is not set
# CONFIG_FATFS_CODEPAGE_857 is not set
# CONFIG_FATFS_CODEPAGE_860 is not set
# CONFIG_FATFS_CODEPAGE_861 is not set
# CONFIG_FATFS_CODEPAGE_862 is not set
# CONFIG_FATFS_CODEPAGE_863 is not set
# CONFIG_FATFS_CODEPAGE_864 is not set
# CONFIG_FATFS_CODEPAGE_865 is not set
# CONFIG_FATFS_CODEPAGE_866 is not set
# CONFIG_FATFS_CODEPAGE_869 is not set
# CONFIG_FATFS_CODEPAGE_932 is not set
# CONFIG_FATFS_CODEPAGE_936 is not set
# CONFIG_FATFS_CODEPAGE_949 is not set
# CONFIG_FATFS_CODEPAGE_950 is not set
CONFIG_FATFS_CODEPAGE=437
CONFIG_FATFS_LFN_NONE=y
# CONFIG_FATFS_LFN_HEAP is not set
# CONFIG_FATFS_LFN_STACK is not set
CONFIG_FATFS_FS_LOCK=0
CONFIG_FATFS_TIMEOUT_MS=10000
CONFIG_FATFS_PER_FILE_CACHE=y
# CONFIG_FATFS_USE_FASTSEEK is not set
# end of FAT Filesystem support

#
# Modbus configuration
#
CONFIG_FMB_COMM_MODE_TCP_EN=y
CONFIG_FMB_TCP_PORT_DEFAULT=502
CONFIG_FMB_TCP_PORT_MAX_CONN=5
CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20
CONFIG_FMB_COMM_MODE_RTU_EN=y
CONFIG_FMB_COMM_MODE_ASCII_EN=y
CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200
CONFIG_FMB_QUEUE_LENGTH=20
CONFIG_FMB_PORT_TASK_STACK_SIZE=4096
CONFIG_FMB_SERIAL_BUF_SIZE=256
CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8
CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000
CONFIG_FMB_PORT_TASK_PRIO=10
# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y
# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set
CONFIG_FMB_PORT_TASK_AFFINITY=0x0
CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_FMB_CONTROLLER_STACK_SIZE=4096
CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20
# CONFIG_FMB_TIMER_PORT_ENABLED is not set
CONFIG_FMB_TIMER_GROUP=0
CONFIG_FMB_TIMER_INDEX=0
CONFIG_FMB_MASTER_TIMER_GROUP=0
CONFIG_FMB_MASTER_TIMER_INDEX=0
# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set
# end of Modbus configuration

#
# FreeRTOS
#
# CONFIG_FREERTOS_UNICORE is not set
CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y
CONFIG_FREERTOS_CORETIMER_0=y
# CONFIG_FREERTOS_CORETIMER_1 is not set
CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y
CONFIG_FREERTOS_HZ=100
CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set
# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set
CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y
# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set
CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1
CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y
# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set
# CONFIG_FREERTOS_ASSERT_DISABLE is not set
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
CONFIG_FREERTOS_ISR_STACKSIZE=1536
# CONFIG_FREERTOS_LEGACY_HOOKS is not set
CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set
CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1
CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048
CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10
CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0
# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set
# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set
CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y
CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set
CONFIG_FREERTOS_DEBUG_OCDAWARE=y
# CONFIG_FREERTOS_FPU_IN_ISR is not set
CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y
# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set
# end of FreeRTOS

#
# Hardware Abstraction Layer (HAL) and Low Level (LL)
#
CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y
# CONFIG_HAL_ASSERTION_DISABLE is not set
# CONFIG_HAL_ASSERTION_SILIENT is not set
# CONFIG_HAL_ASSERTION_ENABLE is not set
CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
# end of Hardware Abstraction Layer (HAL) and Low Level (LL)

