search

filipsPL / autowx2

The program for scheduling recordings and processing of the satellite and ground radio transmissions (like capturing of the weather APT images from NOAA satellites, voice messages from ISS, fixed time recordings of WeatherFaxes etc.) :earth_africa: :satellite:
78 stars 16 forks source link

recording of noaa does not work #80

Open smarti2019 opened 5 years ago

smarti2019 commented 5 years ago

I have a fresh raspian installation. The installation of autowx2 has worked so far. No error message. But there is no noaa recording.

SA7BNT commented 5 years ago

Please post your log to see where you got problems

OK1SLM commented 5 years ago

sudo wxtoimg :yes Enter

smarti2019 commented 5 years ago

sudo wxtoimg with yes entered ok, but no record from noaa. Where is the log file? Here is an abstract of the last consolen messages:

2019-04-28 10:50 2. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 1. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 Recalculating the new pass table and saving to disk. 2019-04-28 10:50 2. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 1. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 1. discard NOAA-15, keep ISS 2019-04-28 10:50 2. discard NOAA-19, keep ISS This is a miracle! 2019-04-28 10:50 Next five passes: 2019-04-28 10:50 ● NOAA-18 :: 2019-04-28 10:48 to 2019-04-28 11:03, dur: 15:15, max el. 81°; azimuth: 108° (E→) f=137912500Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 ● Radiosonde :: 2019-04-28 12:20 to 2019-04-28 14:20, dur: 120:00, max el. 0°; azimuth: 0° (N↑) f=98796500Hz; Decoding: modules/radiosonde/run_radiosondescanner.sh 2019-04-28 10:50 ● NOAA-19 :: 2019-04-28 15:11 to 2019-04-28 15:24, dur: 13:20, max el. 22°; azimuth: 44° (NNE↑↗) f=137100000Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 ● NOAA-19 :: 2019-04-28 16:50 to 2019-04-28 17:05, dur: 15:05, max el. 72°; azimuth: 66° (NE↗) f=137100000Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 ● NOAA-19 :: 2019-04-28 18:31 to 2019-04-28 18:46, dur: 14:14, max el. 28°; azimuth: 267° (WSW←↙) f=137100000Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 Next pass: 2019-04-28 10:50 ● NOAA-18 :: 2019-04-28 10:48 to 2019-04-28 11:03, dur: 15:15, max el. 81°; azimuth: 108° (E→) f=137912500Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 Killing all remaining rtl* processes... 2019-04-28 10:50 !! Recording ● NOAA-18 :: 2019-04-28 10:48 to 2019-04-28 11:03, dur: 15:15, max el. 81°; azimuth: 108° (E→) f=137912500Hz; Decoding: modules/noaa/noaa.sh /home/pi/autowx2/ HOME fileNameCore=20190428-1048_NOAA-18 satellite=NOAA-18 start=1556441288 duration=744 peak=81 azimuth=108 freq=137912500 sample= wavrate= dongleIndex= enchancements=

But i find no files, no wav, no raw, no jpeg, rtl_433 works during the breaks

SA7BNT commented 5 years ago

You can try to run the test. https://github.com/filipsPL/autowx2/blob/72804c588a1d793e2b5f76471a67e55d0d7201ab/modules/noaa/noaa.sh#L46 Remove the # and run ./noaa.sh tests/20180118-1504_NOAA-19.wav tests/20180118-1504_NOAA-19 NOAA-19 1516284265 926 from the commandline. See what will happend.

smarti2019 commented 5 years ago

at the console repeated and repeated:

HOME fatal: Keine Namen gefunden, kann nichts beschreiben. fileNameCore=tests/20180118-1504_NOAA-19.wav satellite=tests/20180118-1504_NOAA-19 start=NOAA-19 duration=1516284265 peak=926 azimuth= freq= sample=48000 wavrate=11025 dongleIndex=0 enchancements=MCIR-precip /home/pi/autowx2/ HOME fatal: Keine Namen gefunden, kann nichts beschreiben. fileNameCore=tests/20180118-1504_NOAA-19.wav satellite=tests/20180118-1504_NOAA-19 start=NOAA-19 duration=1516284265 peak=926 azimuth= freq= sample=48000 wavrate=11025 dongleIndex=0 enchancements=MCIR-precip /home/pi/autowx2/

