search

fauzan505 / reaver-wps

Automatically exported from code.google.com/p/reaver-wps
0 stars 0 forks source link

The passkey recovered incorrect #463

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
A few things to consider before submitting an issue:

0. We write documentation for a reason, if you have not read it and are
having problems with Reaver these pages are required reading before
submitting an issue:
http://code.google.com/p/reaver-wps/wiki/HintsAndTips
http://code.google.com/p/reaver-wps/wiki/README
http://code.google.com/p/reaver-wps/wiki/FAQ
http://code.google.com/p/reaver-wps/wiki/SupportedWirelessDrivers
1. Reaver will only work if your card is in monitor mode.  If you do not
know what monitor mode is then you should learn more about 802.11 hacking
in linux before using Reaver.
2. Using Reaver against access points you do not own or have permission to
attack is illegal.  If you cannot answer basic questions (i.e. model
number, distance away, etc) about the device you are attacking then do not
post your issue here.  We will not help you break the law.
3. Please look through issues that have already been posted and make sure
your question has not already been asked here: http://code.google.com/p
/reaver-wps/issues/list
4. Often times we need packet captures of mon0 while Reaver is running to
troubleshoot the issue (tcpdump -i mon0 -s0 -w broken_reaver.pcap).  Issue
reports with pcap files attached will receive more serious consideration.

Answer the following questions for every issue submitted:

0. What version of Reaver are you using?  (Only defects against the latest
version will be considered.)

1. What operating system are you using (Linux is the only supported OS)?

2. Is your wireless card in monitor mode (yes/no)?

3. What is the signal strength of the Access Point you are trying to crack?

4. What is the manufacturer and model # of the device you are trying to
crack?

5. What is the entire command line string you are supplying to reaver?

6. Please describe what you think the issue is.

7. Paste the output from Reaver below.

 WPS PIN: '59390640'
[+] WPA PSK: 'e0414b4e4ab5c5768aa5668c549db33965e40759c7000c147f6225234dd03dd2'
[+] AP SSID: 'Tenda'

Original issue reported on code.google.com by mio...@gmail.com on 29 Jan 2013 at 2:35

GoogleCodeExporter commented 8 years ago 
Is any one having the same issue? im using reaver 1.4, alfa wireless usb. Tenda 
router,
 WPS PIN: '59390640'
[+] WPA PSK: 'e0414b4e4ab5c5768aa5668c549db33965e40759c7000c147f6225234dd03dd2'
[+] AP SSID: 'Tenda'

Now im testing my Aztech 3g/router.

Original comment by mio...@gmail.com on 29 Jan 2013 at 2:42

GoogleCodeExporter commented 8 years ago 
In you case there is a Radius Server who preventing you from recieving any 
authentication to this AP! I have seen the same output when Radius Server is 
enabled.
It isnt from reaver!
Probably there will be a success if you use same MAC as already connected 
member to this networrk.
Test it and post here :)

Original comment by kostad...@yahoo.com on 24 Mar 2013 at 8:21

GoogleCodeExporter commented 8 years ago 
how to do?

Original comment by 3x1l32...@gmail.com on 24 Mar 2013 at 10:56