#
# Heap memory debugging
#
CONFIG_HEAP_POISONING_DISABLED=y
# CONFIG_HEAP_POISONING_LIGHT is not set
# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set
CONFIG_HEAP_TRACING_OFF=y
# CONFIG_HEAP_TRACING_STANDALONE is not set
# CONFIG_HEAP_TRACING_TOHOST is not set
# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set
# end of Heap memory debugging

#
# jsmn
#
# CONFIG_JSMN_PARENT_LINKS is not set
# CONFIG_JSMN_STRICT is not set
# end of jsmn

#
# libsodium
#
# end of libsodium

#
# Log output
#
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set
# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set
CONFIG_LOG_DEFAULT_LEVEL=3
CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set
CONFIG_LOG_MAXIMUM_LEVEL=3
CONFIG_LOG_COLORS=y
CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
# end of Log output

#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif"
# CONFIG_LWIP_NETIF_API is not set
# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set
CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y
# CONFIG_LWIP_L2_TO_L3_COPY is not set
# CONFIG_LWIP_IRAM_OPTIMIZATION is not set
CONFIG_LWIP_TIMERS_ONDEMAND=y
CONFIG_LWIP_MAX_SOCKETS=10
# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set
# CONFIG_LWIP_SO_LINGER is not set
CONFIG_LWIP_SO_REUSE=y
CONFIG_LWIP_SO_REUSE_RXTOALL=y
# CONFIG_LWIP_SO_RCVBUF is not set
# CONFIG_LWIP_NETBUF_RECVINFO is not set
CONFIG_LWIP_IP4_FRAG=y
CONFIG_LWIP_IP6_FRAG=y
# CONFIG_LWIP_IP4_REASSEMBLY is not set
# CONFIG_LWIP_IP6_REASSEMBLY is not set
# CONFIG_LWIP_IP_FORWARD is not set
# CONFIG_LWIP_STATS is not set
# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set
CONFIG_LWIP_ESP_GRATUITOUS_ARP=y
CONFIG_LWIP_GARP_TMR_INTERVAL=60
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
CONFIG_LWIP_DHCP_OPTIONS_LEN=68

#
# DHCP server
#
CONFIG_LWIP_DHCPS=y
CONFIG_LWIP_DHCPS_LEASE_UNIT=60
CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
# end of DHCP server

# CONFIG_LWIP_AUTOIP is not set
CONFIG_LWIP_IPV6=y
# CONFIG_LWIP_IPV6_AUTOCONFIG is not set
CONFIG_LWIP_IPV6_NUM_ADDRESSES=3
# CONFIG_LWIP_IPV6_FORWARD is not set
# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=y
CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8

#
# TCP
#
CONFIG_LWIP_MAX_ACTIVE_TCP=16
CONFIG_LWIP_MAX_LISTENING_TCP=16
CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y
CONFIG_LWIP_TCP_MAXRTX=12
CONFIG_LWIP_TCP_SYNMAXRTX=12
CONFIG_LWIP_TCP_MSS=1440
CONFIG_LWIP_TCP_TMR_INTERVAL=250
CONFIG_LWIP_TCP_MSL=60000
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
CONFIG_LWIP_TCP_WND_DEFAULT=5744
CONFIG_LWIP_TCP_RECVMBOX_SIZE=6
CONFIG_LWIP_TCP_QUEUE_OOSEQ=y
# CONFIG_LWIP_TCP_SACK_OUT is not set
# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_LWIP_TCP_OVERSIZE_MSS=y
# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set
CONFIG_LWIP_TCP_RTO_TIME=1500
# end of TCP

#
# UDP
#
CONFIG_LWIP_MAX_UDP_PCBS=16
CONFIG_LWIP_UDP_RECVMBOX_SIZE=6
# end of UDP

#
# Checksums
#
# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set
# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set
CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y
# end of Checksums

CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072
CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_LWIP_PPP_SUPPORT is not set
CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
# CONFIG_LWIP_SLIP_SUPPORT is not set

#
# ICMP
#
CONFIG_LWIP_ICMP=y
# CONFIG_LWIP_MULTICAST_PING is not set
# CONFIG_LWIP_BROADCAST_PING is not set
# end of ICMP

