hardtime pairing esp32c6 and esp32h2 to hubitat (IDFGH-13158) (TZ-973)

mukeshbauskar commented 1 week ago

[X] I have read the documentation ESP-IDF Programming Guide and the issue is not addressed there.
[X] I have updated my IDF branch (master or release) to the latest version and checked that the issue is present there.
[X] I have searched the issue tracker for a similar issue and not found a similar issue.

I am trying to pair esp32 dev kit to my hubitat using zigbee. I am trying to flash the devkit with this example.

I tried devkit with c6 and h2 controllers and also hubitat c7 and c8 as well.

Please let me know what logs do you need and how to gather it to help me out.

blaubaer commented 1 week ago

~Sounds similar to #375~

In the current case it seems to always not work, in my mentioned case it does at least work if they're very close.

mukeshbauskar commented 1 week ago

@blaubaer I do not think they are similar. In my case, the hub and the devkit are literally 5cm apart.

And here are logs from the monitor. zigbee_logs.txt

blaubaer commented 1 week ago

Ok. You're right. If they are that close to each other, it sounds differently.

mukeshbauskar commented 1 week ago

Here logs with zigbee debugging turned on. zigbee_debug_logs.txt

This might be caused because of error ZBOSS: mac/mac.c:1039 Oops - error beacon payload is too small buf_sz 15 - drop it

espressif / esp-zigbee-sdk