search

espressif / openocd-esp32

OpenOCD branch with ESP32 JTAG support
Other
358 stars 131 forks source link

❌ Error: Failed to get flash size! (OCD-546) #215

Closed florenso closed 2 years ago

florenso commented 2 years ago

OpenOCD version

v0.11.0-esp32-20211220

Operating System

Windows

Using an IDE ?

vscode

OpenOCD command line

flashing with jtag

ESP-IDF version

V4.4

Problem Description

I have my jtag debugger working with the blink example. but when my device is flashed with my own project, i get strange errors. in my_project i use BLE with nimble.

  1. flash blink project with uart (works)
  2. flash blink project with jtag (works)
  3. flash my_project with jtag (works)
  4. flash my_project with jtag (error)
  5. flash blink project with jtag (error)

(Before I switch between projects I stop OpenOCD.)

Debug Logs

Open On-Chip Debugger  v0.11.0-esp32-20211220 (2021-12-20-15:43)
Licensed under GNU GPL v2
For bug reports, read
    http://openocd.org/doc/doxygen/bugs.html
debug_level: 2

adapter speed: 20000 kHz

Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
❌ Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling"
Info : clock speed 20000 kHz
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
Info : starting gdb server for esp32.cpu0 on 3333
Info : Listening on port 3333 for gdb connections
Info : accepting 'tcl' connection on tcp/6666
Info : dropped 'tcl' connection
Info : accepting 'tcl' connection on tcp/6666
Flashing d:/ontwikkeling/esp32/ble_gateway/build/partition_table/partition-table.bin at 0x8000
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1)
Info : esp32.cpu0: Target halted, PC=0x4011D8F2, debug_reason=00000000
Info : Set GDB target to 'esp32.cpu0'
Info : esp32.cpu1: Target halted, PC=0x4011D8F2, debug_reason=00000000
Info : esp32.cpu0: Debug controller was reset.
Info : esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000
Info : esp32.cpu0: Core was reset.
Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu1: Debug controller was reset.
Info : esp32.cpu1: Core was reset.
Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000
Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001
Warn : Empty flash mapping!
Warn : Failed to get flash mappings (0)!
Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001
❌ Error: Failed to get flash size!
Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001
❌ Error: Failed to get flash size!
Error: Failed t❌ o probe flash, size 0 KB
Error: auto_probe failed
Error: Failed to find bank 'esp32.cpu0.flash'!
** Flashing Failed **
-1

Expected behavior

i expect flashing with jtag should always work, no matter what program is loaded into the eps.

Screenshots

No response

florenso commented 2 years ago

verbose log:

User : 14 3 options.c:63 configuration_output_handler(): debug_level: 3 User : 15 3 options.c:63 configuration_output_handler(): Debug: 16 3 options.c:244 add_default_dirs(): bindir=/builds/idf/openocd-esp32/_build/../openocd-esp32/bin Debug: 17 3 options.c:245 add_default_dirs(): pkgdatadir=/builds/idf/openocd-esp32/_build/../openocd-esp32/share/openocd Debug: 18 3 options.c:246 add_default_dirs(): exepath=D:/Espressif/tools/openocd-esp32/v0.11.0-esp32-20211220/openocd-esp32/bin Debug: 19 3 options.c:247 add_default_dirs(): bin2data=../share/openocd Debug: 20 3 configuration.c:42 add_script_search_dir(): adding D:\Espressif\tools\openocd-esp32\v0.11.0-esp32-20211220/openocd-esp32/share/openocd/scripts Debug: 21 6 configuration.c:42 add_script_search_dir(): adding C:/Users/koen/AppData/Roaming/OpenOCD Debug: 22 6 configuration.c:42 add_script_search_dir(): adding D:/Espressif/tools/openocd-esp32/v0.11.0-esp32-20211220/openocd-esp32/bin/../share/openocd/site Debug: 23 6 configuration.c:42 add_script_search_dir(): adding D:/Espressif/tools/openocd-esp32/v0.11.0-esp32-20211220/openocd-esp32/bin/../share/openocd/scripts Debug: 24 6 configuration.c:97 find_file(): found D:\Espressif\tools\openocd-esp32\v0.11.0-esp32-20211220/openocd-esp32/share/openocd/scripts/board/esp32-wrover-kit-3.3v.cfg Debug: 25 8 configuration.c:97 find_file(): found D:\Espressif\tools\openocd-esp32\v0.11.0-esp32-20211220/openocd-esp32/share/openocd/scripts/interface/ftdi/esp32_devkitj_v1.cfg Debug: 26 8 command.c:146 script_debug(): command - adapter driver ftdi Debug: 28 8 command.c:146 script_debug(): command - ftdi_vid_pid 0x0403 0x6010 0x0403 0x6014 Debug: 30 8 command.c:146 script_debug(): command - ftdi_channel 0 Debug: 32 8 command.c:146 script_debug(): command - ftdi_layout_init 0x0008 0xf00b Debug: 34 8 command.c:146 script_debug(): command - ftdi_layout_signal LED -data 0x1000 Debug: 36 8 command.c:146 script_debug(): command - ftdi_layout_signal LED2 -data 0x2000 Debug: 38 8 command.c:146 script_debug(): command - ftdi_layout_signal LED3 -data 0x4000 Debug: 40 8 command.c:146 script_debug(): command - ftdi_layout_signal LED4 -data 0x8000 Debug: 42 8 command.c:146 script_debug(): command - reset_config none Debug: 44 8 command.c:146 script_debug(): command - adapter speed 20000 Debug: 46 8 core.c:1822 jtag_config_khz(): handle jtag khz Debug: 47 8 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value Debug: 48 8 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value Debug: 49 8 configuration.c:97 find_file(): found D:\Espressif\tools\openocd-esp32\v0.11.0-esp32-20211220/openocd-esp32/share/openocd/scripts/target/esp32.cfg Debug: 50 8 command.c:146 script_debug(): command - transport select jtag Debug: 51 9 configuration.c:97 find_file(): found D:\Espressif\tools\openocd-esp32\v0.11.0-esp32-20211220/openocd-esp32/share/openocd/scripts/target/esp_common.cfg Debug: 52 9 command.c:146 script_debug(): command - add_help_text program_esp write an image to flash, address is only required for binary images. verify, reset, exit, compress, restore_clock are optional Debug: 54 9 command.c:1115 help_add_command(): added 'program_esp' help text Debug: 55 9 command.c:146 script_debug(): command - add_usage_text program_esp [address] [verify] [reset] [exit] [compress] [restore_clock] Debug: 57 9 command.c:1141 help_add_command(): added 'program_esp' usage text Debug: 58 9 command.c:146 script_debug(): command - add_help_text program_esp_bins write all the images at address specified in flasher_args.json generated while building idf project Debug: 60 9 command.c:1115 help_add_command(): added 'program_esp_bins' help text Debug: 61 9 command.c:146 script_debug(): command - add_usage_text program_esp_bins flasher_args.json [verify] [reset] [exit] [compress] [restore_clock] Debug: 63 9 command.c:1141 help_add_command(): added 'program_esp_bins' usage text Debug: 64 9 command.c:146 script_debug(): command - add_help_text esp_get_mac Print MAC address of the chip. Use a format argument to return formatted MAC value Debug: 66 9 command.c:1115 help_add_command(): added 'esp_get_mac' help text Debug: 67 9 command.c:146 script_debug(): command - add_usage_text esp_get_mac [format] Debug: 69 9 command.c:1141 help_add_command(): added 'esp_get_mac' usage text Debug: 70 9 command.c:146 script_debug(): command - jtag newtap esp32 cpu0 -irlen 5 -expected-id 0x120034e5 Debug: 71 9 tcl.c:572 jim_newtap_cmd(): Creating New Tap, Chip: esp32, Tap: cpu0, Dotted: esp32.cpu0, 4 params Debug: 72 9 tcl.c:596 jim_newtap_cmd(): Processing option: -irlen Debug: 73 9 tcl.c:596 jim_newtap_cmd(): Processing option: -expected-id Debug: 74 9 core.c:1488 jtag_tap_init(): Created Tap: esp32.cpu0 @ abs position 0, irlen 5, capture: 0x1 mask: 0x3 Debug: 75 9 command.c:146 script_debug(): command - jtag newtap esp32 cpu1 -irlen 5 -expected-id 0x120034e5 Debug: 76 9 tcl.c:572 jim_newtap_cmd(): Creating New Tap, Chip: esp32, Tap: cpu1, Dotted: esp32.cpu1, 4 params Debug: 77 9 tcl.c:596 jim_newtap_cmd(): Processing option: -irlen Debug: 78 9 tcl.c:596 jim_newtap_cmd(): Processing option: -expected-id Debug: 79 9 core.c:1488 jtag_tap_init(): Created Tap: esp32.cpu1 @ abs position 1, irlen 5, capture: 0x1 mask: 0x3 Debug: 80 9 command.c:146 script_debug(): command - target create esp32.cpu0 esp32 -endian little -chain-position esp32.cpu0 -coreid 0 -rtos FreeRTOS Debug: 81 9 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 82 9 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 83 9 FreeRTOS.c:1242 FreeRTOS_create(): FreeRTOS_create Debug: 84 9 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 85 9 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 86 9 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 87 9 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 88 9 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 89 9 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 90 9 command.c:376 register_command(): command 'flashbootstrap' is already registered in 'esp32' context Debug: 91 9 command.c:376 register_command(): command 'esp' is already registered in 'esp32.cpu0' context Debug: 92 9 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu0' context Debug: 93 9 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu0' context Debug: 94 9 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu0' context Debug: 95 9 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu0' context Debug: 96 9 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu0' context Debug: 97 9 command.c:376 register_command(): command 'flashbootstrap' is already registered in 'esp32' context Debug: 98 9 command.c:146 script_debug(): command - esp32.cpu0 configure -work-area-phys 0x40090000 -work-area-virt 0x40090000 -work-area-size 0x4000 -work-area-backup 1 Debug: 99 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 100 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 101 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 102 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 103 10 command.c:146 script_debug(): command - esp32.cpu0 configure -alt-work-area-phys 0x3FFC0000 -alt-work-area-virt 0x3FFC0000 -alt-work-area-size 0x18000 -alt-work-area-backup 1 Debug: 104 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 105 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 106 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 107 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 108 10 command.c:146 script_debug(): command - flash bank esp32.cpu0.flash esp32 0x0 0 0 0 esp32.cpu0 Debug: 110 10 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 111 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 112 10 tcl.c:1319 handle_flash_bank_command(): 'esp32' driver usage field missing Debug: 113 10 command.c:146 script_debug(): command - flash bank esp32.cpu0.irom esp32 0x0 0 0 0 esp32.cpu0 Debug: 115 10 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 116 10 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp' context Debug: 117 10 command.c:376 register_command(): command 'compression' is already registered in 'esp' context Debug: 118 10 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp' context Debug: 119 10 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp' context Debug: 120 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 121 10 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp32' context Debug: 122 10 command.c:376 register_command(): command 'compression' is already registered in 'esp32' context Debug: 123 10 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp32' context Debug: 124 10 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp32' context Debug: 125 10 tcl.c:1319 handle_flash_bank_command(): 'esp32' driver usage field missing Debug: 126 10 command.c:146 script_debug(): command - flash bank esp32.cpu0.drom esp32 0x0 0 0 0 esp32.cpu0 Debug: 128 10 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 129 10 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp' context Debug: 130 10 command.c:376 register_command(): command 'compression' is already registered in 'esp' context Debug: 131 10 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp' context Debug: 132 10 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp' context Debug: 133 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 134 10 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp32' context Debug: 135 10 command.c:376 register_command(): command 'compression' is already registered in 'esp32' context Debug: 136 10 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp32' context Debug: 137 10 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp32' context Debug: 138 10 tcl.c:1319 handle_flash_bank_command(): 'esp32' driver usage field missing Debug: 139 10 command.c:146 script_debug(): command - target create esp32.cpu1 esp32 -endian little -chain-position esp32.cpu1 -coreid 1 -rtos FreeRTOS Debug: 140 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 141 10 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 142 10 FreeRTOS.c:1242 FreeRTOS_create(): FreeRTOS_create Debug: 143 10 command.c:376 register_command(): command 'xtensa' is already registered in '' context Debug: 144 10 command.c:376 register_command(): command 'set_permissive' is already registered in 'xtensa' context Debug: 145 10 command.c:376 register_command(): command 'maskisr' is already registered in 'xtensa' context Debug: 146 10 command.c:376 register_command(): command 'smpbreak' is already registered in 'xtensa' context Debug: 147 10 command.c:376 register_command(): command 'perfmon_enable' is already registered in 'xtensa' context Debug: 148 10 command.c:376 register_command(): command 'perfmon_dump' is already registered in 'xtensa' context Debug: 149 10 command.c:376 register_command(): command 'tracestart' is already registered in 'xtensa' context Debug: 150 10 command.c:376 register_command(): command 'tracestop' is already registered in 'xtensa' context Debug: 151 10 command.c:376 register_command(): command 'tracedump' is already registered in 'xtensa' context Debug: 152 10 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 153 10 command.c:376 register_command(): command 'semihost_basedir' is already registered in 'esp' context Debug: 154 10 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 155 10 command.c:376 register_command(): command 'apptrace' is already registered in 'esp' context Debug: 156 10 command.c:376 register_command(): command 'sysview' is already registered in 'esp' context Debug: 157 10 command.c:376 register_command(): command 'sysview_mcore' is already registered in 'esp' context Debug: 158 10 command.c:376 register_command(): command 'gcov' is already registered in 'esp' context Debug: 159 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 160 10 command.c:376 register_command(): command 'smp' is already registered in 'esp32' context Debug: 161 10 command.c:376 register_command(): command 'smp_on' is already registered in 'esp32' context Debug: 162 10 command.c:376 register_command(): command 'smp_off' is already registered in 'esp32' context Debug: 163 10 command.c:376 register_command(): command 'smp_gdb' is already registered in 'esp32' context Debug: 164 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 165 10 command.c:376 register_command(): command 'flashbootstrap' is already registered in 'esp32' context Debug: 166 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 167 10 command.c:376 register_command(): command 'set_permissive' is already registered in 'esp32' context Debug: 168 10 command.c:376 register_command(): command 'maskisr' is already registered in 'esp32' context Debug: 169 10 command.c:376 register_command(): command 'smpbreak' is already registered in 'esp32' context Debug: 170 10 command.c:376 register_command(): command 'perfmon_enable' is already registered in 'esp32' context Debug: 171 10 command.c:376 register_command(): command 'perfmon_dump' is already registered in 'esp32' context Debug: 172 10 command.c:376 register_command(): command 'tracestart' is already registered in 'esp32' context Debug: 173 10 command.c:376 register_command(): command 'tracestop' is already registered in 'esp32' context Debug: 174 10 command.c:376 register_command(): command 'tracedump' is already registered in 'esp32' context Debug: 175 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 176 10 command.c:376 register_command(): command 'semihost_basedir' is already registered in 'esp32' context Debug: 177 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 178 10 command.c:376 register_command(): command 'apptrace' is already registered in 'esp32' context Debug: 179 10 command.c:376 register_command(): command 'sysview' is already registered in 'esp32' context Debug: 180 10 command.c:376 register_command(): command 'sysview_mcore' is already registered in 'esp32' context Debug: 181 10 command.c:376 register_command(): command 'gcov' is already registered in 'esp32' context Debug: 182 10 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 183 10 command.c:376 register_command(): command 'flashbootstrap' is already registered in 'esp32' context Debug: 184 11 command.c:376 register_command(): command 'esp' is already registered in 'esp32.cpu1' context Debug: 185 11 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu1' context Debug: 186 11 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu1' context Debug: 187 11 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu1' context Debug: 188 11 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu1' context Debug: 189 11 command.c:376 register_command(): command 'esp32' is already registered in 'esp32.cpu1' context Debug: 190 11 command.c:376 register_command(): command 'flashbootstrap' is already registered in 'esp32' context Debug: 191 11 command.c:146 script_debug(): command - flash bank esp32.cpu1.flash esp32 0x0 0 0 0 esp32.cpu1 Debug: 193 11 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 194 11 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp' context Debug: 195 11 command.c:376 register_command(): command 'compression' is already registered in 'esp' context Debug: 196 11 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp' context Debug: 197 11 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp' context Debug: 198 11 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 199 11 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp32' context Debug: 200 11 command.c:376 register_command(): command 'compression' is already registered in 'esp32' context Debug: 201 11 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp32' context Debug: 202 11 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp32' context Debug: 203 11 tcl.c:1319 handle_flash_bank_command(): 'esp32' driver usage field missing Debug: 204 11 command.c:146 script_debug(): command - flash bank esp32.cpu1.irom esp32 0x0 0 0 0 esp32.cpu1 Debug: 206 11 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 207 11 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp' context Debug: 208 11 command.c:376 register_command(): command 'compression' is already registered in 'esp' context Debug: 209 11 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp' context Debug: 210 11 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp' context Debug: 211 11 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 212 11 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp32' context Debug: 213 11 command.c:376 register_command(): command 'compression' is already registered in 'esp32' context Debug: 214 11 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp32' context Debug: 215 11 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp32' context Debug: 216 11 tcl.c:1319 handle_flash_bank_command(): 'esp32' driver usage field missing Debug: 217 11 command.c:146 script_debug(): command - flash bank esp32.cpu1.drom esp32 0x0 0 0 0 esp32.cpu1 Debug: 219 11 command.c:376 register_command(): command 'esp' is already registered in '' context Debug: 220 11 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp' context Debug: 221 11 command.c:376 register_command(): command 'compression' is already registered in 'esp' context Debug: 222 11 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp' context Debug: 223 11 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp' context Debug: 224 11 command.c:376 register_command(): command 'esp32' is already registered in '' context Debug: 225 11 command.c:376 register_command(): command 'appimage_offset' is already registered in 'esp32' context Debug: 226 11 command.c:376 register_command(): command 'compression' is already registered in 'esp32' context Debug: 227 11 command.c:376 register_command(): command 'verify_bank_hash' is already registered in 'esp32' context Debug: 228 11 command.c:376 register_command(): command 'flash_stub_clock_boost' is already registered in 'esp32' context Debug: 229 11 tcl.c:1319 handle_flash_bank_command(): 'esp32' driver usage field missing Debug: 230 11 command.c:146 script_debug(): command - target smp esp32.cpu0 esp32.cpu1 Debug: 231 11 target.c:6062 jim_target_smp(): 3 Debug: 232 11 target.c:6072 jim_target_smp(): esp32.cpu0 Debug: 233 11 target.c:6072 jim_target_smp(): esp32.cpu1 Debug: 234 11 command.c:146 script_debug(): command - esp32.cpu0 esp32 flashbootstrap 3.3 Debug: 236 11 command.c:146 script_debug(): command - esp32.cpu0 xtensa maskisr on Debug: 238 11 command.c:146 script_debug(): command - esp32.cpu0 xtensa smpbreak BreakIn BreakOut Debug: 240 11 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu0: set smpbreak=30000, state=1 Debug: 241 11 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu1: set smpbreak=30000, state=1 Debug: 242 11 command.c:146 script_debug(): command - esp32.cpu0 esp semihost_basedir . Debug: 244 11 command.c:146 script_debug(): command - esp32.cpu0 configure -event gdb-attach $_TARGETNAME_0 xtensa smpbreak BreakIn BreakOut

