Problems with Beta10

[MartinKuhl]

I updated my VM from beta9 to beta10. Before I was able to boot without any problems. I updated ARPL with the addons and moduls and rebuild the loader. Now ARPL is starting but I am not able to access DSM via IP or via Synology assistant.

here is my serial out with some error messages at the end.

Booting...

Please press Enter to activate this console. [    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.180+ (root@build2) (gcc version 8.5.0 (GCC) ) #42962 SMP Tue Oct 18 15:06:56 CST 2022
[    0.000000] Command line: synoboot_satadom=1 dom_szmax=510 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0000 syno_port_thaw=1 mac1=001132faXXXX sn=2151SQXXXXXXX vid=0x0000 elevator=elevator HddHotplug=0 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000400-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffebfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffec000-0x000000007ffedfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ffee000-0x000000007fffafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fffb000-0x000000007fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed04000-0x00000000fed04fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Parallels Software International Inc. Parallels Virtual Platform/Parallels Virtual Platform, BIOS 18.1.0 (53311) 10/26/2022
[    0.000000] Kernel/User page tables isolation: disabled
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7ffec max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x0009fc30-0x0009fc3f] mapped at [ffff88000009fc30]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[    0.000000] BRK [0x7cd55000, 0x7cd55fff] PGTABLE
[    0.000000] BRK [0x7cd56000, 0x7cd56fff] PGTABLE
[    0.000000] BRK [0x7cd57000, 0x7cd57fff] PGTABLE
[    0.000000] BRK [0x7cd58000, 0x7cd58fff] PGTABLE
[    0.000000] BRK [0x7cd59000, 0x7cd59fff] PGTABLE
[    0.000000] log_buf_len: 33554432 bytes
[    0.000000] early log buf free: 1044612(99%)
[    0.000000] RAMDISK: [mem 0x79de1000-0x7c1fffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 PRLS  )
[    0.000000] ACPI: XSDT 0x000000007FFF2D40 00004C (v01 PRLS   PRLS_OEM 00000001 INTL 20051216)
[    0.000000] ACPI: FACP 0x000000007FFEE0C0 0000F4 (v03 PRLS   PRLS_OEM 00000001 INTL 20051216)
[    0.000000] ACPI: DSDT 0x000000007FFEE440 004853 (v02 PRLS   PRLSACPI 00001001 INTL 20160527)
[    0.000000] ACPI: FACS 0x000000007FFEE1C0 000040
[    0.000000] ACPI: FACS 0x000000007FFEE1C0 000040
[    0.000000] ACPI: APIC 0x000000007FFEE200 000216 (v01 PRLS   PRLS_OEM 00000001 INTL 20051216)
[    0.000000] ACPI: HPET 0x000000007FFF2CC0 000038 (v00 PRLS   PRLS_OEM 00000001 INTL 20051216)
[    0.000000] ACPI: MCFG 0x000000007FFF2D00 00003C (v01 PRLS   PRLS_OEM 00000001 INTL 20051216)
[    0.000000] ACPI: OEM1 0x000000007FFF2DC0 000394 (v01 PRLS   PRLS_OEM 00000001 INTL 20051216)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007ffebfff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ffebfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffebfff]
[    0.000000] On node 0 totalpages: 524170
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8128 pages used for memmap
[    0.000000]   DMA32 zone: 520172 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 dfl edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 dfl edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: 32 Processors exceeds NR_CPUS limit of 24
[    0.000000] smpboot: Allowing 24 CPUs, 22 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007d000000 s95192 r8192 d31784 u262144
[    0.000000] pcpu-alloc: s95192 r8192 d31784 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515956
[    0.000000] Kernel command line: synoboot_satadom=1 dom_szmax=510 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DS3622xs+ netif_num=1 pid=0x0000 syno_port_thaw=1 mac1=001132faXXXX sn=2151SQXXXXXXX vid=0x0000 elevator=elevator HddHotplug=0 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0
[    0.000000] Synology boot device SATADOM: 1
[    0.000000] Synology Hardware Version: DS3622xs+
[    0.000000] Internal netif num: 1
[    0.000000] Mac1: 001132faXXXX
[    0.000000] Serial Number: 2151SQXXXXXXX
[    0.000000] SYNO GPIO HDD detect pin: 0
[    0.000000] Vender format version: 2
[    0.000000] Power on seq num: 0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1976088K/2096680K available (5549K kernel code, 880K rwdata, 1780K rodata, 924K init, 1568K bss, 120592K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:4352 nr_irqs:616 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] bootconsole [uart0] disabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 119453777892 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2593.991 MHz processor
[    0.000270] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.98 BogoMIPS (lpj=2593991)
[    0.002035] pid_max: default: 32768 minimum: 301
[    0.002853] ACPI: Core revision 20150930
[    0.005665] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.006864] Security Framework initialized
[    0.007613] AppArmor: AppArmor initialized
[    0.008371] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.009534] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.011398] Initializing cgroup subsys io
[    0.012075] Initializing cgroup subsys memory
[    0.012871] Initializing cgroup subsys devices
[    0.013786] Initializing cgroup subsys freezer
[    0.015013] Disabled fast string operations
[    0.016015] CPU: Physical Processor ID: 0
[    0.016893] CPU: Processor Core ID: 0
[    0.024733] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.026124] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.027295] Speculative Store Bypass: Vulnerable
