search

fesch / CanZE4iOS

CanZE 4 iOS
9 stars 5 forks source link

Test o.k. but no further results #2

Open coolio2004 opened 3 years ago

coolio2004 commented 3 years ago

Connection o.k. Test: VIN o.k.; soc o.k. But no values on buttons - only timeout.

ik2wxx commented 3 years ago

Hello, what OBD adapter are you using ? Connection BLE of Wifi ? Also please check app version in settings screen, should be 1.0(4) Thank you

coolio2004 commented 3 years ago

Hi, i use vgate icar pro ble- works fine with android. best regards Hans

Von meinem iPad Pro gesendet

Am 15.02.2021 um 16:08 schrieb Roberto Sonzogni notifications@github.com:

 Hello, what OBD adapter are you using ? Connection BLE of Wifi ? Thank you

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

coolio2004 commented 3 years ago

With 1.0(4) no connection👎

ik2wxx commented 3 years ago

Thank you for reporting, will investigate more on VGate connection.

coolio2004 commented 3 years ago

Hallo Roberto, Today I got some results with 1.0(4) -strange. When loading data app crashes after receiving some data.

Von meinem iPad Pro gesendet

Am 15.02.2021 um 16:50 schrieb Roberto Sonzogni notifications@github.com:

 Thank you for reporting, will investigate more on VGate connection.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

ik2wxx commented 3 years ago

Hello Maybe yesterday the dongle was not working correctly, in that case disconnect it from obd port and then reconnect. Will check the crash report Tnx

coolio2004 commented 3 years ago

Perhaps open and close the door do the same - this it what i did.

Von meinem iPad Pro gesendet

Am 16.02.2021 um 12:26 schrieb Roberto Sonzogni notifications@github.com:

 Hello Maybe yesterday the dongle was not working correctly, in that case disconnect it from obd port and then reconnect. Will check the crash report Tnx

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

coolio2004 commented 3 years ago

hi Roberto, here some further investigations:

Von meinem iPad Pro gesendet

Am 16.02.2021 um 12:26 schrieb Roberto Sonzogni notifications@github.com:

 Hello Maybe yesterday the dongle was not working correctly, in that case disconnect it from obd port and then reconnect. Will check the crash report Tnx

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

coolio2004 commented 3 years ago

Hi Roberto, on my jailbroken Ipad i found the csv. Perhaps this can help you. Hans