necessary to auto-probe flash bank when GDB is connected

halt

Debug: 245 11 command.c:146 script_debug(): command - esp32.cpu1 configure -event gdb-attach $_TARGETNAME_1 xtensa smpbreak BreakIn BreakOut

necessary to auto-probe flash bank when GDB is connected

    halt

Debug: 246 11 command.c:146 script_debug(): command - add_help_text program_esp32 write an image to flash, address is only required for binary images. verify, reset, exit are optional Debug: 248 11 command.c:1115 help_add_command(): added 'program_esp32' help text Debug: 249 11 command.c:146 script_debug(): command - add_usage_text program_esp32 [address] [verify] [reset] [exit] Debug: 251 11 command.c:1141 help_add_command(): added 'program_esp32' usage text Info : 252 12 server.c:312 add_service(): Listening on port 6666 for tcl connections Info : 253 12 server.c:312 add_service(): Listening on port 4444 for telnet connections Debug: 254 12 command.c:146 script_debug(): command - init Debug: 256 12 command.c:146 script_debug(): command - target init Debug: 258 12 command.c:146 script_debug(): command - target names Debug: 259 12 command.c:146 script_debug(): command - esp32.cpu0 cget -event gdb-flash-erase-start Debug: 260 13 command.c:146 script_debug(): command - esp32.cpu0 configure -event gdb-flash-erase-start reset init Debug: 261 13 command.c:146 script_debug(): command - esp32.cpu0 cget -event gdb-flash-write-end Debug: 262 13 command.c:146 script_debug(): command - esp32.cpu0 configure -event gdb-flash-write-end reset halt Debug: 263 13 command.c:146 script_debug(): command - esp32.cpu0 cget -event gdb-attach Debug: 264 13 command.c:146 script_debug(): command - esp32.cpu1 cget -event gdb-flash-erase-start Debug: 265 13 command.c:146 script_debug(): command - esp32.cpu1 configure -event gdb-flash-erase-start reset init Debug: 266 13 command.c:146 script_debug(): command - esp32.cpu1 cget -event gdb-flash-write-end Debug: 267 13 command.c:146 script_debug(): command - esp32.cpu1 configure -event gdb-flash-write-end reset halt Debug: 268 13 command.c:146 script_debug(): command - esp32.cpu1 cget -event gdb-attach Debug: 269 13 target.c:1661 handle_target_init_command(): Initializing targets... Debug: 270 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'litbase' (152) does not exist Debug: 271 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'ptevaddr' (153) does not exist Debug: 272 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'rasid' (154) does not exist Debug: 273 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'itlbcfg' (155) does not exist Debug: 274 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'dtlbcfg' (156) does not exist Debug: 275 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mepc' (157) does not exist Debug: 276 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'meps' (158) does not exist Debug: 277 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mesave' (159) does not exist Debug: 278 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mesr' (160) does not exist Debug: 279 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mecr' (161) does not exist Debug: 280 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mevaddr' (162) does not exist Debug: 281 13 semihosting_common.c:100 semihosting_common_init():
Debug: 282 13 semihosting_common.c:100 semihosting_common_init():
Debug: 283 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'litbase' (152) does not exist Debug: 284 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'ptevaddr' (153) does not exist Debug: 285 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'rasid' (154) does not exist Debug: 286 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'itlbcfg' (155) does not exist Debug: 287 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'dtlbcfg' (156) does not exist Debug: 288 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mepc' (157) does not exist Debug: 289 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'meps' (158) does not exist Debug: 290 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mesave' (159) does not exist Debug: 291 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mesr' (160) does not exist Debug: 292 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mecr' (161) does not exist Debug: 293 13 xtensa.c:2379 xtensa_build_reg_cache(): Special reg 'mevaddr' (162) does not exist Debug: 294 13 semihosting_common.c:100 semihosting_common_init():
Debug: 295 13 semihosting_common.c:100 semihosting_common_init():
Debug: 296 13 ftdi.c:650 ftdi_initialize(): ftdi interface using shortest path jtag state transitions Error: 297 27 mpsse.c:190 open_matching_device(): libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED Debug: 298 27 mpsse.c:422 mpsse_purge(): - Debug: 299 28 mpsse.c:703 mpsse_loopback_config(): off Debug: 300 28 mpsse.c:748 mpsse_set_frequency(): target 20000000 Hz Debug: 301 28 mpsse.c:740 mpsse_rtck_config(): off Debug: 302 28 mpsse.c:729 mpsse_divide_by_5_config(): off Debug: 303 28 mpsse.c:709 mpsse_set_divisor(): 1 Debug: 304 28 mpsse.c:772 mpsse_set_frequency(): actually 15000000 Hz Debug: 305 28 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value Debug: 306 28 core.c:1789 adapter_khz_to_speed(): have interface set up Debug: 307 28 mpsse.c:748 mpsse_set_frequency(): target 20000000 Hz Debug: 308 28 mpsse.c:740 mpsse_rtck_config(): off Debug: 309 28 mpsse.c:729 mpsse_divide_by_5_config(): off Debug: 310 28 mpsse.c:709 mpsse_set_divisor(): 1 Debug: 311 28 mpsse.c:772 mpsse_set_frequency(): actually 15000000 Hz Info : 312 28 ftdi.c:291 ftdi_speed(): ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling" Debug: 313 28 core.c:1785 adapter_khz_to_speed(): convert khz to interface specific speed value Debug: 314 28 core.c:1789 adapter_khz_to_speed(): have interface set up Info : 315 28 core.c:1565 adapter_init(): clock speed 20000 kHz Debug: 316 28 openocd.c:143 handle_init_command(): Debug Adapter init complete Debug: 317 28 command.c:146 script_debug(): command - transport init Debug: 319 28 transport.c:229 handle_transport_init(): handle_transport_init Debug: 320 28 core.c:830 jtag_add_reset(): SRST line released Debug: 321 28 core.c:855 jtag_add_reset(): TRST line released Debug: 322 28 core.c:327 jtag_call_event_callbacks(): jtag event: TAP reset Debug: 323 28 command.c:146 script_debug(): command - jtag arp_init Debug: 324 28 core.c:1578 jtag_init_inner(): Init JTAG chain Debug: 325 28 core.c:327 jtag_call_event_callbacks(): jtag event: TAP reset Debug: 326 28 core.c:1243 jtag_examine_chain(): DR scan interrogation for IDCODE/BYPASS Debug: 327 28 core.c:327 jtag_call_event_callbacks(): jtag event: TAP reset Info : 328 29 core.c:1142 jtag_examine_chain_display(): JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : 329 29 core.c:1142 jtag_examine_chain_display(): JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Debug: 330 29 core.c:1374 jtag_validate_ircapture(): IR capture validation scan Debug: 331 29 core.c:1432 jtag_validate_ircapture(): esp32.cpu0: IR capture 0x01 Debug: 332 29 core.c:1432 jtag_validate_ircapture(): esp32.cpu1: IR capture 0x01 Debug: 333 29 command.c:146 script_debug(): command - dap init Debug: 335 29 arm_dap.c:106 dap_init_all(): Initializing all DAPs ... Debug: 336 29 openocd.c:160 handle_init_command(): Examining targets... Debug: 337 29 target.c:1849 target_call_event_callbacks(): target event 19 (examine-start) for core esp32.cpu0 Debug: 338 29 esp32.c:523 esp32_handle_target_event(): 19 Debug: 339 29 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 19 Debug: 340 29 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 19 Debug: 341 29 xtensa.c:2447 xtensa_handle_target_event(): 19 Debug: 342 29 xtensa.c:685 xtensa_examine(): xtensa_examine coreid=0 Debug: 343 30 xtensa.c:698 xtensa_examine(): OCD_ID = 0733bff2 Debug: 344 30 target.c:1849 target_call_event_callbacks(): target event 21 (examine-end) for core esp32.cpu0 Debug: 345 30 esp32.c:523 esp32_handle_target_event(): 21 Debug: 346 30 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 21 Debug: 347 30 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 21 Debug: 348 30 xtensa.c:2447 xtensa_handle_target_event(): 21 Debug: 349 30 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x30000 clear=0x600000 Debug: 350 30 target.c:1849 target_call_event_callbacks(): target event 19 (examine-start) for core esp32.cpu1 Debug: 351 30 esp32.c:523 esp32_handle_target_event(): 19 Debug: 352 30 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 19 Debug: 353 30 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 19 Debug: 354 30 xtensa.c:2447 xtensa_handle_target_event(): 19 Debug: 355 30 xtensa.c:685 xtensa_examine(): xtensa_examine coreid=1 Debug: 356 30 xtensa.c:698 xtensa_examine(): OCD_ID = 0733bff2 Debug: 357 30 target.c:1849 target_call_event_callbacks(): target event 21 (examine-end) for core esp32.cpu1 Debug: 358 30 esp32.c:523 esp32_handle_target_event(): 21 Debug: 359 30 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 21 Debug: 360 30 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 21 Debug: 361 30 xtensa.c:2447 xtensa_handle_target_event(): 21 Debug: 362 30 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu1: write smpbreak set=0x30000 clear=0x600000 Debug: 363 30 command.c:146 script_debug(): command - flash init Debug: 364 31 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu0: start Debug: 365 33 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 366 36 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 367 37 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 368 37 xtensa.c:1858 xtensa_poll(): esp32.cpu0: Target halted, pc=0x40000400, debug_reason=00000001, oldstate=00000001 Debug: 369 37 xtensa.c:1863 xtensa_poll(): esp32.cpu0: Halt reason=0x00000008, exc_cause=0, dsr=0x8080cc11 Info : 370 37 xtensa.c:1866 xtensa_poll(): esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000001 Debug: 371 37 esp_xtensa_smp.c:174 esp_xtensa_smp_poll(): esp32.cpu0: Check for unexamined cores after reset Debug: 372 37 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu0' Debug: 373 37 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu1' Debug: 374 37 esp_xtensa_smp.c:285 esp_xtensa_smp_update_halt_gdb(): Poll target 'esp32.cpu1' Debug: 375 37 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu1: start Debug: 376 40 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 377 43 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 378 44 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 379 44 xtensa.c:1858 xtensa_poll(): esp32.cpu1: Target halted, pc=0x40000400, debug_reason=00000000, oldstate=00000001 Debug: 380 44 xtensa.c:1863 xtensa_poll(): esp32.cpu1: Halt reason=0x00000020, exc_cause=0, dsr=0x8080cc11 Info : 381 44 xtensa.c:1866 xtensa_poll(): esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000 Debug: 382 44 target.c:1849 target_call_event_callbacks(): target event 0 (gdb-halt) for core esp32.cpu1 Debug: 383 44 esp32.c:523 esp32_handle_target_event(): 0 Debug: 384 44 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 0 Debug: 385 44 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 0 Debug: 386 44 xtensa.c:2447 xtensa_handle_target_event(): 0 Debug: 387 44 target.c:1849 target_call_event_callbacks(): target event 1 (halted) for core esp32.cpu1 Debug: 388 44 esp32.c:523 esp32_handle_target_event(): 1 Debug: 389 44 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 1 Debug: 390 44 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 1 Debug: 391 44 xtensa.c:2447 xtensa_handle_target_event(): 1 Debug: 392 44 target.c:2742 target_write_u32(): address: 0x3ff5f064, value: 0x50d83aa1 Debug: 393 45 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 394 45 target.c:2742 target_write_u32(): address: 0x3ff5f048, value: 0x00000000 Debug: 395 46 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 396 46 target.c:2742 target_write_u32(): address: 0x3ff60064, value: 0x50d83aa1 Debug: 397 46 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 398 46 target.c:2742 target_write_u32(): address: 0x3ff60048, value: 0x00000000 Debug: 399 46 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 400 46 target.c:2742 target_write_u32(): address: 0x3ff480a4, value: 0x50d83aa1 Debug: 401 47 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 402 47 target.c:2742 target_write_u32(): address: 0x3ff4808c, value: 0x00000000 Debug: 403 47 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 404 47 esp_xtensa_smp.c:314 esp_xtensa_smp_update_halt_gdb(): exit Debug: 405 47 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 406 47 target.c:1849 target_call_event_callbacks(): target event 0 (gdb-halt) for core esp32.cpu0 Debug: 407 47 esp32.c:523 esp32_handle_target_event(): 0 Debug: 408 47 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 0 Debug: 409 47 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 0 Debug: 410 47 xtensa.c:2447 xtensa_handle_target_event(): 0 Debug: 411 47 target.c:1849 target_call_event_callbacks(): target event 1 (halted) for core esp32.cpu0 Debug: 412 47 esp32.c:523 esp32_handle_target_event(): 1 Debug: 413 47 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 1 Debug: 414 47 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 1 Debug: 415 47 xtensa.c:2447 xtensa_handle_target_event(): 1 Debug: 416 47 target.c:2742 target_write_u32(): address: 0x3ff5f064, value: 0x50d83aa1 Debug: 417 48 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 418 48 target.c:2742 target_write_u32(): address: 0x3ff5f048, value: 0x00000000 Debug: 419 48 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 420 48 target.c:2742 target_write_u32(): address: 0x3ff60064, value: 0x50d83aa1 Debug: 421 48 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 422 48 target.c:2742 target_write_u32(): address: 0x3ff60048, value: 0x00000000 Debug: 423 49 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 424 49 target.c:2742 target_write_u32(): address: 0x3ff480a4, value: 0x50d83aa1 Debug: 425 49 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 426 49 target.c:2742 target_write_u32(): address: 0x3ff4808c, value: 0x00000000 Debug: 427 50 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 428 50 esp_xtensa_smp.c:174 esp_xtensa_smp_poll(): esp32.cpu1: Check for unexamined cores after reset Debug: 430 50 tcl.c:1385 handle_flash_init_command(): Initializing flash devices... Debug: 431 50 command.c:146 script_debug(): command - nand init Debug: 433 52 tcl.c:498 handle_nand_init_command(): Initializing NAND devices... Debug: 434 52 command.c:146 script_debug(): command - pld init Debug: 436 54 pld.c:206 handle_pld_init_command(): Initializing PLDs... Info : 437 54 gdb_server.c:3512 gdb_target_start(): starting gdb server for esp32.cpu0 on 3333 Info : 438 54 server.c:312 add_service(): Listening on port 3333 for gdb connections Info : 439 20289 server.c:100 add_connection(): accepting 'tcl' connection on tcp/6666 Info : 440 20289 server.c:577 server_loop(): dropped 'tcl' connection Info : 441 20291 server.c:100 add_connection(): accepting 'tcl' connection on tcp/6666 Debug: 442 20291 command.c:146 script_debug(): command - echo Flashing d:/ontwikkeling/esp32/ble_gateway/build/partition_table/partition-table.bin at 0x8000 User : 444 20293 command.c:769 jim_echo(): Flashing d:/ontwikkeling/esp32/ble_gateway/build/partition_table/partition-table.bin at 0x8000 Debug: 445 20294 command.c:146 script_debug(): command - flash list Debug: 446 20294 command.c:146 script_debug(): command - init Debug: 448 20295 command.c:146 script_debug(): command - reset init Debug: 450 20296 target.c:1867 target_call_reset_callbacks(): target reset 3 (init) Debug: 451 20296 target.c:1867 target_call_reset_callbacks(): target reset 3 (init) Debug: 452 20296 command.c:146 script_debug(): command - target names Debug: 453 20296 command.c:146 script_debug(): command - esp32.cpu0 invoke-event reset-start Debug: 454 20296 command.c:146 script_debug(): command - esp32.cpu1 invoke-event reset-start Debug: 455 20296 command.c:146 script_debug(): command - transport select Debug: 456 20296 command.c:146 script_debug(): command - jtag arp_init-reset Debug: 457 20296 core.c:1694 jtag_init_reset(): Initializing with hard TRST+SRST reset Debug: 458 20296 core.c:843 jtag_add_reset(): JTAG reset with TLR instead of TRST Debug: 459 20296 core.c:327 jtag_call_event_callbacks(): jtag event: TAP reset Debug: 460 20297 core.c:1578 jtag_init_inner(): Init JTAG chain Debug: 461 20297 core.c:327 jtag_call_event_callbacks(): jtag event: TAP reset Debug: 462 20297 core.c:1243 jtag_examine_chain(): DR scan interrogation for IDCODE/BYPASS Debug: 463 20297 core.c:327 jtag_call_event_callbacks(): jtag event: TAP reset Info : 464 20297 core.c:1142 