[    0.043891] Freeing SMP alternatives memory: 24K
[    0.046607] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.048903] Switched APIC routing to physical flat.
[    0.054996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066321] TSC deadline timer enabled
[    0.067077] smpboot: CPU0: Intel(R) Core(TM) i7-4960HQ CPU @ 2.60GHz (family: 0x6, model: 0x46, stepping: 0x1)
[    0.068868] Performance Events: unsupported p6 CPU model 70 no PMU driver, software events only.
[    0.073019] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.074186] NMI watchdog: Shutting down hard lockup detector on all cpus
[    0.076132] x86: Booting SMP configuration:
[    0.076946] .... node  #0, CPUs:        #1
[    0.083306] Disabled fast string operations
[    0.092943] x86: Booted up 1 node, 2 CPUs
[    0.093614] smpboot: Total of 2 processors activated (10375.96 BogoMIPS)
[    0.114414] devtmpfs: initialized
[    0.115524] PM: Registering ACPI NVS region [mem 0x7fffb000-0x7fffffff] (20480 bytes)
[    0.116989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.118689] futex hash table entries: 8192 (order: 7, 524288 bytes)
[    0.121449] NET: Registered protocol family 16
[    0.127197] cpuidle: using governor ladder
[    0.133383] cpuidle: using governor menu
[    0.134126] ACPI: bus type PCI registered
[    0.135157] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xfc000000-0xfcffffff] (base 0xfc000000)
[    0.136722] PCI: not using MMCONFIG
[    0.137298] PCI: Using configuration type 1 for base access
[    0.148396] ACPI: Added _OSI(Module Device)
[    0.149193] ACPI: Added _OSI(Processor Device)
[    0.150019] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.150865] ACPI: Added _OSI(Processor Aggregator Device)
[    0.152885] ACPI: Executed 1 blocks of module-level executable AML code
[    0.154542] \_SB_:_OSC invalid UUID
[    0.155117] _OSC request data:1 e 
[    0.156813] ACPI : EC: EC started
[    0.157402] ACPI: Interpreter enabled
[    0.158064] ACPI: (supports S0 S4 S5)
[    0.158690] ACPI: Using IOAPIC for interrupt routing
[    0.159695] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xfc000000-0xfcffffff] (base 0xfc000000)
[    0.161413] PCI: MMCONFIG at [mem 0xfc000000-0xfcffffff] reserved in ACPI motherboard resources
[    0.162923] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.179939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
[    0.181020] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.182376] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.183515] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge
[    0.185353] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with reserved [mem 0x000dc000-0x000fffff])
[    0.187636] PCI host bridge to bus 0000:00
[    0.188322] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.189486] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.190693] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.191976] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
[    0.193254] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfebfffff window]
[    0.194597] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.195570] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
[    0.197600] pci 0000:00:01.0: [8086:2981] type 01 class 0x060401
[    0.199678] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.201156] pci 0000:00:03.0: [1ab8:4000] type 00 class 0xff0000
[    0.202476] pci 0000:00:03.0: reg 0x10: [io  0x8000-0x801f]
[    0.204490] pci 0000:00:05.0: [8086:100f] type 00 class 0x020000
[    0.205949] pci 0000:00:05.0: reg 0x10: [mem 0xee000000-0xee01ffff]
[    0.207658] pci 0000:00:05.0: reg 0x1c: [io  0x8200-0x821f]
[    0.211041] pci 0000:00:0a.0: [1011:0022] type 01 class 0x060400
[    0.212686] pci 0000:00:0e.0: [1af4:1002] type 00 class 0x050000
[    0.213907] pci 0000:00:0e.0: reg 0x10: [io  0xb000-0xb01f]
[    0.215746] pci 0000:00:0f.0: [1000:0030] type 00 class 0x010000
[    0.217218] pci 0000:00:0f.0: reg 0x10: [io  0xb200-0xb2ff]
[    0.218424] pci 0000:00:0f.0: reg 0x14: [mem 0xef100000-0xef1003ff 64bit]
[    0.219743] pci 0000:00:0f.0: reg 0x1c: [mem 0xef140000-0xef14ffff]
[    0.221664] pci 0000:00:0f.0: PME# supported from D1 D2
[    0.223157] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.225016] pci 0000:00:1d.0: reg 0x20: [io  0xb400-0xb41f]
[    0.226905] pci 0000:00:1d.6: [1033:0194] type 00 class 0x0c0330
[    0.228590] pci 0000:00:1d.6: reg 0x10: [mem 0xef180000-0xef180fff]
[    0.231139] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.233050] pci 0000:00:1d.7: reg 0x10: [mem 0xef1c0000-0xef1c03ff]
[    0.235616] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[    0.237519] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[    0.239894] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
[    0.241751] pci 0000:00:1f.1: [8086:244b] type 00 class 0x010180
[    0.243482] pci 0000:00:1f.1: reg 0x20: [io  0xe000-0xe00f]
[    0.244697] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.245926] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.247201] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.248742] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.251081] pci 0000:00:1f.2: [8086:2821] type 00 class 0x010601
[    0.252764] pci 0000:00:1f.2: reg 0x10: [io  0xe200-0xe207]
[    0.253961] pci 0000:00:1f.2: reg 0x14: [io  0xe400-0xe403]
[    0.255301] pci 0000:00:1f.2: reg 0x18: [io  0xe600-0xe607]
[    0.256640] pci 0000:00:1f.2: reg 0x1c: [io  0xe800-0xe803]
[    0.257937] pci 0000:00:1f.2: reg 0x20: [io  0xea00-0xea0f]
[    0.259354] pci 0000:00:1f.2: reg 0x24: [mem 0xf0200000-0xf0201fff]