2021-02-16 19:00:35 +0000 ECU, Version Type, Version data ABS-VDC,diagVersion: ABS-VDC,diagVersion: ABS-VDC,diagVersion: ABS-VDC,diagVersion: ABS-VDC,diagVersion: ABS-VDC,diagVersion: ABS-VDC,supplier: ABS-VDC,soft: ABS-VDC,version: AIRBAG-SRS,diagVersion: AIRBAG-SRS,supplier: AIRBAG-SRS,soft: AIRBAG-SRS,version: AIRBAG-SRS,diagVersion: AIRBAG-SRS,supplier: AIRBAG-SRS,soft: AIRBAG-SRS,version: AIRBAG-SRS,diagVersion: AIRBAG-SRS,supplier: AIRBAG-SRS,soft: AIRBAG-SRS,version: AIRBAG-SRS,diagVersion: AIRBAG-SRS,supplier: AIRBAG-SRS,soft: AIRBAG-SRS,version: AIRBAG-SRS,diagVersion: AIRBAG-SRS,supplier: AIRBAG-SRS,soft: AIRBAG-SRS,version: AIRBAG-SRS,diagVersion: AIRBAG-SRS,supplier: AIRBAG-SRS,soft: AIRBAG-SRS,version: AAU,diagVersion: AAU,diagVersion: AAU,diagVersion: AAU,diagVersion: AAU,diagVersion: AAU,diagVersion: AAU,supplier: AAU,soft: AAU,version: APB,diagVersion: APB,diagVersion: APB,diagVersion: APB,diagVersion: APB,diagVersion: APB,diagVersion::A0 APB,supplier:ñŠTRW! Carl"-Spaete#r-Str. $8 560%70 Kobl&enz G'ermany ( APB,soft:ñ”S01!_02 " # $ APB,version:ñ•001!000E0C"04S102 # $ BCB-OBC,diagVersion: BCB-OBC,supplier: BCB-OBC,soft: BCB-OBC,version: BCB-OBC,diagVersion: BCB-OBC,supplier: BCB-OBC,soft: BCB-OBC,version: BCB-OBC,diagVersion: BCB-OBC,supplier: BCB-OBC,soft: BCB-OBC,version: BCB-OBC,diagVersion: BCB-OBC,supplier: BCB-OBC,soft: BCB-OBC,version: BCB-OBC,diagVersion: BCB-OBC,supplier: BCB-OBC,soft: BCB-OBC,version: BCB-OBC,diagVersion::36 BCB-OBC,supplier:!R BCB-OBC,soft::2231 BCB-OBC,version::3952 UCH,diagVersion: UCH,diagVersion: UCH,diagVersion: UCH,diagVersion: UCH,diagVersion: UCH,diagVersion::A0 UCH,supplier:ñŠCON!TINENTA"L AUTOM# UCH,soft:ñ”142!902 " # $ UCH,version:ñ•080!0 " # $ HVAC,diagVersion: HVAC,diagVersion: HVAC,diagVersion: HVAC,diagVersion: HVAC,diagVersion: HVAC,diagVersion: HVAC,supplier: HVAC,soft: HVAC,version: DCM,diagVersion: DCM,diagVersion: DCM,diagVersion: DCM,diagVersion: DCM,diagVersion: DCM,diagVersion::78 DCM,supplier:ñŠCon!tinenta"l # $ % & ' ( DCM,soft:ñ”SW9! " # $ DCM,version:ñ• ! " # $ E-ACT-EBA,diagVersion: E-ACT-EBA,diagVersion: E-ACT-EBA,diagVersion: E-ACT-EBA,diagVersion: E-ACT-EBA,diagVersion: E-ACT-EBA,diagVersion: E-ACT-EBA,supplier: E-ACT-EBA,soft: E-ACT-EBA,version: EPS,diagVersion: EPS,diagVersion: EPS,diagVersion: EPS,diagVersion: EPS,diagVersion: EPS,diagVersion: EPS,supplier: EPS,soft: EPS,version: FCAM,diagVersion: FCAM,diagVersion: FCAM,diagVersion: FCAM,diagVersion: FCAM,diagVersion: FCAM,diagVersion: FCAM,supplier: FCAM,soft: FCAM,version: HFM,diagVersion: HFM,diagVersion: HFM,diagVersion: HFM,diagVersion: HFM,diagVersion: HFM,diagVersion::A0 HFM,supplier:ñŠCON!TINEN HFM,soft:ñ”142!A02 " # $ HFM,version:ñ•063!0 " # $ IDM,diagVersion: IDM,diagVersion: IDM,diagVersion: IDM,diagVersion: IDM,diagVersion: IDM,diagVersion: IDM,supplier: IDM,soft: IDM,version: INV-ME,diagVersion: INV-ME,supplier: INV-ME,soft: INV-ME,version: INV-ME,diagVersion: INV-ME,supplier: INV-ME,soft: INV-ME,version: INV-ME,diagVersion: INV-ME,supplier: INV-ME,soft: INV-ME,version: INV-ME,diagVersion: INV-ME,supplier: INV-ME,soft: INV-ME,version: INV-ME,diagVersion: INV-ME,supplier: INV-ME,soft: INV-ME,version: INV-ME,diagVersion: INV-ME,supplier: INV-ME,soft: INV-ME,version: FRRAD,diagVersion: FRRAD,diagVersion: FRRAD,diagVersion: FRRAD,diagVersion: FRRAD,diagVersion: FRRAD,diagVersion: FRRAD,supplier: FRRAD,soft: FRRAD,version: LBC,diagVersion: LBC,diagVersion: LBC,diagVersion: LBC,diagVersion: LBC,diagVersion: LBC,diagVersion::A0 LBC,supplier:ñŠe2c!ad " # $ % & ' ( LBC,soft:” 54 LBC,version:•ZL0 LBC2,diagVersion: LBC2,diagVersion: LBC2,diagVersion: LBC2,diagVersion: LBC2,diagVersion: LBC2,diagVersion::A0 LBC2,supplier:ñŠE2C!AD " # $ % & ' ( LBC2,soft:” 53 LBC2,version:•ZL0 TDB,diagVersion: TDB,diagVersion: TDB,diagVersion: TDB,diagVersion: TDB,diagVersion: TDB,diagVersion::A0 TDB,supplier:ñŠ10V!isteonP"almela-#-EV $ % & ' ( TDB,soft:ñ”EV!V06 TDB,version:•193 MIU,diagVersion: MIU,diagVersion: MIU,diagVersion: MIU,diagVersion: MIU,diagVersion: MIU,diagVersion::A0 MIU,supplier: MIU,soft: MIU,version:ñ•SW0!7 Navigation-UCC-ITM,diagVersion: Navigation-UCC-ITM,diagVersion: Navigation-UCC-ITM,diagVersion: Navigation-UCC-ITM,diagVersion: Navigation-UCC-ITM,diagVersion: Navigation-UCC-ITM,diagVersion::78 Navigation-UCC-ITM,supplier: Navigation-UCC-ITM,soft: Navigation-UCC-ITM,version: Parking-Sonar,diagVersion: Parking-Sonar,diagVersion: Parking-Sonar,diagVersion: Parking-Sonar,diagVersion: Parking-Sonar,diagVersion: Parking-Sonar,diagVersion: Parking-Sonar,supplier: Parking-Sonar,soft: Parking-Sonar,version: PLC-PLGW,diagVersion: PLC-PLGW,diagVersion: PLC-PLGW,diagVersion: PLC-PLGW,diagVersion: PLC-PLGW,diagVersion: PLC-PLGW,diagVersion::A0 PLC-PLGW,supplier:ñŠCON!TINENTA"LENGIN#EERING$SERVICE%S & ' ( PLC-PLGW,soft:ñ”283!G860 PLC-PLGW,version:ñ•REX!100u0"430 S-GW3,diagVersion::A0 S-GW3,supplier:ŠB40 S-GW3,soft:ñ”F00!5VT1779" # $ S-GW3,version:ñ•SW0!006.000"3.0002 # $ USM,diagVersion: USM,supplier: USM,soft: USM,version: USM,diagVersion: USM,supplier: USM,soft: USM,version: USM,diagVersion: USM,supplier: USM,soft: USM,version: USM,diagVersion: USM,supplier: USM,soft: USM,version: USM,diagVersion: USM,supplier: USM,soft: USM,version: USM,diagVersion::37 USM,supplier:!R@ USM,soft::2239 USM,version::3952 EVC-HCM-VCM,diagVersion: EVC-HCM-VCM,diagVersion: EVC-HCM-VCM,diagVersion: EVC-HCM-VCM,diagVersion: EVC-HCM-VCM,diagVersion: EVC-HCM-VCM,diagVersion::A0 EVC-HCM-VCM,supplier:ñŠCON!TINENTA"L_ENGIN#E_S EVC-HCM-VCM,soft:ñ”0A EVC-HCM-VCM,version:ñ•69 VSP,diagVersion: VSP,supplier: VSP,soft: VSP,version: VSP,diagVersion: VSP,supplier: VSP,soft: VSP,version: VSP,diagVersion: VSP,supplier: VSP,soft: VSP,version: VSP,diagVersion: VSP,supplier: VSP,soft: VSP,version: VSP,diagVersion: VSP,supplier: VSP,soft: VSP,version: VSP,diagVersion: VSP,supplier: VSP,soft: VSP,version: WCGS,diagVersion: WCGS,diagVersion: WCGS,diagVersion: WCGS,diagVersion: WCGS,diagVersion: WCGS,diagVersion: WCGS,supplier: WCGS,