jtag_examine_chain_display(): JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : 465 20297 core.c:1142 jtag_examine_chain_display(): JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Debug: 466 20297 core.c:1374 jtag_validate_ircapture(): IR capture validation scan Debug: 467 20297 core.c:1432 jtag_validate_ircapture(): esp32.cpu0: IR capture 0x01 Debug: 468 20297 core.c:1432 jtag_validate_ircapture(): esp32.cpu1: IR capture 0x01 Debug: 469 20297 command.c:146 script_debug(): command - transport select Debug: 470 20297 command.c:146 script_debug(): command - esp32.cpu0 cget -chain-position Debug: 471 20297 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu0 Debug: 472 20297 command.c:146 script_debug(): command - esp32.cpu0 invoke-event examine-start Debug: 473 20297 command.c:146 script_debug(): command - esp32.cpu0 arp_examine allow-defer Debug: 474 20297 xtensa.c:685 xtensa_examine(): xtensa_examine coreid=0 Debug: 475 20297 xtensa.c:698 xtensa_examine(): OCD_ID = 0733bff2 Debug: 476 20297 command.c:146 script_debug(): command - esp32.cpu0 invoke-event examine-end Debug: 477 20298 command.c:146 script_debug(): command - transport select Debug: 478 20298 command.c:146 script_debug(): command - esp32.cpu1 cget -chain-position Debug: 479 20298 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu1 Debug: 480 20298 command.c:146 script_debug(): command - esp32.cpu1 invoke-event examine-start Debug: 481 20298 command.c:146 script_debug(): command - esp32.cpu1 arp_examine allow-defer Debug: 482 20298 xtensa.c:685 xtensa_examine(): xtensa_examine coreid=1 Debug: 483 20298 xtensa.c:698 xtensa_examine(): OCD_ID = 0733bff2 Debug: 484 20298 command.c:146 script_debug(): command - esp32.cpu1 invoke-event examine-end Debug: 485 20298 command.c:146 script_debug(): command - esp32.cpu0 invoke-event reset-assert-pre Debug: 486 20298 command.c:146 script_debug(): command - esp32.cpu1 invoke-event reset-assert-pre Debug: 487 20298 command.c:146 script_debug(): command - transport select Debug: 488 20298 command.c:146 script_debug(): command - esp32.cpu0 cget -chain-position Debug: 489 20298 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu0 Debug: 490 20298 command.c:146 script_debug(): command - esp32.cpu0 arp_reset assert 1 Debug: 491 20298 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 492 20298 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 493 20298 esp_xtensa_smp.c:82 esp_xtensa_smp_assert_reset(): esp32.cpu0: begin Debug: 494 20298 esp32.c:305 esp32_soc_reset(): start Debug: 495 20298 esp32.c:390 esp32_soc_reset(): Loading stub code into RTC RAM Debug: 496 20298 target.c:2507 target_read_buffer(): reading buffer of 212 byte at 0x50000000 Debug: 497 20299 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 498 20299 target.c:2445 target_write_buffer(): writing buffer of 212 byte at 0x50000000 Debug: 499 20300 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 500 20300 esp32.c:415 esp32_soc_reset(): Resuming the target Debug: 501 20300 xtensa.c:1251 xtensa_resume(): esp32.cpu0 Debug: 502 20300 xtensa.c:1180 xtensa_prepare_resume(): esp32.cpu0: current=0 address=0x50000004, handle_breakpoints=0, debug_execution=0) Debug: 503 20300 xtensa.c:512 xtensa_write_dirty_registers(): esp32.cpu0: start Debug: 504 20300 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg pc val 50000004 Debug: 505 20300 xtensa.c:648 xtensa_queue_write_dirty_user_regs_u32(): esp32.cpu0: start Debug: 506 20300 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a3 value 00000000, num =4 Debug: 507 20301 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 508 20301 xtensa.c:1233 xtensa_do_resume(): esp32.cpu0: start Debug: 509 20301 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (80000000) Debug: 510 20301 target.c:1849 target_call_event_callbacks(): target event 2 (resumed) for core esp32.cpu0 Debug: 511 20301 esp32.c:523 esp32_handle_target_event(): 2 Debug: 512 20301 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 2 Debug: 513 20301 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 2 Debug: 514 20301 xtensa.c:2447 xtensa_handle_target_event(): 2 Debug: 515 20301 esp32.c:424 esp32_soc_reset(): resume done, waiting for the target to come alive Debug: 516 20461 esp32.c:440 esp32_soc_reset(): halting the target Debug: 517 20461 xtensa.c:1133 xtensa_halt(): xtensa_halt, target: esp32.cpu0 Debug: 518 20461 xtensa.c:1145 xtensa_halt(): esp32.cpu0: Core status 0x80000000 Info : 519 20461 xtensa.c:1804 xtensa_poll(): esp32.cpu0: Debug controller was reset. Debug: 520 20461 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x30000 clear=0x600000 Info : 521 20461 xtensa.c:1810 xtensa_poll(): esp32.cpu0: Core was reset. Debug: 522 20462 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu0: start Debug: 523 20464 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (80208411) Debug: 524 20467 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (80208411) Debug: 525 20468 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (80208411) Debug: 526 20468 xtensa.c:1858 xtensa_poll(): esp32.cpu0: Target halted, pc=0x500000CF, debug_reason=00000000, oldstate=00000001 Debug: 527 20468 xtensa.c:1863 xtensa_poll(): esp32.cpu0: Halt reason=0x00000020, exc_cause=0, dsr=0x80208411 Info : 528 20468 xtensa.c:1866 xtensa_poll(): esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000 Debug: 529 20468 esp_xtensa.c:152 esp_xtensa_poll(): esp32.cpu0: Clear debug stubs info Debug: 530 20468 esp_xtensa_smp.c:257 esp_xtensa_smp_update_halt_gdb(): GDB target 'esp32.cpu0' Info : 531 20468 esp_xtensa_smp.c:262 esp_xtensa_smp_update_halt_gdb(): Set GDB target to 'esp32.cpu0' Debug: 532 20468 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu0' Debug: 533 20468 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu1' Debug: 534 20468 esp_xtensa_smp.c:314 esp_xtensa_smp_update_halt_gdb(): exit Debug: 535 20468 target.c:1849 target_call_event_callbacks(): target event 0 (gdb-halt) for core esp32.cpu0 Debug: 536 20468 esp32.c:523 esp32_handle_target_event(): 0 Debug: 537 20468 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 0 Debug: 538 20468 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 0 Debug: 539 20468 xtensa.c:2447 xtensa_handle_target_event(): 0 Debug: 540 20468 target.c:1849 target_call_event_callbacks(): target event 1 (halted) for core esp32.cpu0 Debug: 541 20468 esp32.c:523 esp32_handle_target_event(): 1 Debug: 542 20468 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 1 Debug: 543 20468 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 1 Debug: 544 20468 xtensa.c:2447 xtensa_handle_target_event(): 1 Debug: 545 20468 target.c:2742 target_write_u32(): address: 0x3ff5f064, value: 0x50d83aa1 Debug: 546 20468 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8000CC11) Debug: 547 20468 target.c:2742 target_write_u32(): address: 0x3ff5f048, value: 0x00000000 Debug: 548 20468 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8000CC11) Debug: 549 20468 target.c:2742 target_write_u32(): address: 0x3ff60064, value: 0x50d83aa1 Debug: 550 20469 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8000CC11) Debug: 551 20469 target.c:2742 target_write_u32(): address: 0x3ff60048, value: 0x00000000 Debug: 552 20469 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8000CC11) Debug: 553 20469 target.c:2742 target_write_u32(): address: 0x3ff480a4, value: 0x50d83aa1 Debug: 554 20469 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8000CC11) Debug: 555 20469 target.c:2742 target_write_u32(): address: 0x3ff4808c, value: 0x00000000 Debug: 556 20470 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8000CC11) Debug: 557 20470 esp32.c:449 esp32_soc_reset(): restoring RTC_SLOW_MEM Debug: 558 20470 target.c:2445 target_write_buffer(): writing buffer of 212 byte at 0x50000000 Debug: 559 20471 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8000CC11) Debug: 560 20471 FreeRTOS.c:1157 FreeRTOS_post_reset_cleanup(): FreeRTOS_post_reset_cleanup Debug: 561 20471 xtensa.c:845 xtensa_assert_reset(): esp32.cpu0: target_number=0, begin Debug: 562 20471 xtensa.c:845 xtensa_assert_reset(): esp32.cpu1: target_number=1, begin Debug: 563 20471 command.c:146 script_debug(): command - transport select Debug: 564 20471 command.c:146 script_debug(): command - esp32.cpu1 cget -chain-position Debug: 565 20471 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu1 Debug: 566 20471 command.c:146 script_debug(): command - esp32.cpu1 arp_reset assert 1 Debug: 567 20471 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 568 20471 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 569 20471 esp_xtensa_smp.c:82 esp_xtensa_smp_assert_reset(): esp32.cpu1: begin Debug: 570 20471 command.c:146 script_debug(): command - esp32.cpu0 invoke-event reset-assert-post Debug: 571 20471 command.c:146 script_debug(): command - esp32.cpu1 invoke-event reset-assert-post Debug: 572 20471 command.c:146 script_debug(): command - esp32.cpu0 invoke-event reset-deassert-pre Debug: 573 20471 command.c:146 script_debug(): command - esp32.cpu1 invoke-event reset-deassert-pre Debug: 574 20471 command.c:146 script_debug(): command - transport select Debug: 575 20471 command.c:146 script_debug(): command - esp32.cpu0 cget -chain-position Debug: 576 20471 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu0 Debug: 577 20471 command.c:146 script_debug(): command - esp32.cpu0 arp_reset deassert 1 Debug: 578 20471 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 579 20471 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 580 20471 esp_xtensa_smp.c:106 esp_xtensa_smp_deassert_reset(): esp32.cpu0: begin Debug: 581 20471 xtensa.c:864 xtensa_deassert_reset(): esp32.cpu0 halt=1 Debug: 582 20471 command.c:146 script_debug(): command - transport select Debug: 583 20471 command.c:146 script_debug(): command - esp32.cpu1 cget -chain-position Debug: 584 20471 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu1 Debug: 585 20471 command.c:146 script_debug(): command - esp32.cpu1 arp_reset deassert 1 Debug: 586 20471 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 587 20471 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 588 20471 esp_xtensa_smp.c:106 esp_xtensa_smp_deassert_reset(): esp32.cpu1: begin Debug: 589 20471 xtensa.c:864 xtensa_deassert_reset(): esp32.cpu1 halt=1 Debug: 590 20471 command.c:146 script_debug(): command - esp32.cpu0 invoke-event reset-deassert-post Debug: 591 20471 command.c:146 script_debug(): command - esp32.cpu1 invoke-event reset-deassert-post Debug: 592 20472 command.c:146 script_debug(): command - transport select Debug: 593 20472 command.c:146 script_debug(): command - esp32.cpu0 cget -chain-position Debug: 594 20472 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu0 Debug: 595 20472 command.c:146 script_debug(): command - esp32.cpu0 was_examined Debug: 596 20472 command.c:146 script_debug(): command - esp32.cpu0 arp_waitstate halted 1000 Info : 597 20472 xtensa.c:1810 xtensa_poll(): esp32.cpu0: Core was reset. Debug: 598 20472 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu0: start Debug: 599 20474 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (81A0CC11) Debug: 600 20478 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (81A0CC11) Debug: 601 20478 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (81A0CC11) Debug: 602 20478 xtensa.c:1858 xtensa_poll(): esp32.cpu0: Target halted, pc=0x40000400, debug_reason=00000000, oldstate=00000001 Debug: 603 20478 xtensa.c:1863 xtensa_poll(): esp32.cpu0: Halt reason=0x00000020, exc_cause=0, dsr=0x81a0cc11 Info : 604 20478 xtensa.c:1866 xtensa_poll(): esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000 Debug: 605 20478 esp_xtensa.c:152 esp_xtensa_poll(): esp32.cpu0: Clear debug stubs info Debug: 606 20478 esp_xtensa_smp.c:257 esp_xtensa_smp_update_halt_gdb(): GDB target 'esp32.cpu0' Debug: 607 20478 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu0' Debug: 608 20478 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu1' Debug: 609 20478 esp_xtensa_smp.c:285 esp_xtensa_smp_update_halt_gdb(): Poll target 'esp32.cpu1' Info : 610 20479 xtensa.c:1804 xtensa_poll(): esp32.cpu1: Debug controller was reset. Debug: 611 20479 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu1: write smpbreak set=0x30000 clear=0x600000 Info : 612 20479 xtensa.c:1810 xtensa_poll(): esp32.cpu1: Core was reset. Debug: 613 20479 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu1: start Debug: 614 20481 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (80A08411) Debug: 615 20485 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (80A08411) Debug: 616 20485 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (80A08411) Debug: 617 20485 xtensa.c:1858 xtensa_poll(): esp32.cpu1: Target halted, pc=0x40000400, debug_reason=00000000, oldstate=00000001 Debug: 618 20485 xtensa.c:1863 xtensa_poll(): esp32.cpu1: Halt reason=0x00000020, exc_cause=0, dsr=0x80a08411 Info : 619 20485 xtensa.c:1866 xtensa_poll(): esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000 Debug: 620 20485 esp_xtensa.c:152 esp_xtensa_poll(): esp32.cpu1: Clear debug stubs info Debug: 621 20486 target.c:1849 target_call_event_callbacks(): target event 0 (gdb-halt) for core esp32.cpu1 Debug: 622 20486 esp32.c:523 esp32_handle_target_event(): 0 Debug: 623 20486 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 0 Debug: 624 20486 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 0 Debug: 625 20486 xtensa.c:2447 xtensa_handle_target_event(): 0 Debug: 626 20486 target.c:1849 target_call_event_callbacks(): target event 1 (halted) for core esp32.cpu1 Debug: 627 20486 esp32.c:523 esp32_handle_target_event(): 1 Debug: 628 20486 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 1 Debug: 629 20486 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 1 Debug: 630 20486 xtensa.c:2447 xtensa_handle_target_event(): 1 Debug: 631 20486 target.c:2742 target_write_u32(): address: 0x3ff5f064, value: 0x50d83aa1 Debug: 632 20486 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 633 20486 target.c:2742 target_write_u32(): address: 0x3ff5f048, value: 0x00000000 Debug: 634 20486 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 635 20486 target.c:2742 target_write_u32(): address: 0x3ff60064, value: 0x50d83aa1 Debug: 636 20487 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 637 20487 target.c:2742 target_write_u32(): address: 0x3ff60048, value: 0x00000000 Debug: 638 20487 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 639 20487 target.c:2742 target_write_u32(): address: 0x3ff480a4, value: 0x50d83aa1 Debug: 640 20487 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 641 20487 target.c:2742 target_write_u32(): address: 0x3ff4808c, value: 0x00000000 Debug: 642 20487 xtensa.c:788 xtensa_core_status_check(): esp32.cpu1: DSR (8080CC11) Debug: 643 20487 esp_xtensa_smp.c:314 esp_xtensa_smp_update_halt_gdb(): exit Debug: 644 20487 target.c:1849 target_call_event_callbacks(): target event 0 (gdb-halt) for core esp32.cpu0 Debug: 645 20487 esp32.c:523 esp32_handle_target_event(): 0 Debug: 646 20487 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 0 Debug: 647 20487 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 0 Debug: 648 20487 xtensa.c:2447 xtensa_handle_target_event(): 0 Debug: 649 20487 target.c:1849 target_call_event_callbacks(): target event 1 (halted) for core esp32.cpu0 Debug: 650 20487 esp32.c:523 esp32_handle_target_event(): 1 Debug: 651 20487 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 1 Debug: 652 20487 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 1 Debug: 653 20487 xtensa.c:2447 xtensa_handle_target_event(): 1 Debug: 654 20487 target.c:2742 target_write_u32(): address: 0x3ff5f064, value: 0x50d83aa1 Debug: 655 20488 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 656 20488 target.c:2742 target_write_u32(): address: 0x3ff5f048, value: 0x00000000 Debug: 657 20488 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 658 20488 target.c:2742 target_write_u32(): address: 0x3ff60064, value: 0x50d83aa1 Debug: 659 20488 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 660 20488 target.c:2742 target_write_u32(): address: 0x3ff60048, value: 0x00000000 Debug: 661 20489 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 662 20489 target.c:2742 target_write_u32(): address: 0x3ff480a4, value: 0x50d83aa1 Debug: 663 20489 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 664 20489 target.c:2742 target_write_u32(): address: 0x3ff4808c, value: 0x00000000 Debug: 665 20489 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 666 20489 command.c:146 script_debug(): command - esp32.cpu0 curstate Debug: 667 20489 command.c:146 script_debug(): command - transport select Debug: 668 20489 command.c:146 script_debug(): command - esp32.cpu1 cget -chain-position Debug: 669 20489 