Closed wangpengli closed 4 years ago
Thanks for the suggestion. Right now, I'm using the EByte E22 modules, which have a 30dBm PA and a 1-2dB NF LNA in them.
This is what the inside of the E22 900M30 looked like without the shield can FYI:
On a similar note, do you have any experience with LoRa designs in the 220MHz-230MHz? That's an appealing band for LoRa use in the US, as the 1.25m band is less utilized than the 70cm band and it's the lowest frequency that we're allowed to use spread spectrum with.
I use SX1278 with 470MHZ , it's good . I make a radio prototype for test , use some protocol like you QMesh.
faydr notifications@github.com 于2020年1月4日周六 下午11:56写道:
Thanks for the suggestion. Right now, I'm using the EByte E22 modules, which have a 30dBm PA and a 1-2dB NF LNA in them.
This is what the inside of the E22 900M30 looked like without the shield can FYI: [image: image] https://user-images.githubusercontent.com/33201069/71768016-9e781800-2ecf-11ea-9d92-2d0c7f4ba9db.png
On a similar note, do you have any experience with LoRa designs in the 220MHz-230MHz? That's an appealing band for LoRa use in the US, as the 1.25m band is less utilized than the 70cm band and it's the lowest frequency that we're allowed to use spread spectrum with.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/faydr/QMesh/issues/1?email_source=notifications&email_token=ABOWB3L5FJLBGS3R65VVF2LQ4CWSHA5CNFSM4KCVOKRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEIC2S6Y#issuecomment-570796411, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABOWB3O6FBCSCIXHZBHZVYLQ4CWSHANCNFSM4KCVOKRA .
[image: image.png] [image: image.png] [image: image.png] For your reference.
faydr notifications@github.com 于2020年1月4日周六 下午11:56写道:
Thanks for the suggestion. Right now, I'm using the EByte E22 modules, which have a 30dBm PA and a 1-2dB NF LNA in them.
This is what the inside of the E22 900M30 looked like without the shield can FYI: [image: image] https://user-images.githubusercontent.com/33201069/71768016-9e781800-2ecf-11ea-9d92-2d0c7f4ba9db.png
On a similar note, do you have any experience with LoRa designs in the 220MHz-230MHz? That's an appealing band for LoRa use in the US, as the 1.25m band is less utilized than the 70cm band and it's the lowest frequency that we're allowed to use spread spectrum with.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/faydr/QMesh/issues/1?email_source=notifications&email_token=ABOWB3L5FJLBGS3R65VVF2LQ4CWSHA5CNFSM4KCVOKRKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEIC2S6Y#issuecomment-570796411, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABOWB3O6FBCSCIXHZBHZVYLQ4CWSHANCNFSM4KCVOKRA .
seems the picture can not upload by mail, so would you give me your private email?
daniel.fay@gmail.com
Sorry for the delay in getting back to you, I got really sick in the last two weeks.
I'm going to close this issue. I'll keep in mind this part for future developments.
we used a PA which include the tx/rx switch from Skyworks , model is SKY65366, it's have 30dBm output gain.