coolio2004 commented 3 years ago

o.k. in the file app of IOS you will find the files as well.

ik2wxx commented 3 years ago

o.k. in the file app of IOS you will find the files as well.

Yes, the Files app is the right place to go. I know something wrong with firmware, but not with all OBD, need to check what's wrong. Thank you for all reports and compliments !

ramabecker commented 3 years ago

First of all, many thanks for your work, Roberto! I use the APP with the Vgate iCar Pro BLE 4.0 dongle and the connection worked smoothly. I also can confirm what coolio2004 wrote. In adition, I noticed that the "HV Akku" button lacks the label of the lower two diagramms (Spannung and Temperatur). I'll continue to test the many functions and get back to you if necessary. Good luck and thanks you again for your great work.

ik2wxx commented 3 years ago

In adition, I noticed that the "HV Akku" button lacks the label of the lower two diagramms (Spannung and Temperatur).

Thank you for reporting ! This week I will publish a new update with many improvements.

ramabecker commented 3 years ago

Thank you Roberto for the great update. The V1.0 (5) has become significantly faster and more stable. So far I have noticed four points that can still be improved. 1. When the "LADE-INFO" button is pressed on the 2nd page, the app stops.

  1. With the button "FAHRT-INFOS" on the 1st page the daily kilometers are not correct (for me 286,331.2 km are displayed with real 7752 km).
  2. With the "REICHWEITE" button on the 2nd page, the km displays for "Restreichweite nach OBD2" and "Restreichweite nach CanZE" are also incorrect.
  3. With the "KLIMATISIERUNG" button on the 1st page, the text in the 1st line is too long so that no value can be displayed next to it (Lüfter-Geschwindigkeit der Antriebseinheit (...)). As far as the points that struck me. But the app is really fun. 😊👍
coolio2004 commented 3 years ago

Thanx so lot Roberto for the update. Same bugs as rambecker reported on Iphone XR with IOS 14.5 beta 3.

coolio2004 commented 3 years ago

Übersicht Zellenspannung -no values and than it crashs.

ramabecker commented 3 years ago

"Übersicht Zellspannung" is okay with me. Works much faster than V1.0(4). Also with iPhone XS 14.4.

ik2wxx commented 3 years ago

Thank you for all suggestions and report. I've discovered problems with missing translations in german and french, that may lead to app crashes, those will be fixed soon.

coolio2004 commented 3 years ago

Hi Roberto, if I can help you with german translation - please let it me know. Best regards Hans

Von meinem iPad Pro gesendet

Am 08.03.2021 um 12:33 schrieb Roberto Sonzogni notifications@github.com:

 Thank you for all suggestions and report. I've discovered problems with missing translations in german and french, that may lead to app crashes, those will be fixed soon.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

ramabecker commented 3 years ago

Hello Roberto, I have another suggestion for improvement: In the various diagram displays (e.g. "LADEDIAGRAMME") you have shown the diagram curves in different colors. For an even better overview, it would make sense if the associated texts and numerical values ​​also had the same colors. Maybe this can be implemented in the next version. Best regards Ralf

ik2wxx commented 3 years ago

In the various diagram displays (e.g. "LADEDIAGRAMME") you have shown the diagram curves in different colors. For an even better overview, it would make sense if the associated texts and numerical values ​​also had the same colors.

Thank you, this will be corrected in next release.

ramabecker commented 3 years ago

Hi Roberto, I noticed something again:

  1. The "LADEVERLAUF" button has the "Type" column. The type of load is entered there (slow, quick, unknown). Today I first charged quickly (50 kWh) and a little later again slowly (20 kWh). For this purpose, "Slow" was entered in the table for the first load and "Quick" for the second load. Actually, it should have been entered the other way around in the table. Is something confused there?
  2. The "HV AKKU" button has 2 diagrams below. "Spannung der Akkuzellen" and "Temperatur der Akkuzellen". In both diagrams, the current value is only shown as a line. It would be desirable if the current value were also displayed numerically as a number. Thanks again for your efforts. Many greetings from Ralf