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu1 Debug: 670 20489 command.c:146 script_debug(): command - esp32.cpu1 was_examined Debug: 671 20489 command.c:146 script_debug(): command - esp32.cpu1 arp_waitstate halted 1000 Debug: 672 20490 command.c:146 script_debug(): command - esp32.cpu1 curstate Debug: 673 20490 command.c:146 script_debug(): command - transport select Debug: 674 20490 command.c:146 script_debug(): command - esp32.cpu0 cget -chain-position Debug: 675 20490 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu0 Debug: 676 20490 command.c:146 script_debug(): command - esp32.cpu0 was_examined Debug: 677 20490 command.c:146 script_debug(): command - esp32.cpu0 arp_waitstate halted 5000 Debug: 678 20491 command.c:146 script_debug(): command - esp32.cpu0 invoke-event reset-init Debug: 679 20491 command.c:146 script_debug(): command - transport select Debug: 680 20491 command.c:146 script_debug(): command - esp32.cpu1 cget -chain-position Debug: 681 20491 command.c:146 script_debug(): command - jtag tapisenabled esp32.cpu1 Debug: 682 20491 command.c:146 script_debug(): command - esp32.cpu1 was_examined Debug: 683 20491 command.c:146 script_debug(): command - esp32.cpu1 arp_waitstate halted 5000 Debug: 684 20491 command.c:146 script_debug(): command - esp32.cpu1 invoke-event reset-init Debug: 685 20491 command.c:146 script_debug(): command - esp32.cpu0 invoke-event reset-end Debug: 686 20491 command.c:146 script_debug(): command - esp32.cpu1 invoke-event reset-end Debug: 687 20493 command.c:146 script_debug(): command - target names Debug: 688 20493 command.c:146 script_debug(): command - esp32.cpu0 cget -work-area-backup Debug: 689 20493 command.c:146 script_debug(): command - esp32.cpu0 configure -work-area-backup 0 Debug: 690 20493 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 691 20493 command.c:146 script_debug(): command - esp32.cpu0 cget -alt-work-area-backup Debug: 692 20493 command.c:146 script_debug(): command - esp32.cpu0 configure -alt-work-area-backup 0 Debug: 693 20493 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 694 20493 command.c:146 script_debug(): command - esp32.cpu1 cget -work-area-backup Debug: 695 20493 command.c:146 script_debug(): command - esp32.cpu1 configure -work-area-backup 0 Debug: 696 20493 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 697 20493 command.c:146 script_debug(): command - esp32.cpu1 cget -alt-work-area-backup Debug: 698 20493 command.c:146 script_debug(): command - esp32.cpu1 configure -alt-work-area-backup 0 Debug: 699 20493 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 700 20493 command.c:146 script_debug(): command - esp compression off Debug: 702 20494 esp_flash.c:1377 esp_flash_cmd_set_compression(): Flash compressed upload is off Debug: 703 20494 esp_flash.c:929 esp_flash_probe(): Flash size = 0 KB @ 0x00000000 'esp32.cpu0' - 'halted' Debug: 704 20495 esp_flash.c:242 esp_flasher_algorithm_init(): base=00000000 set=0 Debug: 705 20495 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 706 20495 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x0 clear=0x630000 Debug: 707 20495 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu0: set smpbreak=0, state=2 Debug: 708 20495 algorithm.c:339 algorithm_load_func_image(): stub: base 0x0, start 0x40092584, 2 sections Debug: 709 20495 algorithm.c:346 algorithm_load_func_image(): addr 0x00000000, sz 10967, flags 1 Debug: 710 20495 target.c:2043 alloc_working_area_try_do(): MMU disabled, using physical address for working memory 0x40090000 Debug: 711 20495 target.c:2097 alloc_working_area_try_do(): allocated new working area of 10968 bytes at address 0x40090000 Debug: 712 20495 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 713 20495 target.c:1964 print_wa_layout(): 0x40092ad8-0x40093fff (5416 bytes) Debug: 714 20495 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090000 Debug: 715 20497 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 716 20497 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090200 Debug: 717 20500 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 718 20500 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090400 Debug: 719 20502 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 720 20502 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090600 Debug: 721 20504 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 722 20504 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090800 Debug: 723 20507 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 724 20507 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090a00 Debug: 725 20509 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 726 20509 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090c00 Debug: 727 20511 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 728 20511 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090e00 Debug: 729 20514 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 730 20514 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091000 Debug: 731 20516 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 732 20516 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091200 Debug: 733 20519 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 734 20519 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091400 Debug: 735 20521 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 736 20521 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091600 Debug: 737 20523 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 738 20523 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091800 Debug: 739 20526 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 740 20526 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091a00 Debug: 741 20528 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 742 20528 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091c00 Debug: 743 20531 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 744 20531 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091e00 Debug: 745 20533 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 746 20533 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092000 Debug: 747 20536 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 748 20536 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092200 Debug: 749 20538 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 750 20538 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092400 Debug: 751 20540 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 752 20540 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092600 Debug: 753 20543 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 754 20543 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092800 Debug: 755 20545 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 756 20545 target.c:2445 target_write_buffer(): writing buffer of 215 byte at 0x40092a00 Debug: 757 20546 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 758 20547 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 759 20547 algorithm.c:346 algorithm_load_func_image(): addr 0x00000000, sz 928, flags 0 Debug: 760 20547 algorithm.c:376 algorithm_load_func_image(): DATA sec size 928 -> 928 Debug: 761 20547 algorithm.c:379 algorithm_load_func_image(): BSS sec size 53 -> 56 Debug: 762 20547 target.c:2043 alloc_working_area_try_do(): MMU disabled, using physical address for working memory 0x3ffc0000 Debug: 763 20547 target.c:2097 alloc_working_area_try_do(): allocated new working area of 984 bytes at address 0x3ffc0000 Debug: 764 20547 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 765 20547 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffd7fff (97320 bytes) Debug: 766 20547 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x3ffc0000 Debug: 767 20549 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 768 20549 target.c:2445 target_write_buffer(): writing buffer of 416 byte at 0x3ffc0200 Debug: 769 20551 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 770 20551 target.c:2097 alloc_working_area_try_do(): allocated new working area of 1300 bytes at address 0x3ffc03d8 Debug: 771 20551 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 772 20551 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffc08eb (1300 bytes) Debug: 773 20551 target.c:1964 print_wa_layout(): 0x3ffc08ec-0x3ffd7fff (96020 bytes) Debug: 774 20551 target.c:2097 alloc_working_area_try_do(): allocated new working area of 28 bytes at address 0x40092ad8 Debug: 775 20551 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 776 20551 target.c:1964 print_wa_layout(): 0x40092ad8-0x40092af3 (28 bytes) Debug: 777 20551 target.c:1964 print_wa_layout(): 0x40092af4-0x40093fff (5388 bytes) Debug: 778 20551 target.c:2445 target_write_buffer(): writing buffer of 28 byte at 0x40092ad8 Debug: 779 20551 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 780 20551 algorithm.c:462 algorithm_load_func_image(): Stub loaded in 55.85 ms Debug: 781 20551 xtensa_algorithm.c:112 xtensa_algo_init(): reg params count 9 (6/3). Debug: 782 20551 xtensa_algorithm.c:59 xtensa_algo_regs_init_start(): Check stack addr 0x3ffc08ec Debug: 783 20551 xtensa_algorithm.c:62 xtensa_algo_regs_init_start(): Adjust stack addr to 0x3ffc08e0 Debug: 784 20551 xtensa_algorithm.c:127 xtensa_algo_init(): Set arg[0] = 5 (a2) Debug: 785 20551 xtensa_algorithm.c:137 xtensa_algo_init(): Set arg[1] = -1 (a3) Debug: 786 20551 xtensa_algorithm.c:137 xtensa_algo_init(): Set arg[2] = 0 (a4) Debug: 787 20551 target.c:2097 alloc_working_area_try_do(): allocated new working area of 28 bytes at address 0x3ffc08ec Debug: 788 20551 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 789 20551 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffc08eb (1300 bytes) Debug: 790 20551 target.c:1964 print_wa_layout(): * 0x3ffc08ec-0x3ffc0907 (28 bytes) Debug: 791 20551 target.c:1964 print_wa_layout(): 0x3ffc0908-0x3ffd7fff (95992 bytes) Debug: 792 20551 algorithm.c:224 algorithm_run(): Algorithm start @ 0x40092ad8, stack 1300 bytes @ 0x3ffc08ec Debug: 793 20551 xtensa.c:1251 xtensa_resume(): esp32.cpu0 Debug: 794 20551 xtensa.c:1180 xtensa_prepare_resume(): esp32.cpu0: current=0 address=0x40092ad8, handle_breakpoints=1, debug_execution=1) Debug: 795 20551 xtensa.c:512 xtensa_write_dirty_registers(): esp32.cpu0: start Debug: 796 20551 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg pc val 40092AD8 Debug: 797 20551 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowbase val 00000000 Debug: 798 20551 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowstart val 00000001 Debug: 799 20551 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ps val 00060025 Debug: 800 20551 xtensa.c:648 xtensa_queue_write_dirty_user_regs_u32(): esp32.cpu0: start Debug: 801 20552 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a0 value 00000000, num =1 Debug: 802 20552 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a1 value 3FFC08D0, num =2 Debug: 803 20552 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a2 value 00000005, num =3 Debug: 804 20552 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a3 value FFFFFFFF, num =4 Debug: 805 20552 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a4 value 3FFC08EC, num =5 Debug: 806 20552 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a8 value 40092584, num =9 Debug: 807 20552 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 808 20552 xtensa.c:1233 xtensa_do_resume(): esp32.cpu0: start Debug: 809 20552 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC01) Debug: 810 20552 target.c:1849 target_call_event_callbacks(): target event 2 (resumed) for core esp32.cpu0 Debug: 811 20552 esp32.c:523 esp32_handle_target_event(): 2 Debug: 812 20552 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 2 Debug: 813 20552 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 2 Debug: 814 20552 xtensa.c:2447 xtensa_handle_target_event(): 2 Debug: 815 20552 algorithm.c:246 algorithm_run(): Wait algorithm completion Debug: 816 20553 target.c:3312 target_wait_state(): waiting for target halted... Debug: 817 20554 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu0: start Debug: 818 20556 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 819 20560 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 820 20560 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 821 20560 xtensa.c:1858 xtensa_poll(): esp32.cpu0: Target halted, pc=0x400003C0, debug_reason=00000001, oldstate=00000004 Debug: 822 20560 xtensa.c:1863 xtensa_poll(): esp32.cpu0: Halt reason=0x00000008, exc_cause=0, dsr=0x8080cc11 Info : 823 20560 xtensa.c:1866 xtensa_poll(): esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Debug: 824 20561 esp_xtensa_smp.c:257 esp_xtensa_smp_update_halt_gdb(): GDB target 'esp32.cpu0' Debug: 825 20561 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu0' Debug: 826 20561 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu1' Debug: 827 20561 esp_xtensa_smp.c:314 esp_xtensa_smp_update_halt_gdb(): exit Debug: 828 20561 target.c:1849 target_call_event_callbacks(): target event 17 (debug-halted) for core esp32.cpu0 Debug: 829 20561 esp32.c:523 esp32_handle_target_event(): 17 Debug: 830 20561 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 17 Debug: 831 20561 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 17 Debug: 832 20561 xtensa.c:2447 xtensa_handle_target_event(): 17 Debug: 833 20561 xtensa.c:2260 xtensa_wait_algorithm(): Read mem params Debug: 834 20561 xtensa.c:2262 xtensa_wait_algorithm(): Check mem param @ 0x3ffc08ec Debug: 835 20561 xtensa.c:2264 xtensa_wait_algorithm(): Read mem param @ 0x3ffc08ec Debug: 836 20561 target.c:2507 target_read_buffer(): reading buffer of 28 byte at 0x3ffc08ec Debug: 837 20561 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 838 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a10: 0xfffffffd -> 0x00000000 Debug: 839 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a9: 0x00000001 -> 0x00000000 Debug: 840 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a8: 0x8008c08e -> 0x00000000 Debug: 841 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a3: 0x00003488 -> 0x00000000 Debug: 842 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a1: 0x3ffc0630 -> 0x00000000 Debug: 843 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a0: 0x00000010 -> 0x00000000 Debug: 844 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ccount: 0x0001226d -> 0x00000004 Debug: 845 20561 xtensa.c:2281 xtensa_wait_algorithm(): Skip restoring register debugcause: 0x00000008 -> 0x00000020 Debug: 846 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register eps6: 0x00060035 -> 0x0000001f Debug: 847 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register depc: 0x0000348d -> 0x00000000 Debug: 848 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register epc6: 0x400003c0 -> 0x40000400 Debug: 849 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register epc1: 0x40092a84 -> 0x00000000 Debug: 850 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ps: 0x00060035 -> 0x0000001f Debug: 851 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register configid0: 0x400003c0 -> 0x40000400 Debug: 852 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register windowstart: 0x00000555 -> 0x00000001 Debug: 853 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register windowbase: 0x0000000a -> 0x00000000 Debug: 854 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register sar: 0x0000001c -> 0x00000000 Debug: 855 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar50: 0xfffffffd -> 0x00000000 Debug: 856 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar49: 0x00000001 -> 0x00000000 Debug: 857 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar48: 0x8008c08e -> 0x00000000 Debug: 858 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar43: 0x00003488 -> 0x00000000 Debug: 859 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar41: 0x3ffc0630 -> 0x00000000 Debug: 860 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar40: 0x00000010 -> 0x00000000 Debug: 861 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar37: 0x00000018 -> 0x00000000 Debug: 862 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar35: 0x00000004 -> 0x00000000 Debug: 863 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar34: 0x00000066 -> 0x00000000 Debug: 864 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar33: 0x3ffc0750 -> 0x00000000 Debug: 865 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar32: 0x800041be -> 0x00000000 Debug: 866 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar29: 0x00000018 -> 0x00000000 Debug: 867 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar27: 0x00000004 -> 0x00000000 Debug: 868 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar26: 0x00000066 -> 0x00000000 Debug: 869 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar25: 