Closed jheinitz closed 11 months ago
Ich habe den Wert auf 50% gestellt und der Ladevorgang startet auch mit 11kW. Allerdings endet der Ladevorgang nach 21s und startet auch nicht wieder.
Im Log ist nichts von einem Ladeplan zu sehen. Woran machst Du fest dass das hier irgendwas mit Ladeplanung zu tun hat?
Hier ist eher zu sehen, dass die Easee von sich aus mit laden beginnt was sich leider nicht verhindern lässt. Mit Ladeplanung hat das nichts zu tun.
@GrimmiMeloni das (Easee) ist allerdings maximal unschön:
[lp-1 ] DEBUG 2023/10/10 18:59:31 charge currents: [15.4 15.5 15.4]A
[lp-1 ] DEBUG 2023/10/10 18:59:31 charge total import: 5253.678kWh
[lp-1 ] DEBUG 2023/10/10 18:59:31 charger status: B
Ich habe den Wert auf 50% gestellt und der Ladevorgang startet auch mit 11kW. Allerdings endet der Ladevorgang nach 21s und startet auch nicht wieder.
Im Log ist nichts von einem Ladeplan zu sehen. Woran machst Du fest dass das hier irgendwas mit Ladeplanung zu tun hat?
Im UI ist der Balken rot und da steht auch etwas von "Minimalladen bis 50%" oder so ähnlich.
Oder so ähnlich?
Oder so ähnlich?
Ich hab's nicht auswendig gelernt... 😉
Aber der rote Balken ist doch eindeutig, oder?
@GrimmiMeloni das (Easee) ist allerdings maximal unschön:
[lp-1 ] DEBUG 2023/10/10 18:59:31 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 18:59:31 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:59:31 charger status: B
Ja, da ist was merkwürdiges passiert. Vielleicht ein Easee Schluckauf? @jheinitz Falls Du es reproduzieren kannst - ein Trace Log wäre (wie immer ;) ) super. Spannend wäre zusätzlich auch, was in so einem Moment in der Easee App angezeigt wird.
@GrimmiMeloni das (Easee) ist allerdings maximal unschön:
[lp-1 ] DEBUG 2023/10/10 18:59:31 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 18:59:31 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:59:31 charger status: B
Ja, da ist was merkwürdiges passiert. Vielleicht ein Easee Schluckauf? @jheinitz Falls Du es reproduzieren kannst - ein Trace Log wäre (wie immer ;) ) super. Spannend wäre zusätzlich auch, was in so einem Moment in der Easee App angezeigt wird.
Moin @GrimmiMeloni In der Easee App konnte ich sehen, dass das Auto mit 10,9kW geladen wurde. Und auch die Skoda app zeigte an, dass geladen wurde und auh der Soc des Enyaq stieg langsam aber stetig.
Werde es am Donnerstag nochmal versuchen zu reproduzieren.
Ich habe den Wert auf 50% gestellt und der Ladevorgang startet auch mit 11kW. Allerdings endet der Ladevorgang nach 21s und startet auch nicht wieder.
Im Log ist nichts von einem Ladeplan zu sehen. Woran machst Du fest dass das hier irgendwas mit Ladeplanung zu tun hat?
Moin @andig was für Meldungen müssten denn Deiner Meinung nach im Log auftauchen, wenn der Ladeplaner aktiv ist? Muss ich da noch etwas mehr DEBUG aktivieren?
Der rote Balken wäre minSoc. Da müsste IMMER geladen werden was zum Verhalten, aber nicht zum Log passt. Ich verstehe grad nur Bahnhof. Neuer Anlauf mit trace log wäre gut.
Der rote Balken wäre minSoc. Da müsste IMMER geladen werden was zum Verhalten, aber nicht zum Log passt. Ich verstehe grad nur Bahnhof.
Hi!
Ich beziehe mich auf diesen Blogeintrag auf den Abschnitt "Mindestladung über UI einstellbar" von @naltatis .
