Open ljm996054544 opened 3 hours ago
The idf5.1.0 previously installed on another computer was able to burn the same S3 development board normally. Now I have tried installing multiple versions of idf, but none of them can burn this ESP32S3 development board Use https://web.esphome.io/ and flash_rownload_tool_3.9.7.exe tool can burn, which should indicate that my hardware is functioning properly
Operating System
win Vscode+IDF_V5.1.4
Esptool Version
v4.7.0
Python Version
Python 3.11.2
Chip Description
ESP32S3
Device Description
No response
Hardware Configuration
nothing
How is Esptool Run
win Vscode+IDF
Full Esptool Command Line that Was Run
d:\APP\Espressif\idf_510\idf_tools\python_env\idf5.1_py3.11_env\Scripts\python.exe d:\APP\Espressif\idf_510\v5.1\esp-idf\components\esptool_py\esptool\esptool.py -p COM18 -b 460800 --before default_reset --after hard_reset --chip esp32s3 write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 bootloader/bootloader.bin 0x10000 simple_ota.bin 0x8000 partition_table/partition-table.bin 0xd000 ota_data_initial.bin
Esptool Output
More Information
Burning ESP32c3 is normal, but ESP32s3 cannot be burned. I will merge the three generated bin files and download them using the esphome tool( https://web.esphome.io/ )It can be downloaded normally and the chip is running normally
Other Steps to Reproduce
No response
I Have Read the Troubleshooting Guide