SA7BNT commented 5 years ago

Strange!! Maybe @filipsPL have some idee.

smarti2019 commented 5 years ago

I'm sure you can adjust that too. Just a fresh raspberry pi with rtl-sdr v3 dongel and current raspian. pulled autowx2 from the github and then run install.sh. the problem is reproducible

SA7BNT commented 5 years ago

sudo wxtoimg with yes entered ok, but no record from noaa. Where is the log file? Here is an abstract of the last consolen messages:

2019-04-28 10:50 2. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 1. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 Recalculating the new pass table and saving to disk. 2019-04-28 10:50 2. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 1. discard NOAA-18, keep Radiosonde 2019-04-28 10:50 1. discard NOAA-15, keep ISS 2019-04-28 10:50 2. discard NOAA-19, keep ISS This is a miracle! 2019-04-28 10:50 Next five passes: 2019-04-28 10:50 ● NOAA-18 :: 2019-04-28 10:48 to 2019-04-28 11:03, dur: 15:15, max el. 81°; azimuth: 108° (E→) f=137912500Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 ● Radiosonde :: 2019-04-28 12:20 to 2019-04-28 14:20, dur: 120:00, max el. 0°; azimuth: 0° (N↑) f=98796500Hz; Decoding: modules/radiosonde/run_radiosondescanner.sh 2019-04-28 10:50 ● NOAA-19 :: 2019-04-28 15:11 to 2019-04-28 15:24, dur: 13:20, max el. 22°; azimuth: 44° (NNE↑↗) f=137100000Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 ● NOAA-19 :: 2019-04-28 16:50 to 2019-04-28 17:05, dur: 15:05, max el. 72°; azimuth: 66° (NE↗) f=137100000Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 ● NOAA-19 :: 2019-04-28 18:31 to 2019-04-28 18:46, dur: 14:14, max el. 28°; azimuth: 267° (WSW←↙) f=137100000Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 Next pass: 2019-04-28 10:50 ● NOAA-18 :: 2019-04-28 10:48 to 2019-04-28 11:03, dur: 15:15, max el. 81°; azimuth: 108° (E→) f=137912500Hz; Decoding: modules/noaa/noaa.sh 2019-04-28 10:50 Killing all remaining rtl* processes... 2019-04-28 10:50 !! Recording ● NOAA-18 :: 2019-04-28 10:48 to 2019-04-28 11:03, dur: 15:15, max el. 81°; azimuth: 108° (E→) f=137912500Hz; Decoding: modules/noaa/noaa.sh /home/pi/autowx2/ HOME fileNameCore=20190428-1048_NOAA-18 satellite=NOAA-18 start=1556441288 duration=744 peak=81 azimuth=108 freq=137912500 sample= wavrate= dongleIndex= enchancements=

But i find no files, no wav, no raw, no jpeg, rtl_433 works during the breaks

Is your time (regional settings) right for your place where you are?? Just tested, and i was not running in at some issue. There was just a RTL-SDR stick connected NO ANTENNA on the stick. I just have one antenna for my running system. My running system is NOT a Raspberry Pi. It´s a Dell Optiplex I5 because of Meteor-M2 is taking a lot of CPU performance. You can see it at https://sa7bnt.funkerportal.de/autowx2/ Best Tim

Bildschirmfoto 2019-04-30 um 21 29 24

filipsPL commented 5 years ago

Do you have the rtl_fm installed and running? What if you type rtl_fm in the console?

And, if it is ok, try to listen to some fm transmission, eg: rtl_fm -f 89.1M -M fm -s 170k -A fast -r 32k -l 0 -E deemp | play -r 32k