[    0.261177] pci 0000:00:1f.2: PME# supported from D3hot
[    0.262431] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.263810] pci 0000:00:1f.3: reg 0x10: [mem 0xf0240000-0xf0240fff]
[    0.265617] pci 0000:00:1f.3: reg 0x20: [io  0xec00-0xec1f]
[    0.267832] pci 0000:01:00.0: [1af4:1050] type 00 class 0x030000
[    0.269413] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xb3ffffff pref]
[    0.270750] pci 0000:01:00.0: reg 0x14: [mem 0xe2000000-0xe2000fff]
[    0.272219] pci 0000:01:00.0: reg 0x18: [io  0x6000-0x601f]
[    0.273634] pci 0000:01:00.0: reg 0x20: [mem 0xe2040000-0xe2043fff]
[    0.275173] pci 0000:01:00.0: reg 0x30: [mem 0xe2080000-0xe208ffff pref]
[    0.277072] pci 0000:00:01.0: PCI bridge to [bus 01] (subtractive decode)
[    0.278295] pci 0000:00:01.0:   bridge window [io  0x6000-0x7fff]
[    0.279342] pci 0000:00:01.0:   bridge window [mem 0xe2000000-0xedffffff]
[    0.280595] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
[    0.282064] pci 0000:00:01.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.283731] pci 0000:00:01.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.285179] pci 0000:00:01.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.286794] pci 0000:00:01.0:   bridge window [mem 0x000c0000-0x000cffff window] (subtractive decode)
[    0.288399] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xfebfffff window] (subtractive decode)
[    0.290734] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.291620] pci 0000:00:0a.0:   bridge window [io  0x9000-0xafff]
[    0.292717] pci 0000:00:0a.0:   bridge window [mem 0xee100000-0xef0fffff]
[    0.293906] pci 0000:00:0a.0:   bridge window [mem 0xe0000000-0xe0ffffff pref]
[    0.295816] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.297050] pci 0000:00:1e.0:   bridge window [io  0xc000-0xdfff]
[    0.298246] pci 0000:00:1e.0:   bridge window [mem 0xef200000-0xf01fffff]
[    0.299693] pci 0000:00:1e.0:   bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
[    0.301068] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.302515] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.303961] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.305519] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000cffff window] (subtractive decode)
[    0.307038] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xfebfffff window] (subtractive decode)
[    0.308864] pci_bus 0000:00: on NUMA node 0
[    0.309690] pci 0000:00:01.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  128
[    0.311112] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20150930/pci_link-174)
[    0.317323] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.318320] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.319843] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.320807] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.322288] vgaarb: loaded
[    0.322742] vgaarb: bridge control possible 0000:01:00.0
[    0.323969] SCSI subsystem initialized
[    0.324828] libata version 3.00 loaded.
[    0.325526] pps_core: LinuxPPS API ver. 1 registered
[    0.326428] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.328091] PTP clock support registered
[    0.328985] EDAC MC: Ver: 3.0.0
[    0.330353] PCI: Using ACPI for IRQ routing
[    0.336840] PCI: pci_cache_line_size set to 64 bytes
[    0.338158] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.339201] e820: reserve RAM buffer [mem 0x7ffec000-0x7fffffff]
[    0.340780] clocksource: Switched to clocksource hpet
[    0.359979] AppArmor: AppArmor Filesystem Enabled
[    0.360933] pnp: PnP ACPI init
[    0.361958] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.363421] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
[    0.364873] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.366165] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[    0.367487] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.368969] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.370041] system 00:04: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.371228] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372606] pnp 00:05: Plug and Play ACPI device, IDs PNP0500 (active)
[    0.378081] pnp: PnP ACPI: found 6 devices
[    0.395612] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.397451] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.398407] pci 0000:00:01.0:   bridge window [io  0x6000-0x7fff]
[    0.399543] pci 0000:00:01.0:   bridge window [mem 0xe2000000-0xedffffff]
[    0.400775] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xdfffffff 64bit pref]
[    0.402234] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.403158] pci 0000:00:0a.0:   bridge window [io  0x9000-0xafff]
[    0.404296] pci 0000:00:0a.0:   bridge window [mem 0xee100000-0xef0fffff]
[    0.405546] pci 0000:00:0a.0:   bridge window [mem 0xe0000000-0xe0ffffff pref]
[    0.407000] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.407940] pci 0000:00:1e.0:   bridge window [io  0xc000-0xdfff]
[    0.409081] pci 0000:00:1e.0:   bridge window [mem 0xef200000-0xf01fffff]
[    0.410307] pci 0000:00:1e.0:   bridge window [mem 0xe1000000-0xe1ffffff 64bit pref]
[    0.411784] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.412907] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.414013] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.415235] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window]
[    0.416450] pci_bus 0000:00: resource 8 [mem 0xb0000000-0xfebfffff window]
[    0.417672] pci_bus 0000:01: resource 0 [io  0x6000-0x7fff]
[    0.418749] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xedffffff]
