Open beped opened 4 years ago
Have the same issue, tried installing older versions but the issue still occured
No one to help us? Its the firmware maybe? i have downloaded from here like 5 different firmwares, same problem.
My setup:
none?
Still...
20:12:01.062 -> [ INFO ] Trying to setup RFID Hardware 20:12:01.165 -> [ INFO ] RFID SS_PIN: 5 and Gain Factor: 32 20:12:01.199 -> [ INFO ] MFRC522 Version: 0x0 (unknown) 20:12:01.234 -> [ WARN ] Communication failure, check if MFRC522 properly connected 20:12:01.302 -> [ INFO ] Trying to connect WiFi: HahaHaha 20:12:01.371 -> 20:12:01.371 -> [ INFO ] WiFi STA Connected 20:12:03.227 -> [ INFO ] Client IP address: 192.168.68.126 20:12:03.262 -> [ INFO ] Trying to setup NTP Server 20:12:03.296 -> [ INFO ] Configuration done.
Try to increase the gain to the max 48dB. It should work.
@sepalab already tryed that, didn`t work.
I have the same issue (red LED on but no scan) and no luck with the MFRC522 library DumpInfo example either. Either I didn't solder the pins right (3 times) or the board has a defect or both included tags don't work. Any advice to further troubleshoot welcome
I have the same issue (red LED on but no scan) and no luck with the MFRC522 library DumpInfo example either. Either I didn't solder the pins right (3 times) or the board has a defect or both included tags don't work. Any advice to further troubleshoot welcome
Have you find out how to make it work?
It seems the MFRC522 module was faulty, I got another one which works fine. One update: the blue keychain tags which come with the mfrc522 don't work.
It seems the MFRC522 module was faulty, I got another one which works fine. One update: the blue keychain tags which come with the mfrc522 don't work.
I have bought like 6 or 7 tags from different sellers here in Brazil. Always the same problem. But its allways the blue keychain and white card who came with the boards. Maybe is that?
For me the second mfrc522 reader worked with both white cards from the 2 sets I have.
I can reach the user page, the red lend on the RC522 its on. But when i aproach the tag nothing happen. I have double checked the wires and have tryed another board (W1 wemos mini and NodeMCU), same problem. Im using the 1.3.1 version. Any ideais what can it be?