#
# LWIP RAW API
#
CONFIG_LWIP_MAX_RAW_PCBS=16
# end of LWIP RAW API

#
# SNTP
#
CONFIG_LWIP_SNTP_MAX_SERVERS=1
# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set
CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000
# end of SNTP

CONFIG_LWIP_ESP_LWIP_ASSERT=y

#
# Hooks
#
# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set
CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y
# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set
CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y
# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set
# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set
CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y
# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set
# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set
CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set
# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set
# end of Hooks

# CONFIG_LWIP_DEBUG is not set
# end of LWIP

#
# mbedTLS
#
CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y
# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set
# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set
CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y
CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384
CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set
# CONFIG_MBEDTLS_DEBUG is not set

#
# Certificate Bundle
#
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set
# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set
# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set
# end of Certificate Bundle

# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set
# CONFIG_MBEDTLS_CMAC_C is not set
CONFIG_MBEDTLS_HARDWARE_AES=y
CONFIG_MBEDTLS_HARDWARE_MPI=y
CONFIG_MBEDTLS_HARDWARE_SHA=y
CONFIG_MBEDTLS_ROM_MD5=y
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set
# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set
CONFIG_MBEDTLS_HAVE_TIME=y
# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
CONFIG_MBEDTLS_SHA512_C=y
CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set
# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set
# CONFIG_MBEDTLS_TLS_DISABLED is not set
CONFIG_MBEDTLS_TLS_SERVER=y
CONFIG_MBEDTLS_TLS_CLIENT=y
CONFIG_MBEDTLS_TLS_ENABLED=y

#
# TLS Key Exchange Methods
#
# CONFIG_MBEDTLS_PSK_MODES is not set
CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y
CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y
# end of TLS Key Exchange Methods

CONFIG_MBEDTLS_SSL_RENEGOTIATION=y
# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set
CONFIG_MBEDTLS_SSL_PROTO_TLS1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y
CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y
# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set
# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set
CONFIG_MBEDTLS_SSL_ALPN=y
CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y
CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y
CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y
CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y

#
# Symmetric Ciphers
#
CONFIG_MBEDTLS_AES_C=y
# CONFIG_MBEDTLS_CAMELLIA_C is not set
# CONFIG_MBEDTLS_DES_C is not set
CONFIG_MBEDTLS_RC4_DISABLED=y
# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set
# CONFIG_MBEDTLS_RC4_ENABLED is not set
# CONFIG_MBEDTLS_BLOWFISH_C is not set
# CONFIG_MBEDTLS_XTEA_C is not set
CONFIG_MBEDTLS_CCM_C=y
CONFIG_MBEDTLS_GCM_C=y
# CONFIG_MBEDTLS_NIST_KW_C is not set
# end of Symmetric Ciphers

# CONFIG_MBEDTLS_RIPEMD160_C is not set

#
# Certificates
#
CONFIG_MBEDTLS_PEM_PARSE_C=y
CONFIG_MBEDTLS_PEM_WRITE_C=y
CONFIG_MBEDTLS_X509_CRL_PARSE_C=y
CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
# end of Certificates

CONFIG_MBEDTLS_ECP_C=y
CONFIG_MBEDTLS_ECDH_C=y
CONFIG_MBEDTLS_ECDSA_C=y
# CONFIG_MBEDTLS_ECJPAKE_C is not set
CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y
CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
# CONFIG_MBEDTLS_POLY1305_C is not set
# CONFIG_MBEDTLS_CHACHA20_C is not set
# CONFIG_MBEDTLS_HKDF_C is not set
# CONFIG_MBEDTLS_THREADING_C is not set
# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set
# CONFIG_MBEDTLS_SECURITY_RISKS is not set
# end of mbedTLS

