Custom Set Points Low Button

[mdeluca1992]

When using custom set points the Off button highlights instead of the Low button.

customSetpoints: true lowPercentage: 10 medPercentage: 65 hiPercentage: 100

[finity69x2]

Thanks for catching that.

It's fixed now.

[mdeluca1992]

Thanks for looking into this. It still seems to be giving me issues. I did the HACS update. I restarted Home Assistant. If in the Off state and try selecting Low the fan turns on but the buttons still says Off. If I then select Medium the fan turns to medium but the button will not illuminate. Same with going from low to high.

If in the Off state I can go right to medium or high no problem but when going back to low the off button lights up.

On Tue, Mar 23, 2021, 6:24 PM finity69x2 @.***> wrote:

Closed #1 https://github.com/finity69x2/fan-percent-button-row/issues/1.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/finity69x2/fan-percent-button-row/issues/1#event-4498826898, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOVN3BSW75XLCLYOX2O3NVDTFEIKNANCNFSM4ZQXL77Q .

[finity69x2]

Is it only if you use custom setpoints or on both modes (custom and default)?

I tested it in both modes and it seemed to work ok on my test fan.

[mdeluca1992]

Low is actually working now but it seems to be doing this on both default and custom set points.. If the fan is off and I select any of the three speeds it goes right to it. If the fan is off and I select low first the fan switches to low. If I then select medium the button outlines but the fan does not switch. If I then select high it does switch to high. I have included a picture of this. The fan is on low but I selected medium and it did not switch.

[image: image.png]

On Wed, Mar 24, 2021 at 1:00 PM finity69x2 @.***> wrote:

Is it only if you use custom setpoints or on both modes (custom and default)?

I tested it in both modes and it seemed to work ok on my test fan.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/finity69x2/fan-percent-button-row/issues/1#issuecomment-805997036, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOVN3BQ7XISBUSIKMO7OKALTFILETANCNFSM4ZQXL77Q .

-- Matt DeLuca Cell Phone: 216-296-1315 @. @.>

[finity69x2]

are there any errors in the logs?

if you open the console in the browser (F12 in chrome) are there any errors there?

[PrathikGopal]

Low is actually working now but it seems to be doing this on both default and custom set points.. If the fan is off and I select any of the three speeds it goes right to it. If the fan is off and I select low first the fan switches to low. If I then select medium the button outlines but the fan does not switch. If I then select high it does switch to high. I have included a picture of this. The fan is on low but I selected medium and it did not switch. [image: image.png] … On Wed, Mar 24, 2021 at 1:00 PM finity69x2 @.> wrote: Is it only if you use custom setpoints or on both modes (custom and default)? I tested it in both modes and it seemed to work ok on my test fan. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOVN3BQ7XISBUSIKMO7OKALTFILETANCNFSM4ZQXL77Q . -- Matt DeLuca Cell Phone: 216-296-1315 @. @.***>

+1 to that, I have the same issue. Low and high seem to work but medium just outlines and no changes, sometimes it turns off the ifan.

[finity69x2]

@PrathikGopal

Is this related to the conversation on the forum today?

And with that resolution there is this fixed now as well?

[PrathikGopal]

This is fixed, thank you for the follow up and the hard work for our HA community🙏