Open hobodrifterdavid opened 7 years ago
Hi i am also facing the same problem. below is my log. can i get any hint to resolve this..!
Initializing modem...
Waiting for network coverage...
Dialing number: +918660701459
Traceback (most recent call last):
File "dial_polling_demo.py", line 69, in
I have a similar problem with the Huawei modem E3531. I tried incoming_callTrial.py and it got stuck at the ¨Waiting for incoming calls.... ¨ message. I called the modem with my phone and I get a line busy message on my phone. I then tried the dial_demo.py code and the following is what I got. Any ideas of what I can do to get me out of this bind?
Initializing modem... INFO: Connecting to modem on port /dev/ttyUSB0 at 115200bps DEBUG: write: ATZ DEBUG: notification: ['^RSSI: 13', '^HCSQ:"WCDMA",49,35,37', '^RSSI: 13', '^HCSQ:"WCDMA",50,34,33', '^RSSI: 13', '^HCSQ:"WCDMA",50,35,35'] DEBUG: Unhandled unsolicited modem notification: ['^RSSI: 13', '^HCSQ:"WCDMA",49,35,37', '^RSSI: 13', '^HCSQ:"WCDMA",50,34,33', '^RSSI: 13', '^HCSQ:"WCDMA",50,35,35'] DEBUG: response: ['OK'] DEBUG: write: ATE0 DEBUG: response: ['OK'] DEBUG: write: AT+CFUN? DEBUG: response: ['+CFUN: 1', 'OK'] DEBUG: write: AT+CMEE=1 DEBUG: response: ['OK'] DEBUG: write: AT+CPIN? DEBUG: response: ['+CPIN: READY', 'OK'] DEBUG: write: AT+CLAC DEBUG: response: ['ERROR'] DEBUG: write: AT+WIND? DEBUG: response: ['ERROR'] DEBUG: write: AT+CGMI DEBUG: response: ['huawei', 'OK'] INFO: Loading Huawei call state update table DEBUG: write: AT+COPS=3,0 DEBUG: response: ['OK'] DEBUG: write: AT+CMGF=0 DEBUG: response: ['OK'] DEBUG: write: AT+CSCA? DEBUG: response: ['+CSCA: "+2348020000008",145', 'OK'] DEBUG: write: AT+CSMP=49,167,0,0 DEBUG: response: ['ERROR'] DEBUG: write: AT+CSCA? DEBUG: response: ['+CSCA: "+2348020000008",145', 'OK'] DEBUG: write: AT+CPMS=? DEBUG: response: ['+CPMS: ("SM","ME"),("SM","ME"),("SM","ME")', 'OK'] DEBUG: write: AT+CPMS="ME","ME","ME" DEBUG: response: ['+CPMS: 0,20,0,20,0,20', 'OK'] DEBUG: write: AT+CNMI=2,1,0,2 DEBUG: response: ['OK'] DEBUG: write: AT+CLIP=1 DEBUG: response: ['OK'] DEBUG: write: AT+CRC=1 DEBUG: response: ['OK'] DEBUG: write: AT+CVHU=0 DEBUG: response: ['ERROR'] Waiting for network coverage... DEBUG: write: AT+CREG? DEBUG: response: ['+CREG: 2,1,"018B","002D9CE7"', 'OK'] INFO: +CREG check disabled due to invalid response or unsupported command DEBUG: write: AT+CSQ DEBUG: response: ['+CSQ: 13,99', 'OK'] Dialing number: 08034019398 DEBUG: write: ATD08034019398;
Traceback (most recent call last):
File "/home/pi/GSMTest/python-gsmmodem/CallTest.py", line 61, in
By the way, the SMS_handler_demo.py worked. I was able to send an SMS to my Raspberry Pi 3 and I got a reply.
I tried running the test script dial_callback_demo.py. Ubuntu 16.04, running on Python 2.7, Huawei e171 USB 3G modem (unlocked and voice enabled). I get this message:
DEBUG: write: AT+CSQ DEBUG: response: ['+CSQ: 10,99', 'OK'] Dialing number: 0951161251 DEBUG: write: ATD0951161251; DEBUG: response: ['OK'] Traceback (most recent call last): File "dial_callback_demo.py", line 71, in
main()
File "dial_callback_demo.py", line 64, in main
call = modem.dial(NUMBER, timeout=10, callStatusUpdateCallbackFunc=callStatusCallback)
File "/usr/local/lib/python2.7/dist-packages/gsmmodem/modem.py", line 728, in dial
raise TimeoutException()
gsmmodem.exceptions.TimeoutException
I plan to look into it myself, but, any hints?
Many Thanks, David