#
# mDNS
#
CONFIG_MDNS_MAX_SERVICES=10
CONFIG_MDNS_TASK_PRIORITY=1
CONFIG_MDNS_TASK_STACK_SIZE=4096
# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set
CONFIG_MDNS_TASK_AFFINITY_CPU0=y
# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
CONFIG_MDNS_TASK_AFFINITY=0x0
CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
# CONFIG_MDNS_STRICT_MODE is not set
CONFIG_MDNS_TIMER_PERIOD_MS=100
# CONFIG_MDNS_NETWORKING_SOCKET is not set
CONFIG_MDNS_MULTIPLE_INSTANCE=y
# end of mDNS

#
# ESP-MQTT Configurations
#
CONFIG_MQTT_PROTOCOL_311=y
CONFIG_MQTT_TRANSPORT_SSL=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET=y
CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y
# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set
# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set
# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set
# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set
# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set
# CONFIG_MQTT_CUSTOM_OUTBOX is not set
# end of ESP-MQTT Configurations

#
# Newlib
#
CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set
# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set
# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set
CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y
# CONFIG_NEWLIB_NANO_FORMAT is not set
# end of Newlib

#
# NVS
#
# end of NVS

#
# OpenSSL
#
# CONFIG_OPENSSL_DEBUG is not set
CONFIG_OPENSSL_ERROR_STACK=y
# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set
CONFIG_OPENSSL_ASSERT_EXIT=y
# end of OpenSSL

#
# OpenThread
#
# CONFIG_OPENTHREAD_ENABLED is not set
# end of OpenThread

#
# PThreads
#
CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_PTHREAD_STACK_MIN=768
CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y
# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set
# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set
CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread"
# end of PThreads

#
# SPI Flash driver
#
# CONFIG_SPI_FLASH_VERIFY_WRITE is not set
# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set
CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y
CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set
# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set
# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set
# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set
# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set
CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y
CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20
CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1
CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192
# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set
# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set
# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set

#
# Auto-detect flash chips
#
CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y
CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y
# end of Auto-detect flash chips

CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y
# end of SPI Flash driver

#
# SPIFFS Configuration
#
CONFIG_SPIFFS_MAX_PARTITIONS=3

#
# SPIFFS Cache Configuration
#
CONFIG_SPIFFS_CACHE=y
CONFIG_SPIFFS_CACHE_WR=y
# CONFIG_SPIFFS_CACHE_STATS is not set
# end of SPIFFS Cache Configuration

CONFIG_SPIFFS_PAGE_CHECK=y
CONFIG_SPIFFS_GC_MAX_RUNS=10
# CONFIG_SPIFFS_GC_STATS is not set
CONFIG_SPIFFS_PAGE_SIZE=256
CONFIG_SPIFFS_OBJ_NAME_LEN=32
# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set
CONFIG_SPIFFS_USE_MAGIC=y
CONFIG_SPIFFS_USE_MAGIC_LENGTH=y
CONFIG_SPIFFS_META_LENGTH=4
CONFIG_SPIFFS_USE_MTIME=y

#
# Debug Configuration
#
# CONFIG_SPIFFS_DBG is not set
# CONFIG_SPIFFS_API_DBG is not set
# CONFIG_SPIFFS_GC_DBG is not set
# CONFIG_SPIFFS_CACHE_DBG is not set
# CONFIG_SPIFFS_CHECK_DBG is not set
# CONFIG_SPIFFS_TEST_VISUALISATION is not set
# end of Debug Configuration
# end of SPIFFS Configuration

#
# TCP Transport
#

#
# Websocket
#
CONFIG_WS_TRANSPORT=y
CONFIG_WS_BUFFER_SIZE=1024
# end of Websocket
# end of TCP Transport

#
# Unity unit testing library
#
CONFIG_UNITY_ENABLE_FLOAT=y
CONFIG_UNITY_ENABLE_DOUBLE=y
# CONFIG_UNITY_ENABLE_64BIT is not set
# CONFIG_UNITY_ENABLE_COLOR is not set
CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y
# CONFIG_UNITY_ENABLE_FIXTURE is not set
# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set
# end of Unity unit testing library

