search

filipsPL / autowx2

The program for scheduling recordings and processing of the satellite and ground radio transmissions (like capturing of the weather APT images from NOAA satellites, voice messages from ISS, fixed time recordings of WeatherFaxes etc.) :earth_africa: :satellite:
78 stars 16 forks source link

Meteor-M2 gallery #58

Closed SA7BNT closed 5 years ago

SA7BNT commented 5 years ago

After at DL4OCH fix the latest issue with Meteor-M2 and it seems to run stabile, a gallary for Meteor-M2 like NOAA should be nice. :)

https://sa7bnt.funkerportal.de/autowx2//recordings/meteor/img/2019/01/11/

OK1SLM commented 5 years ago

You have it nice. Somehow I can not set up a beginner.

SA7BNT commented 5 years ago

You have it nice. Somehow I can not set up a beginner.

What is the problem?

OK1SLM commented 5 years ago

modules/meteor-m2/meteor.sh: řádek 50: bc: command not found 5-1816, duration: min mlrpt: option requires an argument -- 't' Usage: mlrpt -[f s t -qihv] -f: Specify SDR Receiver Frequency (in kHz). -s: Start and Stop Time in hhmm of Operation. -t: Duration in min of Operation. -q: Run in Quite mode (no messages printed). -i: Invert (flip) Images. Useful for South to North passes. -h: Print this usage information and exit. -v: Print version number and exit. mlrpt: Paused till 18:15 UTC. Operation Timer set to 60 sec mlrpt: Pause Timer Expired

st 16. 1. 2019 v 19:52 odesílatel SA7BNT notifications@github.com napsal:

You have it nice. Somehow I can not set up a beginner.

What is the problem?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/filipsPL/autowx2/issues/58#issuecomment-454896059, or mute the thread https://github.com/notifications/unsubscribe-auth/AslgiUL3jPAk0Kh2ilQpw2mGyVGFrEHKks5vD3TugaJpZM4Z8J95 .

SA7BNT commented 5 years ago

Try to install bc What system are you using?

OK1SLM commented 5 years ago

Debian 9 RPI

SA7BNT commented 5 years ago

try sudo apt-get update sudo apt-get install bc

OK1SLM commented 5 years ago

Thanks for waiting for another Meteor's flight.

SA7BNT commented 5 years ago

God luck! 73

SA7BNT

OK1SLM commented 5 years ago

/root/mlrpt/mlrptrc: No such file or directory !! mlrpt: Failed to read mlrptrc configuration file - exiting : Adresář nebo soubor neexistuje

SA7BNT commented 5 years ago

What are you doing? Why run autowx2 as root??

SA7BNT commented 5 years ago

Also a good idee, take a look into the Wiki https://github.com/filipsPL/autowx2/wiki/meteor-m2

OK1SLM commented 5 years ago

I'm sorry to really learn the march.

OK1SLM commented 5 years ago

Thank you for your patience.

filipsPL commented 5 years ago

sudo apt-get update sudo apt-get install bc

true, we have to add it to our installation script.

BTW: the gallery for meteor is on the way. Stay tuned!

OK1SLM commented 5 years ago

Thank you for your help.

OK1SLM commented 5 years ago

I still have one question. How do I connect Main Page to a web server running on the same device?

SA7BNT commented 5 years ago

https://github.com/filipsPL/autowx2/blob/ae78138764d4a10b7b5f70879a57617bbcb03c9d/autowx2_conf.py.example#L125

OK1SLM commented 5 years ago

Is there a need to copy something to the new folder?

SA7BNT commented 5 years ago

No not realy. Just run https://github.com/filipsPL/autowx2/blob/master/bin/gen-static-page.sh

OK1SLM commented 5 years ago

wwwRootPath='file:///var/www/html/' I entered the path that I started the script and nothing the html folder is empty.

SA7BNT commented 5 years ago

wwwRootPath='file:///var/www/html/' try wwwRootPath='/autowx2/' and then "ip/autowx2/index.html" or ip:(webserverport)/autowx2/index.html

OK1SLM commented 5 years ago

http://www.ok1slm.cz Meteor-M2

OK1SLM commented 5 years ago

wwwRootPath='file:///var/www/html/' try wwwRootPath='/autowx2/' and then "ip/autowx2/index.html" or ip:(webserverport)/autowx2/index.html It does not work, but I still thank you for your help.

SA7BNT commented 5 years ago

Then you are doing something wrong. Sorry

OK1SLM commented 5 years ago

Where does it create a folder and should it create it?

filipsPL commented 5 years ago

An experimental support for meteor gallery. I can't test it extensively, but please report all bugs here.

screenshot_20190119_232714

Please remember to refresh/update your config file, and enable meteor logs by:

includeGalleryMeteor=1      # Meteor recordings

also, please see if modules conf files (like meteor.conf) needs to be updated/tuned for operations.

