MRCPRecog error on DTMF key press

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Run MRCPRecog using i=any
2. Press a dtmf key

What version of the product are you using? On what operating system?
UniMRCP Modules for Asterisk 1.1.0
Asterisk 10.7.0

Below is output using builtin:dtmf/number , but the problem is with any grammar 
and also with and without telephone-event set in codecs. Also with any value of 
b

The error is produced as soon as a dtmf key is pressed, giving ERROR[5338] 
app_mrcprecog.c: (ASR-45) Recognition terminated prematurely

[Apr 14 11:05:12] NOTICE[5338] app_mrcprecog.c: MRCPRecog() grammar: 
builtin:dtmf/number
[Apr 14 11:05:12] NOTICE[5338] app_mrcprecog.c: MRCPRecog() options: 
i=any,t=5000&f=beep&b=1
[Apr 14 11:05:12] NOTICE[5338] app_unimrcp.c: Create MRCP Handle 0xe146a88 
[telisma-mrcp2]
[Apr 14 11:05:12] NOTICE[3414] app_unimrcp.c: Add Control Channel ASR-45 
<new@speechrecog>
[Apr 14 11:05:12] NOTICE[3418] app_unimrcp.c: SIP Call State ASR-45 [calling]
[Apr 14 11:05:12] NOTICE[3418] app_unimrcp.c: SIP Call State ASR-45 [ready]
[Apr 14 11:05:12] NOTICE[3415] app_unimrcp.c: Established TCP/MRCPv2 Connection 
127.0.0.1:40821 <-> 127.0.0.1:1544
[Apr 14 11:05:12] NOTICE[3414] app_mrcprecog.c: (ASR-45) Channel ready 
codec=PCMU, sample rate=8000
[Apr 14 11:05:12] WARNING[5338] format_pcm.c: offset too large 3406, truncating 
to 3405
[Apr 14 11:05:12] NOTICE[5338] app_mrcprecog.c: Stream file on 
SIP/jase-00000012 length:3405
[Apr 14 11:05:12] NOTICE[5338] app_mrcprecog.c: (ASR-45) Recognizing, enable 
DTMFs: 1, start input timers: 0
[Apr 14 11:05:13] ERROR[5338] app_mrcprecog.c: (ASR-45) Recognition terminated 
prematurely
[Apr 14 11:05:13] WARNING[5338] app_mrcprecog.c: (ASR-45) Unable to retrieve 
result
[Apr 14 11:05:13] NOTICE[3418] app_unimrcp.c: SIP Call State ASR-45 [terminated]
[Apr 14 11:05:13] NOTICE[3414] app_unimrcp.c: Destroy TCP/MRCPv2 Connection 
127.0.0.1:40821 <-> 127.0.0.1:1544
[Apr 14 11:05:13] NOTICE[3414] app_unimrcp.c: Destroy MRCP Handle ASR-45
[Apr 14 11:05:13] NOTICE[5338] app_mrcprecog.c: MRCPRecog() exiting status: 
ERROR on SIP/jase-00000012

Original issue reported on code.google.com by jase3...@gmail.com on 14 Apr 2014 at 12:45

[GoogleCodeExporter]

Support for the option i=any seems to be broken. However, everything should 
work normally in case DTMFs are transparently sent to the server to be matched 
against active grammars. This is the default and recommended way. So, if your 
server supports either in-band or out-of-band DTMFs, then just omit the option 
i.

Original comment by achalo...@gmail.com on 23 Apr 2014 at 5:39

• Changed state: Accepted
• Added labels: Component-Asterisk, OpSys-Linux, Priority-Medium, Type-Defect

[GoogleCodeExporter]

Should be fixed in r2304.

Original comment by achalo...@gmail.com on 20 Jun 2015 at 2:03

• Changed state: Fixed