fairbird / RaedQuickSignal

2 stars 4 forks source link

Satfinder v5.7 #40

Closed EnoSat closed 1 week ago

EnoSat commented 2 weeks ago

Is it possible to correct the signal display in OE2.5/QE2.6 if the satellites.xml uses MIS? without MIS no problem SF2

with MIS show none signal SF1

[36153.469624@0]- si2183(0): DVB-S(2) voltage is 18V now [36153.476858@0]- si2183(0): start tune freq 1266000, sr 35295000, delsys 6 [36153.501046@0]- si2183(0): start tune freq 1266000, sr 35295000, delsys 6 [36153.525668@0]- si2183(0): start tune freq 1266000, sr 35295000, delsys 6 [36153.621116@0]- si2183(0): found carrier after 96 ms [36156.036305@0]- si2183(0): tune timeout! [36232.649230@0]- si2183(0): start tune freq 1266000, sr 35295000, delsys 6 [36232.745106@1]- si2183(0): found carrier after 96 ms [36235.155698@0]- si2183(0): tune timeout!

if scan is started from satellites.xml then MIS is detected and tuned [36557.671067@2]- dmx0: DMX_SET_SOURCE 0 [36557.672119@4]- si2183(0): tone is disabled now [36557.681522@4]- si2183(0): start tune freq 1221500, sr 29950000, delsys 6 [36557.777122@0]- si2183(0): found carrier after 96 ms [36557.801117@0]- si2183(0): final lock after 120 ms [36559.663172@0]- si2183(0): DVB-S(2) voltage is 18V now [36559.672680@0]- si2183(0): start tune freq 1266000, sr 35295000, delsys 6 [36559.672824@0]- si2183(0): IS_ID 1 [36559.673200@0]- si2183(0): PLS_MODE 1, PLS_CODE 131070 [36559.687743@0]- si2183(0): PLS Gold code 131070 set [36559.785136@1]- si2183(0): found carrier after 112 ms [36559.833105@1]- si2183(0): final lock after 160 ms [36560.296954@1]- si2183(0): start tune freq 1266000, sr 35295000, delsys 6 [36560.297097@1]- si2183(0): IS_ID 4 [36560.297474@1]- si2183(0): PLS_MODE 1, PLS_CODE 131070 [36560.309135@0]- si2183(0): PLS Gold code 131070 set [36560.405219@1]- si2183(0): found carrier after 108 ms [36560.453106@1]- si2183(0): final lock after 156 ms [36560.900360@1]- si2183(0): start tune freq 1266000, sr 35295000, delsys 6 [36560.900504@1]- si2183(0): IS_ID 9 [36560.900880@1]- si2183(0): PLS_MODE 1, PLS_CODE 131070 [36560.925757@5]- si2183(0): PLS Gold code 131070 set [36561.021121@0]- si2183(0): found carrier after 120 ms [36561.069093@0]- si2183(0): final lock after 168 ms [36561.468975@1]- si2183(0): DVB-S(2) voltage is 13V now [36561.478307@5]- si2183(0): start tune freq 1304500, sr 29950000, delsys 6 [36561.573121@0]- si2183(0): found carrier after 96 ms [36561.597131@0]- si2183(0): final lock after 120 ms [36563.336302@0]- si2183(0): start tune freq 1346000, sr 29950000, delsys 6 [36563.433112@0]- si2183(0): found carrier after 96 ms [36563.457231@0]- si2183(0): final lock after 120 ms screenshot

fairbird commented 2 weeks ago

What did you mean MIS ?!! Is it Multistream ?! If yes please send to my satellites.xml with Hotbird or nilesat only and some frequency to test it ?!

And before that Is it same thing with open source images ?!

P.S: this source for my plugin (RaedQuickSignal) not for Satfinder ... The Satfinder what I have edited from long time and Just to help user to can scan from plugin as you know the original Satfinder is ugly no option scan. So Is the Satfinder plugin for DreamOS images work fine with MIS ?! if not then I can not do any things !!

EnoSat commented 2 weeks ago

yes, MIS = MultiStream only known on: 30 West - 11329H, 11491V 5 West - 11016H, 12535H, 12564V, 12585H, 12606V, 12627H, 12648V, 12690V, 12732V 1W - 10716V 9E - 12111V, 12149V, 12187V, 12226V, 12265V, 12303V, 12341V, 12380V, 12418V, 12466V 10E - 12736V 13E - 11219H (but data for EUMETSAT) 21E - 11618V 33E - 12646H I don't know if MIS is used on Nilesat yes SatFinder for DreamOS is very limited Do you think you could try any of the above on DreamOS?

fairbird commented 2 weeks ago

I have only (Bader + NileSat + Hotbird) ... So I cannot do any thing without testing ... And you did not answered me ?!

Is the Satfinder plugin for DreamOS images work fine with MIS ?! if not then I can not do any things !!

Or you can asked Multimedia Team here to support MIS in their plugin https://dreambox.de/board/

EnoSat commented 2 weeks ago

I have not tried the original when I have the v5.7 modification installed Original show signal, but not show LOCK screenshot (2) https://dreambox.de/board/index.php?thread/26791-satfinder/

EnoSat commented 2 weeks ago

result from 13E on another box screenshot_20240702152120 screenshot_20240702152132

fairbird commented 2 weeks ago

Send to me your satellites.xml uses MIS on Hotbird 13E !!

EnoSat commented 2 weeks ago

satellites.zip

fairbird commented 2 weeks ago

I can not get signal with mis frequencies !! I am never using mis before !

1 2

EnoSat commented 2 weeks ago

Looks like the BCM45308X does not support this MIS mode`s capture_015_02072024_172839 capture_005_02072024_233132 screenshot_20240702232840

fairbird commented 2 weeks ago

I have update Satfinder for dreamOS to V 5.8 (I do not now if signal work or not for mis) https://github.com/fairbird/RaedQuickSignal/commit/ea02d91ef7407bc4d647aa141474b608aa783294

EnoSat commented 2 weeks ago

Hi, test Satfinder v5.8 does not display signal after selecting frequency with MIS screenshot (18) But at least after pressing the BLUE button screenshot (19) show signal screenshot (20) PS: Where should Signalfinder appear?

fairbird commented 2 weeks ago

My Edited the plugin (Satfinder) just to use it throw of my plugin RaedQuickSignal. So from RaedQuickSignal after press blue button should be the signal work just fine. So I do not care if work fine or not after using direct from image. I'm just support my plugin not DreamOS images>

P.S: Signalfinder not for dreamOS .. It is only for open source (only Satfinder for DreamOS)

EnoSat commented 1 week ago

ok