0x3ffc0780 -> 0x00000000 Debug: 870 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar24: 0x800911ec -> 0x00000000 Debug: 871 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar23: 0x1c492000 -> 0x00000000 Debug: 872 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar22: 0x000001e0 -> 0x00000000 Debug: 873 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar21: 0x000000f0 -> 0x00000000 Debug: 874 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar20: 0x00000028 -> 0x00000000 Debug: 875 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar19: 0x000000f0 -> 0x00000000 Debug: 876 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar18: 0x000000f0 -> 0x00000000 Debug: 877 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar17: 0x3ffc07a0 -> 0x00000000 Debug: 878 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar16: 0x800925b6 -> 0x00000000 Debug: 879 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar15: 0x00000005 -> 0x00000000 Debug: 880 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar11: 0x00000090 -> 0x00000000 Debug: 881 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar10: 0x3ffc0880 -> 0x00000000 Debug: 882 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar9: 0x3ffc0820 -> 0x00000000 Debug: 883 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar8: 0x80092aec -> 0x00000000 Debug: 884 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar4: 0x3ffc08ec -> 0x00000000 Debug: 885 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar3: 0xffffffff -> 0x00000000 Debug: 886 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar2: 0x00000005 -> 0x00000000 Debug: 887 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar1: 0x3ffc08d0 -> 0x00000000 Debug: 888 20561 xtensa.c:2291 xtensa_wait_algorithm(): restoring register pc: 0x400003c0 -> 0x40000400 Debug: 889 20561 xtensa.c:512 xtensa_write_dirty_registers(): esp32.cpu0: start Debug: 890 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg pc val 40000400 Debug: 891 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg sar val 00000000 Debug: 892 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowbase val 00000000 Debug: 893 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowstart val 00000001 Debug: 894 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg configid0 val 40000400 Debug: 895 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ps val 0000001F Debug: 896 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg epc1 val 00000000 Debug: 897 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg epc6 val 40000400 Debug: 898 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg depc val 00000000 Debug: 899 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg eps6 val 0000001F Debug: 900 20561 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ccount val 00000004 Debug: 901 20561 xtensa.c:648 xtensa_queue_write_dirty_user_regs_u32(): esp32.cpu0: start Debug: 902 20561 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a0 value 00000000, num =1 Debug: 903 20561 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a1 value 00000000, num =2 Debug: 904 20561 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a3 value 00000000, num =4 Debug: 905 20561 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a8 value 00000000, num =9 Debug: 906 20561 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a9 value 00000000, num =10 Debug: 907 20562 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a10 value 00000000, num =11 Debug: 908 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar1 value 00000000, num =1 Debug: 909 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar2 value 00000000, num =2 Debug: 910 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar3 value 00000000, num =3 Debug: 911 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar4 value 00000000, num =4 Debug: 912 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar8 value 00000000, num =8 Debug: 913 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar9 value 00000000, num =9 Debug: 914 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar10 value 00000000, num =10 Debug: 915 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar11 value 00000000, num =11 Debug: 916 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar15 value 00000000, num =15 Debug: 917 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar16 value 00000000, num =16 Debug: 918 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar17 value 00000000, num =17 Debug: 919 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar18 value 00000000, num =18 Debug: 920 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar19 value 00000000, num =19 Debug: 921 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar20 value 00000000, num =20 Debug: 922 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar21 value 00000000, num =21 Debug: 923 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar22 value 00000000, num =22 Debug: 924 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar23 value 00000000, num =23 Debug: 925 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar24 value 00000000, num =24 Debug: 926 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar25 value 00000000, num =25 Debug: 927 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar26 value 00000000, num =26 Debug: 928 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar27 value 00000000, num =27 Debug: 929 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar29 value 00000000, num =29 Debug: 930 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar32 value 00000000, num =32 Debug: 931 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar33 value 00000000, num =33 Debug: 932 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar34 value 00000000, num =34 Debug: 933 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar35 value 00000000, num =35 Debug: 934 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar37 value 00000000, num =37 Debug: 935 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar40 value 00000000, num =40 Debug: 936 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar41 value 00000000, num =41 Debug: 937 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar43 value 00000000, num =43 Debug: 938 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar48 value 00000000, num =48 Debug: 939 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar49 value 00000000, num =49 Debug: 940 20562 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar50 value 00000000, num =50 Debug: 941 20563 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 942 20563 algorithm.c:274 algorithm_run(): Got algorithm RC 0x0 Debug: 943 20563 target.c:2185 target_free_working_area_restore(): freed 28 bytes of working area at address 0x3ffc08ec Debug: 944 20563 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 945 20563 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffc08eb (1300 bytes) Debug: 946 20563 target.c:1964 print_wa_layout(): 0x3ffc08ec-0x3ffd7fff (96020 bytes) Debug: 947 20563 target.c:2185 target_free_working_area_restore(): freed 28 bytes of working area at address 0x40092ad8 Debug: 948 20563 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 949 20563 target.c:1964 print_wa_layout(): 0x40092ad8-0x40093fff (5416 bytes) Debug: 950 20563 target.c:2185 target_free_working_area_restore(): freed 1300 bytes of working area at address 0x3ffc03d8 Debug: 951 20563 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 952 20563 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffd7fff (97320 bytes) Debug: 953 20563 target.c:2185 target_free_working_area_restore(): freed 10968 bytes of working area at address 0x40090000 Debug: 954 20563 target.c:1964 print_wa_layout(): 0x40090000-0x40093fff (16384 bytes) Debug: 955 20563 target.c:2185 target_free_working_area_restore(): freed 984 bytes of working area at address 0x3ffc0000 Debug: 956 20563 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffd7fff (98304 bytes) Debug: 957 20563 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x30000 clear=0x600000 Debug: 958 20563 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu0: set smpbreak=30000, state=2 Warn : 959 20563 esp_flash.c:396 esp_flash_get_mappings(): Empty flash mapping! Warn : 960 20563 esp_flash.c:941 esp_flash_probe(): Failed to get flash mappings (0)! Debug: 961 20563 esp_flash.c:242 esp_flasher_algorithm_init(): base=00000000 set=0 Debug: 962 20563 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 963 20563 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x0 clear=0x630000 Debug: 964 20563 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu0: set smpbreak=0, state=2 Debug: 965 20563 algorithm.c:339 algorithm_load_func_image(): stub: base 0x0, start 0x40092584, 2 sections Debug: 966 20563 algorithm.c:346 algorithm_load_func_image(): addr 0x00000000, sz 10967, flags 1 Debug: 967 20563 target.c:2097 alloc_working_area_try_do(): allocated new working area of 10968 bytes at address 0x40090000 Debug: 968 20563 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 969 20563 target.c:1964 print_wa_layout(): 0x40092ad8-0x40093fff (5416 bytes) Debug: 970 20563 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090000 Debug: 971 20566 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 972 20566 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090200 Debug: 973 20568 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 974 20568 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090400 Debug: 975 20570 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 976 20570 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090600 Debug: 977 20573 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 978 20573 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090800 Debug: 979 20575 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 980 20575 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090a00 Debug: 981 20578 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 982 20578 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090c00 Debug: 983 20580 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 984 20580 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090e00 Debug: 985 20582 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 986 20582 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091000 Debug: 987 20585 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 988 20585 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091200 Debug: 989 20587 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 990 20587 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091400 Debug: 991 20589 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 992 20590 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091600 Debug: 993 20592 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 994 20592 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091800 Debug: 995 20594 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 996 20594 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091a00 Debug: 997 20597 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 998 20597 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091c00 Debug: 999 20599 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1000 20599 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091e00 Debug: 1001 20602 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1002 20602 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092000 Debug: 1003 20604 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1004 20604 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092200 Debug: 1005 20607 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1006 20607 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092400 Debug: 1007 20609 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1008 20609 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092600 Debug: 1009 20611 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1010 20611 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092800 Debug: 1011 20614 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1012 20614 target.c:2445 target_write_buffer(): writing buffer of 215 byte at 0x40092a00 Debug: 1013 20614 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1014 20615 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1015 20615 algorithm.c:346 algorithm_load_func_image(): addr 0x00000000, sz 928, flags 0 Debug: 1016 20615 algorithm.c:376 algorithm_load_func_image(): DATA sec size 928 -> 928 Debug: 1017 20615 algorithm.c:379 algorithm_load_func_image(): BSS sec size 53 -> 56 Debug: 1018 20615 target.c:2097 alloc_working_area_try_do(): allocated new working area of 984 bytes at address 0x3ffc0000 Debug: 1019 20615 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 1020 20615 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffd7fff (97320 bytes) Debug: 1021 20615 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x3ffc0000 Debug: 1022 20618 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1023 20618 target.c:2445 target_write_buffer(): writing buffer of 416 byte at 0x3ffc0200 Debug: 1024 20620 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1025 20620 target.c:2097 alloc_working_area_try_do(): allocated new working area of 1024 bytes at address 0x3ffc03d8 Debug: 1026 20620 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 1027 20620 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffc07d7 (1024 bytes) Debug: 1028 20620 target.c:1964 print_wa_layout(): 0x3ffc07d8-0x3ffd7fff (96296 bytes) Debug: 1029 20620 target.c:2097 alloc_working_area_try_do(): allocated new working area of 28 bytes at address 0x40092ad8 Debug: 1030 20620 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 1031 20620 target.c:1964 print_wa_layout(): 0x40092ad8-0x40092af3 (28 bytes) Debug: 1032 20620 target.c:1964 print_wa_layout(): 0x40092af4-0x40093fff (5388 bytes) Debug: 1033 20620 target.c:2445 target_write_buffer(): writing buffer of 28 byte at 0x40092ad8 Debug: 1034 20620 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1035 20620 algorithm.c:462 algorithm_load_func_image(): Stub loaded in 56.849 ms Debug: 1036 20620 xtensa_algorithm.c:112 xtensa_algo_init(): reg params count 7 (6/1). Debug: 1037 20620 xtensa_algorithm.c:59 xtensa_algo_regs_init_start(): Check stack addr 0x3ffc07d8 Debug: 1038 20620 xtensa_algorithm.c:62 xtensa_algo_regs_init_start(): Adjust stack addr to 0x3ffc07d0 Debug: 1039 20620 xtensa_algorithm.c:127 xtensa_algo_init(): Set arg[0] = 4 (a2) Debug: 1040 20620 algorithm.c:224 algorithm_run(): Algorithm start @ 0x40092ad8, stack 1024 bytes @ 0x3ffc07d8 Debug: 1041 20620 xtensa.c:1251 xtensa_resume(): esp32.cpu0 Debug: 1042 20620 xtensa.c:1180 xtensa_prepare_resume(): esp32.cpu0: current=0 address=0x40092ad8, handle_breakpoints=1, debug_execution=1) Debug: 1043 20620 xtensa.c:512 xtensa_write_dirty_registers(): esp32.cpu0: start Debug: 1044 20620 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg pc val 40092AD8 Debug: 1045 20620 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowbase val 00000000 Debug: 1046 20620 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowstart val 00000001 Debug: 1047 20620 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ps val 00060025 Debug: 1048 20620 xtensa.c:648 xtensa_queue_write_dirty_user_regs_u32(): esp32.cpu0: start Debug: 1049 20620 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a0 value 00000000, num =1 Debug: 1050 20620 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a1 value 3FFC07C0, num =2 Debug: 1051 20620 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a2 value 00000004, num =3 Debug: 1052 20620 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a3 value 00000000, num =4 Debug: 1053 20620 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a8 value 40092584, num =9 Debug: 1054 20620 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1055 20620 xtensa.c:1233 xtensa_do_resume(): esp32.cpu0: start Debug: 1056 20621 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1057 20621 target.c:1849 target_call_event_callbacks(): target event 2 (resumed) for core esp32.cpu0 Debug: 1058 20621 esp32.c:523 esp32_handle_target_event(): 2 Debug: 1059 20621 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 2 Debug: 1060 20621 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 2 Debug: 1061 20621 xtensa.c:2447 xtensa_handle_target_event(): 2 Debug: 1062 20621 algorithm.c:246 algorithm_run(): Wait algorithm completion Debug: 1063 20621 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu0: start Debug: 1064 20624 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1065 20627 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1066 20627 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1067 