Open minimoonleaf opened 1 year ago
You can post output of: "lspci -nnk" in loader and best you add addon "console" and do the same command there. i see your board has a i225/226 chip. so it should be supported.
i know there are some bugs with settings in bios: 1. disable memory remap 2. disable pxe 3. please use uefi boot and not csm 4. disbale fastboot and quiteboot
Try with only 2x HDD Its stop working when U have more than disk drivers.
Try with only 2x HDD Its stop working when U have more than disk drivers.
this bug is fixed since about 2 months
1.Web connect IP:7681 and choose model 42962 and other setting...than addon "console". 2.Build the loader 3.Boot the loader...the screen wait 1 min display "ARPL console - wait..." The screen shows ARPL console - wait... After that, there is no response... Then continue to wait for about 5~10 minutes and the screen will all disappear https://photos.app.goo.gl/8DDN7Ff76SCAPADGA
I have try to use another loader "Yet Another Jun`s Mod x RedPill" and I have not encountered the situation that the IP will be stuck and cannot come out
the console addon is has a bug. but you don't need it. and please do not select every addon that you don't need. select the addons you need and everything is fine.
I try remove addon:console and build and Booting... In the display Welcome to Automated Redpill Loader v1.1-beta2a Model:DS3622xs+ Build: 42962 Cmdline: (There are many parameters displayed, so I won’t list them one by one) IP:192.168.100.3 Loading Kernel:... Booting... root@arpl:/opt/arpl# It can still input text in the first 3 seconds or so, at this time Ping IP will also show connection, but when 3 seconds pass, Ping will show disconnection, and screen can no longer input any text....
Your Networkchip is a?Am 11.04.2023 um 14:22 schrieb minimoonleaf @.>: I try remove addon:console and build and Booting... In the display Welcome to Automated Redpill Loader v1.1-beta2a Model:DS3622xs+ Build: 42962 Cmdline: (There are many parameters displayed, so I won’t list them one by one) IP:192.168.100.3 Loading Kernel:... Booting... @.:/opt/arpl# It can still input text in the first 3 seconds or so, at this time Ping IP will also show connection, but when 3 seconds pass, Ping will show disconnection, and screen can no longer input any text....
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
this bug is fixed since about 2 months
yes it is. but fixes won‘t be added as inplace update. you need to build a new stick. Am 11.04.2023 um 14:32 schrieb ada-mob @.***>:
this bug is fixed since about 2 months
really?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
yes it is. but fixes won‘t be added as inplace update. you need to build a new stick
I did this, doesn't work :\
use arc from my github and try again
Nope, its not fixed.
pon., 10 kwi 2023, 12:14 użytkownik Christian Schulthess < @.***> napisał:
Try with only 2x HDD Its stop working when U have more than disk drivers.
this bug is fixed since about 2 months
— Reply to this email directly, view it on GitHub https://github.com/fbelavenuto/arpl/issues/701#issuecomment-1501645227, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSEFLKDV6M753FPQ6GIWYDXAPMRLANCNFSM6AAAAAAWXR3YGE . You are receiving this because you commented.Message ID: @.***>
as i wrote before, try arc from my github and report again.
use arc from my github and try again
xpe starts (model 3622xs+), detects the old installation (I previously used the ds1621+ model on arpl), suggests migration, and then an error occurs at the DSM installation stage: the file could not be installed, it may be corrupted. And it doesn't matter: migration with or without saving the configuration, downloading the pat file directly or substituting a local file
can you add a screenshot from sysinfo menu in loader please.
can you add a screenshot from sysinfo menu in loader please.
https://pasteboard.co/lFCa3NsuK5Nl.jpg https://pasteboard.co/khs6xT8oOoi3.jpg
Three things we know:1. You Should disable this NVMe Raid device, there is an option in bios to set this back to normal nvme usage. 2. Please go to Edit User Config and enter in cmdline section: SataPortMap: 8 (you will see the formating of this and you have to add the same amount of spaces like the other commits in this section)3. if you get the controller disabled i mentioned in 1, you can select the DT model you used beforeAm 12.04.2023 um 09:12 schrieb ada-mob @.***>: https://pasteboard.co/lFCa3NsuK5Nl.jpg https://pasteboard.co/khs6xT8oOoi3.jpg
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>
Three things we know
The thing is, i use the nearly the same board. h670m-itx/ac and have no problems, nvme isn't shown as raid device. i can look in my bios later today for the correct settings. have 2 1tb nvme as cache as well. and the sata controller is the same with only usable ports 5-8. so i can tell you, there is a problem in your bios config. i use it with rs4021/ds3622 without any problem with oob loader settings.
