Closed mibo-wb-gh closed 2 months ago
Unfortunately your report is missing a detailed log file. Without log, we don‘t have the information for diagnosing the issue described. See https://docs.evcc.io/docs/faq#wie-kann-ich-ein-logfile-zur-fehleranalyse-erstellen.
settings
(key
,value
) VALUES ("lp1.maxCurrent","32"),("lp1.mode","now"),("lp1.minCurrent","8"),("lp1.phasesConfigured","0"),("telemetry","true"),("adminPassword","$2a$10$SVeIfhvCkO5Osd.BSwBVwu0cHziyOznCtDY61cNiflKPlGUa/puWu"),("jwtSecretKey","038a3eff67fa2df8921bf734beb666780e5687c6b89a1a788ebae08b399bb643"),("lp1.limitSoc","80"),("lp1.limitEnergy","0") ON CONFLICT (key
) DO UPDATE SET value
=excluded
.value
9 sessions
(created
,finished
,loadpoint
,identifier
,vehicle
,odometer
,meter_start_kwh
,meter_end_kwh
,charged_kwh
,charge_duration
,solar_percentage
,price
,price_per_kwh
,co2_per_kwh
) VALUES ("2024-08-29 20:01:37.337","0000-00-00 00:00:00","Garage","","WB98-iX50",NULL,2778.5801961111124,NULL,0,NULL,NULL,NULL,NULL,NULL) RETURNING id
1 sessions
SET created
="2024-08-29 20:01:37.337",finished
="0000-00-00 00:00:00",loadpoint
="Garage",identifier
="",vehicle
="WB98-iX50",odometer
=9139,meter_start_kwh
=2778.5801961111124,meter_end_kwh
=NULL,charged_kwh
=0,charge_duration
=NULL,solar_percentage
=NULL,price
=NULL,price_per_kwh
=NULL,co2_per_kwh
=NULL WHERE id
= 53 1 {"status":"ok"} [easee ] TRACE 2024/08/29 20:03:42 ProductUpdate EC6CAE5D: (2024-08-29 18:03:40 +0000 UTC) OUTPUT_CURRENT 32 [easee ] TRACE 2024/08/29 20:03:42 ProductUpdate EC6CAE5D: (2024-08-29 18:03:40 +0000 UTC) CIRCUIT_TOTAL_ALLOCATED_PHASE_CONDUCTOR_CURRENT_L1 32 [easee ] TRACE 2024/08/29 20:03:42 ProductUpdate EC6CAE5D: (2024-08-29 18:03:40 +0000 UTC) REASON_FOR_NO_CURRENT 77 [easee ] TRACE 2024/08/29 20:03:48 ProductUpdate EC6CAE5D: (2024-08-29 18:03:46 +0000 UTC) IN_CURRENT_T3 20.541000366210938 [easee ] TRACE 2024/08/29 20:03:48 ProductUpdate EC6CAE5D: (2024-08-29 18:03:46 +0000 UTC) OUT_VOLT_PIN1_3 236.93899536132812 [easee ] TRACE 2024/08/29 20:03:48 ProductUpdate EC6CAE5D: (2024-08-29 18:03:46 +0000 UTC) IN_CURRENT_T2 14.477999687194824 [easee ] TRACE 2024/08/29 20:03:48 ProductUpdate EC6CAE5D: (2024-08-29 18:03:46 +0000 UTC) TOTAL_POWER 3.502000093460083 [easee ] TRACE 2024/08/29 20:03:48 ProductUpdate EC6CAE5D: (2024-08-29 18:03:46 +0000 UTC) CIRCUIT_TOTAL_PHASE_CONDUCTOR_CURRENT_L1 20.541000366210938 [easee ] TRACE 2024/08/29 20:03:53 ProductUpdate EC6CAE5D: (2024-08-29 18:03:51 +0000 UTC) CIRCUIT_TOTAL_PHASE_CONDUCTOR_CURRENT_L1 31.194000244140625 [easee ] TRACE 2024/08/29 20:03:53 ProductUpdate EC6CAE5D: (2024-08-29 18:03:51 +0000 UTC) TOTAL_POWER 7.422999858856201 [easee ] TRACE 2024/08/29 20:03:53 ProductUpdate EC6CAE5D: (2024-08-29 18:03:51 +0000 UTC) IN_CURRENT_T3 31.19499969482422 [easee ] TRACE 2024/08/29 20:03:53 ProductUpdate EC6CAE5D: (2024-08-29 18:03:51 +0000 UTC) IN_CURRENT_T2 31.19499969482422 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_INPUT_T2 40 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_INPUT_T4 32 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_INPUT_T3 38 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_INPUT_T5 32 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_OUTPUT_L1 34 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_OUTPUT_N 34 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_OUTPUT_L3 33 [easee ] TRACE 2024/08/29 20:04:31 ProductUpdate EC6CAE5D: (2024-08-29 18:04:29 +0000 UTC) TEMP_OUTPUT_L2 33
Describe the bug
When setting evcc into "quick" / "schnell" Mode Easee Charge Wallbox does not switch to 3phase 32A charging and stays in 1phase charging 6A charging. Problem (if i understodd correctly) was addressed with the version update 0.130.0 XXX https://github.com/evcc-io/evcc/commit/9056fc60bda9f815b0f7c025a7d71060a7099a54 Easee: always pause/resume when phase switching on charger level (https://github.com/evcc-io/evcc/pull/15306) XXX problem still remains. charger logic error: current mismatch (got 6A, expected 32A)
Also tried with 1phase chargin 8A setup, still the same If I pause charging in the Easee App and resume charging then charging with 3phases 32A is possible
Steps to reproduce
Configuration details
Log details
What type of operating system are you running?
HomeAssistant Add-on
Version
0.130.0