Was du mit minSoc meinst, ist das was man in der YAML Datei am vehicle
einstellen kann, oder?
Neuer Anlauf mit trace log wäre gut. Mach ich am Donnerstag.
Danke und bis dann.
Moin!
Ich habe das Ganze heute nochmal probiert und konnte das Verhalten vom ersten Mal nicht reproduzieren. Das Auto fing an zu laden und nachdem der Skoda Enyaq erkannt worden ist, wurde auch das Minimal Laden aktiviert.
Nach Erreichen von 50% wurde auf normalen PV Modus gewechselt. Dieser wiederum wurde dann ausgesetzt, weil kein PV Überschuss mehr vorhanden war. Im Log des Docker Containers war nichts vom Minimalen Laden zu sehen. Deshalb habe ich dafür mal das Logging eingebaut. Der PR dazu ist #10282
Ich mach das Ticket hier erstmal zu. Danke für die Hilfe.
Viele Grüße
Jens
Describe the bug
Moin!
Jetzt wo das Wetter schlechter wird und der Überschuss kaum ausreicht, um überhaupt 10% in das Auto zu laden, habe ich mal den Ladeplaner für die Ankunft ausprobiert. Ich habe den Wert auf 50% gestellt und der Ladevorgang startet auch mit 11kW. Allerdings endet der Ladevorgang nach 21s und startet auch nicht wieder. Allerdings zieht der Ladepunkt weiter knapp 11kW und das Auto wird auch geladen. Da der Ladezustand des Autos aufgrund des beendeten Ladevorgangs von evcc nicht mehr aktualisiert wird, wird der Ladevorgang auch nicht bei 50% beendet. Im evcc GUI wird weiter 32% angezeigt. Über die Skoda App konnte ich sehen, dass das Auto bereits auf 59% geladen worden ist. Ich beende den Vorgang in evcc durch Wechsel des Modus von PV auf Off.
Hat jemand eine Idee? Es ist bis jetzt nur eine Vermutung, dass es an dem Ankunfts-Ladeplaner liegt. Am Donnerstag könnte ich detaillierte Traces liefern. Meine Konfiguration und Auszüge aus dem Log habe ich hier angehängt.
Mein Setup
Danke und beste Grüße
Jens
Steps to reproduce
Configuration details
jens@server2:~$ cat evcc_0.120.3_planer_min_50pct_stoppt_nach_21s.log [main ] INFO 2023/10/10 17:26:35 evcc 0.120.3 [main ] INFO 2023/10/10 17:26:35 using config file: /etc/evcc.yaml [main ] INFO 2023/10/10 17:26:35 starting ui and api at :7070 [db ] INFO 2023/10/10 17:26:36 using sqlite database: /db/evcc.db [mqtt ] INFO 2023/10/10 17:26:36 connecting evcc at tcp://server2.example.com:1883 [mqtt ] DEBUG 2023/10/10 17:26:36 tcp://server2.example.com:1883 connected [site ] INFO 2023/10/10 17:26:51 site config: [site ] INFO 2023/10/10 17:26:51 meters: grid ✓ pv ✓ battery ✓ [site ] INFO 2023/10/10 17:26:51 grid: power ✓ energy ✓ currents ✓ [site ] INFO 2023/10/10 17:26:51 pv 1: power ✓ energy ✓ currents ✗ [site ] INFO 2023/10/10 17:26:51 battery 1: power ✓ energy ✗ currents ✗ soc ✓ capacity ✓ [site ] INFO 2023/10/10 17:26:51 vehicles: [site ] INFO 2023/10/10 17:26:51 vehicle 1: range ✓ finish ✓ status ✓ climate ✗ wakeup ✗ [lp-1 ] INFO 2023/10/10 17:26:51 loadpoint 1: [lp-1 ] INFO 2023/10/10 17:26:51 mode: pv [lp-1 ] INFO 2023/10/10 