OK1SLM commented 5 years ago

meteor.sh

  1. source $scriptDir/module_record.sh to source $scriptDir/meteor_record.sh
OK1SLM commented 5 years ago

Satellite: NOAA-19 Pass Start: 2019-01-20 05:29:39 UTC .Resizing images to 1024 px MCIR-precip Satellite: NOAA-19 Status: signal processing........................... Gain: 7.7 Channel A: 3/3B (mid infrared) convert-im6.q16: invalid argument for option -resize': 1024x1024\> @ error/convert.c/ConvertImageCommand/2592. C Satellite: NOAA-19 Status: signal processing......................mal infrared) ge convert-im6.q16: invalid argument for option-resize': 1024x1024> @ error/convert.c/ConvertImageCommand/2592Satellite: NOAA-19 Status: signal processing................... Gain: 7.7 Channel A: 3/3B (mid infrared) wxtoimg: warning: convert-im6.q16: invalid argument for option `-resize': 1024x1024> @ error/convert.c/ConvertImageCommand/2592. therm Satellite: NOAA-19 ......Gain: 7.7 Channel A: 3/3B (mid infrared) t.c/ConvertImageCommand/2592. **** HVCT-precip Satellite: NOAA-19 ...........wxtoimg: warning: convert-im6.q16: invalid argument for option -resize': 1024x1024\> @ error/convert.c/ConvertImageCommand/2592. Satellite: NOAA-19 ......Gain: 7.7 Channel B: 4 (thermal infrared) . du: nelze přistoupit k '20190120-0630_NOAA-19-MCIR-precip+map.jpg': Adresář nebo soubor neexistuje : unable to open image20190120-0630_NOAA-19-MCIR-precip+map.jpg': Adresář nebo soubor neexistuje @ error/blob.c/OpenBlob/2701. convert-im6.q16: no such image GRANITE' @ error/mogrify.c/MogrifyImageList/8770. convert-im6.q16: no images defined20190120-0630_NOAA-19-MCIR-precip+map.th.jpg' @ error/convert.c/ConvertImageCommand/3258. du: nelze přistoupit k '20190120-0630_NOAA-19-HVC+map.jpg': Adresář nebo soubor neexistuje h image GRANITE' @ error/mogrify.c/MogrifyImageList/8770. convert-im6.q16: no images defined20190120-0630_NOAA-19-HVC+map.th.jpg' @ error/convert.c/ConvertImageCommand/3258.

convert-im6.q16: unable to open image 20190120-0630_NOAA-19-MSA+map.jpg': Adresář nebo soubor neexistuje @ error/blob.c/OpenBlob/2701convert-im6.q16: no such imageGRANITE' @ error/mogrify.c/MogrifyImageList/8770convert-im6.q16: no images defined 20190120-0630_NOAA-19-MSA+map.th.jpg' @ error/convert.c/ConvertImageCommand/3258ř nebo soubor neexistuje /8770. convert-im6.q16: no images defined20190120-0630_NOAA-19-therm+map.th.jpg' @ error/convert.c/ConvertImageCommand/3258.

convert-im6.q16: unable to open image 20190120-0630_NOAA-19-HVCT-precip+map.jpg': Adresář nebo soubor neexistuje @ error/blob.c/OpenBlob/2701convert-im6.q16: no such imageGRANITE' @ error/mogrify.c/MogrifyImageList/8770convert-im6.q16: no images defined 20190120-0630_NOAA-19-HVCT-precip+map.th.jpg' @ error/convert.c/ConvertImageCommand/3258convert-im6.q16: unable to open image20190120-0630_NOAA-19-NO+map.jpg': Adresář nebo soubor neexistuje @ error/blob.c/OpenBlob/2701. convert-im6.q16: no images defined `20190120-0630_NOAA-19-NO+map.th.jpg' @ error/convert.c/ConvertImageCommand/3258/home/pi/autowx2/

filipsPL commented 5 years ago

Yes, if you have problems, please comment out in noaa.conf the line to:

# resizeimageto=1024
OK1SLM commented 5 years ago

OK Thx

OK1SLM commented 5 years ago

meteor.conf rawImageDir="/home/pi/mlrpt/images/"

mlrptrc /home/pi/mlrpt/images/

/var/lrpt/images/

Is this setting correct?

OK1SLM commented 5 years ago

2019-01-20

Files have different times. Is UTC time?

sed: /home/pi/mlrpt/images//20190120-0935_METEOR-M2.log nelze číst: Adresář nebo soubor neexistuje 0190120-0935_METEOR-M2.log nelze číst: Adresář nebo soubor neexistuje sed: /home/pi/mlrpt/images//20190120-0935_METEOR-M2.log nelze číst: Adresář nebo soubor neexistuje 120-0935_METEOR-M2.log nelze číst: Adresář nebo soubor neexistuje 0935_METEOR-M2.log nelze číst: Adresář nebo soubor neexistuje sed: /home/pi/mlrpt/images//20190120-0935_METEOR-M2.log nelze číst: Adresář nebo soubor neexistuje date: date: chybné datum: „@“

OK1SLM commented 5 years ago

Please do I set this up correctly? I do not understand programming very much, and mainly translations are solved by Google translator.