[    0.419852] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xdfffffff 64bit pref]
[    0.421218] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.422338] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.423654] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.425056] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000cffff window]
[    0.426382] pci_bus 0000:01: resource 8 [mem 0xb0000000-0xfebfffff window]
[    0.427652] pci_bus 0000:02: resource 0 [io  0x9000-0xafff]
[    0.428671] pci_bus 0000:02: resource 1 [mem 0xee100000-0xef0fffff]
[    0.429804] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe0ffffff pref]
[    0.431058] pci_bus 0000:03: resource 0 [io  0xc000-0xdfff]
[    0.432269] pci_bus 0000:03: resource 1 [mem 0xef200000-0xf01fffff]
[    0.433603] pci_bus 0000:03: resource 2 [mem 0xe1000000-0xe1ffffff 64bit pref]
[    0.434905] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.436015] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.437266] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.438532] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000cffff window]
[    0.439763] pci_bus 0000:03: resource 8 [mem 0xb0000000-0xfebfffff window]
[    0.441011] NET: Registered protocol family 2
[    0.442001] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.443346] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.444553] TCP: Hash tables configured (established 16384 bind 16384)
[    0.446009] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.447190] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.448475] NET: Registered protocol family 1
[    0.450553] pci 0000:01:00.0: Video device with shadowed ROM
[    0.451656] PCI: CLS 0 bytes, default 64
[    1.178347] Trying to unpack rootfs image as initramfs...
[    1.311650] Freeing initrd memory: 36988K
[    1.315567] redpill: loading out-of-tree module taints kernel.
[    1.316783] redpill: module verification failed: signature and/or required key missing - tainting kernel
[    1.334273] PCI host bridge to bus 0001:09
[    1.335077] pci_bus 0001:09: root bus resource [io  0x0000-0xffff]
[    1.336229] pci_bus 0001:09: root bus resource [mem 0x00000000-0xfffffffff]
[    1.337795] pci_bus 0001:09: root bus resource [bus 00-ff]
[    1.338910] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601
[    1.340062] pci 0001:09:00.0: Can't map mv9235 registers
[    1.341091] PCI host bridge to bus 0001:0c
[    1.341857] pci_bus 0001:0c: root bus resource [io  0x0000-0xffff]
[    1.342959] pci_bus 0001:0c: root bus resource [mem 0x00000000-0xfffffffff]
[    1.344244] pci_bus 0001:0c: busn_res: can not insert [bus 0c-ff] under domain [bus 00-ff] (conflicts with (null) [bus 09-ff])
[    1.347103] pci_bus 0001:0c: root bus resource [bus 00-ff]
[    1.348613] pci 0001:0c:00.0: [1b4b:9235] type 00 class 0x010601
[    1.350321] pci 0001:0c:00.0: Can't map mv9235 registers
[    1.373549] audit: initializing netlink subsys (disabled)
[    1.374583] audit: type=2000 audit(1673370657.290:1): initialized
[    1.375914] Initialise system trusted keyring
[    1.418478] VFS: Disk quotas dquot_6.6.0
[    1.419260] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.773898] Key type asymmetric registered
[    1.774592] Asymmetric key parser 'x509' registered
[    1.775593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.776954] io scheduler noop registered
[    1.777849] io scheduler deadline registered
[    1.778785] io scheduler cfq registered (default)
[    2.374891] tsc: Refined TSC clocksource calibration: 2593.995 MHz
[    2.376040] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256413873f2, max_idle_ns: 440795261455 ns
[    2.751695] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.753187] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16450
[    2.861847] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.903984] brd: module loaded
[    2.904621] lpc_ich 0000:00:1f.0: RCBA is disabled by hardware/BIOS, device disabled
[    2.906027] ACPI Warning: SystemIO range 0x0000000000004028-0x000000000000402F conflicts with OpRegion 0x0000000000004000-0x000000000000404E (\PMIO) (20150930/utaddress-254)
[    2.908885] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.910674] Unknown LPC device 2810
[    2.911442] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.912591] Loading iSCSI transport class v2.0-870.
[    2.964805] rdac: device handler registered
[    3.008529] i2c /dev entries driver
[    3.009340] i801_smbus 0000:00:1f.3: Enabling SMBus device
[    3.010410] i801_smbus 0000:00:1f.3: SMBus using polling
[    3.035264] ahci 0000:00:1f.2: version 3.0
[    3.036551] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.038040] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    3.039443] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led only slum part 
[    3.135435] scsi host0: ahci
[    3.138580] scsi host1: ahci
[    3.142155] scsi host2: ahci
[    3.148935] scsi host3: ahci
[    3.154950] scsi host4: ahci
[    3.160577] scsi host5: ahci
[    3.161243] ata1: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200100 irq 24
[    3.162698] ata2: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200180 irq 24
[    3.164376] ata3: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200200 irq 24
[    3.165772] ata4: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200280 irq 24
[    3.167380] ata5: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200300 irq 24
[    3.168755] ata6: SATA max UDMA/133 abar m8192@0xf0200000 port 0xf0200380 irq 24
[    3.170119] ahci: probe of 0001:09:00.0 failed with error -22