17:26:51 charger: power ✓ energy ✓ currents ✓ phases ✓ wakeup ✗ [lp-1 ] INFO 2023/10/10 17:26:51 meters: charge ✓ [lp-1 ] INFO 2023/10/10 17:26:51 charge: power ✓ energy ✓ currents ✓ [lp-1 ] DEBUG 2023/10/10 17:26:51 phase timer inactive [lp-1 ] DEBUG 2023/10/10 17:26:51 pv timer inactive [lp-1 ] DEBUG 2023/10/10 17:26:51 guard timer inactive [site ] WARN 2023/10/10 17:26:51 interval <30s can lead to unexpected behavior, see https://docs.evcc.io/docs/reference/configuration/interval [site ] DEBUG 2023/10/10 17:26:51 ---- [lp-1 ] DEBUG 2023/10/10 17:26:51 charge power: 0W [site ] DEBUG 2023/10/10 17:26:51 pv power: 310W [site ] DEBUG 2023/10/10 17:26:51 battery soc: 74% [site ] DEBUG 2023/10/10 17:26:51 battery power: 164W [site ] DEBUG 2023/10/10 17:26:51 grid power: -2W [site ] DEBUG 2023/10/10 17:26:51 grid currents: [-0.71 0.76 0.76]A [site ] DEBUG 2023/10/10 17:26:51 site power: 412W [lp-1 ] DEBUG 2023/10/10 17:26:51 charge currents: [0.009 0.009 0.006]A [lp-1 ] DEBUG 2023/10/10 17:26:51 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 17:26:52 charger status: B [lp-1 ] INFO 2023/10/10 17:26:52 car connected [lp-1 ] DEBUG 2023/10/10 17:26:52 vehicle api refresh [lp-1 ] DEBUG 2023/10/10 17:26:52 pv timer elapse [lp-1 ] DEBUG 2023/10/10 17:26:52 pv timer inactive [lp-1 ] DEBUG 2023/10/10 17:26:52 charger: guard elapse [lp-1 ] DEBUG 2023/10/10 17:26:52 guard timer inactive [lp-1 ] DEBUG 2023/10/10 17:26:52 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 17:26:52 charger vehicle id: 1D6E3836000001 [main ] DEBUG 2023/10/10 17:26:52 vehicle status: B (Skoda Enyaq) [lp-1 ] INFO 2023/10/10 17:26:52 vehicle updated: unknown -> Skoda Enyaq [lp-1 ] DEBUG 2023/10/10 17:26:52 set target soc: 85 [lp-1 ] DEBUG 2023/10/10 17:26:52 vehicle status: B [lp-1 ] DEBUG 2023/10/10 17:26:52 vehicle soc: 32% [lp-1 ] DEBUG 2023/10/10 17:26:53 vehicle soc limit: 80% [lp-1 ] DEBUG 2023/10/10 17:26:53 vehicle range: 136km [lp-1 ] DEBUG 2023/10/10 17:26:53 available power -412W < 4140W min 3p threshold [lp-1 ] DEBUG 2023/10/10 17:26:53 start phase scale1p timer [lp-1 ] DEBUG 2023/10/10 17:26:53 phase scale1p in 5m0s [lp-1 ] DEBUG 2023/10/10 17:26:53 pv charge current: 0A = 0A + -0.597A (412W @ 3p) [lp-1 ] DEBUG 2023/10/10 17:26:53 pv enable timer reset [lp-1 ] DEBUG 2023/10/10 17:26:53 pv timer inactive [site ] DEBUG 2023/10/10 17:27:11 ---- [lp-1 ] DEBUG 2023/10/10 17:27:11 charge power: 0W [site ] DEBUG 2023/10/10 17:27:11 pv power: 309W [site ] DEBUG 2023/10/10 17:27:11 battery soc: 74% [site ] DEBUG 2023/10/10 17:27:11 battery power: 192W [site ] DEBUG 2023/10/10 17:27:11 grid power: 15W [site ] DEBUG 2023/10/10 17:27:11 grid currents: [-0.75 0.88 0.78]A [site ] DEBUG 2023/10/10 17:27:11 site power: 457W [lp-1 ] DEBUG 2023/10/10 17:27:12 vehicle odometer: 39838km [lp-1 ] DEBUG 2023/10/10 17:27:12 charge currents: [0.009 0.009 0.006]A [lp-1 ] DEBUG 2023/10/10 17:27:12 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 17:27:12 charger status: B [lp-1 ] DEBUG 2023/10/10 17:27:12 available power -457W < 4140W min 3p threshold [lp-1 ] DEBUG 2023/10/10 17:27:12 phase scale1p in 4m41s [lp-1 ] DEBUG 2023/10/10 17:27:12 pv charge current: 0A = 0A + -0.662A (457W @ 3p) [site ] DEBUG 2023/10/10 17:27:31 ---- [lp-1 ] DEBUG 2023/10/10 17:27:31 charge power: 0W [site ] DEBUG 2023/10/10 17:27:31 pv power: 300W [site ] DEBUG 2023/10/10 17:27:31 battery soc: 74% [site ] DEBUG 2023/10/10 17:27:31 battery power: 198W [site ] DEBUG 2023/10/10 17:27:31 grid power: 35W [site ] DEBUG 2023/10/10 17:27:31 grid currents: [-0.73 0.9 0.78]A [site ] DEBUG 2023/10/10 17:27:31 site power: 483W [lp-1 ] DEBUG 2023/10/10 17:27:31 charge currents: [0.009 0.009 0.006]A [lp-1 ] DEBUG 2023/10/10 17:27:31 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 17:27:31 charger status: B [lp-1 ] DEBUG 2023/10/10 17:27:31 available power -483W < 4140W min 3p threshold [lp-1 ] DEBUG 2023/10/10 17:27:31 phase scale1p in 4m21s [lp-1 ] DEBUG 2023/10/10 17:27:31 pv charge current: 0A = 0A + -0.7A (483W @ 3p)
.......
removed a bunch of lines with the same messages
.......
[lp-1 ] DEBUG 2023/10/10 18:57:11 charge power: 0W [site ] DEBUG 2023/10/10 18:57:11 pv power: 0W [site ] DEBUG 2023/10/10 18:57:11 battery soc: 66% [site ] DEBUG 2023/10/10 18:57:11 battery power: 724W [site ] DEBUG 2023/10/10 18:57:11 grid power: 55W [site ] DEBUG 2023/10/10 18:57:11 grid currents: [-0.63 1 -0.84]A [site ] DEBUG 2023/10/10 18:57:11 site power: 1029W [lp-1 ] DEBUG 2023/10/10 18:57:11 charge currents: [0.008 0.009 0.006]A [lp-1 ] DEBUG 2023/10/10 18:57:11 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:57:11 charger status: B [lp-1 ] DEBUG 2023/10/10 18:57:11 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 18:57:11 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 18:57:31 ---- [lp-1 ] DEBUG 2023/10/10 18:57:31 charge power: 0W [site ] DEBUG 2023/10/10 18:57:31 pv power: 0W [site ] DEBUG 2023/10/10 18:57:31 battery soc: 66% [site ] DEBUG 2023/10/10 18:57:31 battery power: 797W [site ] DEBUG 2023/10/10 18:57:31 grid power: -48W [site ] DEBUG 2023/10/10 18:57:31 grid currents: [-0.62 0.97 -0.83]A [site ] DEBUG 2023/10/10 18:57:31 site power: 999W [lp-1 ] DEBUG 2023/10/10 18:57:31 charge currents: [0.008 0.009 0.006]A [lp-1 ] DEBUG 2023/10/10 18:57:31 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:57:31 charger status: B [lp-1 ] DEBUG 2023/10/10 18:57:31 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 18:57:31 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 18:57:51 ---- [lp-1 ] DEBUG 2023/10/10 18:57:51 charge power: 0W [site ] DEBUG 2023/10/10 18:57:51 pv power: 0W [site ] DEBUG 2023/10/10 18:57:51 battery soc: 66% [site ] DEBUG 2023/10/10 18:57:51 battery power: 709W [site ] DEBUG 