XiaochaoGONG
commented
5 years ago Hi, please refer to the latest version and don't forget submodules and have a try. Could you provide some logs when it was crashing ?
Closed miisky closed 5 years ago
XiaochaoGONG
commented
5 years ago Hi, please refer to the latest version and don't forget submodules and have a try. Could you provide some logs when it was crashing ?
Hello, I was testing the ESP EYE board for facial recognition. After activating it using voice command "Hi Lexin" and connecting my system to the on board wifi I can view the feed from the camera at 192.168.4.1/facial_recognition. Its fine upto this point as specified in the instructions and works. But then after displaying the feed for a minute or so the feed hangs and the white led switched off and red led switches on and the board starts heating up majorly. When i am lucky sometimes it doesnt hang right away and I pressed the tactile switch once in the hope to get a recognition. Once I press the tactile switch both the red led and white led are on for sometime. Then the white led switches off leaving only the red led on and it hangs and starts heating up like in the previous case. Also, I flashed the ble_adv code onto the board. The ble advertises from the esp eye. But if i try to connect it to my phone it does not connect. Is there something I am doing wrong or is the board defective. I am not able to get clarity. Any assistance would be appreciated.
Thanks and regards