You should disable VMD.
https://download.asrock.com/Manual/RAID/H670M-ITXax/English.pdf
You should disable VMD.
my H610 not have this options :\
it's your h610m-itx/ac
it's your h610m-itx/ac
Yes, I looked at the manual and the pictures in it. However, there is no setting of this option https://pasteboard.co/0Hk3I8IuIXEJ.jpg
What I did now: I performed a BIOS reset, did a clean bootloader installation and chose rs4021. Result: there is no nvme controller in sysinfo, DSM installation starts, but is also interrupted with an error at the pat file installation stage
this is strange. picture is from manual of your board.
https://github.com/AuxXxilium/AuxXxilium/wiki/Settings:-Bios-and-UEFI
additional you can look here if something in your bios is different
this is strange.
I think the picture is some kind of common for all models of h610-based ASRock motherboards. I'm surprised too.
Additional BIOS settings according to your recommendations are also implemented
last option: try a different usb stick.
Hm) Of course I will try, but there are no problems with it with numerous installation with two disks or on device tree models
Don't know where the bug is.
I use always same port, problem only now
you can add dbgutils in addons, try to install dsm. if it will fail, send me the logs that you will find in /mnt/p1/logs. you can get the logs thru booted loader. the partitions will be opened for smb, so \Ip\mnt\p1\logs should be the correct adress for windows explorer.
you can add dbgutils in addons, try to install dsm.
last option: try a different usb stick.
no effect
p.s. Another bug: ver 23.04.10 - DSM start (but error on 55-56% progress) ver 23.04.11 - DSM not start. Network not working how desc TC
upd:
Don't know where the bug is.
Can you implement this? https://xpenology.com/forum/topic/68078-script-improvement-thread-for-tgs-boot-waitsh-module/
bootwait is implamented since 6 days. and i fixed another bug that cause install fails on 5-8%.
您的 Networkchip 是?Am 11.04.2023 um 14:22 schrieb minimoonleaf @.>: 我嘗試刪除 addon:console 並構建和引導...在顯示中歡迎使用 Automated Redpill Loader v1.1-beta2a Model:DS3622xs+ Build: 42962 Cmdline: (顯示的參數很多,就不一一列舉了) IP:192.168.100.3 Loading Kernel:... Booting... @ .:/opt/arpl# 前3秒左右還能輸入文字,此時Ping IP也會顯示連接,但過了3秒Ping就顯示斷開,屏幕可以不再輸入任何文本.... —直接回复此電子郵件,在 GitHub 上查看它,或取消訂閱。您收到此郵件是因為您發表了評論。消息 ID:@.***>
0000:00:00.0 Class 0600: Device 8086:4650 (rev 05) 0000:00:01.0 Class 0604: Device 8086:460d (rev 05) 0000:00:02.0 Class 0300: Device 8086:4690 (rev 0c) 0000:00:14.0 Class 0c03: Device 8086:7ae0 (rev 11) 0000:00:14.2 Class 0500: Device 8086:7aa7 (rev 11) 0000:00:15.0 Class 0c80: Device 8086:7acc (rev 11) 0000:00:15.1 Class 0c80: Device 8086:7acd (rev 11) 0000:00:15.2 Class 0c80: Device 8086:7ace (rev 11) 0000:00:15.3 Class 0c80: Device 8086:7acf (rev 11) 0000:00:16.0 Class 0780: Device 8086:7ae8 (rev 11) 0000:00:17.0 Class 0106: Device 