Hello everyone, the problem is the following:
Was purchased from china not original joystick DS4 v2 CUH-ZCT1E
Specifically for communication with the ARDUINO and BT v4.0 ORICO adapter to it.
-BT adaptor correctly detected on the PC and the drivers installed automatically.
-DS4 v2 through USB works correctly on a PC.
-DS4 v2 through BT calmly connected to the PC; all the basic functions of the buttons work fine, but in WIN 10 spontaneous commands from the joystick are only visible in the start menu and the new interface of wines 10; it works correctly in games.
-On the phone, the android also connected via BT without problems, spontaneous button presses are not observed.
-When connected to the arduino PS4BT, a good connection via BT has never been established, the blue color always blinks. all the time asks to connect the controller to the arduino.
-When connected through a USB cable, everything works fine; all the functions from the example work, both touchpad and vibration.
I suffered for a long time I could not understand what the problem was, tried different BT adapters, sinned on them. As a result, I found an original joystick SONY DS4 for the test, I did the same and it all worked right away. Unfortunately it needs to be returned!
How can I solve the problem with my joystick when connecting it via BT?
ABRUPTLY
commented
5 years ago
Hello everyone, the problem is the following: Was purchased from china not original joystick DS4 v2 CUH-ZCT1E Specifically for communication with the ARDUINO and BT v4.0 ORICO adapter to it. -BT adaptor correctly detected on the PC and the drivers installed automatically. -DS4 v2 through USB works correctly on a PC. -DS4 v2 through BT calmly connected to the PC; all the basic functions of the buttons work fine, but in WIN 10 spontaneous commands from the joystick are only visible in the start menu and the new interface of wines 10; it works correctly in games. -On the phone, the android also connected via BT without problems, spontaneous button presses are not observed. -When connected to the arduino PS4BT, a good connection via BT has never been established, the blue color always blinks. all the time asks to connect the controller to the arduino. -When connected through a USB cable, everything works fine; all the functions from the example work, both touchpad and vibration. I suffered for a long time I could not understand what the problem was, tried different BT adapters, sinned on them. As a result, I found an original joystick SONY DS4 for the test, I did the same and it all worked right away. Unfortunately it needs to be returned! How can I solve the problem with my joystick when connecting it via BT?