[    3.171421] ahci: probe of 0001:0c:00.0 failed with error -22
[    3.175297] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    3.176790] rtc_cmos 00:02: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    3.178582] md: raid1 personality registered for level 1
[    3.180437] NET: Registered protocol family 17
[    3.181351] Key type dns_resolver registered
[    3.206861] mce: Using 0 MCE banks
[    3.222129] registered taskstats version 1
[    3.222949] Loading compiled-in untrusted X.509 certificates
[    3.223997] Loading compiled-in X.509 certificates
[    3.225036] Loaded X.509 cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[    3.251592] Loaded X.509 cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[    3.254010] Loaded X.509 cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[    3.256934] Loaded X.509 cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[    3.259119] page_owner is disabled
[    3.260302] AppArmor: AppArmor sha1 policy hashing enabled
[    3.265423] rtc_cmos 00:02: setting system clock to 2023-01-10 17:10:59 UTC (1673370659)
[    3.380052] clocksource: Switched to clocksource tsc
[    3.482575] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.484059] ata4: SATA link down (SStatus 0 SControl 300)
[    3.485184] ata2: SATA link down (SStatus 0 SControl 300)
[    3.486546] ata5: SATA link down (SStatus 0 SControl 300)
[    3.487687] ata6: SATA link down (SStatus 0 SControl 300)
[    3.488844] ata3: SATA link down (SStatus 0 SControl 300)
[    3.489868] ata1.00: ATA-8: arpl, F.V7ZTD0, max UDMA/100
[    3.490834] ata1.00: 1024128 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    3.492036] ata1.00: SN:FV4RAWDFDNEMXDBHXXBY
[    3.493106] ata1.00: configured for UDMA/100
[    3.493892] ata1.00: Find SSD disks. [arpl]
[    3.495457] scsi 0:0:0:0: Direct-Access     ATA      arpl                     ZTD0 PQ: 0 ANSI: 5
[    3.497245] ata1.00: Enabling discard_zeroes_data
[    3.498593] ata1.00: Enabling discard_zeroes_data
[    3.499663] sd 0:0:0:0: [synoboot] 1024128 512-byte logical blocks: (524 MB/500 MiB)
[    3.501648] sd 0:0:0:0: [synoboot] Write Protect is off
[    3.502582] sd 0:0:0:0: [synoboot] Mode Sense: 00 3a 00 00
[    3.503687] sd 0:0:0:0: [synoboot] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.505570] ata1.00: Enabling discard_zeroes_data
[    3.507876]  synoboot: synoboot1 synoboot2 synoboot3
[    3.509260] ata1.00: Enabling discard_zeroes_data
[    3.511436] sd 0:0:0:0: [synoboot] Attached SCSI disk
[    3.513624] Freeing unused kernel memory: 924K
[    3.514530] Write protecting the kernel read-only data: 8192k
[    3.515959] Freeing unused kernel memory: 584K
[    3.517151] Freeing unused kernel memory: 268K
START /linuxrc.syno
START /linuxrc.syno.impl
[    3.716906] random: nonblocking pool is initialized
addons.sh called with params early
Insert Marvell 1475 SATA controller driver
insmod: can't insert '/lib/modules/mv14xx.ko': No such file or directory
Insert basic USB modules...
addons.sh calle[    3.808655] udevd[4425]: starting version 3.2.11
d [    3.809889] udevd[4425]: specified group 'tty' unknown
[    3.810840] udevd[4425]: specified group 'dialout' unknown
w[    3.811835] udevd[4425]: specified group 'kmem' unknown
[    3.812808] udevd[4425]: specified group 'input' unknown
[    3.813814] udevd[4425]: specified group 'video' unknown
i[    3.814856] udevd[4425]: specified group 'audio' unknown
t[    3.815956] udevd[4425]: specified group 'disk' unknown
[    3.816916] udevd[4425]: specified group 'cdrom' unknown
[    3.817878] udevd[4425]: specified group 'tape' unknown
h[    3.818853] udevd[4425]: specified group 'kvm' unknown
 params modules
Starting eudev daemon
Triggering add[    3.830081] udevd[4426]: starting eudev-3.2.11
[    3.831327] udevd[4426]: specified group 'tty' unknown
[    3.832323] udevd[4426]: specified group 'dialout' unknown
[    3.833371] udevd[4426]: specified group 'kmem' unknown
[    3.834337] udevd[4426]: specified group 'input' unknown
[    3.835295] udevd[4426]: specified group 'video' unknown
 events [    3.837868] udevd[4426]: specified group 'audio' unknown
[    3.838971] udevd[4426]: specified group 'disk' unknown
t[    3.839912] udevd[4426]: specified group 'cdrom' unknown
[    3.840888] udevd[4426]: specified group 'tape' unknown
o[    3.841907] udevd[4426]: specified group 'kvm' unknown
 udev
insmod: can[   14.032336] broadwellnk_synobios: module license 'Synology Inc.' taints kernel.
[   14.033597] Disabling lock debugging due to kernel taint
't insert '/lib/modules/etxhci[   14.040390] synobios open /dev/ttyS1 success
-h[   14.041541] 2023-1-10 17:11:10 UTC
[   14.042235] synobios: load, major number 201
[   14.043081] Brand: Synology
[   14.043563] Model: DS-3622xs+
[   14.044152] set group disks wakeup number to 4, spinup time deno 7
[   14.045259] synobios cpu_arch proc entry initialized
[   14.046157] synobios crypto_hw proc entry initialized
[   14.047049] synobios syno_platform proc entry initialized
cd.ko': No such file or directory
In[   14.054842] Module [broadwellnk_synobios] is removed. 
s[   14.055677] synobios: unload
ert net driver(Mindspeed only)...
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
addons.sh called with params patches
Model maxdisks=12
Adjust maxdisks and internalportcfg automatically
maxdisks=12
internalportcfg=0xfff
Insert synorbd kernel module
Insert synofsbd kernel module
Insert sha256 kernel module
All disk ready or timeout execeed
Exit on error [1] DISK NOT INSTALLED...
Tue Jan 10 17:11:10 UTC 2023
addons.sh called with params jrExit
none /sys/kernel/debug debugfs rw,relatime 0 0
umount: /etc/mtab: No such file or directory

