fastresearchgroup TORCHE issues

fastresearchgroup / TORCHE

TOolbox for Reactor Cross-Flow Heat Exchangers: Python Scripts for calculation of Pressure drop and Heat Transfer for crossflow tube bundles based on models found across the literature.

MIT License

23 stars 13 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Address the issue with the current 3stream solver being able to only handle the intermediate fluid being the hot one.

#51 lcarasik opened 2 years ago
2
Add test case for parallel/counter flow heat exchangers (3 streams) - P4

#50 lcarasik opened 2 years ago
0
Add test case for parallel/counter flow heat exchangers (3 streams) - P3

#49 lcarasik opened 2 years ago
0
Add test case for parallel/counter flow heat exchangers (3 streams) - P2

#48 lcarasik opened 2 years ago
0
Add test case for parallel/counter flow heat exchangers (3 streams) - P1

#47 lcarasik opened 2 years ago
0
(Open) Adding three stream heat exchanger temperature profiles

#46 lcarasik opened 2 years ago
1
Updated Carasik affiliation

#45 lcarasik closed 4 years ago
0
Modification to add H2O properties to TORCHE at 20 C

#44 lcarasik closed 4 years ago
0
Add fluid properties for water

#43 lcarasik closed 4 years ago
0
Primitive OO functionality and runner script

#42 dakotapbrown opened 5 years ago
0
Refactor TORCHE code to make for cleaner read

#41 dakotapbrown opened 5 years ago
0
Simplify TORCHE function params; pass as object instead

#40 dakotapbrown opened 5 years ago
0
Revise what inputs are needed into the functions and address issue #16

#39 lcarasik opened 5 years ago
0
Add error messages (with toggle on/off switch) for each function

#38 lcarasik opened 5 years ago
0
Adding the data extracted from literature for correlation validation

#37 lcarasik opened 5 years ago
0
Look into adding a tester for pull requests

#36 lcarasik opened 5 years ago
0
Addressing Issue 31

#35 lcarasik closed 5 years ago
1
Updated the affiliations for fall 2019

#34 lcarasik closed 5 years ago
0
Updating some contact information and the range of validity variable

#33 lcarasik closed 6 years ago
0
Removed issues.txt since its been moved over to the issues on github.

#32 lcarasik closed 6 years ago
0
Make output prettier by printing out only a few significant digits.

#31 lcarasik closed 5 years ago
0
Add Prandtl number ranges for each correlations when available. It doesn't look likely that we can truly apply ranges. GG doesn't provide it.

#30 lcarasik opened 6 years ago
0
Find out what happened to the curve fits created for the first reference plus the recent student conference paper.

#29 lcarasik opened 6 years ago
2
Provide a csv file with the graph extracted data for comparison when available.

#28 lcarasik opened 6 years ago
2
Bias: Need to determine how the percent error was calculated and is it appropriate based off this information. – Ask Jonah what exactly he did again.

#27 lcarasik closed 6 years ago
1
Need to remove the specific corrections from the dP_Zu function and make them general. Allow the user to decide if they want to use it or not. For instance, the seiter-tate visocisty correction for both liquid (mu) and gas (Temperature).

#26 lcarasik opened 6 years ago
0
Add heat transfer correlation for helical coils

#25 lcarasik opened 6 years ago
0
Add test problem from example in VDI Heat Atlas 2nd Edition pg. 1082-84

#24 lcarasik opened 6 years ago
0
Add pressure drop across non-circular tubes in cross-flow such as ovals

#23 lcarasik opened 6 years ago
0
Add pressure drop correlations for packed beds for pebble bed reactor geometries

#22 lcarasik opened 6 years ago
0
Add VDI Heat Atlas equations for pressure drop and heat transfer (These may already exist)

#21 lcarasik opened 6 years ago
0
Add the analytical solution of Khan et. al. "Convection Heat Transfer from tube banks in crossflow: Analytical Approach"

#20 lcarasik opened 6 years ago
0
Changes to master_example.py, modifications to all functions in TORCHE.py, and major updates to the README.

#19 lcarasik closed 6 years ago
0
Fix indentation and removed semi-colons from lines and redid the dP_GG description

#18 lcarasik closed 6 years ago
2
Replace all numpy declarations with np

#17 lcarasik closed 6 years ago
1
Remove velocity input for all functions. Only require Reynolds numbers and Prandtl number.

#16 lcarasik opened 6 years ago
2
Revise GG correlation to reflect additional coefficients (non-isothermal)

#15 lcarasik opened 7 years ago
3
Revise Readme

#14 lcarasik closed 6 years ago
1
Add master_example

#13 Jhaefner closed 7 years ago
0
ReadMe Updated For changes in code naming

#12 Jhaefner closed 7 years ago
0
Rename code files to follow a consistent naming structure.

#11 lcarasik closed 7 years ago
1
User Manual

#10 lcarasik opened 7 years ago
2
Heat Transfer Correlation - Gaddis-Gnielinski

#9 lcarasik closed 7 years ago
1
Update ReadMe

#8 lcarasik closed 7 years ago
1
Heat Transfer Correlation - ZUKAUSKAS

#7 lcarasik closed 7 years ago
0
Gaddis-Gnielinski Pressure Drop Model

#6 Jhaefner closed 7 years ago
5
Add Kays and London pressure drop model

#5 lcarasik closed 7 years ago
3
README Created for Legacy

#4 lcarasik closed 8 years ago
0
Fixed function names

#3 Jhaefner closed 8 years ago
0
Organizing README and adding reference

#2 lcarasik closed 8 years ago
0