20627 xtensa.c:1858 xtensa_poll(): esp32.cpu0: Target halted, pc=0x400003C0, debug_reason=00000001, oldstate=00000004 Debug: 1068 20627 xtensa.c:1863 xtensa_poll(): esp32.cpu0: Halt reason=0x00000008, exc_cause=0, dsr=0x8080cc11 Info : 1069 20627 xtensa.c:1866 xtensa_poll(): esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Debug: 1070 20628 esp_xtensa_smp.c:257 esp_xtensa_smp_update_halt_gdb(): GDB target 'esp32.cpu0' Debug: 1071 20628 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu0' Debug: 1072 20628 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu1' Debug: 1073 20628 esp_xtensa_smp.c:314 esp_xtensa_smp_update_halt_gdb(): exit Debug: 1074 20628 target.c:1849 target_call_event_callbacks(): target event 17 (debug-halted) for core esp32.cpu0 Debug: 1075 20628 esp32.c:523 esp32_handle_target_event(): 17 Debug: 1076 20628 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 17 Debug: 1077 20628 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 17 Debug: 1078 20628 xtensa.c:2447 xtensa_handle_target_event(): 17 Debug: 1079 20628 xtensa.c:2260 xtensa_wait_algorithm(): Read mem params Debug: 1080 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a10: 0xfffffffd -> 0x00000000 Debug: 1081 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a9: 0x00000001 -> 0x00000000 Debug: 1082 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a8: 0x8008c08e -> 0x00000000 Debug: 1083 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a3: 0x00003488 -> 0x00000000 Debug: 1084 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a1: 0x3ffc0520 -> 0x00000000 Debug: 1085 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a0: 0x00000010 -> 0x00000000 Debug: 1086 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ccount: 0x00000595 -> 0x00000004 Debug: 1087 20628 xtensa.c:2281 xtensa_wait_algorithm(): Skip restoring register debugcause: 0x00000008 -> 0x00000020 Debug: 1088 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register eps6: 0x00060035 -> 0x0000001f Debug: 1089 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register depc: 0x0000348d -> 0x00000000 Debug: 1090 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register epc6: 0x400003c0 -> 0x40000400 Debug: 1091 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register epc1: 0x40092a84 -> 0x00000000 Debug: 1092 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ps: 0x00060035 -> 0x0000001f Debug: 1093 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register configid0: 0x400003c0 -> 0x40000400 Debug: 1094 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register windowstart: 0x00000555 -> 0x00000001 Debug: 1095 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register windowbase: 0x0000000a -> 0x00000000 Debug: 1096 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar50: 0xfffffffd -> 0x00000000 Debug: 1097 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar49: 0x00000001 -> 0x00000000 Debug: 1098 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar48: 0x8008c08e -> 0x00000000 Debug: 1099 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar43: 0x00003488 -> 0x00000000 Debug: 1100 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar41: 0x3ffc0520 -> 0x00000000 Debug: 1101 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar40: 0x00000010 -> 0x00000000 Debug: 1102 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar37: 0x00000018 -> 0x00000000 Debug: 1103 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar35: 0x00000004 -> 0x00000000 Debug: 1104 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar34: 0x00000066 -> 0x00000000 Debug: 1105 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar33: 0x3ffc0640 -> 0x00000000 Debug: 1106 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar32: 0x800041be -> 0x00000000 Debug: 1107 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar29: 0x00000018 -> 0x00000000 Debug: 1108 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar27: 0x00000004 -> 0x00000000 Debug: 1109 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar26: 0x00000066 -> 0x00000000 Debug: 1110 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar25: 0x3ffc0670 -> 0x00000000 Debug: 1111 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar24: 0x800911ec -> 0x00000000 Debug: 1112 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar23: 0x1c492000 -> 0x00000000 Debug: 1113 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar22: 0x000001e0 -> 0x00000000 Debug: 1114 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar21: 0x000000f0 -> 0x00000000 Debug: 1115 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar20: 0x00000028 -> 0x00000000 Debug: 1116 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar19: 0x000000f0 -> 0x00000000 Debug: 1117 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar18: 0x000000f0 -> 0x00000000 Debug: 1118 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar17: 0x3ffc0690 -> 0x00000000 Debug: 1119 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar16: 0x800925b6 -> 0x00000000 Debug: 1120 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar15: 0x00000004 -> 0x00000000 Debug: 1121 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar11: 0x00000090 -> 0x00000000 Debug: 1122 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar10: 0x3ffc0770 -> 0x00000000 Debug: 1123 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar9: 0x3ffc0710 -> 0x00000000 Debug: 1124 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar8: 0x80092aec -> 0x00000000 Debug: 1125 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar2: 0x00000004 -> 0x00000000 Debug: 1126 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar1: 0x3ffc07c0 -> 0x00000000 Debug: 1127 20628 xtensa.c:2291 xtensa_wait_algorithm(): restoring register pc: 0x400003c0 -> 0x40000400 Debug: 1128 20628 xtensa.c:512 xtensa_write_dirty_registers(): esp32.cpu0: start Debug: 1129 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg pc val 40000400 Debug: 1130 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowbase val 00000000 Debug: 1131 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowstart val 00000001 Debug: 1132 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg configid0 val 40000400 Debug: 1133 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ps val 0000001F Debug: 1134 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg epc1 val 00000000 Debug: 1135 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg epc6 val 40000400 Debug: 1136 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg depc val 00000000 Debug: 1137 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg eps6 val 0000001F Debug: 1138 20628 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ccount val 00000004 Debug: 1139 20628 xtensa.c:648 xtensa_queue_write_dirty_user_regs_u32(): esp32.cpu0: start Debug: 1140 20628 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a0 value 00000000, num =1 Debug: 1141 20628 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a1 value 00000000, num =2 Debug: 1142 20628 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a3 value 00000000, num =4 Debug: 1143 20628 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a8 value 00000000, num =9 Debug: 1144 20628 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a9 value 00000000, num =10 Debug: 1145 20628 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a10 value 00000000, num =11 Debug: 1146 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar1 value 00000000, num =1 Debug: 1147 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar2 value 00000000, num =2 Debug: 1148 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar8 value 00000000, num =8 Debug: 1149 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar9 value 00000000, num =9 Debug: 1150 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar10 value 00000000, num =10 Debug: 1151 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar11 value 00000000, num =11 Debug: 1152 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar15 value 00000000, num =15 Debug: 1153 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar16 value 00000000, num =16 Debug: 1154 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar17 value 00000000, num =17 Debug: 1155 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar18 value 00000000, num =18 Debug: 1156 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar19 value 00000000, num =19 Debug: 1157 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar20 value 00000000, num =20 Debug: 1158 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar21 value 00000000, num =21 Debug: 1159 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar22 value 00000000, num =22 Debug: 1160 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar23 value 00000000, num =23 Debug: 1161 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar24 value 00000000, num =24 Debug: 1162 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar25 value 00000000, num =25 Debug: 1163 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar26 value 00000000, num =26 Debug: 1164 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar27 value 00000000, num =27 Debug: 1165 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar29 value 00000000, num =29 Debug: 1166 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar32 value 00000000, num =32 Debug: 1167 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar33 value 00000000, num =33 Debug: 1168 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar34 value 00000000, num =34 Debug: 1169 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar35 value 00000000, num =35 Debug: 1170 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar37 value 00000000, num =37 Debug: 1171 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar40 value 00000000, num =40 Debug: 1172 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar41 value 00000000, num =41 Debug: 1173 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar43 value 00000000, num =43 Debug: 1174 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar48 value 00000000, num =48 Debug: 1175 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar49 value 00000000, num =49 Debug: 1176 20628 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar50 value 00000000, num =50 Debug: 1177 20629 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1178 20629 algorithm.c:274 algorithm_run(): Got algorithm RC 0x0 Debug: 1179 20629 target.c:2185 target_free_working_area_restore(): freed 28 bytes of working area at address 0x40092ad8 Debug: 1180 20629 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 1181 20629 target.c:1964 print_wa_layout(): 0x40092ad8-0x40093fff (5416 bytes) Debug: 1182 20629 target.c:2185 target_free_working_area_restore(): freed 1024 bytes of working area at address 0x3ffc03d8 Debug: 1183 20629 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 1184 20629 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffd7fff (97320 bytes) Debug: 1185 20629 target.c:2185 target_free_working_area_restore(): freed 10968 bytes of working area at address 0x40090000 Debug: 1186 20629 target.c:1964 print_wa_layout(): 0x40090000-0x40093fff (16384 bytes) Debug: 1187 20629 target.c:2185 target_free_working_area_restore(): freed 984 bytes of working area at address 0x3ffc0000 Debug: 1188 20629 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffd7fff (98304 bytes) Debug: 1189 20629 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x30000 clear=0x600000 Debug: 1190 20630 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu0: set smpbreak=30000, state=2 Error: 1191 20630 esp_flash.c:345 esp_flash_get_size(): Failed to get flash size! Debug: 1192 20630 esp_flash.c:346 esp_flash_get_size(): esp_flash_get_size size 0x0 Debug: 1193 20630 esp_flash.c:242 esp_flasher_algorithm_init(): base=00000000 set=0 Debug: 1194 20630 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1195 20630 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x0 clear=0x630000 Debug: 1196 20630 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu0: set smpbreak=0, state=2 Debug: 1197 20630 algorithm.c:339 algorithm_load_func_image(): stub: base 0x0, start 0x40092584, 2 sections Debug: 1198 20630 algorithm.c:346 algorithm_load_func_image(): addr 0x00000000, sz 10967, flags 1 Debug: 1199 20630 target.c:2097 alloc_working_area_try_do(): allocated new working area of 10968 bytes at address 0x40090000 Debug: 1200 20630 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 1201 20630 target.c:1964 print_wa_layout(): 0x40092ad8-0x40093fff (5416 bytes) Debug: 1202 20630 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090000 Debug: 1203 20632 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1204 20632 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090200 Debug: 1205 20635 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1206 20635 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090400 Debug: 1207 20637 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1208 20637 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090600 Debug: 1209 20639 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1210 20639 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090800 Debug: 1211 20642 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1212 20642 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090a00 Debug: 1213 20644 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1214 20644 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090c00 Debug: 1215 20647 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1216 20647 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40090e00 Debug: 1217 20649 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1218 20649 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091000 Debug: 1219 20652 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1220 20652 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091200 Debug: 1221 20654 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1222 20654 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091400 Debug: 1223 20657 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1224 20657 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091600 Debug: 1225 20659 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1226 20659 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091800 Debug: 1227 20662 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1228 20662 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091a00 Debug: 1229 20664 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1230 20664 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091c00 Debug: 1231 20667 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1232 20667 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40091e00 Debug: 1233 20669 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1234 20669 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092000 Debug: 1235 20671 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1236 20671 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092200 Debug: 1237 20674 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1238 20674 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092400 Debug: 1239 20676 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1240 20676 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092600 Debug: 1241 20679 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1242 20679 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x40092800 Debug: 1243 20681 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1244 20681 target.c:2445 target_write_buffer(): writing buffer of 215 byte at 0x40092a00 Debug: 1245 20681 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1246 20682 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1247 20682 algorithm.c:346 algorithm_load_func_image(): addr 0x00000000, sz 928, flags 0 Debug: 1248 20682 algorithm.c:376 algorithm_load_func_image(): DATA sec size 928 -> 928 Debug: 1249 20682 algorithm.c:379 algorithm_load_func_image(): BSS sec size 53 -> 56 Debug: 1250 20682 target.c:2097 alloc_working_area_try_do(): allocated new working area of 984 bytes at address 0x3ffc0000 Debug: 1251 20682 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 1252 20683 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffd7fff (97320 bytes) Debug: 1253 20683 target.c:2445 target_write_buffer(): writing buffer of 512 byte at 0x3ffc0000 Debug: 1254 20685 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1255 20685 target.c:2445 target_write_buffer(): writing buffer of 416 byte at 0x3ffc0200 Debug: 1256 20687 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1257 20687 target.c:2097 alloc_working_area_try_do(): allocated new working area of 1024 bytes at