Closed StevieC121176 closed 1 year ago
Du hast bei den Einstellungen in der Box das Nachladen aktiviert? RSDA = ON
Wird wirklich geladen, oder zeigt die Box nur "charging" an, aber der Ladestrom = 0A.
Das RSDA = On ist bei mir immer an. Es gibt noch einen Menüpunkt wo man das Authentifizieren per RFID einschalten kann (Plug&Charge ON/Off) Normal steht das auf off (so hat es noch vor der letzten Änderung am Daheimladen Template funktioniert. Nun lädt er sofort nach dem Anstecken (bei Plug&CHarge On) los bzw nach dem Authentifizieren per RFID bei Plug&Charge Off. Und ja er lädt, Stromstärke geht auf 16A und am Auto zeigt er auch an das geladen wird.
Das Verhalten ist bei mir identisch. Mit der Ausnahme, dass bei mir charge current = 0
eingestellt ist, wenn das Laden beendet wurde. Dadurch fängt das Laden nach dem einstecken erst an, wenn evcc es erlaubt und charge current >= 6
schickt.
Was macht evcc, wenn "unerlaubt" geladen wird?
Hast du mit dem neuen Template schon mal mit evcc geladen und darüber auch das Laden beendet?
Nach dem "unerlaubten Starten" kann ich die Wallbox problemlos mit evcc bedienen. Soll heissen wechseln der Modi (Schnell, min+PV und PV sowie das einstellen der Stromstärke (min/Max) klappt dann tadellos. Nur eben das Verhalten beim Anstecken ist nicht korrekt. Beim stoppen über evcc ist das Verhalten noch seltsamer. Er schaltet von 16A auf 6A. Zeigt nur noch an das das Auto verbunden ist, obwohl es noch lädt. Schalte ich dann wieder auf "Schnell", wird wieder mit 16A 11KW geladen und so auch wieder angezeigt. Ich habe heute zum ersten mal mit dem neuen Template geladen. Er ist gleich voll mal schauen was passiert wenn er fertig ist mit Laden.
Ok Fahrzeug ist fertig geladen. Ladungsende wird auch angezeigt. Nur der Modus Schalter bleibt auf Schnell stehen, müsste eigentlich auf Aus gehen.
Describe the bug
In der config ist
mode: off
eingestellt. Ist in der Wallbox Plug & Charge = Off eingestellt, beginnt das Auto nach Anstecken und entsperren mit der RFID Karte sofort zu laden. Ist Plug&Charge = ON beginnt es sofort nach anstecken zu laden. Der Modus von EVCCmode: off
wird nicht beachtet. Es ist also nicht möglich das Laden über evcc zu starten.Ich habe eine Daheimladen Touch mit der Firmware 1.12
Steps to reproduce
1. 2. 3. ... .
Configuration details
Log details
What type of operating system are you running?
Linux
Version
0.115.0 (ceb3e4d9)