Hi Guys So I have just purchased a AI THINKER ESP32 CAM, with the OV6240 sensor, the thing is that the first time I set the code, the camera worked and it detected my face, but after I disconnected everything for that night, and powered everything up on the next day, the camera worked and the webserver worked just fine, however no face detection worked, and no Green box or Red box appeared on my face,however I noticed this on the serial output, is there any recommendation on what I should do?
Hi Guys So I have just purchased a AI THINKER ESP32 CAM, with the OV6240 sensor, the thing is that the first time I set the code, the camera worked and it detected my face, but after I disconnected everything for that night, and powered everything up on the next day, the camera worked and the webserver worked just fine, however no face detection worked, and no Green box or Red box appeared on my face,however I noticed this on the serial output, is there any recommendation on what I should do?
_MJPG: 10400B 250ms (4.0fps), AVG: 289ms (3.5fps), 140+95+0+0=235 0 dl_matrix3dqq_fc_with_bias, value > DL_QTP_MAX dl_matrix3dqq_fc_with_bias, value < DL_QTPMIN MJPG: 9243B 287ms (3.5fps), AVG: 290ms (3.4fps), 138+129+0+0=268 0 MJPG: 8002B 288ms (3.5fps), AVG: 290ms (3.4fps), 134+137+0+0=272 0 MJPG: 6905B 227ms (4.4fps), AVG: 287ms (3.5fps), 132+81+0+0=214 0 MJPG: 6922B 198ms (5.1fps), AVG: 284ms (3.5fps), 132+53+0+0=186 0 MJPG: 6827B 208ms (4.8fps), AVG: 281ms (3.6fps), 132+66+0+0=198 0 MJPG: 8000B 229ms (4.4fps), AVG: 279ms (3.6fps), 133+76+0+0=210 0 MJPG: 9246B 222ms (4.5fps), AVG: 277ms (3.6fps), 137+65+0+0=203 0 MJPG: 9742B 219ms (4.6fps), AVG: 273ms (3.7fps), 137+68+0+0=206 0