linuxrc.syno failed on 1

starting pid 4537, tty '': '/etc/rc'
:: Starting /etc/rc
:: Mounting procfs ... [  OK  ]
:: Mounting tmpfs ... [  OK  ]
:: Mounting devtmpfs ... [  OK  ]
:: Mounting devpts ... [  OK  ]
:: Mounting sysfs ... [  OK  ]
:: Loading module fat ... [  OK  ]
:: Loading module vfat ... [  OK  ]
:: Loading module udp_tunnel ... [  OK  ]
:: Loading module ip6_udp_tunnel ... [  OK  ]
:: Loading module vxlan ... [  OK  ]
:: Loading module r8168 ... [  OK  ]
:: Loading module sunrpc[   14.560366] RPC: Registered named UNIX socket transport module.
[   14.561483] RPC: Registered udp transport module.
[   14.562382] RPC: Registered tcp transport module.
[   14.563244] RPC: Registered tcp NFSv4.1 backchannel transport module.
 ... [  OK  ]
:: Loading module lockd[   14.573459] lockd: Unknown symbol locks_end_grace (err 0)
[   14.574468] lockd: Unknown symbol locks_in_grace (err 0)
[   14.575491] lockd: Unknown symbol locks_start_grace (err 0)
[   14.581103] lockd: Unknown symbol locks_end_grace (err 0)
[   14.582332] lockd: Unknown symbol locks_in_grace (err 0)
[   14.583351] lockd: Unknown symbol locks_start_grace (err 0)
 ... [FAILED]
:: Loading module nfs[   14.600240] nfs: Unknown symbol nlmclnt_init (err 0)
[   14.601175] nfs: Unknown symbol nlmclnt_done (err 0)
[   14.608584] nfs: Unknown symbol nlmclnt_init (err 0)
[   14.609512] nfs: Unknown symbol nlmclnt_done (err 0)
 ... [FAILED]
:: Loading module nfsv3[   14.626339] nfsv3: Unknown symbol nfs_clone_server (err 0)
[   14.627931] nfsv3: Unknown symbol nlmclnt_proc (err 0)
[   14.629241] nfsv3: Unknown symbol nfs_writeback_update_inode (err 0)
[   14.630856] nfsv3: Unknown symbol nfs_alloc_client (err 0)
[   14.632162] nfsv3: Unknown symbol nfs_dentry_operations (err 0)
[   14.633893] nfsv3: Unknown symbol nfs_wb_all (err 0)
[   14.635567] nfsv3: Unknown symbol nfs_submount (err 0)
[   14.637027] nfsv3: Unknown symbol nfs_mknod (err 0)
[   14.638680] nfsv3: Unknown symbol nfs_create_server (err 0)
[   14.640412] nfsv3: Unknown symbol nfs_init_client (err 0)
[   14.641982] nfsv3: Unknown symbol nfs_post_op_update_inode (err 0)
[   14.643837] nfsv3: Unknown symbol nfs_create (err 0)
[   14.645362] nfsv3: Unknown symbol nfs_mkdir (err 0)
[   14.646773] nfsv3: Unknown symbol nfs_get_client (err 0)
[   14.648117] nfsv3: Unknown symbol nfs_file_operations (err 0)
[   14.649821] nfsv3: Unknown symbol nfs_rename (err 0)
[   14.651166] nfsv3: Unknown symbol nfs_lookup (err 0)
[   14.652359] nfsv3: Unknown symbol nfs_invalidate_atime (err 0)
[   14.653901] nfsv3: Unknown symbol nfs_getattr (err 0)
[   14.655102] nfsv3: Unknown symbol register_nfs_version (err 0)
[   14.656438] nfsv3: Unknown symbol nfs_fs_type (err 0)
[   14.657860] nfsv3: Unknown symbol nfs_setattr (err 0)
[   14.659195] nfsv3: Unknown symbol nfs_fattr_init (err 0)
[   14.660775] nfsv3: Unknown symbol nfs_init_timeout_values (err 0)
[   14.662391] nfsv3: Unknown symbol nfs_alloc_fattr (err 0)
[   14.663875] nfsv3: Unknown symbol nfs_rmdir (err 0)
[   14.665221] nfsv3: Unknown symbol unregister_nfs_version (err 0)
[   14.666850] nfsv3: Unknown symbol nfs_setattr_update_inode (err 0)
[   14.668511] nfsv3: Unknown symbol nfs_sops (err 0)
[   14.669863] nfsv3: Unknown symbol nfs_instantiate (err 0)
[   14.671101] nfsv3: Unknown symbol nfs_link (err 0)
[   14.672170] nfsv3: Unknown symbol nfs_permission (err 0)
[   14.673948] nfsv3: Unknown symbol nfs_try_mount (err 0)
[   14.675454] nfsv3: Unknown symbol nfs_free_client (err 0)
[   14.676996] nfsv3: Unknown symbol nfs_close_context (err 0)
[   14.678696] nfsv3: Unknown symbol nfs_refresh_inode (err 0)
[   14.680115] nfsv3: Unknown symbol nfs_symlink (err 0)
[   14.681528] nfsv3: Unknown symbol nfs_unlink (err 0)
[   14.694947] nfsv3: Unknown symbol nfs_clone_server (err 0)
[   14.696609] nfsv3: Unknown symbol nlmclnt_proc (err 0)
[   14.697979] nfsv3: Unknown symbol nfs_writeback_update_inode (err 0)
[   14.700061] nfsv3: Unknown symbol nfs_alloc_client (err 0)