#
# Virtual file system
#
CONFIG_VFS_SUPPORT_IO=y
CONFIG_VFS_SUPPORT_DIR=y
CONFIG_VFS_SUPPORT_SELECT=y
CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_VFS_SUPPORT_TERMIOS=y

#
# Host File System I/O (Semihosting)
#
CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# end of Host File System I/O (Semihosting)
# end of Virtual file system

#
# Wear Levelling
#
# CONFIG_WL_SECTOR_SIZE_512 is not set
CONFIG_WL_SECTOR_SIZE_4096=y
CONFIG_WL_SECTOR_SIZE=4096
# end of Wear Levelling

#
# Wi-Fi Provisioning Manager
#
CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
# end of Wi-Fi Provisioning Manager

#
# Supplicant
#
CONFIG_WPA_MBEDTLS_CRYPTO=y
# CONFIG_WPA_WAPI_PSK is not set
# CONFIG_WPA_SUITE_B_192 is not set
# CONFIG_WPA_DEBUG_PRINT is not set
# CONFIG_WPA_TESTING_OPTIONS is not set
# CONFIG_WPA_WPS_STRICT is not set
# CONFIG_WPA_11KV_SUPPORT is not set
# end of Supplicant
# end of Component config

#
# Compatibility options
#
# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set
# end of Compatibility options

# Deprecated options for backward compatibility
CONFIG_TOOLPREFIX="xtensa-esp32-elf-"
# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set
CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set
# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set
CONFIG_LOG_BOOTLOADER_LEVEL=3
# CONFIG_APP_ROLLBACK_ENABLE is not set
# CONFIG_FLASH_ENCRYPTION_ENABLED is not set
# CONFIG_FLASHMODE_QIO is not set
# CONFIG_FLASHMODE_QOUT is not set
CONFIG_FLASHMODE_DIO=y
# CONFIG_FLASHMODE_DOUT is not set
# CONFIG_MONITOR_BAUD_9600B is not set
# CONFIG_MONITOR_BAUD_57600B is not set
CONFIG_MONITOR_BAUD_115200B=y
# CONFIG_MONITOR_BAUD_230400B is not set
# CONFIG_MONITOR_BAUD_921600B is not set
# CONFIG_MONITOR_BAUD_2MB is not set
# CONFIG_MONITOR_BAUD_OTHER is not set
CONFIG_MONITOR_BAUD_OTHER_VAL=115200
CONFIG_MONITOR_BAUD=115200
CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y
# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set
CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set
CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
# CONFIG_CXX_EXCEPTIONS is not set
CONFIG_STACK_CHECK_NONE=y
# CONFIG_STACK_CHECK_NORM is not set
# CONFIG_STACK_CHECK_STRONG is not set
# CONFIG_STACK_CHECK_ALL is not set
# CONFIG_WARN_WRITE_STRINGS is not set
# CONFIG_DISABLE_GCC8_WARNINGS is not set
# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
CONFIG_ESP32_APPTRACE_DEST_NONE=y
CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
CONFIG_ADC2_DISABLE_DAC=y
# CONFIG_SPIRAM_SUPPORT is not set
CONFIG_TRACEMEM_RESERVE_DRAM=0x0
# CONFIG_ULP_COPROC_ENABLED is not set
CONFIG_ULP_COPROC_RESERVE_MEM=0
CONFIG_BROWNOUT_DET=y
CONFIG_BROWNOUT_DET_LVL_SEL_0=y
# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
CONFIG_BROWNOUT_DET_LVL=0
CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set
# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set
# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
# CONFIG_NO_BLOBS is not set
# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
# CONFIG_EVENT_LOOP_PROFILING is not set
CONFIG_POST_EVENTS_FROM_ISR=y
CONFIG_POST_EVENTS_FROM_IRAM_ISR=y
# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
CONFIG_ESP_SYSTEM_PD_FLASH=y
# CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND is not set
CONFIG_IPC_TASK_STACK_SIZE=1024
CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y
# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set
CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20
CONFIG_ESP32_PHY_MAX_TX_POWER=20
CONFIG_ESP32_REDUCE_PHY_TX_POWER=y
# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set
CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y
# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
# CONFIG_ESP32S2_PANIC_GDBSTUB is not set
CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32
CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304
CONFIG_MAIN_TASK_STACK_SIZE=3584
CONFIG_CONSOLE_UART_DEFAULT=y
# CONFIG_CONSOLE_UART_CUSTOM is not set
# CONFIG_ESP_CONSOLE_UART_NONE is not set
CONFIG_CONSOLE_UART=y
CONFIG_CONSOLE_UART_NUM=0
CONFIG_CONSOLE_UART_BAUDRATE=115200
CONFIG_INT_WDT=y
CONFIG_INT_WDT_TIMEOUT_MS=300
CONFIG_INT_WDT_CHECK_CPU1=y
CONFIG_TASK_WDT=y
# CONFIG_TASK_WDT_PANIC is not set
CONFIG_TASK_WDT_TIMEOUT_S=5
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y
CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
CONFIG_TIMER_TASK_STACK_SIZE=3584
# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y
CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150
CONFIG_MB_MASTER_DELAY_MS_CONVERT=200
CONFIG_MB_QUEUE_LENGTH=20
CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096
CONFIG_MB_SERIAL_BUF_SIZE=256
CONFIG_MB_SERIAL_TASK_PRIO=10
CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y
CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233
CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20
CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20
CONFIG_MB_CONTROLLER_STACK_SIZE=4096
CONFIG_MB_EVENT_QUEUE_TIMEOUT=20
# CONFIG_MB_TIMER_PORT_ENABLED is not set
CONFIG_MB_TIMER_GROUP=0
CONFIG_MB_TIMER_INDEX=0
# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
CONFIG_TIMER_TASK_PRIORITY=1
CONFIG_TIMER_TASK_STACK_DEPTH=2048
CONFIG_TIMER_QUEUE_LENGTH=10
# CONFIG_L2_TO_L3_COPY is not set
# CONFIG_USE_ONLY_LWIP_SELECT is not set
CONFIG_ESP_GRATUITOUS_ARP=y
CONFIG_GARP_TMR_INTERVAL=60
CONFIG_TCPIP_RECVMBOX_SIZE=32
CONFIG_TCP_MAXRTX=12
CONFIG_TCP_SYNMAXRTX=12
CONFIG_TCP_MSS=1440
CONFIG_TCP_MSL=60000
CONFIG_TCP_SND_BUF_DEFAULT=5744
CONFIG_TCP_WND_DEFAULT=5744
CONFIG_TCP_RECVMBOX_SIZE=6
CONFIG_TCP_QUEUE_OOSEQ=y
# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set
CONFIG_TCP_OVERSIZE_MSS=y
# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set
# CONFIG_TCP_OVERSIZE_DISABLE is not set
CONFIG_UDP_RECVMBOX_SIZE=6
CONFIG_TCPIP_TASK_STACK_SIZE=3072
CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set
# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set
CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF
# CONFIG_PPP_SUPPORT is not set
CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5
CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072
CONFIG_ESP32_PTHREAD_STACK_MIN=768
CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set
# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set
CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1
CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread"
CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set
# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set
CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y
CONFIG_SUPPORT_TERMIOS=y
CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1
CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128
# End of deprecated options

@PandaChen-pro 你目前使用的这个 demo 是针对唤醒词的，只会运行唤醒词，如果需要使用唤醒词+命令词，请使用 cn_speech_commands_recognition 这个 demo

好的，谢谢您，目前已经跑通三个官方Demo了

espressif / esp-skainet

关于编译wake_word_detection程序的问题 (AIS-801) #42

define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )

define I2S_CONFIG_DEFAULT() { \

define I2S_CONFIG_DEFAULT() { \

define I2S_CONFIG_DEFAULT() { \

define I2S_CONFIG_DEFAULT() { \

define I2S_CONFIG_DEFAULT() { \

define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK )

define I2S_CONFIG_DEFAULT() { \