I found this in GRLC coin discord maybe you are interested

[rhyno78]

https://garlicsquire.com/listing/new-allium-mining-software/ it would be great to achieve more than 30mh/s on this algo since you already support navi gpus

[fancyIX]

I know that. Have a WIP https://github.com/fancyIX/ccminer It's much faster than original ccminer with pre-30xx cards. For RTX 30xx cards it's not easy to get such huge performance boost.

[rhyno78]

@fancyIX okay I'll wait for navi gpus optimisation too :) thank you

[rhyno78]

@fancyIX how do you achieve allium on RX 6900 at 24mh/s? I tried overclocking until 2250mhz still not getting 24mh/s… peaked at around 21.4-21.5mh/s

[fancyIX]

@fancyIX how do you achieve allium on RX 6900 at 24mh/s? I tried overclocking until 2250mhz still not getting 24mh/s… peaked at around 21.4-21.5mh/s

Which version of sgminar did you run? My card is sapphire nitro+. Not sure if that’s faster than normal models. Also driver version can affect performance too

[rhyno78]

@fancyIX 0.7.6. mine also sapphire nitro. my driver is 21.9.1

[rhyno78]

@fancyIX tried again today peaked at 22mh/s at 2250mhz, but nowhere near 24mh/s...

[fancyIX]

@rhyno78 may be you can try newest driver. Remember to remove any bin files in same folder of seminar.exe

[rhyno78]

@fancyIX I already tried your solution. now use 21.10.2 whql. already deleted the bin files in the same folder of sgminer.exe... still stuck at 21.8mh/s-22mh/s

[fancyIX]

@rhyno78 this is what I got:

[rhyno78]

@fancyIX do you clock it above 2300mhz? or have radeon SAM enabled? my motherboard doesn't support SAM

[fancyIX]

@fancyIX do you clock it above 2300mhz? or have radeon SAM enabled? my motherboard doesn't support SAM

I didn't change default setting. No OC . You did setup those env, right? setx GPU_FORCE_64BIT_PTR 1 ...

[rhyno78]

@fancyIX yes but i did undervolted it (around 800v) and clocked to 2050. I got 120watt at 20mh/s. memory clock is not important in this algo. another i use is 2250mhz with undervolt around 875-900 (this yield max at 21.8-22mh/s at 150watt)

[rhyno78]

@fancyIX i see now. this algo need more power to reach 24mh/s. if i use default i also got 23.8-24mh/s. but power consumption is too high at 269watt

[fancyIX]

@fancyIX yes but i did undervolted it (around 800v) and clocked to 2050. I got 120watt at 20mh/s. memory clock is not important in this algo. another i use is 2250mhz with undervolt around 875-900 (this yield max at 21.8-22mh/s at 150watt)

Depending on implementation, it can require faster memory or not. Current implementation of lyra2 stores data in registers, so memory is not important.

[rhyno78]

@fancyIX yes. but allium power consumption is quite low for algo that heavily use core clock. neoscrypt is very power hungry. btw hiveos support is very bad. it's been more than a week when I reported that your miner need " _navi " suffix in order to work with rx 6000 series, I submit to them via email and forum and no answer... they just don't care and not even read your information too...