8086:7ae2 (rev 11) 0000:00:19.0 Class 0c80: Device 8086:7afc (rev 11) 0000:00:19.1 Class 0c80: Device 8086:7afd (rev 11) 0000:00:1c.0 Class 0604: Device 8086:7ab8 (rev 11) 0000:00:1f.0 Class 0601: Device 8086:7a84 (rev 11) 0000:00:1f.3 Class 0403: Device 8086:7ad0 (rev 11) 0000:00:1f.4 Class 0c05: Device 8086:7aa3 (rev 11) 0000:00:1f.5 Class 0c80: Device 8086:7aa4 (rev 11) 0000:01:00.0 Class 0200: Device 15b3:1003 0000:02:00.0 Class 0200: Device 8086:15f3 (rev 03) 0001:09:00.0 Class 0106: Device 1b4b:9235 (rev 11) 0001:0c:00.0 Class 0106: Device 1b4b:9235 (rev 11)
您的 Networkchip 是?Am 11.04.2023 um 14:22 schrieb minimoonleaf @.**>: 我嘗試刪除 addon:console 並構建和引導...在顯示中歡迎使用 Automated Redpill Loader v1.1-beta2a Model:DS3622xs+ Build: 42962 Cmdline: (顯示的參數很多,就不一一列舉了) IP:192.168.100.3 Loading Kernel:... Booting... @ _._:/opt/arpl# 前3秒左右還能輸入文字,此時Ping IP也會顯示連接,但過了3秒Ping就顯示斷開,屏幕可以不再輸入任何文本.... —直接回复此電子郵件,在 GitHub 上查看它,或取消訂閱。您收到此郵件是因為您發表了評論。消息 ID:@**.***>
0000:00:00.0 Class 0600: Device 8086:4650 (rev 05) 0000:00:01.0 Class 0604: Device 8086:460d (rev 05) 0000:00:02.0 Class 0300: Device 8086:4690 (rev 0c) 0000:00:14.0 Class 0c03: Device 8086:7ae0 (rev 11) 0000:00:14.2 Class 0500: Device 8086:7aa7 (rev 11) 0000:00:15.0 Class 0c80: Device 8086:7acc (rev 11) 0000:00:15.1 Class 0c80: Device 8086:7acd (rev 11) 0000:00:15.2 Class 0c80: Device 8086:7ace (rev 11) 0000:00:15.3 Class 0c80: Device 8086:7acf (rev 11) 0000:00:16.0 Class 0780: Device 8086:7ae8 (rev 11) 0000:00:17.0 Class 0106: Device 8086:7ae2 (rev 11) 0000:00:19.0 Class 0c80: Device 8086:7afc (rev 11) 0000:00:19.1 Class 0c80: Device 8086:7afd (rev 11) 0000:00:1c.0 Class 0604: Device 8086:7ab8 (rev 11) 0000:00:1f.0 Class 0601: Device 8086:7a84 (rev 11) 0000:00:1f.3 Class 0403: Device 8086:7ad0 (rev 11) 0000:00:1f.4 Class 0c05: Device 8086:7aa3 (rev 11) 0000:00:1f.5 Class 0c80: Device 8086:7aa4 (rev 11) 0000:01:00.0 Class 0200: Device 15b3:1003 0000:02:00.0 Class 0200: Device 8086:15f3 (rev 03) 0001:09:00.0 Class 0106: Device 1b4b:9235 (rev 11) 0001:0c:00.0 Class 0106: Device 1b4b:9235 (rev 11)
Onboard 2.5G 0000:02:00.0 Class 0200: Device 8086:15f3 (rev 03) I225-v
When Loading DSM Kernel...Booting... is displayed, the IP can be ping for the first three seconds, and then the Ping will show disconnection and can no longer be connected.
But when I unplug all the hard disks, when Loading DSM Kernel...Booting... appears, I can ping for the first three seconds until there is a connection, and then it will be disconnected for 30 seconds to a few minutes, and then I can find it when I ping connection is back
Redpill Loader version: v1.1-beta2a
My device: CPU:Intel 12500 MB: Gigabyte Z690M AORUS ELITE DDR4 DIMM:ADATA 8G ECC-DIMM 4 HDD: Seagate 2.5 inch 500GB 3 (ST9500420AS)
If you need environment debugging, please contact me, or please tell me what files can be provided to you to confirm the problem.
Thanks.