2023/10/10 18:57:51 grid power: 12W [site ] DEBUG 2023/10/10 18:57:51 grid currents: [-0.61 0.88 -0.83]A [site ] DEBUG 2023/10/10 18:57:51 site power: 971W [lp-1 ] DEBUG 2023/10/10 18:57:51 charge currents: [0 0 0]A [lp-1 ] DEBUG 2023/10/10 18:57:51 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:57:51 charger status: A [lp-1 ] INFO 2023/10/10 18:57:51 car disconnected [lp-1 ] INFO 2023/10/10 18:57:51 vehicle updated: Skoda Enyaq -> unknown [lp-1 ] DEBUG 2023/10/10 18:57:51 set charge mode: pv [lp-1 ] DEBUG 2023/10/10 18:57:51 set min current: 6 [lp-1 ] DEBUG 2023/10/10 18:57:51 set max current: 16 [lp-1 ] DEBUG 2023/10/10 18:57:51 set priority: 0 [lp-1 ] DEBUG 2023/10/10 18:57:51 charger disable [lp-1 ] DEBUG 2023/10/10 18:57:51 wake-up timer: stop [site ] DEBUG 2023/10/10 18:58:11 ---- [lp-1 ] DEBUG 2023/10/10 18:58:11 charge power: 0W [site ] DEBUG 2023/10/10 18:58:11 pv power: 0W [site ] DEBUG 2023/10/10 18:58:11 battery soc: 66% [site ] DEBUG 2023/10/10 18:58:11 battery power: 668W [site ] DEBUG 2023/10/10 18:58:11 grid power: 769W [site ] DEBUG 2023/10/10 18:58:11 grid currents: [1.58 1.77 1.58]A [site ] DEBUG 2023/10/10 18:58:11 site power: 1687W [lp-1 ] DEBUG 2023/10/10 18:58:11 charge currents: [0 0 0]A [lp-1 ] DEBUG 2023/10/10 18:58:11 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:58:11 charger status: A [site ] DEBUG 2023/10/10 18:58:31 ---- [lp-1 ] DEBUG 2023/10/10 18:58:31 charge power: 10874W [site ] DEBUG 2023/10/10 18:58:31 pv power: 0W [site ] DEBUG 2023/10/10 18:58:31 battery soc: 66% [site ] DEBUG 2023/10/10 18:58:31 battery power: 597W [site ] DEBUG 2023/10/10 18:58:31 grid power: 4W [site ] DEBUG 2023/10/10 18:58:31 grid currents: [-0.68 0.91 0.78]A [site ] DEBUG 2023/10/10 18:58:31 site power: 851W [lp-1 ] DEBUG 2023/10/10 18:58:31 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 18:58:31 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:58:31 charger status: C [lp-1 ] INFO 2023/10/10 18:58:31 car connected [lp-1 ] DEBUG 2023/10/10 18:58:31 vehicle api refresh [lp-1 ] DEBUG 2023/10/10 18:58:31 charge total import: 5253.678kWh [lp-1 ] INFO 2023/10/10 18:58:31 start charging -> [lp-1 ] DEBUG 2023/10/10 18:58:31 wake-up timer: stop [lp-1 ] DEBUG 2023/10/10 18:58:31 charger vehicle id: 1D6E3836000001 [main ] DEBUG 2023/10/10 18:58:32 vehicle status: C (Skoda Enyaq) [lp-1 ] INFO 2023/10/10 18:58:32 vehicle updated: unknown -> Skoda Enyaq [lp-1 ] DEBUG 2023/10/10 18:58:32 set target soc: 85 [lp-1 ] DEBUG 2023/10/10 18:58:32 vehicle status: C [lp-1 ] DEBUG 2023/10/10 18:58:32 vehicle soc: 32% [lp-1 ] DEBUG 2023/10/10 18:58:34 vehicle soc limit: 80% [lp-1 ] DEBUG 2023/10/10 18:58:34 vehicle range: 142km [lp-1 ] DEBUG 2023/10/10 18:58:36 charger: guard elapse [lp-1 ] DEBUG 2023/10/10 18:58:36 guard timer inactive [lp-1 ] DEBUG 2023/10/10 18:58:36 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 