Closed srayneau closed 1 year ago
So correction, this module work with 5v. After enable 5v in GPIO settings, the module work with gpsd.
gpsd:CLIENT: => client(1): {"class":"SKY","device":"/dev/ttyACM3","time":"2023-06-03T15:37:49.000Z","xdop":0.90,"ydop":1.57,"vdop":2.40,"tdop":2.00,"hdop":1.89,"gdop":3.65,"pdop":3.05,"nSat":28,"uSat":10,"satellites":[{"PRN":1,"el":78.0,"az":45.0,"ss":39.0,"used":true,"gnssid":0,"svid":1,"health":1},{"PRN":2,"el":53.0,"az":102.0,"ss":33.0,"used":true,"gnssid":0,"svid":2,"health":1},{"PRN":3,"el":64.0,"az":251.0,"ss":38.0,"used":true,"gnssid":0,"svid":3,"health":1},{"PRN":4,"el":16.0,"az":183.0,"ss":36.0,"used":true,"gnssid":0,"svid":4,"health":1},{"PRN":8,"az":0.0,"ss":31.0,"used":false,"gnssid":0,"svid":8},{"PRN":14,"el":16.0,"az":262.0,"ss":21.0,"used":true,"gnssid":0,"svid":14,"health":1},{"PRN":21,"el":58.0,"az":101.0,"ss":34.0,"used":true,"gnssid":0,"svid":21,"health":1},{"PRN":23,"az":0.0,"ss":0.0,"used":false,"gnssid":0,"svid":23},{"PRN":28,"el":8.0,"az":81.0,"ss":0.0,"used":false,"gnssid":0,"svid":28,"health":1},{"PRN":29,"az":0.0,"ss":0.0,"used":false,"gnssid":0,"svid":29},{"PRN":36,"el":30.0,"az":141.0,"ss":0.0,"used":false,"gnssid":1,"svid":123},{"PRN":39,"el":10.0,"az":110.0,"ss":0.0,"used":false,"gnssid":1,"svid":126},{"PRN":40,"el":16.0,"az":118.0,"ss":0.0,"used":false,"gnssid":1,"svid":127},{"PRN":49,"el":37.0,"az":175.0,"ss":0.0,"used":false,"gnssid":1,"svid":136},{"PRN":301,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":1},{"PRN":305,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":5},{"PRN":310,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":10},{"PRN":316,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":16},{"PRN":318,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":18},{"PRN":319,"az":0.0,"ss":25.0,"used":false,"gnssid":2,"svid":19},{"PRN":320,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":20},{"PRN":321,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":21},{"PRN":324,"el":16.0,"az":284.0,"ss":0.0,"used":false,"gnssid":2,"svid":24,"health":1},{"PRN":328,"az":0.0,"ss":0.0,"used":false,"gnssid":2,"svid":28},{"PRN":331,"el":9.0,"az":237.0,"ss":28.0,"used":true,"gnssid":2,"svid":31,"health":1},{"PRN":333,"el":77.0,"az":57.0,"ss":36.0,"used":true,"gnssid":2,"svid":33,"health":1},{"PRN":427,"el":78.0,"az":279.0,"ss":26.0,"used":true,"gnssid":3,"svid":27,"health":1},{"PRN":432,"el":25.0,"az":217.0,"ss":34.0,"used":true,"gnssid":3,"svid":32,"health":1}]}\x0d\x0a
But not with your great application :D
it work, i don't see you can change the baudrate... ou can add this module in the liste :)
Hello,
I have BE-180 GPS receptor Module (amazon say replace BN-180 GPS) can you add this module ?
This is the data with USB-UART bridge at 38400 bauds:
$GPGSV,3,3,10,26,28,169,29,27,77,335,37,16A $GPGSV,1,1,02,15,05,040,,30,04,331,,064 $GAGSV,2,1,05,13,51,052,34,14,59,290,28,21,44,178,18,31,19,318,24,779 $GAGSV,2,2,05,33,20,242,17,746 $GAGSV,1,1,03,03,06,039,,08,07,085,,15,01,058,,042 $GBGSV,1,1,04,11,50,066,26,28,36,275,27,37,34,288,22,43,76,033,29,175 $GBGSV,1,1,01,23,33,224,,043 $GQGSV,1,1,00,064 $GNGLL,4547.41957,N,00125.16551,E,112608.00,A,A77 $GNRMC,112609.00,A,4547.41959,N,00125.16549,E,0.129,,030623,,,A,V1C $GNVTG,,T,,M,0.129,N,0.239,K,A3F $GNGGA,112609.00,4547.41959,N,00125.16549,E,1,12,0.85,441.0,M,47.5,M,,4D $GNGSA,A,3,02,08,10,16,18,21,23,26,27,,,,1.71,0.85,1.48,100 $GNGSA,A,3,13,,,,,,,,,,,,1.71,0.85,1.48,306 $GNGSA,A,3,11,28,37,43,,,,,,,,,1.71,0.85,1.48,40A $GNGSA,A,3,,,,,,,,,,,,,1.71,0.85,1.48,502 $GPGSV,3,1,10,02,26,245,26,07,15,305,17,08,42,297,29,10,50,129,25,165 $GPGSV,3,2,10,16,61,186,18,18,25,056,19,21,19,244,17,23,45,072,34,16A $GPGSV,3,3,10,26,28,169,30,27,77,335,37,162 $GPGSV,1,1,02,15,05,040,,30,04,331,,064 $GAGSV,2,1,05,13,51,052,33,14,59,290,29,21,44,178,18,31,19,318,24,77F $GAGSV,2,2,05,33,20,242,14,745 $GAGSV,1,1,03,03,06,039,,08,07,085,,15,01,058,,042 $GBGSV,2,1,05,11,50,066,27,23,33,224,18,28,36,275,27,37,34,288,21,174 $GBGSV,2,2,05,43,76,033,29,14E $GQGSV,1,1,00,064 $GNGLL,4547.41959,N,00125.16549,E,112609.00,A,A*71
Thank you :)