3 ISSUES

[koventheboy]

I am using single RX580 4G on gigabyte-h81M-DS2 (with internal graphic card). Issue1 If i set "gpu_thread_num" : 1, then it shows you GPU config array has 2 members while you want to use one thread.

Issue2 But after I set "gpu_thread_numi to 2. It shoes cl_device_not_found when calling clgetdeviceids for number of devices

Issue3 If I set "platform_index" : 0, it will crash right after I run the program.

Really really thank you

My configure: /*

• Number of GPUs that you have in your system. Each GPU will get its own CPU thread. / "gpu_thread_num" : 2, /
• GPU configuration. You should play around with intensity and worksize as the fastest settings will vary.
• index - GPU index number usually starts from 0
• intensity - Number of parallel GPU threads (nothing to do with CPU threads)
• worksize - Number of local GPU threads (nothing to do with CPU threads)
• affine_to_cpu - This will affine the thread to a CPU. This can make a GPU miner play along nicer with a CPU miner. */ "gpu_threads_conf" : [ { "index" : 0, "intensity" : 700, "worksize" : 8, "affine_to_cpu" : false },{ "index" : 0, "intensity" : 700, "worksize" : 8, "affine_to_cpu" : false },

],

/*

• Platform index. This will be 0 unless you have different OpenCL platform - eg. AMD and Intel. */ "platform_index" : 1,

/*

• TLS Settings
• If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
• to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.
• use_tls - This option will make us connect using Transport Layer Security.
• tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
• tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it. */ "use_tls" : false, "tls_secure_algo" : true, "tls_fingerprint" : "",

/*

• pool_address - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.
• wallet_address - Your wallet, or pool login.
• pool_password - Can be empty in most cases or "x". */ "pool_address" : "pool.etn.spacepools.org:5555", "wallet_address" : "etnk6XRwWXxG4HAUU2Tqv11KzX1updG1yeqgj16qQ7wHYjcqsHi2wYH31p9RW8SE578EkaPk94dqQPEA8Xq5bB6Y2AdncK9AWS", "pool_password" : "",

/*

• Network timeouts.
• Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make
• sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for
• nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -
• long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the
• server usually takes to process our calls.
• call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.
• retry_time - How long should we wait before another connection attempt.
• Both values are in seconds.
• giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners
• don't mine while the connection is lost, so your computer's power usage goes down to idle. */ "call_timeout" : 10, "retry_time" : 10, "giveup_limit" : 0,

/*

• Output control.
• Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal
• really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal
• performance monitors, there is very little reason to spew out pages of text instead of concise reports.
• Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.
• verbose_level - 0 - Don't print anything.
• 1 - Print intro, connection event, disconnect event
• 2 - All of level 1, and new job (block) event if the difficulty is different from the last job
• 3 - All of level 1, and new job (block) event in all cases, result submission event.
• 4 - All of level 3, and automatic hashrate report printing */ "verbose_level" : 3,

/*

• Automatic hashrate report
• h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.
• This option has no effect if verbose_level is not 4. */ "h_print_time" : 60,

/*

• Daemon mode
• If you are running the process in the background and you don't need the keyboard reports, set this to true.
• This should solve the hashrate problems on some emulated terminals. */ "daemon_mode" : false,

/*

• Output file
• output_file - This option will log all output to a file.

• */ "output_file" : "",

/*

• Built-in web server
• I like checking my hashrate on my phone. Don't you?
• Keep in mind that you will need to set up port forwarding on your router if you want to access it from
• outside of your home network. Ports lower than 1024 on Linux systems will require root.
• httpd_port - Port we should listen on. Default, 0, will switch off the server. */ "httpd_port" : 0,

/*

• prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?
• This setting will only be needed in 2020's. No need to worry about it now. */ "prefer_ipv4" : true,

[koventheboy]

even I shut down the internal graphic in the setting it still has the same problem,

[psychocrypt]

please download the latest release https://github.com/fireice-uk/xmr-stak/releases We switched the reposetory and unified our miner.

[koventheboy]

Thank you very much. Is it suitable to mine Electroneum?

[flicksterdoo]

according to this post from Nov, it should be working. going to try it out myself here in a few.

#266