18:58:36 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 18:58:51 ---- [lp-1 ] DEBUG 2023/10/10 18:58:51 charge power: 10874W [site ] DEBUG 2023/10/10 18:58:51 pv power: 0W [site ] DEBUG 2023/10/10 18:58:51 battery soc: 65% [site ] DEBUG 2023/10/10 18:58:51 battery power: 4864W [site ] DEBUG 2023/10/10 18:58:51 grid power: 5286W [site ] DEBUG 2023/10/10 18:58:51 grid currents: [9.09 9.27 9.46]A [site ] DEBUG 2023/10/10 18:58:51 site power: 10400W [lp-1 ] DEBUG 2023/10/10 18:58:52 vehicle odometer: 39838km [lp-1 ] DEBUG 2023/10/10 18:58:52 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 18:58:52 detected active phases: 3p [lp-1 ] DEBUG 2023/10/10 18:58:52 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:58:52 charger status: B [lp-1 ] INFO 2023/10/10 18:58:52 stop charging <- [lp-1 ] DEBUG 2023/10/10 18:58:52 wake-up timer: start [lp-1 ] DEBUG 2023/10/10 18:58:52 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:58:52 soc estimated: 32.00% (vehicle: 32.00%) [lp-1 ] DEBUG 2023/10/10 18:58:52 vehicle soc: 32% [lp-1 ] DEBUG 2023/10/10 18:58:53 vehicle soc limit: 80% [lp-1 ] DEBUG 2023/10/10 18:58:53 vehicle range: 142km [lp-1 ] DEBUG 2023/10/10 18:58:53 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 18:58:53 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 18:59:11 ---- [lp-1 ] DEBUG 2023/10/10 18:59:11 charge power: 10874W [site ] DEBUG 2023/10/10 18:59:11 pv power: 0W [site ] DEBUG 2023/10/10 18:59:11 battery soc: 65% [site ] DEBUG 2023/10/10 18:59:11 battery power: 4859W [site ] DEBUG 2023/10/10 18:59:11 grid power: 5313W [site ] DEBUG 2023/10/10 18:59:11 grid currents: [8.97 9.36 9.38]A [site ] DEBUG 2023/10/10 18:59:11 site power: 10422W [lp-1 ] DEBUG 2023/10/10 18:59:11 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 18:59:11 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:59:11 charger status: B [lp-1 ] DEBUG 2023/10/10 18:59:11 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 18:59:11 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 18:59:31 ---- [lp-1 ] DEBUG 2023/10/10 18:59:31 charge power: 10874W [site ] DEBUG 2023/10/10 18:59:31 pv power: 0W [site ] DEBUG 2023/10/10 18:59:31 battery soc: 65% [site ] DEBUG 2023/10/10 18:59:31 battery power: 4857W [site ] DEBUG 2023/10/10 18:59:31 grid power: 5358W [site ] DEBUG 2023/10/10 18:59:31 grid currents: [9.13 9.39 9.55]A [site ] DEBUG 2023/10/10 18:59:31 site power: 10465W [lp-1 ] DEBUG 2023/10/10 18:59:31 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 18:59:31 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:59:31 charger status: B [lp-1 ] DEBUG 2023/10/10 18:59:31 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 18:59:31 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 18:59:51 ---- [lp-1 ] DEBUG 2023/10/10 18:59:51 charge power: 10874W [site ] DEBUG 2023/10/10 18:59:51 pv power: 0W [site ] DEBUG 2023/10/10 18:59:51 battery soc: 65% [site ] DEBUG 2023/10/10 18:59:51 battery power: 4857W [site ] DEBUG 2023/10/10 18:59:51 grid power: 5365W [site ] DEBUG 2023/10/10 18:59:51 grid currents: [9.12 9.41 9.54]A [site ] DEBUG 2023/10/10 18:59:51 site power: 10472W [lp-1 ] DEBUG 2023/10/10 18:59:51 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 18:59:51 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 18:59:51 charger status: B [lp-1 ] DEBUG 2023/10/10 18:59:51 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 18:59:51 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 19:00:11 ---- [lp-1 ] DEBUG 2023/10/10 19:00:11 charge power: 10874W [site ] DEBUG 2023/10/10 19:00:11 pv power: 0W [site ] DEBUG 2023/10/10 19:00:11 battery soc: 64% [site ] DEBUG 2023/10/10 19:00:11 battery power: 4862W [site ] DEBUG 2023/10/10 19:00:11 grid power: 5343W [site ] DEBUG 2023/10/10 19:00:11 grid currents: [9.08 9.34 9.47]A [site ] DEBUG 2023/10/10 19:00:11 site power: 10455W [lp-1 ] DEBUG 2023/10/10 19:00:11 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 19:00:11 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 19:00:11 charger status: B [lp-1 ] DEBUG 2023/10/10 19:00:11 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 19:00:11 !! scalePhases: GetPhases 3p <> 3p wanted [site ] DEBUG 2023/10/10 19:00:31 ---- [lp-1 ] DEBUG 2023/10/10 19:00:31 charge power: 10874W [site ] DEBUG 2023/10/10 19:00:31 pv power: 0W [site ] DEBUG 2023/10/10 19:00:31 battery soc: 64% [site ] DEBUG 2023/10/10 19:00:31 battery power: 4866W [site ] DEBUG 2023/10/10 19:00:31 grid power: 5398W [site ] DEBUG 2023/10/10 19:00:31 grid currents: [9.1 9.56 9.56]A [site ] DEBUG 2023/10/10 19:00:31 site power: 10514W [lp-1 ] DEBUG 2023/10/10 19:00:31 charge currents: [15.4 15.5 15.4]A [lp-1 ] DEBUG 2023/10/10 19:00:31 charge total import: 5253.678kWh [lp-1 ] DEBUG 2023/10/10 19:00:31 charger status: B [lp-1 ] DEBUG 2023/10/10 19:00:31 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 19:00:31 !! scalePhases: GetPhases 3p <> 3p wanted
.......
removed a bunch of lines with no change
.......
[site ] DEBUG 2023/10/10 20:49:11 ---- [lp-1 ] DEBUG 2023/10/10 20:49:11 charge power: 10854W [site ] DEBUG 2023/10/10 20:49:11 pv power: 0W [site ] DEBUG 2023/10/10 20:49:11 battery soc: 5% [site ] DEBUG 2023/10/10 20:49:11 battery power: 0W [site ] DEBUG 2023/10/10 20:49:11 grid power: 9416W [site ] DEBUG 2023/10/10 20:49:11 grid currents: [16.1 16.5 16.3]A [site ] DEBUG 2023/10/10 20:49:11 site power: 9666W [lp-1 ] DEBUG 2023/10/10 20:49:11 charge currents: [15.5 15.5 15.5]A [lp-1 ] DEBUG 2023/10/10 20:49:11 charge total import: 5264.875kWh [lp-1 ] DEBUG 2023/10/10 20:49:11 charger status: B [lp-1 ] DEBUG 2023/10/10 20:49:11 !! scalePhasesIfAvailable: 3p -> 3p [lp-1 ] DEBUG 2023/10/10 20:49:11 !! scalePhases: GetPhases 3p <> 3p wanted jens@server2:~$