I am unable to complete a restore of my phone. The process freezes at
Unknown operation (80)
Unknown data request 'PersonalizedData' received
I/O:
Choose > 2
Found device in Recovery mode
Identified device as n66map, iPhone8,2
The following firmwares are currently being signed for iPhone8,2:
[1] 15.8.2 (build 19H384)
Select the firmware you want to restore: 1
Selected firmware 15.8.2 (build 19H384)
Verifying 'iPhone_5.5_15.8.2_19H384_Restore.ipsw'...
Checksum matches.
Extracting BuildManifest from IPSW
Product Version: 15.8.2
Product Build: 19H384 Major: 19
INFO: device serial number is F2MQNAH3GRWV
Device supports Image4: true
Variant: Customer Erase Install (IPSW)
This restore will erase your device data.
################################ [ WARNING ] #################################
You are about to perform an ERASE restore. ALL DATA on the target device
will be IRREVERSIBLY DESTROYED. If you want to update your device without
erasing the user data, hit CTRL+C now and restart without -e or --erase
command line switch.
If you want to continue with the ERASE, please type YES and press ENTER.
I am unable to complete a restore of my phone. The process freezes at Unknown operation (80) Unknown data request 'PersonalizedData' received
I/O:
Choose > 2 Found device in Recovery mode Identified device as n66map, iPhone8,2 The following firmwares are currently being signed for iPhone8,2: [1] 15.8.2 (build 19H384) Select the firmware you want to restore: 1 Selected firmware 15.8.2 (build 19H384) Verifying 'iPhone_5.5_15.8.2_19H384_Restore.ipsw'... Checksum matches. Extracting BuildManifest from IPSW Product Version: 15.8.2 Product Build: 19H384 Major: 19 INFO: device serial number is F2MQNAH3GRWV Device supports Image4: true Variant: Customer Erase Install (IPSW) This restore will erase your device data. ################################ [ WARNING ] #################################
You are about to perform an ERASE restore. ALL DATA on the target device
will be IRREVERSIBLY DESTROYED. If you want to update your device without
erasing the user data, hit CTRL+C now and restart without -e or --erase
command line switch.
If you want to continue with the ERASE, please type YES and press ENTER.
##############################################################################