address 0x3ffc03d8 Debug: 1258 20687 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 1259 20687 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffc07d7 (1024 bytes) Debug: 1260 20687 target.c:1964 print_wa_layout(): 0x3ffc07d8-0x3ffd7fff (96296 bytes) Debug: 1261 20687 target.c:2097 alloc_working_area_try_do(): allocated new working area of 28 bytes at address 0x40092ad8 Debug: 1262 20687 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 1263 20687 target.c:1964 print_wa_layout(): 0x40092ad8-0x40092af3 (28 bytes) Debug: 1264 20687 target.c:1964 print_wa_layout(): 0x40092af4-0x40093fff (5388 bytes) Debug: 1265 20687 target.c:2445 target_write_buffer(): writing buffer of 28 byte at 0x40092ad8 Debug: 1266 20687 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1267 20687 algorithm.c:462 algorithm_load_func_image(): Stub loaded in 56.849 ms Debug: 1268 20687 xtensa_algorithm.c:112 xtensa_algo_init(): reg params count 7 (6/1). Debug: 1269 20687 xtensa_algorithm.c:59 xtensa_algo_regs_init_start(): Check stack addr 0x3ffc07d8 Debug: 1270 20687 xtensa_algorithm.c:62 xtensa_algo_regs_init_start(): Adjust stack addr to 0x3ffc07d0 Debug: 1271 20687 xtensa_algorithm.c:127 xtensa_algo_init(): Set arg[0] = 4 (a2) Debug: 1272 20687 algorithm.c:224 algorithm_run(): Algorithm start @ 0x40092ad8, stack 1024 bytes @ 0x3ffc07d8 Debug: 1273 20687 xtensa.c:1251 xtensa_resume(): esp32.cpu0 Debug: 1274 20687 xtensa.c:1180 xtensa_prepare_resume(): esp32.cpu0: current=0 address=0x40092ad8, handle_breakpoints=1, debug_execution=1) Debug: 1275 20687 xtensa.c:512 xtensa_write_dirty_registers(): esp32.cpu0: start Debug: 1276 20687 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg pc val 40092AD8 Debug: 1277 20687 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowbase val 00000000 Debug: 1278 20687 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowstart val 00000001 Debug: 1279 20687 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ps val 00060025 Debug: 1280 20687 xtensa.c:648 xtensa_queue_write_dirty_user_regs_u32(): esp32.cpu0: start Debug: 1281 20687 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a0 value 00000000, num =1 Debug: 1282 20687 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a1 value 3FFC07C0, num =2 Debug: 1283 20687 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a2 value 00000004, num =3 Debug: 1284 20687 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a3 value 00000000, num =4 Debug: 1285 20687 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a8 value 40092584, num =9 Debug: 1286 20688 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1287 20688 xtensa.c:1233 xtensa_do_resume(): esp32.cpu0: start Debug: 1288 20688 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1289 20688 target.c:1849 target_call_event_callbacks(): target event 2 (resumed) for core esp32.cpu0 Debug: 1290 20688 esp32.c:523 esp32_handle_target_event(): 2 Debug: 1291 20688 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 2 Debug: 1292 20688 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 2 Debug: 1293 20688 xtensa.c:2447 xtensa_handle_target_event(): 2 Debug: 1294 20688 algorithm.c:246 algorithm_run(): Wait algorithm completion Debug: 1295 20688 xtensa.c:890 xtensa_fetch_all_regs(): esp32.cpu0: start Debug: 1296 20690 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1297 20694 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1298 20694 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1299 20694 xtensa.c:1858 xtensa_poll(): esp32.cpu0: Target halted, pc=0x400003C0, debug_reason=00000001, oldstate=00000004 Debug: 1300 20694 xtensa.c:1863 xtensa_poll(): esp32.cpu0: Halt reason=0x00000008, exc_cause=0, dsr=0x8080cc11 Info : 1301 20694 xtensa.c:1866 xtensa_poll(): esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Debug: 1302 20695 esp_xtensa_smp.c:257 esp_xtensa_smp_update_halt_gdb(): GDB target 'esp32.cpu0' Debug: 1303 20695 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu0' Debug: 1304 20695 esp_xtensa_smp.c:271 esp_xtensa_smp_update_halt_gdb(): Check target 'esp32.cpu1' Debug: 1305 20695 esp_xtensa_smp.c:314 esp_xtensa_smp_update_halt_gdb(): exit Debug: 1306 20695 target.c:1849 target_call_event_callbacks(): target event 17 (debug-halted) for core esp32.cpu0 Debug: 1307 20695 esp32.c:523 esp32_handle_target_event(): 17 Debug: 1308 20695 esp_xtensa_smp.c:610 esp_xtensa_smp_handle_target_event(): 17 Debug: 1309 20695 esp_xtensa.c:79 esp_xtensa_handle_target_event(): 17 Debug: 1310 20695 xtensa.c:2447 xtensa_handle_target_event(): 17 Debug: 1311 20695 xtensa.c:2260 xtensa_wait_algorithm(): Read mem params Debug: 1312 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a10: 0xfffffffd -> 0x00000000 Debug: 1313 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a9: 0x00000001 -> 0x00000000 Debug: 1314 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a8: 0x8008c08e -> 0x00000000 Debug: 1315 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a3: 0x00003488 -> 0x00000000 Debug: 1316 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a1: 0x3ffc0520 -> 0x00000000 Debug: 1317 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register a0: 0x00000010 -> 0x00000000 Debug: 1318 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ccount: 0x00000596 -> 0x00000004 Debug: 1319 20695 xtensa.c:2281 xtensa_wait_algorithm(): Skip restoring register debugcause: 0x00000008 -> 0x00000020 Debug: 1320 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register eps6: 0x00060035 -> 0x0000001f Debug: 1321 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register depc: 0x0000348d -> 0x00000000 Debug: 1322 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register epc6: 0x400003c0 -> 0x40000400 Debug: 1323 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register epc1: 0x40092a84 -> 0x00000000 Debug: 1324 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ps: 0x00060035 -> 0x0000001f Debug: 1325 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register configid0: 0x400003c0 -> 0x40000400 Debug: 1326 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register windowstart: 0x00000555 -> 0x00000001 Debug: 1327 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register windowbase: 0x0000000a -> 0x00000000 Debug: 1328 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar50: 0xfffffffd -> 0x00000000 Debug: 1329 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar49: 0x00000001 -> 0x00000000 Debug: 1330 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar48: 0x8008c08e -> 0x00000000 Debug: 1331 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar43: 0x00003488 -> 0x00000000 Debug: 1332 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar41: 0x3ffc0520 -> 0x00000000 Debug: 1333 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar40: 0x00000010 -> 0x00000000 Debug: 1334 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar37: 0x00000018 -> 0x00000000 Debug: 1335 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar35: 0x00000004 -> 0x00000000 Debug: 1336 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar34: 0x00000066 -> 0x00000000 Debug: 1337 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar33: 0x3ffc0640 -> 0x00000000 Debug: 1338 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar32: 0x800041be -> 0x00000000 Debug: 1339 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar29: 0x00000018 -> 0x00000000 Debug: 1340 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar27: 0x00000004 -> 0x00000000 Debug: 1341 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar26: 0x00000066 -> 0x00000000 Debug: 1342 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar25: 0x3ffc0670 -> 0x00000000 Debug: 1343 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar24: 0x800911ec -> 0x00000000 Debug: 1344 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar23: 0x1c492000 -> 0x00000000 Debug: 1345 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar22: 0x000001e0 -> 0x00000000 Debug: 1346 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar21: 0x000000f0 -> 0x00000000 Debug: 1347 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar20: 0x00000028 -> 0x00000000 Debug: 1348 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar19: 0x000000f0 -> 0x00000000 Debug: 1349 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar18: 0x000000f0 -> 0x00000000 Debug: 1350 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar17: 0x3ffc0690 -> 0x00000000 Debug: 1351 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar16: 0x800925b6 -> 0x00000000 Debug: 1352 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar15: 0x00000004 -> 0x00000000 Debug: 1353 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar11: 0x00000090 -> 0x00000000 Debug: 1354 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar10: 0x3ffc0770 -> 0x00000000 Debug: 1355 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar9: 0x3ffc0710 -> 0x00000000 Debug: 1356 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar8: 0x80092aec -> 0x00000000 Debug: 1357 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar2: 0x00000004 -> 0x00000000 Debug: 1358 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register ar1: 0x3ffc07c0 -> 0x00000000 Debug: 1359 20695 xtensa.c:2291 xtensa_wait_algorithm(): restoring register pc: 0x400003c0 -> 0x40000400 Debug: 1360 20695 xtensa.c:512 xtensa_write_dirty_registers(): esp32.cpu0: start Debug: 1361 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg pc val 40000400 Debug: 1362 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowbase val 00000000 Debug: 1363 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg windowstart val 00000001 Debug: 1364 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg configid0 val 40000400 Debug: 1365 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ps val 0000001F Debug: 1366 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg epc1 val 00000000 Debug: 1367 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg epc6 val 40000400 Debug: 1368 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg depc val 00000000 Debug: 1369 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg eps6 val 0000001F Debug: 1370 20695 xtensa.c:526 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ccount val 00000004 Debug: 1371 20695 xtensa.c:648 xtensa_queue_write_dirty_user_regs_u32(): esp32.cpu0: start Debug: 1372 20695 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a0 value 00000000, num =1 Debug: 1373 20695 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a1 value 00000000, num =2 Debug: 1374 20695 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a3 value 00000000, num =4 Debug: 1375 20695 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a8 value 00000000, num =9 Debug: 1376 20695 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a9 value 00000000, num =10 Debug: 1377 20695 xtensa.c:591 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg a10 value 00000000, num =11 Debug: 1378 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar1 value 00000000, num =1 Debug: 1379 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar2 value 00000000, num =2 Debug: 1380 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar8 value 00000000, num =8 Debug: 1381 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar9 value 00000000, num =9 Debug: 1382 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar10 value 00000000, num =10 Debug: 1383 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar11 value 00000000, num =11 Debug: 1384 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar15 value 00000000, num =15 Debug: 1385 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar16 value 00000000, num =16 Debug: 1386 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar17 value 00000000, num =17 Debug: 1387 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar18 value 00000000, num =18 Debug: 1388 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar19 value 00000000, num =19 Debug: 1389 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar20 value 00000000, num =20 Debug: 1390 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar21 value 00000000, num =21 Debug: 1391 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar22 value 00000000, num =22 Debug: 1392 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar23 value 00000000, num =23 Debug: 1393 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar24 value 00000000, num =24 Debug: 1394 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar25 value 00000000, num =25 Debug: 1395 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar26 value 00000000, num =26 Debug: 1396 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar27 value 00000000, num =27 Debug: 1397 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar29 value 00000000, num =29 Debug: 1398 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar32 value 00000000, num =32 Debug: 1399 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar33 value 00000000, num =33 Debug: 1400 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar34 value 00000000, num =34 Debug: 1401 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar35 value 00000000, num =35 Debug: 1402 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar37 value 00000000, num =37 Debug: 1403 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar40 value 00000000, num =40 Debug: 1404 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar41 value 00000000, num =41 Debug: 1405 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar43 value 00000000, num =43 Debug: 1406 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar48 value 00000000, num =48 Debug: 1407 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar49 value 00000000, num =49 Debug: 1408 20695 xtensa.c:616 xtensa_write_dirty_registers(): esp32.cpu0: Writing back reg ar50 value 00000000, num =50 Debug: 1409 20697 xtensa.c:788 xtensa_core_status_check(): esp32.cpu0: DSR (8080CC11) Debug: 1410 20697 algorithm.c:274 algorithm_run(): Got algorithm RC 0x0 Debug: 1411 20697 target.c:2185 target_free_working_area_restore(): freed 28 bytes of working area at address 0x40092ad8 Debug: 1412 20697 target.c:1964 print_wa_layout(): 0x40090000-0x40092ad7 (10968 bytes) Debug: 1413 20697 target.c:1964 print_wa_layout(): 0x40092ad8-0x40093fff (5416 bytes) Debug: 1414 20697 target.c:2185 target_free_working_area_restore(): freed 1024 bytes of working area at address 0x3ffc03d8 Debug: 1415 20697 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffc03d7 (984 bytes) Debug: 1416 20697 target.c:1964 print_wa_layout(): 0x3ffc03d8-0x3ffd7fff (97320 bytes) Debug: 1417 20697 target.c:2185 target_free_working_area_restore(): freed 10968 bytes of working area at address 0x40090000 Debug: 1418 20697 target.c:1964 print_wa_layout(): 0x40090000-0x40093fff (16384 bytes) Debug: 1419 20697 target.c:2185 target_free_working_area_restore(): freed 984 bytes of working area at address 0x3ffc0000 Debug: 1420 20697 target.c:1964 print_wa_layout(): 0x3ffc0000-0x3ffd7fff (98304 bytes) Debug: 1421 20697 xtensa.c:726 xtensa_smpbreak_write(): esp32.cpu0: write smpbreak set=0x30000 clear=0x600000 Debug: 1422 20697 xtensa.c:744 xtensa_smpbreak_set(): esp32.cpu0: set smpbreak=30000, state=2 Error: 1423 20697 esp_flash.c:345 esp_flash_get_size(): Failed to get flash size! Debug: 1424 20697 esp_flash.c:346 esp_flash_get_size(): esp_flash_get_size size 0x0 Error: 1425 20697 esp_flash.c:981 esp_flash_probe(): Failed to probe flash, size 0 KB Error: 1426 20697 core.c:282 get_flash_bank_by_name(): auto_probe failed Error: 1427 20697 esp_flash.c:1290 esp_target_to_flash_bank(): Failed to find bank 'esp32.cpu0.flash'! Debug: 1428 20697 command.c:629 run_command(): Command 'esp compression' failed with error code -4 Debug: 1429 20697 command.c:146 script_debug(): command - echo Flashing Failed User : 1431 20698 command.c:769 jim_echo(): Flashing Failed User : 1432 20699 options.c:63 configuration_output_handler(): -1User : 1433 20699 options.c:63 configuration_output_handler(): Debug: 1434 28344 server.c:609 sig_handler(): Terminating on Signal 2 Debug: 1435 28451 command.c:146 script_debug(): command - shutdown User : 1437 28452 server.c:755 handle_shutdown_command(): shutdown command invoked Debug: 1438 28452 esp_xtensa.c:131 esp_xtensa_target_deinit(): start Debug: 1439 28452 xtensa.c:2533 xtensa_target_deinit(): start Debug: 1440 28452 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas Debug: 1441 28452 target.c:1964 print_wa_layout(): 0x40090000-0x40093fff (16384 bytes) Debug: 1442 28452 esp_xtensa.c:131 esp_xtensa_target_deinit(): start Debug: 1443 28452 xtensa.c:2533 xtensa_target_deinit(): start Debug: 1444 28452 target.c:2218 target_free_all_working_areas_restore(): freeing all working areas

