search

fengguoFUAS / OpenFAST3.0_LidSim

OpenFAST 3.0 version from NREL, the SWE lidar simulation module is additionally added
Apache License 2.0
1 stars 4 forks source link

Lidar simulator for FAST.FARM #4

Open yisehakabreham opened 1 year ago

yisehakabreham commented 1 year ago

Hello @fengguoFUAS

The current release of LidSim is only capable of scanning turbulent wind evolution for a single wind turbine (OpenFAST).

But FAST.FARM reads a global inflow by ignoring the parameters in the individual turbine InflowWind module. From your recent paper, https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9867301, I understand that you used FAST.FARM for scanning the wind turbine wake using Lidar Sim.

Is it possible to access the modified version of FAST.FARM that integrates LidSim? I want to apply the LAC module on a wind farm scale.

Thank you, Yisehak A.

fengguoFUAS commented 1 year ago

Hi Yisehak A.

Thanks for connecting. Actually, I only used the wake deficit from FAST.FARM in the paper you mentioned. I then developed a DWM code in matlab and a simple lidarsim module in Matlab (only considering Line-of-sight measurement and probe volume, assuming no blade blockage and no nacelle motion).

I recently heard from NREL that they are trying to implement Lidarsim in FAST.farm. But I have no idea when it will be ready.

I will finish my university contract soon and cannot continue updating the lidar simulation module in the near future. So, I am regretful that I could not help you with the lidar simulation in FAST.farm.

BR Feng

yisehakabreham @.***> 于2023年1月30日周一 10:10写道：

Hello @fengguoFUAS https://github.com/fengguoFUAS

The current release of LidSim is only capable of scanning turbulent wind evolution for a single wind turbine (OpenFAST).

But FAST.FARM reads a global inflow by ignoring the parameters in the individual turbine InflowWind module. From your recent paper, https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9867301, I understand that you used FAST.FARM for scanning the wind turbine wake using Lidar Sim.

Is it possible to access the modified version of FAST.FARM that integrates LidSim? I want to apply the LAC module on a wind farm scale.

Thank you, Yisehak A.

— Reply to this email directly, view it on GitHub https://github.com/fengguoFUAS/OpenFAST3.0_LidSim/issues/4, or unsubscribe https://github.com/notifications/unsubscribe-auth/AO5GN5UXSLJMOAKSVTTFBADWU6AP5ANCNFSM6AAAAAAUK4JWIU . You are receiving this because you were mentioned.Message ID: @.***>

yisehakabreham commented 1 year ago

@fengguoFUAS

Thank you for providing the information. And good luck in your future endeavor.

Kindly, Yisehak A.