[   14.701639] nfsv3: Unknown symbol nfs_dentry_operations (err 0)
[   14.702987] nfsv3: Unknown symbol nfs_wb_all (err 0)
[   14.704133] nfsv3: Unknown symbol nfs_submount (err 0)
[   14.705488] nfsv3: Unknown symbol nfs_mknod (err 0)
[   14.707170] nfsv3: Unknown symbol nfs_create_server (err 0)
[   14.708891] nfsv3: Unknown symbol nfs_init_client (err 0)
[   14.710401] nfsv3: Unknown symbol nfs_post_op_update_inode (err 0)
[   14.712469] nfsv3: Unknown symbol nfs_create (err 0)
[   14.714178] nfsv3: Unknown symbol nfs_mkdir (err 0)
[   14.715791] nfsv3: Unknown symbol nfs_get_client (err 0)
[   14.717989] nfsv3: Unknown symbol nfs_file_operations (err 0)
[   14.719578] nfsv3: Unknown symbol nfs_rename (err 0)
[   14.721345] nfsv3: Unknown symbol nfs_lookup (err 0)
[   14.722935] nfsv3: Unknown symbol nfs_invalidate_atime (err 0)
[   14.724556] nfsv3: Unknown symbol nfs_getattr (err 0)
[   14.726007] nfsv3: Unknown symbol register_nfs_version (err 0)
[   14.727347] nfsv3: Unknown symbol nfs_fs_type (err 0)
[   14.728644] nfsv3: Unknown symbol nfs_setattr (err 0)
[   14.729843] nfsv3: Unknown symbol nfs_fattr_init (err 0)
[   14.731067] nfsv3: Unknown symbol nfs_init_timeout_values (err 0)
[   14.732434] nfsv3: Unknown symbol nfs_alloc_fattr (err 0)
[   14.733505] nfsv3: Unknown symbol nfs_rmdir (err 0)
[   14.734451] nfsv3: Unknown symbol unregister_nfs_version (err 0)
[   14.735549] nfsv3: Unknown symbol nfs_setattr_update_inode (err 0)
[   14.736668] nfsv3: Unknown symbol nfs_sops (err 0)
[   14.737559] nfsv3: Unknown symbol nfs_instantiate (err 0)
[   14.739041] nfsv3: Unknown symbol nfs_link (err 0)
[   14.741000] nfsv3: Unknown symbol nfs_permission (err 0)
[   14.742958] nfsv3: Unknown symbol nfs_try_mount (err 0)
[   14.746330] nfsv3: Unknown symbol nfs_free_client (err 0)
[   14.749899] nfsv3: Unknown symbol nfs_close_context (err 0)
[   14.752870] nfsv3: Unknown symbol nfs_refresh_inode (err 0)
[   14.754472] nfsv3: Unknown symbol nfs_symlink (err 0)
[   14.757595] nfsv3: Unknown symbol nfs_unlink (err 0)
 ... [FAILED]
cat: can't open '/sys/class/hwmon/hwmon0/device/name': No such file or directory
Can not detect ADT device, Retry: 1...
:: Unloading module i2c-i801[   15.811828] Module [i2c_i801] is removed. 
 ... [FAILED]
cat: can't open '/sys/class/hwmon/hwmon0/device/name': No such file or directory
Can not detect ADT device, Retry: 2...
:: Unloading module i2c-i801[   17.852466] Module [i2c_i801] is removed. 
 ... [FAILED]
cat: can't open '/sys/class/hwmon/hwmon0/device/name': No such file or directory
Can not detect ADT device, Retry: 3...
:: Unloading module i2c-i801[   19.889890] Module [i2c_i801] is removed. 
 ... [FAILED]
[   20.933235] synobios open /dev/ttyS1 success
[   20.934437] 2023-1-10 17:11:17 UTC
[   20.935091] synobios: load, major number 201
[   20.935840] Brand: Synology
[   20.936321] Model: DS-3622xs+
[   20.936869] set group disks wakeup number to 4, spinup time deno 7
[   20.937939] synobios cpu_arch proc entry initialized
[   20.938853] synobios crypto_hw proc entry initialized
[   20.939821] synobios syno_platform proc entry initialized
mknod: /dev/synobios: File exists
Starting SW init...
[   21.559522] Module [broadwellnk_synobios] is removed. 
[   21.560457] synobios: unload
mount: mounting /dev/bus/usb on /proc/bus/usb failed: No such file or directory
ln: /proc/bus/usb/devices: No such file or directory
:: Loading module synobios[   21.606296] synobios open /dev/ttyS1 success
[   21.607466] 2023-1-10 17:11:17 UTC
[   21.608120] synobios: load, major number 201
[   21.608866] Brand: Synology
[   21.609354] Model: DS-3622xs+
[   21.609914] set group disks wakeup number to 4, spinup time deno 7
[   21.610973] synobios cpu_arch proc entry initialized
[   21.611943] synobios crypto_hw proc entry initialized
[   21.612851] synobios syno_platform proc entry initialized
 ... [  OK  ]
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