gerekon commented 2 years ago

Hi @florenso 

Warn : Empty flash mapping!

What partitoin table do you use? Custom one? Also in your log I see that only partition table is flashed.

florenso commented 2 years ago

Hi @gerekon

I am using the "Single facotry app, no OTA" partition table, with an offset of 0x8000. MD5 checksum is enabled.

content of ./build/partition-table-flash-args : --flash_mode dio --flash_freq 40m --flash_size 2MB 0x8000 partition_table/partition-table.bin

i am not sure how to open the partition table itself. But the docs say:

ESP-IDF Partition Table Name Type SubType Offset Size Flags
nvs data nvs 0x9000 0x6000
phy_init data phy 0xf000 0x1000
factory app factory 0x10000 1M

ps: I did disable all logging, except for gpio pin 15. could that be the problem?

davidlehrian commented 2 years ago

I am getting this exact same error and am using the same idf version and openocd version but I'm using Eclipse. I can debug the Blink example app just fine but when I try to debug the BluFi example app I get this same error.

I did try unchecking the "Detect flash size when flashing bootloader" but that didn't change anything. I have the flash SPI mode set to QIO, 80 MHz and Flash Size 4 MB. Partition table is Single factory app, no OTA with offset of 0x8000.

esp-idf version 4.4 IDE Ecliipse \espressif\tools\openocd-esp32\v0.11.0-esp32-20211220\openocd-esp32\bin

Open On-Chip Debugger v0.11.0-esp32-20211220 (2021-12-20-15:43) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html adapter speed: 20000 kHz

Flashing C:/Users/lehrian/Documents/ESP32/BluFi/build/partition_table/partition-table.bin at 0x8000 Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling" Info : clock speed 20000 kHz Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. Info : starting gdb server for esp32.cpu0 on 3333 Info : Listening on port 3333 for gdb connections Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica), part: 0x2003, ver: 0x1) Info : esp32.cpu0: Target halted, PC=0x40140226, debug_reason=00000000 Info : Set GDB target to 'esp32.cpu0' Info : esp32.cpu1: Target halted, PC=0x40140226, debug_reason=00000000 Info : esp32.cpu0: Debug controller was reset. Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x500000CF, debug_reason=00000000 Info : esp32.cpu0: Core was reset. Info : esp32.cpu0: Target halted, PC=0x40000400, debug_reason=00000000 Info : esp32.cpu1: Debug controller was reset. Info : esp32.cpu1: Core was reset. Info : esp32.cpu1: Target halted, PC=0x40000400, debug_reason=00000000 Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Warn : Empty flash mapping! Warn : Failed to get flash mappings (0)! Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Error: Failed to get flash size! Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Error: Failed to get flash size! Error: Failed to probe flash, size 0 KB Error: auto_probe failed Error: Failed to find bank 'esp32.cpu0.flash'! Flashing Failed -1 Started by GNU MCU Eclipse Info : Listening on port 6666 for tcl connections Info : Listening on port 4444 for telnet connections Info : accepting 'gdb' connection on tcp/3333 Warn : No symbols for FreeRTOS! Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Warn : Empty flash mapping! Warn : Failed to get flash mappings (0)! Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Error: Failed to get flash size! Info : esp32.cpu0: Target halted, PC=0x400003C0, debug_reason=00000001 Error: Failed to get flash size! Error: Failed to probe flash, size 0 KB Error: auto_probe failed Error: Connect failed. Consider setting up a gdb-attach event for the target to prepare target for GDB connect, or use 'gdb_memory_map disable'. Error: attempted 'gdb' connection rejected shutdown command invoked

erhankur commented 2 years ago

Fixed in the https://github.com/espressif/openocd-esp32/releases/tag/v0.11.0-esp32-20220706