search

fesch / CanZE

Take a closer look at your ZE car
http://canze.fisch.lu
Other
120 stars 70 forks source link

SOH on battery page #793

Closed stevegorst closed 7 months ago

stevegorst commented 7 months ago

The SOH is not displayed on the battery page and the debug message says NAN. Using the iPhone version of the app on a R110 42kwh battery. IMG_0073 IMG_0065

ik2wxx commented 7 months ago

Hello, what OBD dongle are you using? Looks like some other data can't be received correctly....

stevegorst commented 7 months ago

Hi Roberto

Its this one

Vgate iCar Pro BLE 4.0 OBD2 Diagnostic Tool Fault Code Reader OBDII Compatible Car Adapter Check Engine Light for iOS, Android and Windows (New)

One of the guys on the Zoe forum recommended it so I hope it's the right one.

Steve

On Mon, 9 Oct 2023 at 09:31, Roberto Sonzogni @.***> wrote:

Hello, what OBD dongle are you using? Looks like some other data can't be received correctly....

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>

ik2wxx commented 7 months ago

Hello Yes it's the model I have (two, one orange and one dark transparent). Got them in 2021 and 2022. They are running with CanZE (on a ZE50 Zoe) with no problems. I can't be sure that current model is equal to 2021 and 2022 model. BTW, was the car fully on? That is required for some systems to reply correctly. Also, sometimes disconnecting the dongle and reconnecting, will solve connection problems with car. Please try and report.

stevegorst commented 7 months ago

The car is a 2018 model. Yep it’s fully on and I’ve tried plugging in and disconnecting. I’ve also tried using Zoe 40/50 as the car but that doesn't work at all. I do get a SOH health on the charging screen but not on the battery screen. It’s lower than I expected at 86% so I’m curious about it being correct.

Steve

On Mon, 9 Oct 2023 at 17:51, Roberto Sonzogni @.***> wrote:

Hello Yes it's the model I have (two, one orange and one dark transparent). Got them in 2021 and 2022. They are running with CanZE (on a ZE50 Zoe) with no problems. I can't be sure that current model is equal to 2021 and 2022 model. BTW, was the car fully on? That is required for some systems to reply correctly. Also, sometimes disconnecting the dongle and reconnecting, will solve connection problems with car. Please try and report.

— Reply to this email directly, view it on GitHub https://github.com/fesch/CanZE/issues/793#issuecomment-1753347841, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARFO4QP5CZWT2JOGUQ5BAGLX6QTPRAVCNFSM6AAAAAA5X3UH36VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONJTGM2DOOBUGE . You are receiving this because you authored the thread.Message ID: @.***>

asdfasdfasdfasdfasasdf commented 7 months ago

I just got my OBD dongle and just installed CanZE.

Car: Zoe R240 from 2015. OBD dongle: Vgate iCar Pro BLE 4.0 CanZE: 1.0.1(19) Phone: iPhone SE 2020 IOS: 16.5.1

I can't see the SOH value either.

As an unimportant side note: It would be nice if you added a small amount of margin to the "Battery" page. All other pages have a small margin.

As another unimportant side note: The text on the "Battery" page that says "More detailed information about these data can be found in the Q & A section of the CanZE homepage" should be removed or revised. I have looked there but I can't find any such information.

IMG_7370

ik2wxx commented 7 months ago

The car is a 2018 model. Yep it’s fully on and I’ve tried plugging in and disconnecting. I’ve also tried using Zoe 40/50 as the car but that doesn't work at all. I do get a SOH health on the charging screen but not on the battery screen. It’s lower than I expected at 86% so I’m curious about it being correct. Steve

I don't have a solution right now, can't understand why it's not working. Maybe it's a different OBD firmware...can you try a different dongle?

ik2wxx commented 7 months ago

I just got my OBD dongle and just installed CanZE.

Car: Zoe R240 from 2015. OBD dongle: Vgate iCar Pro BLE 4.0 CanZE: 1.0.1(19) Phone: iPhone SE 2020 IOS: 16.5.1

I can't see the SOH value either.

Same problem with same car and same OBD (and same app :-) )

As an unimportant side note: It would be nice if you added a small amount of margin to the "Battery" page. All other pages have a small margin.

Thank you for suggestion, will do.

As another unimportant side note: The text on the "Battery" page that says "More detailed information about these data can be found in the Q & A section of the CanZE homepage" should be removed or revised. I have looked there but I can't find any such information.

Ops, you're right. @yoh-there where have those informations gone?