:: Starting syslogd ... [  OK  ]
:: Starting scemd
:: Starting services in background
Starting JuniorExpansionPack
Starting findhostd in flash_rd...
Starting services in flash_rd...
Running /usr/syno/etc/rc.d/J01httpd.sh...
Starting httpd:80 in flash_rd...
Starting httpd:5000 in flash_rd...
Running /usr/syno/etc/rc.d/J03ssdpd.sh...
/usr/bin/minissdpd
Usage: /usr/bin/minissdpd [-d] [-6] [-s socket] [-p pidfile] -i <interface> [-i <interface2>] ...

  <interface> is either an IPv4 address such as 192.168.1.42, or an
interface name such as eth0.

  By default, socket will be open as /var/run/minissdpd.sock
and pid written to file /var/run/minissdpd.pid
start SSDPD failed
Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
Starting synoagentregisterd...
Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
cat: can't open '/sys/block/sd*/device//model': No such file or directory
Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
ADT Set FAN SPEED
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 41: can't create /tmp/ADTFanPath//pwm1_high_freq: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 43: can't create /tmp/ADTFanPath//pwm1_syno_control: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 50: can't create /tmp/ADTFanPath//pwm1: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 41: can't create /tmp/ADTFanPath//pwm2_high_freq: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 43: can't create /tmp/ADTFanPath//pwm2_syno_control: nonexistent directory
/usr/syno/etc/rc.d/J80ADTFanControl.sh: line 50: can't create /tmp/ADTFanPath//pwm2: nonexistent directory
Running /usr/syno/etc/rc.d/J98nbnsd.sh...
Starting nbnsd...
Running /usr/syno/etc/rc.d/J99avahi.sh...
Starting Avahi mDNS/DNS-SD Daemon
cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
Excution Error
============ Date ============
Tue Jan 10 17:11:24 UTC 2023
==============================
addons.sh called with params rcExit

starting pid 5692, tty '': '/sbin/getty 115200 console'

Tue Jan 10 17:11:24 2023

SynologyNAS login: 

[MartinKuhl]

yes I know first harddisk is not SATA it is SCSI but this is intended any nessessary for parallels vm. That configuration was working fine with all beta versions before.

[fbelavenuto]

Some module is missing! Please type "lspci -nnk" inside the ARPL shell and post the result

[MartinKuhl]

00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02)
        Subsystem: Parallels, Inc. 82P965/G965 Memory Controller Hub [1ab8:0400]
00:01.0 PCI bridge [0604]: Intel Corporation 82G35 Express PCI Express Root Port [8086:2981] (rev 02)
        Kernel driver in use: pcieport
00:03.0 Unassigned class [ff00]: Parallels, Inc. Virtual Machine Communication Interface [1ab8:4000]
        Subsystem: Parallels, Inc. Virtual Machine Communication Interface [1ab8:0400]
00:05.0 Ethernet controller [0200]: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) [8086:100f]
        Subsystem: Parallels, Inc. 82545EM Gigabit Ethernet Controller (Copper) [1ab8:0400]
        Kernel driver in use: e1000
        Kernel modules: e1000
00:0a.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21150 [1011:0022]
00:0e.0 RAM memory [0500]: Red Hat, Inc. Virtio memory balloon [1af4:1002]
        Subsystem: Parallels, Inc. Virtio memory balloon [1ab8:0005]
        Kernel modules: virtio_pci
00:0f.0 SCSI storage controller [0100]: Broadcom / LSI 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030]
        Subsystem: Parallels, Inc. 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1ab8:0400]
        Kernel driver in use: mptspi
        Kernel modules: mptspi
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 02)
        Subsystem: Parallels, Inc. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI [1ab8:0400]
        Kernel driver in use: uhci_hcd
00:1d.6 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
        Subsystem: Parallels, Inc. uPD720200 USB 3.0 Host Controller [1ab8:0400]
        Kernel driver in use: xhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 02)
        Subsystem: Parallels, Inc. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [1ab8:0400]
        Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02)
        Subsystem: Parallels, Inc. 82801HB/HR (ICH8/R) LPC Interface Controller [1ab8:0400]
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 05)
        Subsystem: Parallels, Inc. 82801BA IDE U100 Controller [1ab8:0400]
        Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2821] (rev 02)
        Subsystem: Parallels, Inc. 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA Controller [AHCI mode] [1ab8:0400]
        Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
        Subsystem: Parallels, Inc. 82801H (ICH8 Family) SMBus Controller [1ab8:0400]
        Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: Red Hat, Inc. Virtio GPU [1af4:1050] (rev 01)
        Subsystem: Parallels, Inc. Virtio GPU [1ab8:0010]
        Kernel driver in use: virtio-pci
        Kernel modules: virtio_pci

[fbelavenuto]

Ok, is e1000. Please go to advanced menu, modules and choose select all modules. Rebuild the loader and test again.

[MartinKuhl]

And now it's back again! Thanks a lot. I thought that all modules are selected per default or the same modules from the previous version. Ok now I know that I have to select these option after an upcoming update again.

[MartinKuhl]

@fbelavenuto thanks for your very very fast response and help