Closed luekii closed 3 months ago
Gibts denn eine Doku für Dein Gerät? Ohne gibts keine neuen Erkenntnisse und damit wontfix.
Es scheint wohl diese Doku zu sein, das ist das Einzige was ich dazu finde.
Dummer Fehler. Closed in https://github.com/evcc-io/evcc/commit/ebaa42f405b64b119e91228f50d55db619228967. Komisch, dass das vor Dir noch niemand bemerkt hat...
Hallo nochmal, grundsätzlich funktioniert es jetzt, danke dafür! Allerdings scheint da noch etwas vertauscht zu sein, denn sobald der Speicher endlädt wird die entsprechende Leistung bei "Batterie lädt" angezeigt und umgekehrt. Oder kann ich da etwas falsch gemacht haben?
Grüße Markus
Dann wäre auch noch das Vorzeichen falsch.
[site ] DEBUG 2024/06/17 21:33:46 ---- [lp-1 ] DEBUG 2024/06/17 21:33:46 charge power: 0W [site ] DEBUG 2024/06/17 21:33:46 battery soc: 96% [site ] DEBUG 2024/06/17 21:33:46 battery power: -270W [site ] DEBUG 2024/06/17 21:33:46 grid meter: 2W [site ] DEBUG 2024/06/17 21:33:46 grid powers: [215 121 -334]W [site ] DEBUG 2024/06/17 21:33:46 grid currents: [1.86 0.73 -1.71]A [site ] DEBUG 2024/06/17 21:33:46 pv power: 0W [site ] DEBUG 2024/06/17 21:33:46 site power: -268W
Hier noch ein Auszug aus dem Log, wenn der Speicher entlädt.
Describe the bug
Hallo, ich habe einen Sofar Solar ME3000-SP (Speicher Wechselrichter) via USB-RS485 Adapter an einem Raspi mit evcc v0.126.6 angebunden. Die Kommunikation funktioniert soweit, nur sind die Werte teilweise fehlerhaft.
battery3
Power: 30W Soc: 90%
Der Soc Wert stimmt, aber Power entspricht nicht der Lade- bzw. Entladeleistung, sondern dem Ladestrom der Akkus in Ampere.
Ich denke Mal, dass das Template "sofarsolar" für den ME3000-SP nicht passt. Das Template "sofarsolar-g3" habe ich auch getestet, das funktioniert garnicht.
Beste Grüße Markus
Steps to reproduce
1. 2. 3. ...
Configuration details
Log details
What type of operating system are you running?
Linux
Version
0.126.6